How to use vpd to restrict rows by application and schema_name?

We have a need to reuse a schema name many times in a test/dev. environment. Normally we just create a new instance so development can test their apps. using the same schema_name, let's call it test_user. This is very tedious and time consuming to create many db's and sometimes we don't have the hardware to support so many db's. So I was wondering if I could use vpd and an application_context to restrict the rows & columns that can be seen. But instead of restricting it by schema_name I want to restrict it by schema_name and another env. variable like app_name or something similar. So when the middle layer connects with test_user user name and the app is called accts_payable they see parts of the rows that pertain to them. But if the middle layer connects with the test_user user name and the app is called accts_payable2 they see completely different rows. Any help would be appreciated.
Thanks,
George

I was hoping someone else had already been down this path so I don't have to re-invent the wheel. But it looks like I'm going to go down that path. I did find something in the manual that may help but again it's not exactly what I was hoping for so I will have to test it. It mentions using dbms_session to set the application name in the environment like this:
Consider the application server, AppSvr, that has assigned the client identifier 12345 to client SCOTT. It then issues the following statement to indicate that, for this client identifier, there is an application context called RESPONSIBILITY with a value of 13 in the HR namespace.
DBMS_SESSION.SET_CONTEXT( 'HR', 'RESPONSIBILITY' , '13', 'SCOTT', '12345' );
Thanks for your help on this. If anyone else has been through a similar situation please reply.
Thanks,
George

Similar Messages

How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?

Hi All,
Hope to you a very happy new year,
I have two differnt LAP 1300 and 1200 in my network and I need to add theme to the WLC,
I successed to add one of theme by the option 60 in the DHCP pool at the Core SW,
So my quetion is below:
How to use multiple VCI strings for lap 1300 and 1200 (option 60) in one pool?
Thanks in Advanced,
Ahmed,

To add to Scott's post. Option 60 would be useful if you needed to put certain types of AP on specific controllers. Otherwise, no real need to use it for the most part.
Though, I do recall an issue a few years ago that some windows machines had issues getting DHCP if option 43 is being returned.
Now, on an IOS switch, you can only configure one option 60 per DHCP scope
HTH,
Steve
Please remember to rate useful posts, and mark questions as answered

How to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0)

Hi all,
I'd like to know if it's possible and how to use JavaMail 1.4 with Oracle Application Server 10g (9.0.4.0.0), Windows version.
With the following code, I can see that the mail.jar used by the server is the one included in the jdk installation :
// I'm testing InternetAddress.class because I want to use commons-email-1.2.jar that requires mail.jar 1.4 (or higher) and activation.jar 1.1 (or higher)
// and I know that inside the commons-email-1.2.jar file, I need to call the InternetAddress.validate() method that throws a java.lang.NoSuchMethodError: javax.mail.internet.InternetAddress.validate()V if it is used with mail.jar 1.2.
Class cls = javax.mail.internet.InternetAddress.class;
java.security.ProtectionDomain pDomain = cls.getProtectionDomain();
java.security.CodeSource cSource = pDomain.getCodeSource();
java.net.URL location = cSource.getLocation();
System.out.println(location.toString());
This code returns : file:/C:/oracle/app/jdk/jre/lib/ext/mail.jar and this mail.jar file has an implementation version number: 1.2
- I've tried to include my own mail.jar (1.4.2) and activation.jar (1.1.1) files in the war file that I deploy, but it doesn't work (the server still uses the same mail.jar 1.2)
- I've tried to put the mail.jar (1.4.2) and activation.jar (1.1.1) files in the applib directory of my OC4J instance, but it doesn't work (the server still uses the same mail.jar 1.2)
- I know that a patch exists : I've read the following document: How to Make Libraries such as mail.jar and activation.jar Swappable ? [ID 552432.1]
This article talks about the Patch 6514136, but this patch only applies to : Oracle Containers for J2EE - Version: 10.1.3.3.0
Can you please help me ?
Thanks in advance for your answers,
Laurent

I strongly suggest to upgrade to AS 10.1.3 to get this.
Think of future support of AS 9.0.4. You will get not critical patch updates anymore.
--olaf

How to use the admin user account in reports and dashboards?

Hi Everyone,
I want to use the admin user account in report and dashboard connections. But the Hyperion is automatically using the current user's credentials to fetch data.
Hyperion 11.1.1.1
Thanks
Syantan

This has been posted in the essbase forum > How to use the admin user account in reports and dashboards?
Cheers
John
http://john-goodwin.blogspot.com/

SSHR reskin AKA 'How to Use Adobe Flash to Transform the Look and Feel...

There was a presentation at the OHUG 2011 Conference titled 'How to Use Adobe Flash to Transform the Look and Feel of Oracle HR Self Service'. It presented a method of 're-skinning' SSHR to present a different UI to the user.
Looking for anyone out there that has attempted to apply this to their Oracle HRSS pages. I know this company has developed (is developing?) a product based on this approach. I want to see if anyone has done it on their own and would be willing to share some details.
Follow-up question. Has anyone availed themselves of the bespoke UI Development based on this approach from Applaud Solutions (as mentioned on their website), and care to comment on your experience?

Any update on this please? Even we are looking for some pointers in this area.

How to use debug my jdevloper devloped jsp applications using tomcat 4.0?

hello,
how to use debug my jdevloper devloped jsp applications using tomcat 4.0?
how to run with using tomcat path with browser?
can any one help?
thanks
pullareddy

Hi Pullareddy,
Charles' answer will work for Servlets in Tomcat, but debugging JSPs is a bit more complicated than debugging Servlets.
Here's what you need to do:
(I don't have Tomcat, so I don't know the details of Tomcat configuration files and I can't guarentee that Tomcat provides the flexibility so that you can configure it for debugging JSPs. Each application server is configured a bit differently. Hopefully you can adjust the following instructions to Tomcat.)
1. You need to replace Tomcat's JSP engine with OJSP and you need to setup debugging parameters for OJSP.
This is not specifically in the JDev documentation, but you may be able to apply the information found in the topic "Remote Debugging in OC4J".
Here are some tips:
A. You'll probably need to specify the following jars in some Tomcat config file: ojsp.jar, ojsputil.jar, xmlparserv2.jar, ojc.jar, and jdev-rt.jar.
B. The OJSP class name is oracle.jsp.runtimev2.JspServlet.
C. The debug parameters are:
debug_mode = true
developer_mode = true
encode_to_java = true
emit_debuginfo = true
jspjavacompiler = oracle.jdevimpl.jsp.JspOjcCompiler
2. You need to make Tomcat start the Java command with debugging options. (This is what Charles was talking about. One of the debug options is -XXdebug). This is in the JDev documentation in the topic "Starting a Java Process in Debug Mode". Please read that documentation help topic.
3. You need to delete any old .java or .class files which were created in the past for your JSP. If you leave old .java or .class files around, then the debugger may not be able to stop at breakpoints in your JSPs. So, be sure to clean up old files.
4. Set your project settings for remote debugging. This is on the Debugger - Remote panel in the Project Settings dialog box. You probably want either Attach to OJVM or Attach to JPDA. Which radio button you choose depends on what command line options you specified in step 2.
-Liz

How to use left outer joins ,right outer joins and order by clause for belo

Hi,
How to use left outer joins ,right outer joins and order by clause for below XML query.
The query which is red colour returns null then its not displaying any values for columns in that tables. Tried decode, nvl function hasn't worked.
SELECT XMLAGG ( XMLELEMENT( "P", XMLFOREST( P.process_id AS Ppid,
          (SELECT XMLAGG( XMLELEMENT( "PI", XMLFOREST( PI.question_id AS PIqid,
                                   PI.process_id AS PIpid,
PI.innertext AS
                                   PItext, PI.itemtype AS PItype,
                                   PI.linkfrom AS PIfrom,
                                   PI.linkto AS PIto,
PI.associated AS PIas,
                                   PI.content_id AS PIc,
                                   PI.exitpoint1_id AS PIe1,
                                   PI.exitpoint2_id AS PIe2,
                                   PI.exitpoint3_id AS PIe3,
                                   PI.followoncall AS PIfoc,
PI.userinput AS PIui,
                                   PI.resolveidentifier AS PIri,
PI.libquestion_idfk AS PIlqid,
                                   PI.isLocked AS PIstls,
                                   PI.PreviousAnswer AS PIPAns,
                                   PI.VisibleToAgent AS PIVAgent,
                                   PI.RetryAttempt AS PIRetry,
                                   PI.Tags AS PITag,
                              SELECT XMLAGG( XMLELEMENT( "PO", XMLFOREST( PO.option_id AS POoid,
                                   PO.question_id AS POqid,
                                                       PO.process_id AS popid,
                                                       PO.opt_innertext AS POtext,
                                                       PO.opt_linkfrom AS POfrom,
                                                       PO.opt_linkto AS POto,
                                                       PO.libquestion_idfk AS POlqid,
                                                       PO.liboption_idfk AS POloid ) ) )
                              FROM vw_liveProcessOption_Sim_v6 PO
                                   WHERE PI.question_id = PO.question_id (+)
                              AND PI.process_id = PO.process_id (+)
                              ) "A" ) ) ) AS "PO"
     FROM vw_liveProcessItem_Sim_v6 PI
          WHERE P.process_id = PI.process_id
          ) "A" ) ) ) AS "PI"
FROM liveProcess_ec P
WHERE (P.process_id = 450)
Any help really appreciated.
Thanks

user512743 wrote:
Hi,
Here below is the scripts of tables, insert statements and Required output.
CREATE TABLE VW_LIVEPROCESSOPTION_SIM_v6
(     "OPTION_ID" NUMBER,
     "QUESTION_ID" NUMBER(10,0),
     "PROCESS_ID" NUMBER(10,0),
     "OPT_INNERTEXT" VARCHAR2(200 CHAR),
     "OPT_LINKFROM" VARCHAR2(20 CHAR),
     "OPT_LINKTO" VARCHAR2(20 CHAR),
     "LIBQUESTION_IDFK" NUMBER,
     "LIBOPTION_IDFK" NUMBER
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,2,450,'Yes',null,'5',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,3,450,'Yes',null,'5',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,5,450,'Yes',null,'6',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,6,450,'Yes',null,'7',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,8,450,'Block All',null,'9',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,9,450,'Yes',null,'10',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,11,450,'Yes',null,'12',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,12,450,'Yes',null,'13',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (1,14,450,'Yes',null,'16',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,2,450,'No',null,'3',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,3,450,'No',null,'4',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,5,450,'No',null,'8',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,6,450,'No',null,'8',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,8,450,'Standard',null,'11',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,9,450,'No',null,'11',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,11,450,'No',null,'14',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,12,450,'No',null,'14',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (2,14,450,'No',null,'15',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (3,8,450,'Disabled',null,'12',null,null);
Insert into VW_LIVEPROCESSOPTION_SIM_v6(OPTION_ID,QUESTION_ID,PROCESS_ID,OPT_INNERTEXT,OPT_LINKFROM,OPT_LINKTO,LIBQUESTION_IDFK,LIBOPTION_IDFK) values (4,8,450,'User Defined',null,'12',null,null);
REATE TABLE "VW_LIVEPROCESSITEM_SIM_v6"
(     "QUESTION_ID" NUMBER(10,0),
     "PROCESS_ID" NUMBER(10,0),
     "INNERTEXT" VARCHAR2(200 CHAR),
     "ITEMTYPE" VARCHAR2(50 CHAR),
     "LINKFROM" VARCHAR2(500 CHAR),
     "LINKTO" VARCHAR2(500 CHAR),
     "ASSOCIATED" VARCHAR2(200 CHAR),
     "CONTENT_ID" NUMBER,
     "EXITPOINT1_ID" NUMBER(10,0),
     "EXITPOINT2_ID" NUMBER(10,0),
     "EXITPOINT3_ID" NUMBER(10,0),
     "RESOLVEIDENTIFIER" VARCHAR2(40 CHAR),
     "LIBQUESTION_IDFK" NUMBER(10,0),
     "FOLLOWONCALL" NUMBER(1,0),
     "USERINPUT" VARCHAR2(200 CHAR),
     "ISLOCKED" NUMBER(1,0),
     "PREVIOUSANSWER" NUMBER(1,0),
     "VISIBLETOAGENT" NUMBER(1,0),
     "RETRYATTEMPT" NUMBER(10,0),
     "TAGS" VARCHAR2(50 BYTE)
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (1,450,'CBB1015 - Router Firewall Settinngs Process','Title',null,'2',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (2,450,'Is the customers PC Firewall turned off?','Question','1','2.2,2.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (3,450,'Advise the customer to turn off the PC Firewall in order to continue. Has this been done?','Question','2.2','3.2,3.1',null,278,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (4,450,'Advise the customer the PC Firewall must be switched off before this process????','ExitPoint','3.2',null,null,null,14,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (5,450,'Is the customer able to access the internet now?','Question','3.1,2.1','5.2,5.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (6,450,'Is the customer having a problem with a specific website?','Question','5.1','6.2,6.1',null,null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (7,450,'1536: CBB1008 - Browser Setup and Daignostics','SubProcess','6.1',null,'1536-1-0',null,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (8,450,'What is the security level on the CPE Management page?','Question','6.2,5.2','8.4,8.3,8.2,8.1',null,279,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (9,450,'Change the security level to Standard. Does this resolve the customers issue?','Question','8.1','9.2,9.1',null,280,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (10,450,'Issue Resolved','ExitPoint','9.1',null,null,null,1,6,122,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (11,450,'Change the security level to Disabled. Is the customer able to browse the internet?','Question','9.2,8.2','11.2,11.1',null,281,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (12,450,'Change the security level to Standard. Is the customer able to browse the internet now?','Question','11.1,8.3,8.4','12.2,12.1',null,283,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (13,450,'Issue Resolved','ExitPoint','12.1',null,null,null,1,6,123,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (14,450,'Ask the customer to perform a master reset. Does this resolve their issue?','Question','12.2,11.2','14.2,14.1',null,282,null,null,null,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (15,450,'Faulty CPE','ExitPoint','14.2',null,null,null,1,6,124,null,null,null,null,null,null,null,null,null);
Insert into VW_LIVEPROCESSITEM_SIM_v6 (QUESTION_ID,PROCESS_ID,INNERTEXT,ITEMTYPE,LINKFROM,LINKTO,ASSOCIATED,CONTENT_ID,EXITPOINT1_ID,EXITPOINT2_ID,EXITPOINT3_ID,RESOLVEIDENTIFIER,LIBQUESTION_IDFK,FOLLOWONCALL,USERINPUT,ISLOCKED,PREVIOUSANSWER,VISIBLETOAGENT,RETRYATTEMPT,TAGS) values (16,450,'Issue Resolved','ExitPoint','14.1',null,null,null,1,6,123,null,null,null,null,null,null,null,null,null);
CREATE TABLE "LIVEPROCESS_EC_V"
(     "PROCESS_ID" NUMBER(10,0),
     "USER_ID" NUMBER(10,0),
     "CREATED" TIMESTAMP (6)
Insert into LIVEPROCESS_EC (PROCESS_ID,USER_ID,CREATED) values (450,7460,to_timestamp('21-APR-08 09.34.41.000000000 AM','DD-MON-RR HH.MI.SS.FF AM'));
Required O/P in XML format
<P>
<Ppid>450</Ppid>
<PI>
<PIqid>1</PIqid>
<PIpid>450</PIpid>
<PItext>CBB1015 - Router Firewall Settinngs Process</PItext>
<PItype>Title</PItype>
<PIto>2</PIto>
<PO />
</PI>
<PI>
<PIqid>2</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customers PC Firewall turned off?</PItext>
<PItype>Question</PItype>
<PIfrom>1</PIfrom>
<PIto>2.2,2.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>2</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>5</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>2</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>3</POto>
</PO>
</PI>
<PI>
<PIqid>3</PIqid>
<PIpid>450</PIpid>
<PItext>Advise the customer to turn off the PC Firewall in order to continue. Has this been done?</PItext>
<PItype>Question</PItype>
<PIfrom>2.2</PIfrom>
<PIto>3.2,3.1</PIto>
<PIc>278</PIc>
<PO>
<POoid>1</POoid>
<POqid>3</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>5</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>3</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>4</POto>
</PO>
</PI>
<PI>
<PIqid>4</PIqid>
<PIpid>450</PIpid>
<PItext>Advise the customer the PC Firewall must be switched off before this process????</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>3.2</PIfrom>
<PIe1>14</PIe1>
<PO />
</PI>
<PI>
<PIqid>5</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customer able to access the internet now?</PItext>
<PItype>Question</PItype>
<PIfrom>3.1,2.1</PIfrom>
<PIto>5.2,5.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>5</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>6</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>5</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>8</POto>
</PO>
</PI>
<PI>
<PIqid>6</PIqid>
<PIpid>450</PIpid>
<PItext>Is the customer having a problem with a specific website?</PItext>
<PItype>Question</PItype>
<PIfrom>5.1</PIfrom>
<PIto>6.2,6.1</PIto>
<PO>
<POoid>1</POoid>
<POqid>6</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>7</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>6</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>8</POto>
</PO>
</PI>
<PI>
<PIqid>7</PIqid>
<PIpid>450</PIpid>
<PItext>1536: CBB1008 - Browser Setup and Daignostics</PItext>
<PItype>SubProcess</PItype>
<PIfrom>6.1</PIfrom>
<PIas>1536-1-0</PIas>
<PO />
</PI>
<PI>
<PIqid>8</PIqid>
<PIpid>450</PIpid>
<PItext>What is the security level on the CPE Management page?</PItext>
<PItype>Question</PItype>
<PIfrom>6.2,5.2</PIfrom>
<PIto>8.4,8.3,8.2,8.1</PIto>
<PIc>279</PIc>
<PO>
<POoid>1</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Block All</POtext>
<POto>9</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Standard</POtext>
<POto>11</POto>
</PO>
<PO>
<POoid>3</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>Disabled</POtext>
<POto>12</POto>
</PO>
<PO>
<POoid>4</POoid>
<POqid>8</POqid>
<popid>450</popid>
<POtext>User Defined</POtext>
<POto>12</POto>
</PO>
</PI>
<PI>
<PIqid>9</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Standard. Does this resolve the customers issue?</PItext>
<PItype>Question</PItype>
<PIfrom>8.1</PIfrom>
<PIto>9.2,9.1</PIto>
<PIc>280</PIc>
<PO>
<POoid>1</POoid>
<POqid>9</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>10</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>9</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>11</POto>
</PO>
</PI>
<PI>
<PIqid>10</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>9.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>122</PIe3>
<PO />
</PI>
<PI>
<PIqid>11</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Disabled. Is the customer able to browse the internet?</PItext>
<PItype>Question</PItype>
<PIfrom>9.2,8.2</PIfrom>
<PIto>11.2,11.1</PIto>
<PIc>281</PIc>
<PO>
<POoid>1</POoid>
<POqid>11</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>12</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>11</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>14</POto>
</PO>
</PI>
<PI>
<PIqid>12</PIqid>
<PIpid>450</PIpid>
<PItext>Change the security level to Standard. Is the customer able to browse the internet now?</PItext>
<PItype>Question</PItype>
<PIfrom>11.1,8.3,8.4</PIfrom>
<PIto>12.2,12.1</PIto>
<PIc>283</PIc>
<PO>
<POoid>1</POoid>
<POqid>12</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>13</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>12</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>14</POto>
</PO>
</PI>
<PI>
<PIqid>13</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>12.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>123</PIe3>
<PO />
</PI>
<PI>
<PIqid>14</PIqid>
<PIpid>450</PIpid>
<PItext>Ask the customer to perform a master reset. Does this resolve their issue?</PItext>
<PItype>Question</PItype>
<PIfrom>12.2,11.2</PIfrom>
<PIto>14.2,14.1</PIto>
<PIc>282</PIc>
<PO>
<POoid>1</POoid>
<POqid>14</POqid>
<popid>450</popid>
<POtext>Yes</POtext>
<POto>16</POto>
</PO>
<PO>
<POoid>2</POoid>
<POqid>14</POqid>
<popid>450</popid>
<POtext>No</POtext>
<POto>15</POto>
</PO>
</PI>
<PI>
<PIqid>15</PIqid>
<PIpid>450</PIpid>
<PItext>Faulty CPE</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>14.2</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>124</PIe3>
<PO />
</PI>
<PI>
<PIqid>16</PIqid>
<PIpid>450</PIpid>
<PItext>Issue Resolved</PItext>
<PItype>ExitPoint</PItype>
<PIfrom>14.1</PIfrom>
<PIe1>1</PIe1>
<PIe2>6</PIe2>
<PIe3>123</PIe3>
<PO />
</PI>
</P>
Thanks in advance
Edited by: user512743 on Nov 18, 2008 4:46 AM

I had nokia n8 and now i want to transfer my contacts from nokia to my new i phone 5, i set up i tune and i cloud account but i don't know how to use do it. i have windows 7 and no outlook

i had nokia n8 and now i want to transfer my contacts from nokia to my new i phone 5, i set up i tune and i cloud account but i don't know how to use do it. i have windows 7 and no outlook

If I wiped my phone I wouldn't have the contacts on my phone to send to my self. I would need to take just the contacts from my back up. I would have to do this through iTunes and I don't see how I can just extract the contacts only from my back up. From what I can figure out it is all or nothing

How to use WMI to query to distinguish legacy and UEFI mode Windows?

How to use WMI to query to distinguish legacy and UEFI mode Windows?

This document covers requirements for UEFI support.
http://msdn.microsoft.com/en-us/windows/hardware/gg463144.aspx
One of the requirements seems to be ACPI. The Win32_BIOS class of WMI has a BIOSCharacteristics property that indicates if ACPI is supported. See this link for properties exposed by Win32_BIOS:
http://msdn.microsoft.com/en-us/library/aa394077(v=VS.85).aspx
There is a PowerShell example showing how to get this information at the bottom. You will need to study the document in the first link to see what else is required.
Richard Mueller - MVP Directory Services

How to share the same session between JNLP Application and browser session

How to share the same session between JNLP Application and browser session using BasicService.showDocument(url) method? It appears whenever i launch any URL from within a JNLP application using BasicService.showDocument(url) , it creates new instance of browser and session even after i used cooke handlers to restore JSESSIONID and Ltpa token etc.
public static int showDocument(String urlToOpen)
BasicService obj = (BasicService) ServiceManager.lookup("javax.jnlp.BasicService");
obj.showDocument(urlToOpen);
}

Try using Reflection

I want to synchronize my iPOP with my new MAC. How can i do that without lost my applications and songs???

I want to synchronize my iPOP with my new MAC. How can i do that without lost my applications and songs???

Backup you library and restore to the new computer.
iTunes: Back up your iTunes library by copying to an external hard drive
or
iTunes: How to move your music to a new computer
- After all the media is on the new computer connect the iPod to the computer and make a backup by right clicking one the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup
Note that the iPod backup that iTunes makes does not include synced media like apps and music.

How to use the same component in different applications

Hi All,
I need to use the same component in different applications. i.e In opportunity, Quotation & Promotion.
The Search help view in the component PRD01QR should be used in all these components but with different search criteria.
With help of the DO_determine_configuration, different view configurations are possible but Different search criteria is not possible.
for Eg. search parameter without DDLB, F4 options in another components.
How can I control the behavior of the search view in different applications with restricting the field properties?
Is it possible to find out where and in which component these search_help_search component is used?

Hi Harry,
Is it possible to find out where and in which component these search_help_search component is used?
ans: I am giving an Example for your question go through that u might get clear about this.
Ex: BT115IT_SLSO sales order component
below screen they component usage using for populate the product search component.
please let me know any help required .
Regards,
vishwa.

How to Use Mobile Service in HTML/JavaScript Application

The Windows Azure Mobile Service is a back end tool for mobile applications. It supports various platforms, such as Windows Store, Windows Phone 8, iOS and Android. The Windows Azure
Mobile service can also support HTML/JavaScript. This article helps you to get a basic idea of how to use the Windows Azure Mobile Service in HTML/JavaScript applications.
Let us start with a Quick startup project provided by Microsoft. A Quick startup is a simple demo project that can help us to understand how to use the Windows Azure Mobile Service with HTML/JavaScript. So let's start from the Quick startup project.
Login into in the Windows Azure portal and use the following procedure.
This article assumes you already have a Windows Azure account and the mobile service is enabled in your account.
1. Create a new Windows Azure Mobile Service
Click on the +New button from the left corner and select Compute -> Mobile Service and then click on the "Create" button.
The Windows Azure portal popup creates a mobile service wizard when you click the Create button. Windows Azure asks you to enter the mobile service name as shown in the following image:
Select the database options and region for your mobile service and click on the "Next" button.
Once your mobile service is successfully created, the portal will show all your mobile services as shown in the following images.
Ok! We have created a new mobile service successfully. Let's move to our subsequent steps.
1. Quick startup Project
As we all know, the Windows Azure Mobile Service can support many platforms such as Windows Store, Windows Phone 8, iOS, Android and HTML/JavaScript. This article only tells us about the new HTML/JavaScript platform that is recently added to the Windows Azure
Mobile Service.
In the image above, we are in the quick startup page where the Windows Azure Mobile Service allows the user to choose their platform. I have selected the HTML/JavaScript Platform.
In the image above, we found 3 quick steps that can allow us to run <g class="gr_ gr_74 gr-alert gr_gramm Grammar" data-gr-id="74" id="74">a HTML/JavaScript</g> sample project.
1. Create Table: In this step the user needs to create a table that can used by the sample project, once you hit the create TodoItem Table button. The Portal will create a TodoItem table in your mobile service. You
can check this table by clicking on the data tab(menu).
2. Download and run your app: In this step the user needs to download the Quick startup project that is provided by the Windows Azure portal. Click on the "Download" button and download the project. You will
see the following files in the quick startup project.
The Server folder contains some files to setup this project locally. The user should run the file from the server folder corresponding to their OS. I am using Windows OS so I ran the <g class="gr_ gr_80 gr-alert gr_spell ContextualSpelling ins-del multiReplace"
data-gr-id="80" id="80">lanch</g>-<g class="gr_ gr_79 gr-alert gr_spell ContextualSpelling ins-del multiReplace" data-gr-id="79" id="79">windwos</g> file to setup this project locally in
IISExpress.
Press r and enter the key, you will see IISExpress started. Do not close this Windows and open your browser and request the http://localhost:8000/ page.
Enter the Item name and click on the add button. Your Item will be added to the TodoItem table.
3. Configure your host name: This step is a very important step for any HTML/JavaScript application that uses the Windows Azure Mobile Service. In this <g class="gr_ gr_83 gr-alert gr_gramm Punctuation only-ins
replaceWithoutSep" data-gr-id="83" id="83">step</g> the user must register their website name in the Cross-origin resource sharing (CORS). By default, "localhost" is added by the Windows Azure Mobile Service
so your quick startup project can run without making any CORS setting changes. The user can add their website domain name by clicking on the configure tab (menu).
The user can add as many website domain names as needed.

are you asking a question or did you just post a tutorial here? you might want to post it as a blog post or wiki entry instead.

How to use Portal SSO with existing BSP application

Hi all,
we run SAP EP 6.0 here and have a single start BSP page of
an application integrated with the SAP appintegrator for BSP. The rest of the existing BSP application still uses
the login functionality based on CL_BSP_LOGIN_APPLICATION
and is not integrated in the portal.
Problem: If a user directly accesses one of the "old" BSP pages, he should be redirected to the portal to auth. him via SSO and afterwards the original BSP page with all its parameters should be processed.
How to deal with that? Is there a similar mechanism like with the BSP_LOGIN_APP in between for the SAP EP?
Thanks for your help!
-RAINER-

I think that doesnt solve the problem.
I have 2 systems: SAP ECC with all BSPs and the portal on another system. So I have to entry points: Via portal using the appIntegrator BSP or directly to the ECC.
As-is: If the auth. for the BSP appl. fails, the user is re-directed via the error page given in the service (SICF)
to a BSP login app. and from there to the requested page.
No portal in this concept.
Must-be: A user is still able to directly access a BSP on the SAP ECC by entering the URL in the browser. It's not a must entering via the portal first.
So when the login failed on the ECC (no SSO ticket), he should be redirected to the portal for getting his SSO.
After he signed in successfully the user will be forwarded to the BSP page he entered in the browser the first place.
I can't see a way to use the URL iView. I am thinking of simply changing the login mechanism of the BSP using the portal login functionality.
The link you gave me offers an implementation of CL_ICF_SYSTEM_LOGIN. Any ideas?
Regards,
-RAINER-

How to use singleinstance service with a JWS application

Hello,
I have a Swing application and i am using Java web start to deploy on the user machines.
I want to know how to implement the single instance service. so that only one instance os the application is running.
Where should i use the singleinstance class provided by JNLP api.
for ex:
package test;
import java.awt.BorderLayout;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.JTextArea;
import javax.swing.border.EmptyBorder;
import java.util.Date;
// classes of the web-start API, used in this example.
import javax.jnlp.SingleInstanceListener;
import javax.jnlp.SingleInstanceService;
import javax.jnlp.ServiceManager;
import javax.jnlp.UnavailableServiceException;
/** A test of the SingleInstanceService using the web-start API.
@author Andrew Thompson
@version 2007/1/8
public class SingleInstanceApplication
extends JFrame
implements SingleInstanceListener {
/** A simple editing area. */
JTextArea document;
/** Assemble the GUI. */
SingleInstanceApplication() {
super("JNLP API single instance service");
try {
SingleInstanceService singleInstanceService =
(SingleInstanceService)ServiceManager.
lookup("javax.jnlp.SingleInstanceService");
// add the listener to this application!
singleInstanceService.addSingleInstanceListener(
(SingleInstanceListener)this );
} catch(UnavailableServiceException use) {
use.printStackTrace();
System.exit(-1);
setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
document = new JTextArea(
"Try openning another version of this application\n");
document.setEditable(false);
JPanel main = new JPanel(new BorderLayout());
main.add(new JScrollPane(document));
main.setBorder( new EmptyBorder(8,8,8,8) );
getContentPane().add(main);
pack();
setSize(400,300);
setLocationRelativeTo(null);
/** Specified by the SingleInstanceListener interface
@param args The command line parameters used for this invocation */
public void newActivation(String[] args) {
StringBuffer sb = new StringBuffer();
for (int ii=0; ii<args.length; ii++) {
sb.append("'" + args[ii] + "' ");
String message = "Got new args: " + sb.toString();
// this usually serves to alert the user the app.
// wants attention. On Win. it will flash the
// apps. icon in the task bar.
JOptionPane.showMessageDialog(this, message);
// also add the new args and time to the document.
document.append( new Date() + "\t" + message + "\n" );
/** Construct the GUI and display it. If the user double clicked
a file to start the application, begin measures to load that file. */
public static void main(String[] args) {
SingleInstanceApplication app =
new SingleInstanceApplication();
app.setVisible(true);
in my progrma there are many clasess where should i use this.
Pls help new bie!!
Thanks and Regards

To work for your project, the SIS has to be implemented on the class that is the main(). To implement the SIS for a class, it needs to declare it implements the SingleInstanceListener and define the new activation method. Also, it needs to have the SingleInstanceService added to it via. the methods addSingleInstanceListener(). It is not strictly necessary to call addSingleInstanceListener() from the main() class, but it does make a lot of sense.
Does that answer your question?
Edited by: AndrewThompson64 on Dec 15, 2007 1:28 AM
Edited by: AndrewThompson64 on Dec 15, 2007 1:48 AM

How to use vpd to restrict rows by application and schema_name?

Similar Messages

Maybe you are looking for