Weblogic 8.1 and Eclipse using Weblogic Server Tools

I am working on a project that has been developed with Weblogic 8.1 without integration into an IDE (Eclipse, etc.) We are trying to convert the source tree to a form usable within Eclipse using Weblogic Server Tools. We want to make deployment on developer workstations quicker and easier and provide for server side debugging. There is not much documentation on how to do this that I have been able to find. I have just finished reading the details of the split directory strucuture in the Weblogic documentation and understand that Server Tools uses the split directory concept. My question is basically how we create the project in Eclipse (with Server Tools plug-ins) initially. Is anyone out there still using Weblogic 8.1 and Eclipse 3.3 (Europa) using Weblogic Server Tools that can help?

There isn't much in a way of documentation that's explicit to WebLogic Server Tools, but a lot of Workshop 10.2 documentation applies. Basically, you will want to create Dynamic Web Projects to house your code. On the first page of Dynamic Web Project wizard, you will get a chance to define and target a server (WLS 8.1 in your case). That will configure your project classpath for WLS 8.1 and get everything else squared away.
Note that there is only very basic support for 8.1. In particular, the split-directory concept is not supported, but deployment is taken care of for you behind the scenes, so the details shouldn't matter that much.

Similar Messages

What is the interaction between calling VIs and subVIs using VI Server?

I'm studying for the CLAD and one of the lines in NI's preparation document here is this:
What is the interaction between calling VIs and subVIs using VI Server?
I know how to use the "Call By Reference" function to call a VI, but not necessarily a subVI. I thought a subVI is always loaded with the calling VI and has nothing to do with VI Server. What am I missing?
Solved!
Go to Solution.

Hi Bmihura,
I think this article will clear up how the VI Server works with subVIs called dynamically or statically.
Calling a VI by Reference
Best Regards,

How do I turn off the alt scroll zoom? When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

How do I turn off the alt scroll zoom?
When I'm in Adobe photoshop and illustrator using the pen tool, alt is utilized for another short cut. I would like to use the alt command for the pen tool instead of zooming into the screen.

I tend to select things from left to right and every time I am moving in a downward right diagonal motion during lasso selection I am missing a clear view and I am tending to have a more sloppy selection. All this does is slow me down since I need to go back and hit those areas again. The big arrowhead just get's in the way. The original lasso tool with the thin line and small active point at it's lower left was far better for me.
I don't like turning the cursors to precise because I like to see the active tool icon where my cursor is and as the icon changes as I hold modifier keys down. If I am forced to get comfortable with using pricise cursors I guess I will, but man, I've never had to do this in my 15 years of photoshop use...
I would absolutely LOVE to find a way to get the old lasso icon -- without the arrowhead above it.
Is there any chance this option could be inlcuded in cursor preferences? I'd give much thanks, Adobe.

Weblogic 5.1 and iPlanet as proxy server

Hello!
We are using Weblogic 5.1 and Netscape's iPlanet as a proxy server. Both
the machines are running of seperate NT boxes with static IP addresses.
All the changes which need to made on iPlanet side (i.e. copying
proxy36.dll, modificatiopn of mime types file, changes to the obj.conf
file etc.) have been made. Howver I am still not able to get the JSP
forwarded to Weblogic to get them serviced.
I had this evironment set up pretty quickly when using Weblogic 4.5.1.
Any ideas? Anything I might have overlooked. I have pretty much follwed
all the instructions specified by Weblogic to set up Netscape as a proxy
server.
ANy help in resolving this problem would be greatly appreciated.
Thanks.
Vijay R

I have the same setup but it's on one NT box and works OK. Make sure you have the proxy36.dll from Weblogic 5.1 Service Pack 6. Release notes say you MUST have SP6 proxy file to work with iPlanet 4.1
Sam Fowler
Vijay Raghavacharian <[email protected]> wrote:
Hello!
We are using Weblogic 5.1 and Netscape's iPlanet as a proxy server. Both
the machines are running of seperate NT boxes with static IP addresses.
All the changes which need to made on iPlanet side (i.e. copying
proxy36.dll, modificatiopn of mime types file, changes to the obj.conf
file etc.) have been made. Howver I am still not able to get the JSP
forwarded to Weblogic to get them serviced.
When I try to execute a JSP, I get the "Internal Server Error". On
analyzing the
error message sin the log files for iPlanet it reports that it is not
able to connect to
Weblogic.
In order to fix this porblem I just copies the proxy36.dll for Weblogic
version
4.5.1 and copied it in the required iPlanet directory. This seems to
have fixed
the problem of getting the JSP serviced by Weblogic, but I am wary about
the solution.
Am I doing something wrong or is there a new files availabel for
download. I checked
the website for BEA and did not find any answers.
I had this evironment set up pretty quickly when using Weblogic 4.5.1.
Any ideas? Anything I might have overlooked. I have pretty much follwed
all the instructions specified by Weblogic to set up Netscape as a proxy
server.
Any help in resolving this problem would be greatly appreciated.
Thanks.
Vijay R

How to run jsp and servlet using JBOSS server

Dear Friend,
I have JBoss application server and Eclipse id
now i want to run JSP and Servlet but i am not getting the place where to place my servlet class file to run it .
before that i run jsp and servlet using tomcat5.0 but in that i place my servlet class in WEB-INF/classes folder and do corresponding entry in web.xml file and run it through browser.
now i want to use JBOSS how it is possible
PLZ Help me

Is the servlet class defined in a package.? If servlet class package is servlets., copy the servlet to
WEB-INF/classes/servlets directory.

Anyone able to run SOAP over SSL with Weblogic 5.1 and without purchasing third party tools??? If so, how???

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

Anyone able to run SOAP over SSL with Weblogic 5.1??? If so, how??? And
without purchasing third party tools??? Thanks.
-Freddie

Adjusting Text Height and Width using the Move Tool...

I have yet another question about using Type in PSE 5.0. I know you can adjust a particular types size by using the font drop down menu and clicking on any of the listed sizes or you can type in a custom size as well.
Is it though, ok to expand the Type/Text by selecting it with the Move tool and then enlarging it by using the selection handles located on the Box surrounding the text? I know you can do this, but I am wondering if you run the risk of creating a jagged look or pixalizing the text this way. The text is still vector based at this point, so I am thinking that it shouldn't be a problem, but wanted to know if it could look pixaly upon printing. I have found that I can sometimes get the text to look more the way I want using this method rather than just relying on changing the font size.
Thanks,
Lee

I believe you can achieve this by using the Move Tool, clicking on any one of the resizing handles surrounding the Box which the Move Tool creates when you select an object using it, and then just drag the resizing handles to expand your text to your liking.
If you press on a corner handle and press the shift-key at the same time while you drag, you should maintain the aspect ratio of your text.
But that's what my original question is above. By expanding or contracting the text in this way, are you running the risk of things looking jagged and/or pixaly. Is it okay to expand/contract text using the Move Tool or you should you only adjust by setting the Font size.
Lee

Can't get JSP debugging to work with WebLogic 6.0 and Eclipse 2.1.1

Is native JSP debugging supported in WebLogic 6.0? If so, what are
          the steps involved in getting it to work? I'm in debug mode and my
          servlets will catch at my breakpoints but the JSP pages' breakpoints
          are ignored. I am using compliance level 1.3 and a JRE 1.3. I tried
          to start WebLogic with the 1.4.2 JRE but I get an exception error on
          the WLS JDK name" field. What am I missing here?
          Thanks!


I appear to have solved it, but it is not clear to me why.
I created a jar file of the required classes, and placed it in the same directory as the jsp file. My jsp code then looked like:
<jsp:plugin type="applet" code="nz.astarte.ganttapplet.GanttApplet"
codebase="."
archive="GanttApplet.jar"
jreversion="1.3.1"
width="400" height="175">
<jsp:fallback>
Plugin support could not be determined
</jsp:fallback>
</jsp:plugin>
This works fine. However I would expect to be able to move the jar file to some other directory, so that the jar file and jsp files are separated. I spent hours trying to work out why it wouldn't work when I had the jar
file in WEB-INF/classes (under the jsp file directory) and had codebase="WEB-INF/classes/". In the end I put the jar file into a directory I defined separately called wotnot and defined codebase="wotnot/"
Now it works. However I still think I should be able to have the jar file anywhere, including WEB-INF/classes and would love for someone to tell me why not!
Thanks, Andrew

How to run the form that is only installed on a PC and not using a server?

Hi
I am new to Oracle and have taken the forms class. But I do not understand how to run the form from my PC using XP windows. (Do not have access to a server).
I have started the OC4J, made sure the listener was started, compiled the form and then when I run it, it automatically goes to the HTTP:
ERROR: res://ieframe.dll/acr_depnx_error.htm#,http://kevin:8889/forms/frmservle
I connected to the database correctly. I can process a report and it does nor try to access the internet. My only issue is running the form. I verified it compiled.
Sorry for a basic question. Could someone please help, I tried reviewing other questions, but not sure if they are connecting to a server or not.
I see webutil but is it required if I don't have a server? Thank you in advance.

Regardless of the version, it appears that you may not have configured the Builder. Do the following:
1. Open the Builder
2. From the menu, select Edit > Preferences > Runtime
3. In the box labeled "Application Server URL:", enter a local URL needed to run a form OR click the button labeled "Reset to Default". If you decide to manually enter a value, it would looks something like this:
http://localhost:8889/forms/frmservlet
4. In the field labeled "Web Browser Location:", enter the path and executable to your preferred browser. So for example if IE is your browser of choice the entry would most likely look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
5. Click on OK and retest.
By the way, you can manually enter a URL in the browser. Clicking the RunForm button from the Builder is strictly optional. To run the "test" form directly from the browser enter the following into the browser's address field:
http://localhost:8889/forms/frmservlet?form=test
More information about Forms can be found on OTN:
http://www.oracle.com/technology/products/forms/index.html

Test Connection failed in Crystal Reports for Eclipse using SQL Server 2008

I installed an SQL Server Express 2008 on my local PC (Window XP SP3). I downloaded sqljdbc4.jar to Crystal Reports for Eclipse
IDE library path and tried to Test Connection, but got the Ping failed message : The TCP/IP connection to the host localhost, port 1433 has failed. It said that check that an instance of SQL Server is running on the host (I saw SQL Server SQLEXPRESS is Running on my PC) and accepting TCP/IP connection at the port (I enabled TCP/IPin my PC's SQL Server Network Configuration),
and that no firewall is blocking TCP connection to the port(I turned OFF Window Firewall on my OC). Can anyone tell me how can I fix this problem ?

Hi,
Check the below thread also:
http://scn.sap.com/thread/1634856
Thanks,
DJ

Problem in using Weblogic 5.1

hello friends,
I have a Problem in Using Weblogic 5.1
I am using weblogic 5.1 Enterprise on Linux 2.2.16 SuSE (7.0) with
Dual Celeron 550MHz and 1GB RAM. The server runs our web application
which uses the servelt, JSP and XSQL technology. The problem is
that often i receive ASSERTION FAILURES where after the jsp's stop
displaying content. Is this a Weblogic administration problem or
the underlying OS problem. Kindly advice.
Thankx in Advance
Yajneesh sabharwal

Is this an issue with the "T-engine" or the "J-engine"? Are you using a
ubbconfig file or weblogic.properties file? Can you post the stack trace?
This may be an known issue and simply require you to install the latest
service pack for WLS 5.1 (aka. J-engine)...
Mary Ann Slavin wrote:
Accordning to the Software Product Information (SPI) for WLE 5.1 it is
available on the following Linux versions so this could be a problem
with the version you are running.
"BEA WebLogic Enterprise 5.1 software for Red Hat Linux 6.2 and Reliant
Unix 5.45 is available separately. "
MAS
yajneesh Sabharwal wrote:
hello friends,
I have a Problem in Using Weblogic 5.1
I am using weblogic 5.1 Enterprise on Linux 2.2.16 SuSE (7.0) with
Dual Celeron 550MHz and 1GB RAM. The server runs our web application
which uses the servelt, JSP and XSQL technology. The problem is
that often i receive ASSERTION FAILURES where after the jsp's stop
displaying content. Is this a Weblogic administration problem or
the underlying OS problem. Kindly advice.
Thankx in Advance
Yajneesh sabharwal

OraclePersistManager.updateBlobs() errors in using WebLogic DataSource

CONFIGURATION
Ap server: WebLogic 8.1
Oracle database: 10g
Oracle JDBC Driver: ojdbc14.jar, ojdbc14_g.jar, classes12.jar
DESCRIPTION
We have developed an application- V3- on top of ADF, and currently, we wanna deployed V3 from OC4J to WebLogic, and we used weblogic data source to access oracle database. The following Exception occurred in deployment to Weblogic.
java.lang.ClassCastException: weblogic.jdbc.wrapper.Blob_oracle_sql_BLOB
     at oracle.jbo.pcoll.OraclePersistManager.updateBlobs(JI[Loracle.jbo.pcoll.PCollKeyInfo;[BILoracle.jdbc.OracleCallableStatement;)V(OraclePersistManager.java:1682)
     at oracle.jbo.pcoll.OraclePersistManager.insert(JJI[Loracle.jbo.pcoll.PCollKeyInfo;[B)V(OraclePersistManager.java:1832)
     at oracle.jbo.pcoll.PCollNode.passivateElem(Loracle.jbo.pcoll.PCollPersistable;Loracle.jbo.pcoll.PCollNode;Loracle.jbo.pcoll.PCollection;J)Z(PCollNode.java:561)
     at oracle.jbo.pcoll.PCollNode.passivate()Z(PCollNode.java:684)
     at oracle.jbo.pcoll.PCollNode.passivateBranch()Z(PCollNode.java:643)
     at oracle.jbo.pcoll.PCollection.passivate()J(PCollection.java:461)
     at oracle.jbo.server.DBSerializer.passivateRootAM(I[BI)I(DBSerializer.java:294)
     at oracle.jbo.server.DBSerializer.passivateRootAM([B)I(DBSerializer.java:267)
     at oracle.jbo.server.ApplicationModuleImpl.passivateStateInternal(I[BI)I(ApplicationModuleImpl.java:5123)
     at oracle.jbo.server.ApplicationModuleImpl.passivateState(I[BI)I(ApplicationModuleImpl.java:5011)
     at oracle.jbo.server.ApplicationModuleImpl.doPoolMessage(Loracle.jbo.ApplicationPoolSvcMsgContext;)Loracle.jbo.ApplicationPoolSvcMsgContext;(ApplicationModuleImpl.java:7741)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.sendPoolMessage(Loracle.jbo.ApplicationPoolSvcMsgContext;Loracle.jbo.common.ampool.SessionCookie;Loracle.jbo.common.ampool.ApplicationPoolImpl$SessionCookieInfo;Loracle.jbo.ApplicationModule;Loracle.jbo.common.ampool.ApplicationPoolImpl$ApplicationModuleInfo;)V(ApplicationPoolImpl.java:3923)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.doManagedCheckin(Loracle.jbo.common.ampool.SessionCookie;Z)V(ApplicationPoolImpl.java:2161)
     at oracle.jbo.common.ampool.ApplicationPoolImpl.releaseApplicationModule(Loracle.jbo.common.ampool.SessionCookie;I)V(ApplicationPoolImpl.java:1261)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(IJ)V(SessionCookieImpl.java:717)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(ZZJ)V(SessionCookieImpl.java:629)
     at oracle.jbo.common.ampool.SessionCookieImpl.releaseApplicationModule(ZZ)V(SessionCookieImpl.java:611)
     at oracle.cabo.data.jbo.servlet.RootAppModuleRegistryImpl$ReleaseRootAppModule.unbindValue()V(Unknown Source)
     at oracle.cabo.share.util.BindableNamespaceMap.unbindAll()V(Unknown Source)
     at oracle.cabo.servlet.BaseBajaContext.dispose()V(Unknown Source)
     at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Loracle.cabo.servlet.BajaContext;)Loracle.cabo.servlet.Page;(Unknown Source)
     at oracle.cabo.servlet.UIXServlet.doGet(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(Unknown Source)
     at javax.servlet.http.HttpServlet.service(Ljavax.servlet.http.HttpServletRequest;Ljavax.servlet.http.HttpServletResponse;)V(HttpServlet.java:740)
     at javax.servlet.http.HttpServlet.service(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(HttpServlet.java:853)
     at weblogic.servlet.internal.ServletStubImpl$ServletInvocationAction.run()Ljava.lang.Object;(ServletStubImpl.java:996)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;Lweblogic.servlet.internal.FilterChainImpl;)V(ServletStubImpl.java:419)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(Ljavax.servlet.ServletRequest;Ljavax.servlet.ServletResponse;)V(ServletStubImpl.java:315)
     at weblogc.servlet.internal.WebAppServletContext$ServletInvocationAction.run()Ljava.lang.Object;(WebAppServletContext.java:6452)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(Lweblogic.security.subject.AbstractSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Obect;(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Lweblogic.security.acl.internal.AuthenticatedSubject;Lweblogic.security.acl.internal.AuthenticatedSubject;Ljava.security.PrivilegedAction;)Ljava.lang.Object;(SecurityManager.java:118)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(Lweblogic.servlet.internal.ServletRequestImpl;Lweblogic.servlet.internal.ServletResponseImpl;)V(WebAppServletContext.java:3661)
     at weblogic.servlet.internal.ServletRequestImpl.execute(Lweblogic.kernel.ExecuteThread;)V(ServletRequestImpl.java:2630)
After decompiling class file of OraclePersistManager, it is because the following statement, which wanted to Cast returned object to Oracle.sql.BLOB.
BLOB blob = (BLOB)oraclecallablestatement.getObject(j++);
After searching the internet, the following url says it should be casted to weblogic.jdbc.vendor.oracle.OracleThinBlob.
http://e-docs.bea.com/wls/docs81/jdbc/thirdparty.html#1043777
oracle.jbo.pcoll.OraclePersistManager is the foundation class in ADF, of which code can NOT be revised. So, what should we do to resolve such error?? Please help to get it resolved ASAP, Thx for ur time...
cheers
Adam

Hi. The problem is that in several places in Oracle JDBC extensions,
they have methods that claim they take generic JDBC objects, such
as java.sql.Blob, but they actually assume that the object is an
Oracle driver object, and do such casts internally. WebLogic always
generates a wrapper around JDBC objects so we can control transactions
and prevent unintended multithreaded use of pooled connections.
In this case, the only quick solution is to judiciously use our
getVendorConnection() call and generate/obtain the actual Oracle
blob object to pass to the OraclePersistenceManager. Do note though
that this will initially mean that the pool connection will be closed and
replaced at the end of the current invoke, to protect the pool. This is
reconfigurable, but please read our docs.
Joe Weinstein at BEA Systems

Error while attempting to use WebLogic with EDS

Hello,Previously, I have installed EDS and used the default TomCat (which I would prefer was not automatically installed).Now I want to stop using TomCat and start using WebLogic 8.x . I've gone through the docuemented steps to create the application in WebLogic, but when I attempt to access the URL for WebLogic, I recieve the following Java error:javax.servlet.ServletException: Cannot initialize essbase deployment server framework. at com.essbase.server.plugins.http.EssbaseEnterprise.init(Unknown Source)I realize this is a generic error, but is there any documentation on this?

I encountered the similar error before.I replaced Tomcat with WebSphere and DB2 with MySql.After I installed the EDS according to the EDS install guide file and started it,there were a lot of error happened.I don't know whether the cause of your error is same as mine.But I can tell you that there are some errors and missings in the EDS install guide pdf file.You should get help from the WebLogic expert if you really don't familiar with WebLogic

Legal to use Weblogic libraries in CI environment?

Hello,
In my company we are using fully licensed copies of Weblogic server (9.2 and 10.1) in test and production environments, as well as free download versions in developer workstations under Free Developer License. The applications we develop make use of Weblogic libraries and tools such as appc at compiletime.
We're now attempting to migrate the build process of our applications to a separate Continuous Integration server (i.e. not necessarily the developer's sole workstation) , which does not run the Weblogic server, but the applications it would build require the Weblogic libraries and tools at compiletime.
Herein the question: are we legally allowed to install the Weblogic server on a separate CI server for the sole purpose of satisfying compiletime dependencies and/or using the enclosed tools in order to build our applications, if we never actually run the server application?
Thanks!

Hello,
In my company we are using fully licensed copies of Weblogic server (9.2 and 10.1) in test and production environments, as well as free download versions in developer workstations under Free Developer License. The applications we develop make use of Weblogic libraries and tools such as appc at compiletime.
We're now attempting to migrate the build process of our applications to a separate Continuous Integration server (i.e. not necessarily the developer's sole workstation) , which does not run the Weblogic server, but the applications it would build require the Weblogic libraries and tools at compiletime.
Herein the question: are we legally allowed to install the Weblogic server on a separate CI server for the sole purpose of satisfying compiletime dependencies and/or using the enclosed tools in order to build our applications, if we never actually run the server application?
Thanks!

Problem While using Applet Reqd classes using Weblogic 5.1

Hi All,
Here is my problem while using other classes from the Applet gives an error:NoClassDefFound,
I have also put the applet reqd. classes in a jar file and placed this jar along with the applet
in weblogic/myserver/serverclases,
my tag in the html file is as follows:
<applet code="MyApplet.class" archive="voucher.jar"
codebase="/classes/" >
</applet>
is there any problem with my tag or directory structure,
It would be great ful and thanks for helping in solving this problem.
sai.

Is this an issue with the "T-engine" or the "J-engine"? Are you using a
ubbconfig file or weblogic.properties file? Can you post the stack trace?
This may be an known issue and simply require you to install the latest
service pack for WLS 5.1 (aka. J-engine)...
Mary Ann Slavin wrote:
Accordning to the Software Product Information (SPI) for WLE 5.1 it is
available on the following Linux versions so this could be a problem
with the version you are running.
"BEA WebLogic Enterprise 5.1 software for Red Hat Linux 6.2 and Reliant
Unix 5.45 is available separately. "
MAS
yajneesh Sabharwal wrote:
hello friends,
I have a Problem in Using Weblogic 5.1
I am using weblogic 5.1 Enterprise on Linux 2.2.16 SuSE (7.0) with
Dual Celeron 550MHz and 1GB RAM. The server runs our web application
which uses the servelt, JSP and XSQL technology. The problem is
that often i receive ASSERTION FAILURES where after the jsp's stop
displaying content. Is this a Weblogic administration problem or
the underlying OS problem. Kindly advice.
Thankx in Advance
Yajneesh sabharwal

Weblogic 8.1 and Eclipse using Weblogic Server Tools

Similar Messages

Maybe you are looking for