How to use wlappc on a build machine where weblogic server is not installed

All,
We have a build environment where Weblogic server is not installed. We are currently moving from WL8 to WL10 but because of the relative paths in the weblogic.jar for version 10 I cannot figure out what jars I need in order to use the compile utilities without actually having to have the entire WL10 Application server installed on my build machine.
In WL8 we just needed the Weblogic.jar, webservices.jar, and wlManagement.jar.
Now it seems we need wlfullclient.jar webservices.jar and the weblogic.jar and all the jars in the relative classpath for the weblogic.jar, which is a very long list.
Is this really so? Seems shortsighted on Bea's/Oracle's part if we now need to have a full installation of the application server just to use the compile utilities on our build machine.
Any help on what jars to include so as to use wlappc or wlcompile on a build machine where weblogic 10 server is not installed would be appreciated.
Todd Flora

I no longer need help with this, as I have determined to load weblogic on our build machine.

Similar Messages

How to use tools to monitor databae if the production server is not direct

accessed? We access our prod server through jump server.
On my workstation, I have plsql developer intalled, and wonder how I can use my tool to connect to the prod server?
Is it posible?

846422 wrote:
No, I support internal client. I used to support external client in other company, as long as I log into vpn, and oracle client tnsnames included those sid, I should be able to log in.
The jump server is not citrix, it is another unix server with ssh ability. I guess it is firewall issue.
How to get around with it? change firewall rule
>
It seems I have to do all command line scripts from now on.yes & enjoy!

How to use JavaBean in Form Builder 6i

Hi,
How to use JavaBean in Form Builder 6i (Oracle Developer 6i)?.
i'am using Oracle Sever 8.0.4 and Oracle Developer 6i.
Please give your valuable suggestion
Regards
Seema

I would suggest you start with the sample Java bean code we have
on otn.
http://otn.oracle.com/products/forms
go to the sample code section.

How to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

how to use ni-6008 and build a four channel data acquisition at a rate of 250 samples per channel and display all the data in a waveform chart

Hi kdm,
please stick in one thread for the same topic!
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

How Can I deactivate CS3 in a machine where the Deactivate menu option is disabled all of the time?

We have a CS3 license. We lost the cd with the serial number. We want to deactivate the software in an old machine where it was registered to install it in a new machine, but the Deactivate menu option is disabled all of the time. How can we deactivate the software?

Use Web chat. Link at the bottom of this page:
Adobe ID, sign in, and account help

How do I download an app from the Mac App Store but not install it yet?

How do I download an app from the Mac App Store but not install it yet?
Can I simply download it and not install?
What if the App gets updated before I download it?
Why? Well, I am very busy and wish to install at my leisure even though I have purchased the App (required at a specific day in the month in order to appear on my business accounts).
Thanks.

There is a difference in what Kappy stated and what you stated. A major paid upgrade (v2.x to v3.0), yes, costs money, as it would in any other delivery stream. Updates (v3.0 to v3.1) to a a major version are free.
Most apps sold through the Mac App Store (MAS) are the type that use the simple drag & drop installation. Those are downloaded directly to the designated apps folder and installation is done. Large pro-type apps download an installer to your Apps folder. Those you can install at your leisure. The MAS does not have a lot of apps using this type of installation.
Be sure to always backup your MAS purchases, because there is no guarantee that the app will always be available for download in the future and it is your responsibility to archive copies.

How can I make sure that in RAM our sql server is not facing any mermory crunch issue?

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks

The SQL server process always show RAM is highly used while its a default behaviour of sql server.
How can I make sure that in RAM our sql server is not facing any mermory crunch issue?
Thanks
The best way to make sure you are not facing memory pressure is to use perfmon counters and monitor various memory counters
For SQL Server 2005 - 2008 r2 use below counters
SQLServer:Buffer Manager--Buffer Cache hit ratio(BCHR): IIf your BCHR is high 90 to 100 Then it points to fact that You don't have memory pressure. Keep in mind that suppose somebody runs a query which request large amount of pages in that
case momentarily BCHR might come down to 60 or 70 may be less but that does not means it is a memory pressure it means your query requires large memory and will take it. After that query completes you will see BCHR risiing again
SQLServer:Buffer Manager--Page Life Expectancy(PLE): PLE shows for how long page remain in buffer pool. The longer it stays the better it is. Its common misconception to take 300 as a baseline for PLE. But it is not,I read it from
Jonathan Kehayias book( troubleshooting SQL Server) that this value was baseline when SQL Server was of 2000 version and max RAM one could see was from 4-6 G. Now with 200G or RAM coming into picture this value is not correct. He also gave the formula( tentative)
how to calculate it. Take the base counter value of 300 presented by most resources, and then determine a multiple of this value based on the configured buffer cache size, which is the 'max server memory' sp_ configure option in SQL Server, divided by 4 GB.
So, for a server with 32 GB allocated to the buffer pool, the PLE value should be at least (32/4)*300 = 2400. So far this has done good to me so I would recommend you to use it.
SQLServer:Buffer Manager--CheckpointPages/sec: Checkpoint pages /sec counter is important to know about memory pressure because if buffer cache is low then lots of new pages needs to be brought into and flushed out from buffer pool,
due to load checkpoint's work will increase and will start flushing out dirty pages very frequently. If this counter is high then your SQL Server buffer pool is not able to cope up with requests coming and we need to increase it by increasing buffer pool memory
or by increasing physical RAM and then making adequate changes in Buffer pool size. Technically this value should be low if you are looking at line graph in perfmon this value should always touch base for stable system.
SQLServer:Buffer Manager--Freepages: This value should not be less you always want to see high value for it.
SQLServer:Memory Manager--Memory Grants Pending: If you see
memory grants pending in buffer pool your server is facing SQL Server memory crunch and increasing memory would be a good idea. For memory grants please read this article:
SQLServer:memory Manager--Target Server Memory: This is amount of memory SQL Server is trying to acquire.
SQLServer:memory Manager--Total Server memory This is current memory SQL Server has acquired.
8. Free List Stalls/sec – Number of requests per second that had to wait for a free page
9. Free Pages – Total number of pages on all free lists (free lists track all of the pages in the buffer pool that are not currently allocate to a data page, and are therefore available for usage immediately)
NOTE: If you have NUMA system don't use PLE to monitor memory condition it wont give correct value
From 2012 Onwards
Memory management has become easy from 2012 onwards as
Max server memory also allocated memory for requests which require memory >8KB
SQLServer:Memory Manager:Free Memory (KB)
SQLServer:Memory Manager:Target Server Memory (KB)
SQLServer:Memory Manager:Total Server Memory (KB)
For NUMA system its also wort monitoring each node.
Object - SQLServer:Memory Node:Total Node Memory
(KB)
Object - SQLServer:Memory Node:Target Node Memory
(KB)
Object - SQLServer:Memory Node:Free Node Memory
(KB)
Ideally if target server memory is less than or equal to total server memory there wont be memory pressure if target is > total it does not always means its memory pressure
BCHR would also give you good idea about memory pressure
If memory grants pending is frequently non zero there is memory pressure
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Install Forms and Reports builder 11g without WebLogic Server

Hello Everybody,
Presently to install Forms and Reports builder 11g on a PC for developers, we need to install WebLogic Server prior to that.
For this, we need lot of resources. Hardware, to download big software bundles, memory resources, etc...
If we have a solution like *"Forms and Reports builder 11g and its tools as stand-alone distribution from Fusion Middleware technologies"* ........ no words from me.
Do you have a solution to install Forms and Reports Builder 11g without WebLogic Server?
Regards
murali krishna

hi
check out the following link.
Forms/Reports 11g Builder without WebLogic
sarah

How to use iPod as a DICTATION MACHINE?

I am about to purchase an Ipod, probably the 80 GB, and would like to know how I can use an iPod as a dictating machine, with the ability to start, stop, fast forward and fast rewind. Is there hardwware and software to that effect? Thank you very much for any help you can give me.
Peter Aldin.
Dell Windows XP
Dell Windows XP

Thank you very much for your interest.
I would like to use the ipod to listen to music. I would also like to use it as a dictating machine such as a dictaphone. This would entail the use of a microphone which can can start and stop, at which point the recording process would start or stop. It would also entail the ability to fast forward and rewind the dictation, as one would fast forward or rewind a tape.
Thank you again,
Peter Aldin ([email protected] if you prefer to email).

How to use Alcon in Flash Builder 4.5

I am using Alcon as memory and performance profilers.
I searched around the Internet, only found articles that talk about how to use it in Flash:
Debug.monitor(stage, 1000);
But what is the counterpart to this statement in Flex environment? What should I pass to monitor method?
Thanks.

Hi
Currently i haven't found any documentation describing how to compile and use this tlfx.
I went through the change log to see what was added, and it looked quite good.
I have tried to compile it, but my experience with fb4 is very limited. I have only worked with it for a couple of months.
I would like a description of how to compile and use this tlfx liblrary in a flex application, so that i can have table supprt as well as support for bullets and numbering.
TIA
Allan

How to use .MKV and .ISO with Premiere Pro? They are not supported.

Hi all. My brother in-law sent us two .mkv videos and a DVD .iso he wants me to use in a video I am cutting for him. The only trouble is, I've no idea how to get them into a format PremPro can handle.
I've searched and the only solutions I have found are infinitely complicated for me. Avisynth is certainly beyond me.
Anyone know of a way to convert .mkv (info lists 942x720 H.264 4:2:0 YUV MPEG4 AVC) into something useable?
Same question for an ISO file.
Thanks much
By the way, this is not for anything 'important' nor am I getting paid, so I have no budget tp purchase software. I am sure there must be a free solution.
I tried this trial version software...
http://www.moyea.com/import-flv/
But it would NOT install. It just errored in a loop and was unable to find or understand I have CS5 PremPro.

Can anyone explain how to use VLC to transcode? The settings are endless and NONE look correct. Everything is about coverting and shrinking and that is not what I want.
I have looked into this so many times and cannot find how to do it. I know it must be simple, but clearly I am blind.
What I need is to take whatever is inside that stupid MKV wrapper and extract it. Transcode it. I have been trying for A YEAR now and have never been able to find a solution.
I'm on a PC and unfortunately, there are free solutions for a MAC. But that won't help me.
EDIT: One option I see is tsMuxer! But which setting for Output? I can choose...
TS muxing... or M2TS musing... or Blu-ray disk... or AVCHD disk... or DEMUX
To explain more, I have a Blu-Ray I purchased and want to add the audio from my laserdisc, since the remixed audio on the disc sucks (hard). I'll also add English subtitles. To be clear, this work is for ME for my own personal use.
Here is a screen grab from tsMuxer. Which to choose? I will place the audio and video in Premiere Pro. Sync the old Laserdisc audio up and then EXPORT to Adobe Encore to burn a new BD.

MAP Toolkit - How to use this MAP tool kit for all SQL Server inventory in new work enviornment

Hi Every one
Just joined to new job and planning to do Inventory for whole environment so I can get list of all SQL Server installed . I downloaded MAP tool kit just now. So looking for step by step information to use this for SQL Inventory. If anyone have documentation
or screen shot and can share would be great.
Also like to run It will be good to run this tool anytime or should run in night time when is less activity?
Hoe long generally takes for medium size environment where server count is about 30 ( Dev/Staging/Prod)
Also any scripts that will give detailed information would be great too..
Thank you
Please Mark As Answer if it is helpful. \\Aim To Inspire Rather to Teach A.Shah

Hi Logicinisde,
According to your description, since the issue regards Microsoft Assessment and Planning Solution Accelerator. I suggestion you post the question in the Solution Accelerators forums at
http://social.technet.microsoft.com/Forums/en-US/map/threads/ . It is appropriate and more experts will assist you.
The Microsoft Assessment and Planning (MAP) Toolkit is an agentless inventory, assessment, and reporting tool that can securely assess IT environments for various platform migrations. You can use MAP as part of a comprehensive process for planning and migrating
legacy database to SQL Server instances.
There is more information about how to use MAP Tool–Microsoft Assessment and Planning toolkit, you can review the following articles.
http://blogs.technet.com/b/meamcs/archive/2012/09/24/how-to-use-map-tool-microsoft-assessment-and-planning-toolkit.aspx
Microsoft Assessment and Planning Toolkit - Technical FAQ:
http://ochoco.blogspot.in/2009/02/microsoft-assessment-and-planning.html
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

How to use the JRun Custom tag library wiith Weblogic 5.1?

Hello,
is it possible to use the JRUN Tag Library with Bea Weblogic 5.1? We
got an error message like:
weblogic.servlet.jsp.JspException: (line -1): Error in tag library at:
'jrun': T
here is no setter method for property 'code', for Tag class
'allaire.taglib.Serv
letTag'
Thank you for any info!
Stefan

Hi Joe,
I don't know, however someone that follows the JSP newsgroup [1] may be
able to help. Could you try your post there.
Thanks,
Bruce
[1]
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.jsp
Joe Kamenar wrote:
>
I have a question. I need to do a sort on news articles in our database, sorting
by the date they were posted. I then want to take only the top 6 articles. We
are using Weblogic 5.1. When I use the following statement, 6 articles are taken
from the database, then sorted, which ends up leaving out the most recent articles:
<cm:select contentHome="com.beasys.commerce.axiom.document.Document" query="<%=contentQuery%>"
sortby = "creationDate DESC, headlineDate DESC" max="6" id="contentList" />
I need to get ALL the articles for the sort, then just take the most recent 6.
So, I know that I can use the following code and monitor the counter variable,
"i". But, how do i do this to only display the top 6 items?
<es:foreachinarray id="content" array="contentList" type="com.beasys.commerce.axiom.content.Content"
counterId="i">
<% myStr=content.getIdentifier(); %>
<% if (i<6) {
%>
<div class="marginText">
<cm:printproperty id="content" name="title" encode="html" />
<a href="<%=new String(news_display.jsp?id="+myStr)%">">more</a>
</div>
<% } %>
</es:foreachinarray>
However, when I run this, no results show up. What is the correct way to do this?
- Joe</a>

How to use the JRun Custom tag library with Weblogic 5.1?

Hello,
          is it possible to use the JRUN Tag Library with Bea Weblogic 5.1? We
          got an error message like:
          weblogic.servlet.jsp.JspException: (line -1): Error in tag library at:
          'jrun': T
          here is no setter method for property 'code', for Tag class
          'allaire.taglib.Serv
          letTag'
          Thank you for any info!
          Stefan


Hi Joe,
I don't know, however someone that follows the JSP newsgroup [1] may be
able to help. Could you try your post there.
Thanks,
Bruce
[1]
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=xover&group=weblogic.developer.interest.jsp
Joe Kamenar wrote:
>
I have a question. I need to do a sort on news articles in our database, sorting
by the date they were posted. I then want to take only the top 6 articles. We
are using Weblogic 5.1. When I use the following statement, 6 articles are taken
from the database, then sorted, which ends up leaving out the most recent articles:
<cm:select contentHome="com.beasys.commerce.axiom.document.Document" query="<%=contentQuery%>"
sortby = "creationDate DESC, headlineDate DESC" max="6" id="contentList" />
I need to get ALL the articles for the sort, then just take the most recent 6.
So, I know that I can use the following code and monitor the counter variable,
"i". But, how do i do this to only display the top 6 items?
<es:foreachinarray id="content" array="contentList" type="com.beasys.commerce.axiom.content.Content"
counterId="i">
<% myStr=content.getIdentifier(); %>
<% if (i<6) {
%>
<div class="marginText">
<cm:printproperty id="content" name="title" encode="html" />
<a href="<%=new String(news_display.jsp?id="+myStr)%">">more</a>
</div>
<% } %>
</es:foreachinarray>
However, when I run this, no results show up. What is the correct way to do this?
- Joe</a>

I can not find how to use the basic Mac air keyboard. where do i find it or do a tutorial board

I am new to the Mac worls and hardly used a PC . I used a Blackberry. How can i find how to use the macair key board. I can not get the plus sign or the brackets on my leyboard to work. The option key is called the atl key.. There is no easy guide for how to use all the Buttons on the Key board. where do i find them

Hello Sanjit_Das:
sorry for my english again !.
My purpose is almost the same as this:
https://forums.adobe.com/message/6137964#6137964#6137964
But I do not know which path must specify when the video is uploaded to assets:
Sorry to ask something so absurd.
I tried putting all
<source src = "assets / Myvideo.mp4" />
not working
<source src = "C: \ Users \ Angel \ Downloads \ NEW \ pruebamusevideo \ assets/Myvideo.mp4">
not work.
etc
Presenting want to work from any computer, DVD, memory stick ...
I'm going crazy.
I know it's something about the route.
From muse Vimeo links to work, but when I export them to HTML not working. I guess it's a problem related to the same.
Thank you very much again.

How to use wlappc on a build machine where weblogic server is not installed

Similar Messages

Maybe you are looking for