How to use the structure on my insert statement.

I have a function and returning a structure:
<CFSET stLoc_and_AttIDs=StructNew(1)>
<CFSET
stLoc_and_AttIDs["LocID"]="#getLocID.LocationID#">
<CFSET
stLoc_and_AttIDs["AttID"]="#getLocID.AttachmentID#">
I call this function like this:
<CFSET LocAndAttIDs= MyFunction(LocName)>
I'm having difficulty in refering to the values of this
structure in my insert statement:
I'm doing it this way and got error, I'm sure I didn't do it
right, please help.
Insert Into MyTable (Column1, Column2, Column3, .....)
VALUES (#LocAndAttIDs.stLoc_and_AttIDs["LocID"]="#,
#LocAndAttIDs.stLoc_and_AttIDs["AttID"], 23)

is that the actual code? if so, it looks like your # aren't
matched up properly. for example, i count 3. there should be an
even number :)
you don't seem to have a closing # after the 2nd variable,
and the closing # for the first variable seems to be a little....
late. it should be after the closing bracket ( ] ), since that's
where the variable name ends.

Similar Messages

How to use the structure in the EXIT_SAPMM06E_013 function module

Hello Experts,
Please guide me how to use the structure defined in function modules under table tab in the driver program for smart form to fetch the data. Please post some sample code if available.
Best Regards,
Sandesh.Sreyamsh

Can you please elaborate little bit more what is the actual requirement?

How to use the structure RCTAV?

How to get demensions of a material in picking list using the structure RCTAV, is there any function module, please reply immediately.

Hi
Use the following BAPI's:<b>
BAPI_OBJCL_GETDETAIL
or use the fun module:
CLAF_CLASSIFICATION_OF_OBJECTS</b>
to get the characteristic values for a material
or use the tables AUSP, CABN etc for this
Reward points for useful Answers
Regards
Anji

How to use a structure at run time....

Hi gurus,
I am confused on how to use the structure in our report..why do we need it...Please help me with that...
Thanks
Cheers:Jim

Or you could simply use a structure in your program to group like fields together. So that you could maybe clear them all at one shot.
For example, say that you have a structure with fields a - z.
data: begin of structure,
        fielda type c,
        fieldb type c,
        fieldc type c,
        fieldz type c,
        end of structure.
So in your program, it is now important for you to clear these fields, if you would have defined them one by one without the structure, you would have to list them all in your CLEAR statement, but instead, since you have them in a structure, you can some say....   CLEAR STRUCTURE.
Regards,
Rich Heilman

How to use the "split development directory structure" in JBuilder9 ?

How to use the "split development directory structure" in JBuilder9 ?
Have /APP-INF supported ?

I've not used JBuilder much, but if it has ant support, then it should
be pretty straight-forward.
-- Rob
Rick Ni wrote:
How to use the "split development directory structure" in JBuilder9 ?
Have /APP-INF supported ?

How to use the implementation class in propetty pallete

Hi,
I am using forms 10g....I have to insert horizontal scroll bar in text item..
I have only class files instead of jar files ...how cani place the class file instead of jar file...
How to use the implementation class in property palette to display the PJC
Thanks,
Ansaf.

The Implementation Class must reflect the full name of the class. For instance, if the full class name is : xx.yyy.zz.class_name, then put this in the Implementation Class property of the corresponding item.
Also, the class must be stored in the equivalent directory structure, so that, in my example: <DEV_HOME>/forms/java/xx/yyy/zz
Francois

How to use the same POWL query for multiple users

Hello,
I have defined a POWL query which executes properly. But if I map the same POWL query to 2 portal users and the 2 portal users try to access the same page simultaneously then it gives an error message to one of the users that
"Query 'ABC' is already open in another session."
where 'ABC' is the query name.
Can you please tell me how to use the same POWL query for multiple users ?
A fast reply would be highly appreciated.
Thanks and Regards,
Sandhya

Batch processing usually involves using actions you have recorded. In Action you can insert Path that can be used during processing documents. Path have some size so you may want to only process document that have the same size. Look in the Actions Palette fly-out menu for insert path. It inserts|records the current document work path into the action being worked on and when the action is played it inserts the path into the document as the current work path..

JNI - How to use the error reporting mechanism?

I've developed a C++ DLL which is loaded from a commercial Win32 application (not written by me) as a plug-in for external calculations. On its initialization the C++ DLL launches the Java VM via the JNI invocation interface. When the DLL functions are called by the application, they forward the calls to Java objects inside the Java VM, again via JNI invocation interface.
This works well, but I have encountered a weird error.
From Java I open a JFrame containing a JTextArea as small console for debug output messages. If I turn output to this debug console off (my printToConsole routine checks whether a boolean flag is set), the string concatenation operator may lead to a crash of the Java VM.
For example, if in one of the Java functions called from the
DLL via JNI invocation interface the following is the first statement,
it leads to a crash of the Java VM and the application that loaded the C++ proxy DLL.
String test=""+Math.random(); // String test not used later
Interestingly, if I comment this statement out, the Java code works fine WITHOUT any crash. I've already thought about potential races and synchronization issues in my code, but I don't see where this is the case. And the string concatenation error fails as well, if I insert sleep() statements in front of it and at other places in the code. However, if I turn on log messages printed to my JFrame debug console (containing a JTextArea), the String concatenation works without problems.
So maybe the JNI interface has a bug and affects the Java VM; I don't see where my JNI code is wrong.
One problem is that I do not get any stdout output, as the C++ proxy DLL is loaded by the Windows application, even if I start the Windows application from the DOS command line (under Windows).
Does anyone know how to use the error reporting mechanism?
http://java.sun.com/j2se/1.4.2/docs/guide/vm/error-handling.html
Is it possible that the JVM, when it crashes, writes debug information about the crash into a file instead of stdout/stderr?
My C++ proxy DLL was compiled in debug mode, but the commercial application (which loaded the DLL) is very likely not.
I do not know hot to find the reason why the String concatenation fails inside the Java function called from the C++ DLL via JNI.

Yes, I've initially thought about errors in the C++ code too. But the C++ code is actually very simple and short. It doesn't allocate anything on the C++ side. It allocates a couple of ByteBuffers inside the Java VM however via JNI invocation interface calls of env->NewDirectByteBuffer(). The native memory regions accessed via the ByteBuffers are allocated not by my own C++ code, but by the program that calls my DLL (the program is Metastock).
The interesting thing is that everything works fine if output to my debug console is enabled, which means that in the Java print routine getConsoleLoggingState() returns true and text is appended to the jTextArea.
static synchronized void print(String str)
{ MetaStockMonitor mMon=getInstance();
if ( mMon.getFileLoggingState() && mMon.logFileWriter!=null) {
mMon.logFileWriter.print(str);
mMon.logFileWriter.flush();
if ( mMon.getConsoleLoggingState() ) {
mMon.jTextArea1.append(str);
Only if output to the JTextArea is turned off (ie. getConsoleLoggingState()==false), the crash happens when the FIRST statement in the Java routine called via JNI invocation interface is a (useless) String concatenation operation, as described above.
String test=""+Math.random(); // String test not used later
Moreover, the crash happens BEFORE the allocated ByteBuffer objects are accessed in the Java code. But again, if console output is turned on, it works stable. If console output is turned off, it works when the (useless) String concatenation operation is removed in the Java routine called from C++.
I've already thought about potential races (regarding multiple threads), but this can be ruled out in my case. It almost appears as if the JVM can have problems when called by the invocation interface (I tested it with Java 1.4.2 b28).
All the calls between C++ and Java go ALWAYS in the direction from C++ code to Java. Unfortunately, there is no special JRE version with extensive logging capabilities to facilitate debugging. And the problem is not easily reproducible either.
JNIEnv* JNI_GetEnv()
JNIEnv *env;
cached_jvm->AttachCurrentThread((void**)&env,NULL);
fprintf(logfile,"env=%i\n",env);
fflush(logfile);
return env;
// function called by Metastock's MSX plug-in interface
BOOL __stdcall createIndEngine (const MSXDataRec *a_psDataRec,
const MSXDataInfoRecArgsArray *a_psDataInfoArgs,
const MSXNumericArgsArray *a_psNumericArgs,
const MSXStringArgsArray *a_psStringArgs,
const MSXCustomArgsArray *a_psCustomArgs,
MSXResultRec *a_psResultRec)
a_psResultRec->psResultArray->iFirstValid=0;
a_psResultRec->psResultArray->iLastValid=-1;
jthrowable ex;
jmethodID mid;
JNIEnv* env=JNI_GetEnv();
jobject chart=getChart(env, a_psDataRec);
if ( chart==NULL) {
return MSX_ERROR;
jobject getChart (JNIEnv* env, const MSXDataRec *a_psDataRec)
jthrowable ex;
jmethodID mid;
int closeFirstValid, closeLastValid;
closeFirstValid=a_psDataRec->sClose.iFirstValid;
closeLastValid=a_psDataRec->sClose.iLastValid;
long firstDate, firstTime;
if (closeFirstValid>=1 && closeFirstValid<=closeLastValid) {
firstDate = a_psDataRec->psDate[closeFirstValid].lDate;
firstTime = a_psDataRec->psDate[closeFirstValid].lTime;
} else {
firstDate=0;
firstTime=0;
jclass chartFactoryClass = env->FindClass("wschwendt/metastock/msx/ChartFactory");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find class ChartFactory\n");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetStaticMethodID(chartFactoryClass, "getInstance", "()Lwschwendt/metastock/msx/ChartFactory;");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getInstance()\n");
printSBufViaJava(sbuf);
return NULL;
jobject chartFactory=env->CallStaticObjectMethod(chartFactoryClass, mid);
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getInstance()");
printSBufViaJava(sbuf);
return NULL;
mid = env->GetMethodID(chartFactoryClass, "getChartID", "(Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;Ljava/nio/ByteBuffer;IIIIIII)F");
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot find method ID for ChartFactory.getChartID()\n");
printSBufViaJava(sbuf);
return NULL;
jobject symbolBuf=env->NewDirectByteBuffer(a_psDataRec->pszSymbol, strlen(a_psDataRec->pszSymbol) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate symbolBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityNameBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityName, strlen(a_psDataRec->pszSecurityName) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityNameBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityPathBuf=env->NewDirectByteBuffer(a_psDataRec->pszSecurityPath, strlen(a_psDataRec->pszSecurityPath) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate securityPathBuf\n");
printSBufViaJava(sbuf);
return NULL;
jobject securityOnlineSourceBuf=env->NewDirectByteBuffer(a_psDataRec->pszOnlineSource, strlen(a_psDataRec->pszOnlineSource) );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Cannot allocate onlineSourceBuf\n");
printSBufViaJava(sbuf);
return NULL;
// Java Function call leads to crash, if console output is turned off and
// the first statement in the Java routine is a (useless) string concatenation.
// Otherwise it works stable.
jfloat chartID=env->CallFloatMethod(chartFactory, mid, securityNameBuf, symbolBuf,
securityPathBuf, securityOnlineSourceBuf, (jint)(a_psDataRec->iPeriod),
(jint)(a_psDataRec->iInterval), (jint)(a_psDataRec->iStartTime),
(jint)(a_psDataRec->iEndTime), (jint)(a_psDataRec->iSymbolType),
(jint)firstDate, (jint)firstTime );
if (ex= env->ExceptionOccurred() ) {
env->ExceptionDescribe();
env->ExceptionClear();
sprintf(sbuf, "DLL: Exception while calling ChartFactory.getChartID()");
printSBufViaJava(sbuf);
return NULL;

How to use the Output clause for the updated statment

How to use the output clause for the below update stament,
DECLARE @MyTableVar table(
sname int NOT NULL)
update A set stat ='USED'
from (select top 1 * from #A
where stat='AVAILABLE' order by sno)A
Output inserted.sname
INTO @MyTableVar;
SELECT sname
FROM @MyTableVar;
Here am getting one error incorrect syntax near Output
i want to return the updated value from output clause

see
http://blogs.msdn.com/b/sqltips/archive/2005/06/13/output-clause.aspx
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

How to use the Columns Hidden | space in the bottom of af:panelCollection?

Hi,experts,
In jdev 11.1.2.3,
I can see a row of Columns Hidden | Columns Frozen in the bottom of component af:panelCollection - pc1 which have an af:table - t1 component inside in designer view,
and can see there is a blank row space only with "|" inside when the page is running.
Now I want to use this blank row space such as to display row numbers for the table, so I set the property for the panelColletion as following source code:
==========================
<af:panelCollection id="pc1" inlineStyle="width:1250px; height:500px;">
<f:facet name="menus"/>
<f:facet name="toolbar"/>
<f:facet name="statusbar">
<af:group id="g4"/>
</f:facet>
<af:table value="#{bindings.TView1.collectionModel}" var="row"
rows="#{bindings.TView1.rangeSize}"
emptyText="#{bindings.TView1.viewable ? 'No data to display.' : 'Access Denied.'}"
fetchSize="#{bindings.TView1.rangeSize}" rowBandingInterval="1"
filterModel="#{bindings.ImplicitViewCriteriaQuery.queryDescriptor}"
queryListener="#{bindings.ImplicitViewCriteriaQuery.processQuery}" filterVisible="false"
varStatus="vs"
selectedRowKeys="#{bindings.TView1.collectionModel.selectedRow}"
selectionListener="#{bindings.TView1.collectionModel.makeCurrent}"
rowSelection="single" id="t1" inlineStyle="font-size:xx-large; font-weight:bolder;">
<af:column sortProperty="#{bindings.TView1.hints.GoodsStatus3.name}" filterable="true"
sortable="true"
headerText="#{bindings.TView1.hints.GoodsStatus3.label}"
id="c42">
<af:outputText value="#{row.GoodsStatus3}" id="ot33"/>
</af:column>
<f:facet name="footer">
<af:group id="g3">
*<af:outputText value="RowsNumber：" id="ot44"/>*
*<af:outputText value="#{bindings.TView1Iterator.estimatedRowCount}"*
id="ot43" partialTriggers="::pc1:t1"/>
</af:group>
</f:facet><f:facet name="detailStamp"/>
</af:table>
</af:panelCollection>
=====================
but when run the page there is no display for the row number, instead on the bottom of the table, there is only a blank row with "|" inside.
How to use the Columns Hidden | Columns Frozen space in the bottom of component af:panelCollection ?
Thanks!

Hi, Arun
It works.
As in my use case, can draw an af:toolbar component into statusbar of Panel Collection facets in Structure view.
There is still a small issue:
cannot see the Columns Hidden|Columns Frozen component in the Structure view,
and if drop more than one af:toolbar into statusbar, the sencond one will fall/wrap into second row, even though there is enough space on the first row (to occupy a second row in statusbar will be a waste of space), and cannot see how to adjust.
Thank you very much!
bao

How to use the updated value in the same update statement

Hello,
I just wonder how to use the updated new value of other column in the same udpate statement. I am using Oracle 11.2, and want to update the two columns with one update statement as following:
create table tb_test (id number(5), tot number(5), mon_tot number(5));
update tb_test set (tot = 15, mon_tot = tot *15) where id = 1;
...I would like to update both tot and mon_tot column, the value of mon_tot shall be determinted by the new value of tot.
Thanks,
Edited by: 939569 on 1-Feb-2013 7:00 AM

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to use the text module in script

hi,
i script how to use the text modules and how to write the code in layout of the script?

Hi,
You canr use text modules in script. You have to use standard texts .
Standard text are maintained in SO10 transaction.
you can create translation text for other languages also . So based on logon language it will print translation text.
go to SO10
give textname it say Ztextname id as ST and language as EN
say create, then you will get editor there maintain your text and save it . then come back . Now change language (say for german DE) say create and eneter translation text and save it.
so now you have created a text called ztextname which you can use in your script.
Inorder to insert the texts in your script do as below
go to any window editor and select path
Insert->texts->symbols->standard symbols
then you will get popup in which you have to mention all the parameters that you have created earlier.
after inserting just change language EN to sy-langu
Reward points if useful
About text elements Sravan already given some informatiomn
Regards,
Nageswar

HOW TO: Use the XML parser in Oracle 8.1.7

I am trying to figure out how to use the xml parser provided in oracle 8.1.7. all i want to do is parse a xml report that is defined using a schema, and place the data into the proper tables. i am totally unfamiliar with the xml parser and how it works. i have done some reading on the subject, but seem to be getting some conflicting infromation about which utilites i need and how to invoke them. can someone please tell me what utilities i need, how to invoke them, and what i need to do to get a xml document to parse and insert to a table? I would greatly appreciate any help anybody could offer. thanks.

You can parse the XML Document with XML Parser and place the data into database using XSU(XML SQL Utility).
Both of these are included in XDK for Java at:
http://otn.oracle.com/tech/xml/xdk_java
The following document could also help:
Oracle9i XML Developer's Guide--XDK [PDF] at http://otn.oracle.com/tech/xml/doc.html

How to use the change log in ODS to track Delta change?

People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
Thanks

Kevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat

How to use the prompted value in the filter expression

Hi
Is it possible to use the prompted value in the filter expression?
My requirement is that user will be prompted for a date field and I need to filter the records such that the records are displayed for the last 5 weeks from the date entered by the user.
If somehow I know how to use the prompted value in the filter expression then this requirement is easy to be done. If this is possible, please guide me?
If there are other ways to acheive the desired results then please suggest.
Thanks
-Jaz

Edit: example added
SQL> create table tb_test
2 ( id number(5)
3 , tot number(5)
4 , mon_tot number generated always as (tot*15) virtual
5 );
Table created.
SQL> insert into tb_test (id, tot) values (1, 5);
1 row created.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1          5         75
1 row selected.
SQL> update tb_test
2 set    tot = 15
3 where id = 1;
1 row updated.
SQL> select * from tb_test;
        ID        TOT    MON_TOT
         1         15        225
1 row selected.

How to use the structure on my insert statement.

Similar Messages

Maybe you are looking for