How to use weblogic.DDconverter Tool to upgrade Deployment Descriptors.

Hi,
I want to know how to use weblogic.DDconverter Tool to upgrade Deployment Descriptors using EAR of previous verisons(JDK and weblogic).
Regards,
Neeraj

Looks like the protocol is not correct (Unable to connect to 'http://localhost:7001': Destination unreachable)
Could you try the t3 protocol, for example,
java weblogic.Deployer -adminurl t3://localhost:7001 -username weblogic -password welcome1 -listapps

Similar Messages

How to use weblogic.Deployer

I can deploy this adf application to weblogic server in jdeveloper 11.1.1.3.
How to use weblogic.Deployer in weblogic 10.3.3? I get errors as follow:
Microsoft Windows [Version 6.0.6001]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:\Users\Administrator>d:
D:\>cd D:\weblogicSA2011\wlserver_10.3\samples\domains\wl_server\bin
D:\weblogicSA2011\wlserver_10.3\samples\domains\wl_server\bin>setDomainEnv.cmd
D:\weblogicSA2011\wlserver_10.3\samples\domains\wl_server>java weblogic.Deployer
-adminurl http://localhost:7001 -user weblogic -password welcome1 -deploy -upload E:\SOAworkspace\otnapp\deploy\otnapp_application1.ear
weblogic.Deployer invoked with options: -adminurl http://localhost:7001 -user weblogic -deploy -upload E:\SOAworkspace\otnapp\deploy\otnapp_application1.ear
javax.enterprise.deploy.spi.exceptions.DeploymentManagerCreationException
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:121)
at weblogic.deploy.api.spi.factories.internal.DeploymentFactoryImpl.getDeploymentManager(DeploymentFactoryImpl.java:86)
at weblogic.deploy.api.tools.SessionHelper.getRemoteDeploymentManager(SessionHelper.java:496)
at weblogic.deploy.api.tools.deployer.Jsr88Operation.connect(Jsr88Operation.java:297)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:137
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
at weblogic.Deployer.run(Deployer.java:70)
at weblogic.Deployer.main(Deployer.java:54)
Caused by: weblogic.deploy.api.spi.exceptions.ServerConnectionException
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.init(ServerConnectionImpl.java:141)
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.getNewConnection(WebLogicDeploymentManagerImpl.java:148)
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:118)
at weblogic.deploy.api.spi.factories.internal.DeploymentFactoryImpl.getDeploymentManager(DeploymentFactoryImpl.java:86)
at weblogic.deploy.api.tools.SessionHelper.getRemoteDeploymentManager(SessionHelper.java:496)
at weblogic.deploy.api.tools.deployer.Jsr88Operation.connect(Jsr88Operation.java:297)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:138
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:116)
... 2 more
Caused by: javax.naming.CommunicationException [Root exception is java.net.Conne
ctException: http://localhost:7001: Destination unreachable; nested exception is
java.net.ProtocolException: Tunneling result unspecified - is the HTTP s
erver at host: 'localhost' and port: '7001' a WebLogic Server?; No available router to destination]
at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:787)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:366)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.Environment.createInitialContext(Environment.java:208)
at weblogic.jndi.Environment.getInitialContext(Environment.java:192)
at weblogic.jndi.Environment.getInitialContext(Environment.java:170)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getContext(ServerConnectionImpl.java:328)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getEnvironment(ServerConnectionImpl.java:300)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.init(ServerConnectionImpl.java:139)
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.getNewConnection(WebLogicDeploymentManagerImpl.java:148)
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:118)
at weblogic.deploy.api.spi.factories.internal.DeploymentFactoryImpl.getDeploymentManager(DeploymentFactoryImpl.java:86)
at weblogic.deploy.api.tools.SessionHelper.getRemoteDeploymentManager(SessionHelper.java:496)
at weblogic.deploy.api.tools.deployer.Jsr88Operation.connect(Jsr88Operation.java:297)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:137
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:115)
... 2 more
Caused by: java.net.ConnectException: http://localhost:7001: Destination unreach
able; nested exception is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP server at host: 'localhost' and port: '7001' a WebLogic Server?; No available router to destination
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
... 19 more
Caused by: java.rmi.ConnectException: Destination unreachable; nested exception
is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP server at host: 'localhost' and port: '7001' a WebLogic Server?; No available rou
ter to destination
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:254)
at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:197)
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238
at weblogic.rjvm.RJVMFinder.findOrCreateRemoteCluster(RJVMFinder.java:316)
at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:205)
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
at weblogic.jndi.WLInitialContextFactoryDelegate$1.run(WLInitialContextFactoryDelegate.java:345)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:340)
at weblogic.jndi.Environment.getContext(Environment.java:315)
at weblogic.jndi.Environment.getContext(Environment.java:285)
at weblogic.jndi.Environment.createInitialContext(Environment.java:208)
at weblogic.jndi.Environment.getInitialContext(Environment.java:192)
at weblogic.jndi.Environment.getInitialContext(Environment.java:170)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getContext(ServerConnectionImpl.java:328)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.getEnvironment(ServerConnectionImpl.java:300)
at weblogic.deploy.api.spi.deploy.internal.ServerConnectionImpl.init(ServerConnectionImpl.java:139)
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.getNewConnection(WebLogicDeploymentManagerImpl.java:150)
at weblogic.deploy.api.spi.deploy.WebLogicDeploymentManagerImpl.<init>(WebLogicDeploymentManagerImpl.java:118)
at weblogic.deploy.api.spi.factories.internal.DeploymentFactoryImpl.getDeploymentManager(DeploymentFactoryImpl.java:86)
at weblogic.deploy.api.tools.SessionHelper.getRemoteDeploymentManager(SessionHelper.java:496)
at weblogic.deploy.api.tools.deployer.Jsr88Operation.connect(Jsr88Operation.java:297)
at weblogic.deploy.api.tools.deployer.Deployer.perform(Deployer.java:138)
at weblogic.deploy.api.tools.deployer.Deployer.runBody(Deployer.java:88)
at weblogic.utils.compiler.Tool.run(Tool.java:158)
at weblogic.utils.compiler.Tool.run(Tool.java:116)
... 2 more
Unable to connect to 'http://localhost:7001': Destination unreachable; nested exception is:
java.net.ProtocolException: Tunneling result unspecified - is the HTTP server at host: 'localhost' and port: '7001' a WebLogic Server?; No available rou
ter to destination. Ensure the url represents a running admin server and that the credentials are correct. If using http protocol, tunneling must be enabled on the admin server.
D:\weblogicSA2011\wlserver_10.3\samples\domains\wl_server>

Looks like the protocol is not correct (Unable to connect to 'http://localhost:7001': Destination unreachable)
Could you try the t3 protocol, for example,
java weblogic.Deployer -adminurl t3://localhost:7001 -username weblogic -password welcome1 -listapps

Weblogic 8.1 and Eclipse using Weblogic Server Tools

I am working on a project that has been developed with Weblogic 8.1 without integration into an IDE (Eclipse, etc.) We are trying to convert the source tree to a form usable within Eclipse using Weblogic Server Tools. We want to make deployment on developer workstations quicker and easier and provide for server side debugging. There is not much documentation on how to do this that I have been able to find. I have just finished reading the details of the split directory strucuture in the Weblogic documentation and understand that Server Tools uses the split directory concept. My question is basically how we create the project in Eclipse (with Server Tools plug-ins) initially. Is anyone out there still using Weblogic 8.1 and Eclipse 3.3 (Europa) using Weblogic Server Tools that can help?

There isn't much in a way of documentation that's explicit to WebLogic Server Tools, but a lot of Workshop 10.2 documentation applies. Basically, you will want to create Dynamic Web Projects to house your code. On the first page of Dynamic Web Project wizard, you will get a chance to define and target a server (WLS 8.1 in your case). That will configure your project classpath for WLS 8.1 and get everything else squared away.
Note that there is only very basic support for 8.1. In particular, the split-directory concept is not supported, but deployment is taken care of for you behind the scenes, so the details shouldn't matter that much.

How To Use The Pen Tool in Adobe Illustrator, Photoshop and InDesign CS6 | Creative Suite Podcast: Designers | Adobe TV

In this episode of the Adobe Creative Suite Podcast Terry White shows how to use the Pen Tool to create Art, Frames and to trace images in Photoshop CS6. If you've never used the Pen Tool before, this is your video!
http://adobe.ly/STegFg

With the pen tool in Indesign, is there a way of making the points not join if you want to make a few single lines?

How to use weblogic on jdk 5?

Does anyone know, how to use weblogic and jdk 5?

Supported on version 9.0 Beta, only.
http://e-docs.bea.com/platform/suppconfigs/configs90/90_over/overview.html#1122259
Bill
"Fauzi Mubarok" <[email protected]> wrote in message
news:2966888.1105597574948.JavaMail.root@jserv5...
Does anyone know, how to use weblogic and jdk 5?

How to use the mesh tool

I am not sure how to use the mesh tool

it can be tricky! it's best to use with geometric shapes and not random figures that you create with the pen or brush tools.
so lets say you wanted to make an apple using a real picture for reference. first off, you'd place the picture of the real apple in the background. next, you would choose the circle tool to create a circle around the apple. then, you would use the mesh tool and press the center anchor to create a simple grid looking form onto the circle. grab the selection tool to move around the anchor points surrounding the apple to make a more accurate outline. after this step, it's easier to add more anchor points for the actual apple! all you must do is grab the pen tool and add more anchor points along the path and use the selection tool to move the anchor points around the apple; eventually it'll look somewhat like a 3D graph of an apple. important tip to remember, the less lines the better. but a few are okay.
so after you've graphed/mapped out your apple you're going to want to press the selection tool and use your eyedropper tool to get an accurate color of the spot/anchor you selected. the basic point of the mesh tool is to outline a picture,@ and with the eyedropper tool you can use the exact colors from the original picture you're working from. i learned this technique from class. here's my example it can be a really useful tool if it's what you're looking for.

Problem using WebLogic Scripting Tool

Hi,
I'm new to weblogic. I tried to deploy WAR file to weblogic(installed on my PC) using WLST. I got the following error message.
Problem invoking WLST - Traceback (innermost last):
[exec] File "C:\TutorialHome\CDB\buildfiles\localhost.py", line 7, in ?
[exec] File "<iostream>", line 354, in activate
[exec] WLSTException: 'Error occured while performing activate : Error while Activating changes. Use dumpStack() to view the full stacktrace'
[exec] <Apr 21, 2009 1:24:43 PM EDT> <Warning> *<JNDI> <BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>*
Here is my hostlocal.py:
connect('weblogic','weblogic','t3://localhost:7001')
stopApplication('cdb')
edit()
startEdit()
progress=redeploy('cdb')
save()
activate()
startApplication('cdb')
disconnect()
exit()
So How can I solve the problem of "<BEA-050001> <WLContext.close() was called in a different thread than the one in which it was created.>"?
Thanks in advance.
Sarah

Check the blend modes for the brush tool in the tool options bar.
Also if your painting on a blank layer check the blend modes in the layers panel.
Either way try the Normal mode.
MTSTUNER

How to use the design tools in pages 5.2 on Macbook Pro

How do you use the alignment tools for placing and inserting images in pages 5.2?

Hi Ivy Janelle,
Thanks for visiting Apple Support Communities.
In Pages 5, you can insert images using the Media browser at the top of the document window. Once you insert them, you can edit and arrange images using the Format inspector--the paintbrush icon in the top right. You can find detailed information about inserting and using images at these links:
Pages for Mac 5.0: Add and edit images
http://support.apple.com/kb/PH15345
Pages for Mac 5.0: Align and position objects
http://support.apple.com/kb/PH15351
Best Regards,
Jeremy

How to use Weblogic Server 6.1 build.xml with ant

Hi Java's
I have downloaded the latest version of BEA Weblogic server 6.1,they have changed the build.cmd to build.xml for compiling and building the ejb applications.they are telling that we have use $ant to run the build.xml but i couldn't able to do that.i'm getting "command not found error"..i'm using winnt.please help me how to use $ ant.Is it a seperate exe or batch file that i have to download ?if so where to download it.how to use it.please help.
Regards
Balaji

To use it after installation, set your path to your
<ant_installation_dir>\bin, then navigate to the diectory containing the build.xml. then follow the instructions in the weblogic documentation for running ant.

How To Use CS5 Perspective Tool

Does anyone know how to place jpgs using the perspective tool without converting it to a vector? The file is too large for the web. Any tips?

I can only find one way and it is a little funky.
1. select the plane you want the picture to be on
2. then create or drag a shape to it, it can be any closed path.
3. with the shape selected go to the Draw Inside command near the bottom of the Tool Panel and select it.
4. while the Draw Inside Object is selected go to File>Place and select your image and click OK
5. You will probably have to reposition the image and perhaps resize it as well.
this is how it works and you can see from my watermark that the image in perspective
you have use the direct select or selection tool to reposition and resize the image a little tricky but work able.
this will be a feature request to make such a container for images to be used on the perspective grid.

MAP Toolkit - How to use this MAP tool kit for all SQL Server inventory in new work enviornment

Hi Every one
Just joined to new job and planning to do Inventory for whole environment so I can get list of all SQL Server installed . I downloaded MAP tool kit just now. So looking for step by step information to use this for SQL Inventory. If anyone have documentation
or screen shot and can share would be great.
Also like to run It will be good to run this tool anytime or should run in night time when is less activity?
Hoe long generally takes for medium size environment where server count is about 30 ( Dev/Staging/Prod)
Also any scripts that will give detailed information would be great too..
Thank you
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah

Hi Logicinisde,
According to your description, since the issue regards Microsoft Assessment and Planning Solution Accelerator. I suggestion you post the question in the Solution Accelerators forums at
http://social.technet.microsoft.com/Forums/en-US/map/threads/ . It is appropriate and more experts will assist you.
The Microsoft Assessment and Planning (MAP) Toolkit is an agentless inventory, assessment, and reporting tool that can securely assess IT environments for various platform migrations. You can use MAP as part of a comprehensive process for planning and migrating
legacy database to SQL Server instances.
There is more information about how to use MAP Tool–Microsoft Assessment and Planning toolkit, you can review the following articles.
http://blogs.technet.com/b/meamcs/archive/2012/09/24/how-to-use-map-tool-microsoft-assessment-and-planning-toolkit.aspx
Microsoft Assessment and Planning Toolkit - Technical FAQ:
http://ochoco.blogspot.in/2009/02/microsoft-assessment-and-planning.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How to use weblogic.jspc -J option

Can anyone give me an example on how to use the
          weblogic.jspc -J option? Specifically, I want
          my "-compilerclass" to use a system property
          which will be specified on the command line.
          For example:
          java ... weblogic.jspc ... -compilerclass MyCompilerClass -Dmy.text="hello world"
          or something to that effect.
          Gary F.
          Fast Track Systems, Inc.


-J only seems to work for -X-style arguments to the VM, i.e. you can say
          "-Jms64m".
          -compiler has been broken for a while (see my other post in this group on
          that).
          anders
          "Gary Fong" <[email protected]> wrote in message
          news:[email protected]..
          > Can anyone give me an example on how to use the
          > weblogic.jspc -J option? Specifically, I want
          > my "-compilerclass" to use a system property
          > which will be specified on the command line.
          >
          > For example:
          >
          > java ... weblogic.jspc ... -compilerclass
          MyCompilerClass -Dmy.text="hello world"
          >
          > or something to that effect.
          > --
          > Gary F.
          > Fast Track Systems, Inc.

How to use weblogic.logging classes in 6.0

Hi,
We developed a number of logging classes under 5.1. One used
weblogic.logging.LogOutputStream to write messages out to the log. This
code no longer works under WLS 6.0. Everything compiles and runs but I
don't see any of our messages in any of the log files. Judging from the 6.0
JavaDoc, it looks like LogOutputStream is no longer supported. So I
switched over to using NonCatalogLogger. Same results - no output in the
logs.
What am I missing?
Thanks.
-brian

My coding error. weblogic.logging.* classes work just fine in 6.0 (he said
sheepishly)!
-b
"Brian J. Levine" <[email protected]> wrote in message
news:[email protected]..
Hi,
We developed a number of logging classes under 5.1. One used
weblogic.logging.LogOutputStream to write messages out to the log. This
code no longer works under WLS 6.0. Everything compiles and runs but I
don't see any of our messages in any of the log files. Judging from the6.0
JavaDoc, it looks like LogOutputStream is no longer supported. So I
switched over to using NonCatalogLogger. Same results - no output in the
logs.
What am I missing?
Thanks.
-brian

How to use weblogic.Admin to set JMS ErrorDestination property on WLS 7?

This thread is talking about using weblogic.Admin to set the ErrorDestination property.
          http://forums.bea.com/bea/thread.jspa?threadID=200036378&messageID=202187327&start=0
          We run the script against the WLS 7.0 server, script get 'OK' result but it didn't work (property wasn't set). Some error is reported in the admin.log on the server.
          We also run the scipt against the WLS 8 server. It worked perfectly.
          Does anyone know whether this works at all on WLS 7?

The reason we are using weblogic.Admin is that we are using conf2admin to generate the scripts. weblogic.Admin seems to be the only option for WLS7. Thanks for your suggestion and will definitely check out WLST.
          The full error message is:
          ####<Aug 27, 2004 8:55:20 AM NZST> <Emergency> <Management> <rbd1> <admin> <ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <> <141067> <The value n204162:JMSServer=LAS2JMSServer,Name=FailedQueue,Type=JMSQueue specified for the ErrorDestination attribute is not valid. MBean: n204162:JMSServer=LAS2JMSServer,Name=FundingQueue,Type=JMSQueue. Method: setAttributes. Exception: javax.management.InvalidAttributeValueException: BeanShell Interpreter threw exception while evaluating (((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value)))) on value n204162:JMSServer=LAS2JMSServer,Name=FailedQueue,Type=JMSQueue, getLegalCheck() for attribute ErrorDestination of MBean "n204162:JMSServer=LAS2JMSServer,Name=FundingQueue,Type=JMSQueue", Sourced file: <Inline eval of: ((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value))); > : Method Invocation weblogic.management.configuration.JMSLegalHelper.legalErrorDestination : at Line: 1 : in file: <Inline eval of: ((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value))); > : weblogic .management .configuration .JMSLegalHelper .legalErrorDestination ( self , value )
          Target exception: java.lang.NullPointerException
          .>
          javax.management.InvalidAttributeValueException: BeanShell Interpreter threw exception while evaluating (((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value)))) on value n204162:JMSServer=LAS2JMSServer,Name=FailedQueue,Type=JMSQueue, getLegalCheck() for attribute ErrorDestination of MBean "n204162:JMSServer=LAS2JMSServer,Name=FundingQueue,Type=JMSQueue", Sourced file: <Inline eval of: ((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value))); > : Method Invocation weblogic.management.configuration.JMSLegalHelper.legalErrorDestination : at Line: 1 : in file: <Inline eval of: ((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value))); > : weblogic .management .configuration .JMSLegalHelper .legalErrorDestination ( self , value )
          Target exception: java.lang.NullPointerException
               at weblogic.management.internal.DynamicMBeanImpl.checkAttributeValueIsLegal(DynamicMBeanImpl.java:1517)
               at weblogic.management.internal.DynamicMBeanImpl.prepareForModification(DynamicMBeanImpl.java:1440)
               at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:1004)
               at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:353)
               at weblogic.management.internal.DynamicMBeanImpl.setAttributes(DynamicMBeanImpl.java:827)
               at com.sun.management.jmx.MBeanServerImpl.setAttributes(MBeanServerImpl.java:1475)
               at weblogic.management.internal.RemoteMBeanServerImpl.setAttributes(RemoteMBeanServerImpl.java:905)
               at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown Source)
               at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
               at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
               at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:785)
               at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:308)
               at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)

Who know how to use dynamic config tools for voice ip

Hi,
I want to search a 37XX/voice gateway, 2FE , 8 E&M
I use top to down shedule one by one
but can't get the output and no E&M card to choice
got message again and again
Error!
Please choose the following option before configuring any of its suboptions:
1. In the left frame, click on 3725 Configurable Network Module Option Class
2. In the right frame, select the NM-1FE2W-V2 option
3. Now navigate back to Option class for all wics to view the list of available options.
What happen here
Thanks very much

You can try using Software Advisor tool which will help for selcting the cards and IOS

How to use weblogic.DDconverter Tool to upgrade Deployment Descriptors.

Similar Messages

Maybe you are looking for