How to use Port to make a connection between Import Server and Source

Hi guys,
I wanna make a Import Server and Manager work with a MDM Repository and a Client System. I want the Import Server could listen the port, whenever the Client System want to sent some files to the Import Server, the Server could automatically import files.
I know how to import a file by hand, but how to make it automatical? Use Port in Type?
Regards
Wang Yu
Message was edited by: Yu Wang

Hi,
You can automate the Import or Syndication process using Ports.
Requirements:
1. Import Server need to be Installed.
2. Client Systems need to be defined for the repository.
3. Create the Port with type Inbound (for Import process). OutBound (for Syndication process)
4. Associate a predefined map with the Port.
Note:
Each port is associated with only one map.
While creating the ports, When you select the client system, it only populates the maps defined for that client system.
Make sure if you want to use the same client system for both import and syndication.
Specify the Client system type as "Inbound/Outbound"
Steps involved:
Using MDM Console, In the repository Admin section
1. Select Client Systems-> this is where you have to define the Client Systems , which you are going to use for the ports.
Make sure you have define the Import Maps for the specific repository,specific Client System using Import Manager.
2. Select Ports->This is where you create Port and other related information related to it.
Once the Port is created, You see a specific directory structure created in the MDM Server installation directory
<<MDM Server Install_Dir>> ->Distributions -> <<DBMSHOST_DBMS_TYPE>> -> <<Repository Name>> ->
<<Port Type>> -> <<Client System ID>> ->
<<Port Code>>
Under the above sturcture it will have the following directories
-> Ready
-> Archive
-> Status
-> Log
Ready Folder :
-> In Import Process the import Server will pick up the file from this directory based on the specifc interval you specify in mdis.ini file(This can be found in Import Server installation directory).
Archive Folder:
-> Once the file is picked by the Import Server from Ready folder and if it is processed then the file will be moved to this di
rectory with some date stamp suffixed.
Log Folder:
->Log information for that process
Status Folder:
->Status of process will be kept in this folder.
Hope this helps.
Thanks and Regards
Subbu

Similar Messages

TS3274 not able to make Bluetooth connection between my Ipad and Iphone.

I am unable make Bluetooth connection between my Ipad3 and Iphone 4S.

You can't!
Alternativley you can use DropBox to send items over WiFi (free) or sync both with iTunes and drag & drop items in the Apps tab of each device.
<Edited By Host>

Can't make a connection between my tv and laptop

I can make a connection between my laptop and tv as far as being able to view the picture I have as my wallpaper on the tv, but that is all. If I change the wallpaper picture on my laptop it will change on the tv also, but again that is all I can do. That is far as I can get. Just a picture, no icons, no nothing. I have connected using a 15 pin cable on both ends. I have windows xp. There must be a setting in control panel, display or somewhere but I cannot find it.
HELP

Thanks, but that didn't work. Nothing happened. This time however I completely turned off the tv and computer. When I booted up the tv screen showed my password sign in screen. I entered my pass word, The screen momentarily showed my complete desktop, both wallpaper and icons but after about a second or two it blinked and then showed only my wallpaper as before. Puzzling. There has to be an answer somewhere.
Thanks for your help.

How can i make a connection between an application and a database over net

dear sir
how can i make connection between an appliction and a database over internet while the client side appliction is behind proxy and firewall
for example how the live update of norton antivirus makes connection to the data server to make comparetions and get new virus definitions
does that depend on sockets technology ?
what references can guide me to the solution please?

The ability to do so depends entirely on the JDBC driver implementation having some proxy method. It needs to recognize the HTTP or SOCKS proxy and use them to connect, and the firewall and proxy need to allow those specific port connections.
To the best of my knowledge, all of these update utilities, e.g. live update for Netscape, Norton, etc., do not connect directly to the database. As it is, no sane security person would allow a database to be exposed to the Net. Rather, they connect using HTTP or HTTPS, which normally traverses firewalls just fine, to connect to a Web or application server on the far end. That application server then parses the request and retrieves whatever it needs to from the database.
In other words, you cannot have a 2-tier client/server application. You need a 3-tier application:
your client -> Web/app server -> database
where the connection from your client to the Web/app server is over http or https through the firewall and proxies.
Hope this helps.
Avi
dear sir
how can i make connection between an appliction and a
database over internet while the client side
appliction is behind proxy and firewall
for example how the live update of norton antivirus
makes connection to the data server to make
comparetions and get new virus definitions
does that depend on sockets technology ?
what references can guide me to the solution please?

No connection between EIS Server and EIS Console

Hi AllWhile saving a meta model I get this error message:"There is currently no connection between the console and intgeration server. Ensure the server is running and try reconnecting"I have checked properly that EIS server is installed and also running, but don't know why throwing this errors...I am unable to save the metamodel....any suggestions ?Thanks in advance !

Any Help on this please!!!

How to make HTTP connection between a midlet and a php server?

As the title above, can anyone share how to make a HTTP connection between those 2? J2ME and PHP. Thanks a lot!

Can you be a little more specific on what you really want.
When i started doing j2me application, i was required to be able to comunicate to a oracle client database, and my first though was using PHP based pages to comunicate and do the query. Later they would just generate the answer and get it on the cellphone. You can communicate with a PHP server via either GET or POST. I'd choose POST as is more secure IMO.
Here are quite a good ammount of examples of how you can do it
http://www.java2s.com/Code/Java/J2ME/Networks.htm
They aren't PHP based examples, but you have can an idea of how it can be done

How to make optical connectivity between Catalyst 4948 and 10K router ?

Hi,
I am Ratheesh P D, network Manager of one project in Motorola. We have one catalyst 4948. Its going to get one 10K router. Our requirement needs optical connection between these two. The document of 4948 says, its compatible with 1000BaseX SFP and 10K is with 1000BaseSX SFP. Could you please tell me how to make these two compatible?

For information regarding the optical connectivity in 4948 cat switch follow the url ,
http://www.cisco.com/en/US/products/ps6021/products_installation_guide_book09186a008023fa89.html
For more information on h/w capability and connectivity of 10 k routers follow the url ,
http://www.cisco.com/univercd/cc/td/doc/product/aggr/10000/hdwr/index.htm

How many logical systems are required to connect between one XI and R3 sytm

Hi Experts,
I need to know how many Logical systems we need to create when connecting an SAP XI and SAP R3 system.
details wht I configured is as follows :
For XI : LOGSYSXI assigned to 100 client
For R3: LOGSYSR3 assigned to 800 client.
Do I need to create two log'cal systems on one side?
How many logical systems can a Client can support simultaneously? is it only one or more that one?
THANKS IN ADVANCE.
Sunil K Shetty

Hi,
>>>>I need to know how many Logical systems we need to create when connecting an SAP XI and SAP R3 system.
as you've noticed you only need 2 - one for r3 one for XI
this is enough
also shown in my book:
<a href="/people/michal.krawczyk2/blog/2006/10/11/xi-new-book-mastering-idoc-business-scenarios-with-sap-xi">Mastering IDoc Business Scenarios with SAP XI</a>
>>>>How many logical systems can a Client can support simultaneously?
one per client
but you can create as much as you wish
wihtout connecting them to a client
but use one for XI
Regards,
michal
<a href="/people/michal.krawczyk2/blog/2005/06/28/xipi-faq-frequently-asked-questions">XI / PI FAQ - Frequently Asked Questions</a>

Can't make a connection between Apple TV and Epsom projector?

When i set this up the screen opens fine for about 5 seconds (apple icon visible) but then disappears and subsequently blinks between a blank screen and the default projector home screen. The epsom projector doesnt have hdmi so i use a VGA adapter to connect the Apple TV to the vga cable. by the way, i have ruled out hardware probs as the vga cable works fine connected to a PC, plus te Apple TV works on a Hdmi projector in the building. has anybody had similar experience, or wisdom on this? thanks

could be 2 things
1. the appletv default use a resolution the projector dont support
solution is to connect it to somethign which does and lower the appletv resolution
2. it's a hdcp issue as VGA don't support hdcp http://en.wikipedia.org/wiki/High-bandwidth_Digital_Content_Protection

Constant Connection Between Mail Server and RIM Server

Hi,
I'm a newbie in need for some advise about Blackberry Email Account
I am currently having a problem at the office. Since January 2012, our outgoing bandwidth is increasing in constant rate and it is steadily high at current time. Here are some of my findings:
there is a constant connection to port 993 (IMAPS that's being used by blackberry email account)
the constant connection is leading to RIM IP and XO Communication
the bandwidth outgoing usage is constant (at about 2.5Mbps approximately)
Our user has started setting up their office email on their personal Blackberry devices
This is causing some concern regarding our company email, does some of the email accounts got infected by virus? Please help me out with this, it might not be a normal case, but any advice to solve this problem will be highly appreciated.
Thank you,
Sandy

IMAP will be connected all the time and there has never been a BlackBerry virus.
Mail Clients will connect at all times if left on.
Do you want to block this access?
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

How to make a connection between an application and a Coherence Grid?

Hello,
We're starting with Oracle Coherence.
How do I connect an application (for example running in JDeveloper) to an existing grid?
I used the following tutorial to get started with Coherence.
http://www.oracle.com/technology/pub/articles/vohra-coherence.html?msgid=6521631
Within JDev an Coherence instance is started, data is entered and queried.
Next I'd like to connect this to a running Coherence instance, (started with [Coherence home]\bin\coherence.cmd)
When I start the coherence.cmd and run the application from within JDev, I can see a connection is made
Map (?):
2008-05-13 13:15:24.667 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member(Id=5, Timestamp=2008-05-13 13:15:24.484, Address=10.35.1
4.150:8090, MachineId=10134, Location=process:4612@WBNL71033) joined Cluster with senior member 1
Map (?):
2008-05-13 13:15:24.934 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 joined Service DistributedCache with senior member 5
Map (?):
2008-05-13 13:15:25.630 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 left service DistributedCache with senior member n/a
2008-05-13 13:15:25.630 Oracle Coherence GE 3.3.1/389 <D5> (thread=Cluster, member=4): Member 5 left Cluster with senior member 1
I am, however, not able to retrieve the data which is entered via JDev.
(1) What do I need to do to distribute the data entered via the Jdev application to the Coherence grid
(2) How can I get access to the data within the Coherence Grid(do I need to to change the Cache, Map or something else)?
Thanks in advance
Regards Leon

Hi Leon,
In order to see the entries created by the sample application within JDev, you will need to do several things:
1. Ensure that at least one storage enabled Coherence node is running, by executing cache-server.cmd at least once (coherence.cmd starts storage-disabled console only).
2. Run coherence.cmd and change to the appropriate cache from the console:
Map (?): cache VirtualCache
(the name should be the same as the one defined in cache-config.xml and Java code)
3. Execute commands against the cache:
Map (VirtualCache): list
This should give you a list of all the entries within a VirtualCache.
HTH,
Aleks

How to use iPod to move purchased music between a Mac and a PC

I use a Mac at home and I work with a PC (unfortunately)
I want to use the new function that give you the opportunity to import in iTunes library the new purchased music from iPod.
In order to have both computer able to connect to the iPod I format iPod from PC (FAT32)...
But when I connect the iPod to my iMac, iTunes ask me if I want to format the iPod to be used with Mac.
If I reply NO, I can't see the iPod and then I can't import music.
What am I doing wrong?
Thanks
Max
iMac 24" - 2.16 Ghz - 2Gb Ram Mac OS X (10.4.8)

I suggest you post your question on an MS Office forum since it's their software you're having issues with.

Connection between sap server and client

I am useing 4.7, I am unable to connect server from a client.
It gives me an message "Partner not reached"
but from the client it is PINGING.

Hi Charles,
Which server is this? which client you are using? is it related to MDM?
Regards,
Mausam

Connectivity between Oracle database and client...

Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.

user11000521 wrote:
Hi guys,
I was asked to make a connection between oracle client and database via internet so that our clients can access the database from different parts of the country, and the data that is transmitted in the internet does not require security consideration. And I have successfully implemented this.
But later onwards they asked me to structure it in such a way so that clients must be able to select, insert, update and delete data offline, in case there is online connectivity problem.
So my question is, are there any possibilities in oracle to temporarily store data that are available in the oracle database to the client side and then later onwards transfer those datas once the clients are available online. Or are there any other alternative ways...
Additional Information - Client access the database through an application created by VB.
Please do help me on this project.
Thanks in advance for your help.
Asif.You probably should do a cost/risk analysis. Where you are headed might be able to be done (but it will require that the "clients" also have their own copy of the database) but it won't be easy and it certainly won't be cheap, either in initial implementation or in on-going maintenance. The alternative is to take a hard look at your network connections and see if it wouldn't be cheaper/easier to be able to ensure that it is reliable. Remember "the internet" won't break, it is highly redundant. If you have connectivity issues, they will almost certainly be in your own equipment and configurations, so your (your organization) will have the ability to address and fix any issues there.

How do I make a connection to SQL Server Express using SQL Developer 1.5.3?

How do I make a connection to SQL Server Express using SQL Developer 1.5.3, if it's possible at all?
Also, I received a SQL Server dump file of some sort. Is there any way to read this file in SQL Developer and migrate the db to Oracle? Unfortunately I don't have raw DDL and DML for this database--just some sort of a binary dump file from SQL Server.
Thanks.
Dana

Are you using SQL Developer 1.5.3 or 1.5.4?
If using an older version (i.e. 1.5.3), then you'll have to add a DLL to your environment. This is [ntlauth.dll].
If you don't find this DLL in your SQL Developer directory, then obtain the JDBC SQL SERVER Pluggin (jtds-1.2.2-dist.zip) from:
http://sourceforge.net/project/showfiles.php?group_id=33291&package_id=25350
Copy the ntlmauth.dll in the ...\\...\ide\lib directory (no need to register it).
Note: this approach should work if using DQL Developer 1.5.3 and SQL Server Express 2008
Regards,
M. R.

How to use Port to make a connection between Import Server and Source

Similar Messages

Maybe you are looking for