How to use Zebra print chinese in a label?

Hi Everyone,
I got a problem in printing chinese in a label.Also i have download zebra fonts and test two of them.But it seems not work.Should i upload a specific font by se73? Or use any command to control this?
thanks advance.
Andy Lee.

No. One label, one font, size and color.

Similar Messages

Printing Chinese Characters on Labels using ZEBRA

Dear all,
Could someone tell me how to Print Chinese characters on labels using ZEBRA Printer.
Thanks & Regards,
Joseph.

Hi Joseph,
How were u able to resolve your issue on Chinese font printing using Zebra? This is because I'm supposed to print Chinese texts & data using Zebra label printer. The problem is, inspite of using the Chinese font residing in the printer's memory card, i am not getting any output whenever i run a standard SAP report (VL74) calling a customized saprscipt report. Please help check my codes below. Also, I'm not sure of the command ^A1B, if it is still needed everytime i try to print a text, since i already used the command ^CW1,B:MSUNG.FNT.
I placed them in the Main area of Sapscript. Thanks in advance.
PERFORM 'GET_MORE_DATA' IN PROGRAM 'ZTEST'
USING &NAST-KSCHL&
USING &VBPLK-VENUM&
USING &VBPLK-VPOBJKEY&
USING &VBPLA-KUNWE&
CHANGING &GF_MAKTX&
CHANGING &GF_VEMNG&
CHANGING &GF_KDMAT&
CHANGING &GF_VBELN&
CHANGING &GF_MATNR&
ENDPERFORM
/:NEW-PAGE
/ ^XA
/ ^CW1,B:MSUNG.FNT
/ DFZ5L3_L-1FS
/ ^PRC
/ LH0,0FS
/ ^LL1981
/ ^MD0
/ ^MNY
/ LH0,0FS
/ FO700,649A1B,48,0FRFN999^FS
/ FO1084,309A1B,46,0CI0FRFN998FS
/ FO315,330A1B,46,0CI0FRFN997FS
/ FO459,1351A1B,46,0CI0FRFN996FS
/ FO829,396A1B,46,0CI0FRFN995FS
/ FO54,1777A1B,46,0CI0FRFD中文 1FS
/ FO186,1774A1B,46,0CI0FRFD中文 2FS
/ FO318,1774A1B,46,0CI0FRFD中文 3FS
/ FO315,814A1B,46,0CI0FRFD中文 4FS
/ FO456,1777A1B,46,0CI0FRFD中文 5FS
/ FO12,18GB1162,1942,6^FS
/ FO147,18GB135,1942,6^FS
/ FO411,18GB135,1942,6^FS
/ FO660,18GB135,1942,6^FS
/ FO916,18GB135,1942,6^FS
/ ^XZ
/:NEW-PAGE
/ ^XA
/ ^XFZ5L3_L-1.ZPL
/ FN999FD&GF_MAKTX&^FS
/ FN998FD&GF_VEMNG&^FS
/ FN997FD&GF_KDMAT&^FS
/ FN996FD&GF_VBELN&^FS
/ FN995FD&GF_MATNR&^FS
/ ^PQ1,0,1,N
/ ^XZ
/ ^FX End of job

How to use the print option for photos?

How to use the print option for photos. I have a wireless printer but how do I set it up?

http://www.apple.com/support/iphone/assistant/airprint/

Rotation of label using smartforms by 90 deg using zebra printer

Hi,
I am facing one problem using smartforms for label printing. Since the zebra printer which is being used requires 90 deg rotation of form for the normal smartform design. I have even tried using ZPL commands by using ^FWR command in the window attributes but the text within that window only gets rotated and each line gets overwritten on one another. Please let me know if it s possible to rotate the complete form in smartform for label printing using zebra printer.
Thanks and Regards
Anand

Hi Anand,
Check my previous thread below about this:
Re: print label landscape to zebra printer - text position wrong & overlapping
regards,
Aidan

Printing sapscript label using zebra printer

Hi,
Can anybody please help me regarding "printing sapscript label using zebra printer"?
i hav set the following print default settings in the transaction mb90:
output device :
NO01
device type: YZZX_ZEB
but when i try to print ,i am getting error message stating that "the respective sapscript form is not active ".
i hav also attached my print program for ur easy reference.
====================================================================*
FORM open_form_slv.
*' Description:
*' Add information for the SAP spooler
*' Change the name of the standard customized form for Zebra print
*' Last Change Vers Programmer   Reason
*1
DATA: BEGIN OF print_infos.
          INCLUDE STRUCTURE itcpo.
DATA: END OF print_infos.
DATA: form_name(16) TYPE c, char1(1) TYPE c, ind_beg TYPE i.
PERFORM itcpo_fuellen.
MOVE-CORRESPONDING itcpo TO print_infos.
WRITE sy-datum USING EDIT MASK '__.__.____'
                                           TO print_infos-tdcovtitle+1.
WRITE sy-uzeit USING EDIT MASK '__:__:__'
                                          TO print_infos-tdcovtitle+12.
CONCATENATE itcpo-tddest sy-uname ' PO'(001) ekpo-ebeln ' Doc.No'(002)
                                       mseg-mblnr print_infos-tdcovtitle
                          INTO print_infos-tdcovtitle SEPARATED BY space.
form name from the table YZZM_GR_LABEL
IF NOT g_fonam IS INITIAL.
    tnapr-fonam = g_fonam.
ENDIF.
if the used printer is a Zebra label printer, then the customized
layout set name ???_???_XXX will be changed to ???_???_ZP
SELECT SINGLE * FROM tsp03d WHERE padest = nast-ldest.
IF tsp03d-patype = 'YZZX_ZEB'.
    ind_beg := 15.
    WHILE ind_beg > -1.
      char1 := tnapr-fonam+ind_beg.     " substr(tnapr-fonam,ind_beg,1)
      IF char1 = '_'.
        form_name := tnapr-fonam(ind_beg).
        CONCATENATE form_name '_ZP' INTO tnapr-fonam.
        EXIT.
      ENDIF.
      ind_beg := ind_beg - 1.
    ENDWHILE.
ENDIF.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = print_infos
      form     = tnapr-fonam
      dialog   = ' '.
x_open := x.
IF mseg-weanz = 0. mseg-weanz = 1. ENDIF.
IF syst-tcode <> 'MB90' AND NOT g_flag_popup IS INITIAL.
check for requirement of printing label and ask for gr-quantities (popup)
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln.
    CLEAR yzzm_gr_quantity-no_popup.
ELSE.
and ask not for gr-quantities
    IF syst-tcode = 'MB90'.
      yzzm_gr_quantity-erfmg := mseg-menge.
    ELSE.
      yzzm_gr_quantity-erfmg := mseg-menge / mseg-weanz.
    ENDIF.
    yzzm_gr_quantity-no_popup := x.
ENDIF.
determination inspection lot number
CLEAR qals-prueflos.
SELECT SINGLE * FROM qals WHERE mblnr = mseg-mblnr
                       AND zeile = mseg-zeile
                       AND mjahr = mseg-mjahr.
determination vendor batch
CLEAR mch1-licha.
SELECT SINGLE * FROM mch1 INTO mch1 WHERE matnr = mseg-matnr
                                        AND charg = mseg-charg.
ENDFORM.                    "open_form_label
=================================================================== *
FORM we01_print_slv.
*' Description:
*' print out of hazardous symbol
*' controls the Zebra printer
*' Last Change Vers Programmer   Reason
*****26.09.2007 Starts
DATA: l_objky TYPE nast-objky,"Object key
        l_vstat TYPE nast-vstat. "Processing status of message
*****26.09.2007 Starts
TABLES: mgef, t300.
FIELD-SYMBOLS: .
DATA: aux_index LIKE sy-index.
DATA: count_haz_sym, position TYPE n, zw TYPE p DECIMALS 1.
DATA: aux_value(5) TYPE c.
DATA: txt(10) TYPE c, pos(5) TYPE c.
t001w-werks = r_werks.
t001w-name1 = r_name1.
PERFORM read_address.
*2
SELECT SINGLE * FROM ekpo WHERE ebeln = mseg-ebeln
                              AND ebelp = mseg-ebelp.
CLEAR mara-stoff.
SELECT SINGLE stoff INTO mara-stoff FROM mara WHERE matnr = mseg-matnr.
IF NOT mara-stoff IS INITIAL.
    CLEAR t300.
    SELECT SINGLE * FROM t300 WHERE lgnum = mseg-lgnum.
    IF NOT sy-subrc IS INITIAL.
for plants without warehouses try to use the country code
      CASE mseg-werks.
        WHEN 'BUP'.
          t300-regkz := 'US '.
      ENDCASE.
    ENDIF.
    CLEAR mgef.
    SELECT SINGLE * FROM mgef WHERE stoff = mara-stoff
                              AND   regkz = t300-regkz.
ENDIF.
in case of more then one label, use for each a new output window
(not only for the first)
IF g_count > 1.
    CALL FUNCTION 'CONTROL_FORM'
      EXPORTING
        command = 'NEW-WINDOW'.
ENDIF.
Ausgabe Gefahrstoffsysmbole        Neustadt, V.Hilgert 14.07.98
*For output type YNL7, the hazardous warning symbol has to be printed at the bottom of the label.So label is called before that.
IF tnapr-kschl = 'YNL7'.
    CALL FUNCTION 'WRITE_FORM'
      EXPORTING
        element = 'LABEL'.
ENDIF.
count_haz_sym = 0. position = 0.
WHILE count_haz_sym = 'XN'.
For output type YNL7, the width of the standard text is small.
      IF tnapr-kschl = 'YNL7'.
        zw = position * '0.2' + '0.1'. pos = zw.
      ELSE.
        zw = position * '1.3' + '0.1'. pos = zw.
      ENDIF.
      IF tsp03d-patype = 'YZZX_ZEB'. " device type for ZEBRA label priter
        aux_value := count_haz_sym.
      ELSE.
        aux_value := pos.              " HP/Kyocera or other laser printer
      ENDIF.
      CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
        EXPORTING
          name   = '&XPOS&'
          value = aux_value
        EXCEPTIONS
          OTHERS = 1.
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          element   =
          window    = 'MAIN'
        EXCEPTIONS
          element   = 1
          function = 2
          type      = 3
          unopened = 4
          unstarted = 5
          window    = 6
          OTHERS    = 7.
      IF sy-subrc = 0.
*Varying the position for YNL7
        IF tnapr-kschl = 'YNL7'.
          position = position + 2.
        ELSE.
          position = position + 1.
        ENDIF.
      ENDIF.
    ENDIF.
ENDWHILE.
IF NOT mseg-vfdat IS INITIAL.
    am07m-mhtxt = text-105.
ENDIF.
IF NOT am07m-mhdat IS INITIAL.
    am07m-mhztx = text-106.
ENDIF.
IF ekko-bsart = 'UB'.
    am07m-litxt = text-101.
    am07m-libzg = ekko-reswk.
ELSE.
    am07m-litxt = text-100.
    am07m-libzg = ekko-lifnr.
ENDIF.
belpos-mblnr = mkpf-mblnr.
belpos-zeile = mseg-zeile.
CONDENSE belpos NO-GAPS.
am07m-belpos = belpos.
IF t156-shkzg = h.
    am07m-hdlne = text-020.
ELSE.
    am07m-hdlne = text-010.
ENDIF.
Ausgabe der Etiketten mit den ind. Mengen
IF NOT g_flag_popup IS INITIAL.
    SELECT SINGLE * FROM yzzm_gr_quantity WHERE ebeln = mseg-ebeln
                                          AND   weanz = g_count.
ELSE.
* print the number of labels is handeled by the Zebra printer
IF tsp03d-patype = 'YZZX_ZEB'. " device type for Zebra label prts
g_lbls_tot := mseg-weanz - g_count + 1.
g_break_print := x.
ENDIF.
ENDIF.
mseg-erfmg := yzzm_gr_quantity-erfmg.*
********26.09.2007 Starts
CONCATENATE mseg-mblnr mseg-mjahr mseg-zeile INTO l_objky.
SELECT SINGLE vstat INTO l_vstat FROM nast WHERE kappl = 'ME' AND
objky = l_objky AND
kschl = 'YNL7'.
********26.09.2007 Ends
CALL FUNCTION 'TEXT_SYMBOL_SETVALUE'
EXPORTING
name = '&nummer&'
value = g_count.
IF tnapr-kschl <> 'YNL7'.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
element = 'LABEL'.
else.
CALL FUNCTION 'WRITE_FORM'
EXPORTING
ELEMENT = 'BAR_CODE'
EXCEPTIONS
ELEMENT = 1
FUNCTION = 2
TYPE = 3
UNOPENED = 4
UNSTARTED = 5
WINDOW = 6
BAD_PAGEFORMAT_FOR_PRINT = 7
SPOOL_ERROR = 8
CODEPAGE = 9
OTHERS = 10.
IF sy-subrc <> 0. MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
     ENDIF.
ENDIF.
ENDFORM.                    "GR_label_print
*&      Form lesen
      text
     -->OBJKY      text
FORM lesen USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-evers IS INITIAL.         "Versandvorschriften lesen.
    PERFORM t027_lesen.
ENDIF.
PERFORM bestellung_lesen.
IF NOT ekpo-knttp IS INITIAL AND NOT
         ekpo-weunb IS INITIAL.
    PERFORM kontierung_lesen.           "für multikontierte Bestellungen
ENDIF.
IF NOT mseg-ematn IS INITIAL.
    PERFORM lesen_htn.
ELSE.                                                     "111277/PH
    CLEAR am07m-mfrpn.                                      "111277/PH
ENDIF.
IF mseg-matnr IS INITIAL.
    mseg-menge = mseg-bpmng.
    mseg-meins = mseg-bprme.
    PERFORM bestelltext_lesen.
    CLEAR mabdr.
ELSE.
    PERFORM material_lesen.
ENDIF.
PERFORM tab024_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen
Lesen für WE-Schein Fert.Auftrag -
FORM lesen_wf USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
PERFORM auftrag_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ELSE.
    mseg-menge = mseg-erfmg.
    mseg-meins = mseg-erfme.
ENDIF.
PERFORM tab024d_lesen.
PERFORM t064b_lesen.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wf
Lesen für Warenausgang -
FORM lesen_wa USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
PERFORM ladr_lesen.
ENDFORM.                    "lesen_wa
Druck Vorbereiten -
FORM open_form.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      dialog   = ' '.
PERFORM lesen_t159p.
x_open = x.
ENDFORM.                    "open_form
Druck Vorbereiten Sammelscheine -
FORM open_form_sammel.
PERFORM lesen_t159p.
PERFORM itcpo_fuellen.
CALL FUNCTION 'OPEN_FORM'
    EXPORTING
      device   = 'PRINTER'
      language = language
      OPTIONS = itcpo
      form     = tnapr-fonam
      dialog   = ' '.
x_open = x.
ENDFORM.                    "open_form_sammel
Druck schließen -
FORM close_form.
CHECK NOT x_open IS INITIAL.
CALL FUNCTION 'CLOSE_FORM'.
CLEAR x_open.
ENDFORM.                    "close_form
Hilfsfelder versorgen für Sammelscheindruck -
FORM helpdata1.
   *mkpf = mkpf.
   *mseg-lgort = mseg-lgort.
   *ladr = ladr.
save_mkpf = *mkpf-usnam.
save_mblnr = *mkpf-mblnr.
save_budat = *mkpf-budat.
save_cpudt = *mkpf-cpudt.
save_ematn = *mseg-ematn.
save_lgort = *mseg-lgort.
save_ladr = *ladr.
   *t001w = t001w.
save_werks = *t001w-werks.
save_name1 = *t001w-name1.
   *ekko = ekko.
   *am07m = am07m.
save_lifnr = *ekko-lifnr.
save_ebeln = *ekko-ebeln.
save_ekgrp = *ekko-ekgrp.
save_linam = *am07m-name1.
save_lina2 = *am07m-name2.
   *t024 = t024.
save_eknam = *t024-eknam.
save_ektel = *t024-ektel.
   *mkpf-usnam = old_mkpf.
   *mkpf-mblnr = old_mblnr.
   *mkpf-cpudt = old_cpudt.
   *mkpf-budat = old_budat.
   *mseg-ematn = old_ematn.
   *mseg-lgort = old_lgort.
   *ladr = old_ladr.
   *t001w-werks = old_werks.
   *t001w-name1 = old_name1.
   *t024-eknam = old_eknam.
   *t024-ektel = old_ektel.
   *ekko-lifnr = old_lifnr.
   *ekko-ebeln = old_ebeln.
   *ekko-ekgrp = old_ekgrp.
   *am07m-name1 = old_linam.
   *am07m-name2 = old_lina2.
save_lfa1 = lfa1.
IF NOT old_lfa1 IS INITIAL.
    lfa1 = old_lfa1.
ENDIF.
ENDFORM.                                                    "helpdata1
--- Versorgung der Hilfsfelder vor CLOSE_FORM bei Sammelscheindruck --
FORM helpdata2.
old_lfa1 = save_lfa1.
lfa1     = save_lfa1.
old_mkpf = save_mkpf.
old_lgort = save_lgort.
old_ladr = save_ladr.
old_budat = save_budat.
old_cpudt = save_cpudt.
old_werks = save_werks.
old_name1 = save_name1.
old_mblnr = save_mblnr.
old_lifnr = save_lifnr.
old_linam = save_linam.
old_lina2 = save_lina2.
old_ebeln = save_ebeln.
old_ekgrp = save_ekgrp.
old_eknam = save_eknam.
old_ektel = save_ektel.
old_ematn = save_ematn.
   *mkpf-usnam = save_mkpf.
   *mkpf-mblnr = save_mblnr.
   *mkpf-budat = save_budat.
   *mkpf-cpudt = save_cpudt.
   *mseg-ematn = save_ematn.
   *mseg-lgort = save_lgort.
   *ladr = save_ladr.
   *t001w-werks = save_werks.
   *t001w-name1 = save_name1.
   *t024-eknam = save_eknam.
   *t024-ektel = save_ektel.
   *ekko-lifnr = save_lifnr.
   *ekko-ebeln = save_ebeln.
   *ekko-ekgrp = save_ekgrp.
   *am07m-name1 = save_linam.
   *am07m-name2 = save_lina2.
ENDFORM.                                                    "helpdata2
Form Lesen Warenausgang Lohnbearbeiter -
FORM lesen_wlb USING objky.
nast_key = objky.
CLEAR retco.
SELECT SINGLE * FROM mkpf WHERE mblnr = nast_key-mblnr
                            AND   mjahr = nast_key-mjahr.
SELECT SINGLE * FROM mseg WHERE mblnr = mkpf-mblnr
                            AND   zeile = nast_key-zeile
                            AND   mjahr = mkpf-mjahr.
IF sy-subrc NE 0.
    retco = sy-subrc.
    EXIT.
ENDIF.
PERFORM tab156_lesen.
xskkz = t156-rstyp.
PERFORM tab001w_lesen.
IF NOT mseg-matnr IS INITIAL.
    PERFORM material_lesen.
ENDIF.
ON CHANGE OF mseg-lifnr.
    PERFORM read_address.
ENDON.
ENDFORM.                    "lesen_wlb
*eject
Fuellen der ITCPO -
FORM itcpo_fuellen.
IF xscreen NE space.
*- Testausgabe auf Bildschirm -
    itcpo-tdpreview = 'X'.
    itcpo-tdnoprint = 'X'.
ELSE.
    CLEAR: itcpo-tdpreview,
           itcpo-tdnoprint.
ENDIF.
MOVE-CORRESPONDING nast TO itcpo.
itcpo-tdcover   = nast-tdocover.
itcpo-tddest    = nast-ldest.
itcpo-tddataset = nast-dsnam.
itcpo-tdsuffix1 = nast-dsuf1.
itcpo-tdsuffix2 = nast-dsuf2.
itcpo-tdimmed   = nast-dimme.
itcpo-tddelete = nast-delet.
itcpo-tdcopies = nast-anzal.
itcpo-tdprogram = sy-repid.
ITCPO-TDTELELAND = US_COUNTRY.
itcpo-tdsenddate = nast-vsdat.
itcpo-tdsendtime = nast-vsura.
itcpo-tdnewid   = x.
ENDFORM.                    "itcpo_fuellen
*eject.
------------ FORM lesen der Lagerortadr. ---------------------------*
FORM ladr_lesen.
DATA:    BEGIN OF addr_sel.
          INCLUDE STRUCTURE addr1_sel.
DATA:    END OF addr_sel.
CLEAR ladr.
SELECT SINGLE * FROM twlad WHERE werks = mseg-werks
                       AND lgort = mseg-lgort
                       AND lfdnr = '001'.
IF NOT twlad-adrnr IS INITIAL AND sy-subrc IS INITIAL.
    MOVE twlad-adrnr TO addr_sel-addrnumber.
ENDIF.
CALL FUNCTION 'ADDR_GET'
    EXPORTING
      address_selection = addr_sel
    IMPORTING
      sadr              = ladr
    EXCEPTIONS
      OTHERS            = 1.
ENDFORM.                    "ladr_lesen
**&      Form REPRINT
      text
*FORM reprint.
TABLES : nase.
DATA : x TYPE string.
IF nase-vermo = 2.
   x = 'REPRINT'.
ENDIF.
*ENDFORM.                    "REPRINT
Kindly do the needful.
Thanks in advance
Regards
Swarna

Hi Swarna,
CALL FUNCTION 'OPEN_FORM'
EXPORTING
device = 'PRINTER'
language = language
OPTIONS = print_infos
<b>form = tnapr-fonam</b>
dialog = ' '.
x_open := x.
I thing its not a good way to pass the Form name to the Parameter.
Try like,
data : temp_form like tnapr-fonam.
<b>form = temp_form</b>
Thanks.

How To use window.print() into Button Attributes

hi,
I want to print a report using an print button.so i am using window.print() function into Button Attributes .But Print pop up screen not pop up . How To use window.print() into Button Attributes .
Thanks
Manoj

dear hari
"Set button target as URL and put following js as URL Target
javascript:window.print();"
Will this be useful to my another thread raised as follows.
In case, if i am able to generate report as txt (ascii) file instead of doc / pdf and is it possible to send the txt file using host command. I am uable to try since i do not know where to place host command on click &print.
yours
dr.s.raghunathan

Who has figured out how to use a print server with LR 2.1?

Who has figured out how to use a print server with LR 2.1?
Mac OS 10.4.11, G5 2.3 dual, 8 GB RAM. PS CS 3 Dual monitors
Print server is Mac G4 dual 533 (audio)
Epson Pro 9600 and Epson R2400 Both are connect by USB. Could be connected with FW 400.
I can use a print server with PS However color management does not come through when using a print server and LR. Image prints, but color horrendous.
All custom .icc profiles are on both the G5 and the print server, G4 dual 533 (audio)

Hi,
Based on my research, if we want to filter events based on user name, we need to edit the XML query.
Please refer to this blog below:
Advanced XML filtering in the Windows Event Viewer
http://blogs.technet.com/b/askds/archive/2011/09/26/advanced-xml-filtering-in-the-windows-event-viewer.aspx
Best Regards,
Amy

Unable to print chinese characters in Smartforms use Zebra printer

Hi,all.
My printer is Zebra ZM400 300dpi,I created a new output device 'TestDevice' and use the Lzeb3 Device type.
In my smartofrms i used the Zebra command to rotated text.Now the smartforms counld not print chinese characters but '#' instead.(style font 'ANDALE_S')
Anyone could help me....
Thanks Advance.
Andy Lee.

Hello Andy,
If you use the device type LZEBU3 with font ANDALE_S, then when you print then the SAP system
send a print control for activating the ANDALE font installed on the printer, and the text should
be outputed over this font.
When you get # during print then this means that the device type or the SAP font don't support
this character(this was the original problem), when you get a "space" then this means that the
font which is used by the printer don't support this character.
I think this can have 2 causes in your case:
1. The SAP system use the print control SF000 when you use ANDALE_S, which contains
the print control ^CI17^F8 in HEX form. This should activate the ANDALE font on your printer.
(You can find this under tr. SE73 -> Printer Fonts -> LZEBU3 -> ANDALE_S)
You should check wheter this is the correct print control. You should find on the printer an option
which list you all installed fonts, and also the print control which can be used for activating it.
Compare this print control from the printer with the above print control from the SAP system.
If you see a differnce then change the print control in the SAP system.(Before you do that please
copy the device type LZEBU3 into customer namespace, don't change the original SAP device type)
2. The font installed on the printer don't support the character which you use. Contact Zebra to confirm this, and ask for a ANDALE font which supports the character.
Best regards,
Norbert

How to use Linux Print queue in client_text_io.fopen to print from Windows

We have a forms application deploed on LINUX (Oracle application server 10g).
I have to print a file from local windows PC to a linux Print Queue from forms
I have the following code
PROCEDURE file_to_printer (i_filename_output IN VARCHAR2
,i_network_printer IN VARCHAR2) IS
l_line VARCHAR2(2000);
l_fileid_output client_text_io.file_type;
l_fileid_print client_text_io.file_type;
BEGIN
l_fileid_output := client_text_io.fopen (i_filename_output,'R');
l_fileid_print := client_text_io.fopen (i_network_printer,'W');
WHILE 1 = 1 LOOP
client_text_io.get_line (l_fileid_output, l_line);
client_text_io.put_line (l_fileid_print, l_line);
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
client_text_io.fclose (l_fileid_output);
client_text_io.fclose (l_fileid_print);
END file_to_printer;
Everything works fine if I use a windows printer like \\machine\printer.
I want to use a Linux printer and specified the print queue as
\\machine\print_queue_name. It's not working
and I get error ORA-302000 on the following line
l_fileid_print := client_text_io.fopen (i_network_printer,'W');
and if I give only the queue name no error but it's not printing.
Could you please tell me how to use a Linux/Unix print queue in this situation

the simplest way is to edit the interface file (look in /etc/lp/interfaces for existing printers). Each script is
run per print job where stdin has your print data, and stdout is going to your print device. You can just
send the output to a file instead (assuming you can create a file in the windows directory from the solaris
box). If it's a network share, you could use smbclient.
-r

How to Use Web Printing with Microsoft Excel

Hello,
In the recent How to paper on Use Web Printing with Microsoft Excel, describes few ABAP classes and methods. Can those classes be modified to access much more Microsoft excel objects , such as Macro ? Does any body has tried in those lines ? Any suggestions is eagerly awaited.
regs
D Bret

Hi BW people,
Since we want to modify our reports for printing (and the How-To about enhancement of web printing does not really answer to our requirements) it seems that the Excel alternative is just what we were looking for.
Unfortunately I have been working with these classes for 6 hours now to get a very simple Excel file, but without success. I did fix the bug like Thomas Kauffman told on the forum, changed the dataprovider and prefixes and I followed every single step of the How-To document(also the check of folder options to open/save the .xls file),... The only thing that happens: the URL has changed (bookmark) and the page is reloaded again.
So no Excel file, neither a dialogue box. I also walked -a very long time- through the code (in debugging mode) starting from ZCL_RSR_XLS_HELP_WINDOW_PRINT->PROCESS_CMD but I can't find anything!
Is there anybody with the same problem and -better- with a possible solution to it?
Thank you very much in advance!

Have hp psc 1510xi all in one, i wan to know how to use this printer as fax

Hi, I am new to this forum, i want to know how can i use this printer as fax. this is psc 1510xi all in one.
Thanks
Nat

hi there,
could you provide the community with a little more information to help narrow troubleshooting? What operating system are you using?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Powershell 4.0 How to use Add-Printer to add printer for all users (machine)

Is there a way I can use Powershell 4.0 Add-Printer cmdlet to add a printer for all users (machine)? I tried from an admin account but it only adds a printer for the currently logged on user.
thanks.

Adding a printer for all users requires having access to their profiles (and registry hive for user) to save the mapped printer information. Your best bet is to either use Group Policy Preferences or write a user logon script that ones when they log in and
maps the printer if not already mapped.
Group Policy Preferences Example
I wrote an article a while back that shows how to use a GPO logon script to map a printer. It doesn't use V4, but the process would be the same as far as a GPO goes.
http://learn-powershell.net/2012/11/15/use-powershell-logon-script-to-update-printer-mappings/
Boe Prox
Blog |
Twitter
PoshWSUS |
PoshPAIG | PoshChat |
PoshEventUI
PowerShell Deep Dives Book

TS3308 How can use the printer with iPad

How can you use the printer ( that is connected wirelessly to the same network ) with iPad

iOS AirPrint Printers http://support.apple.com/kb/HT4356
How to Print from Your iPad: Summary of Printer and Printing Options
http://ipadacademy.com/2012/03/how-to-print-from-your-ipad-summary-of-printer-an d-printing-options
Print from iPad / iPhone without AirPrint
http://ipadhelp.com/ipad-help/print-from-ipad-iphone-without-airprint/
How to Enable AirPrint on a Mac and Use Any Printer
http://ipadhelp.com/ipad-help/how-to-use-airprint-with-any-printer/
 Cheers, Tom

How to Use Remote Printer's FAX and Scanner on Win 7

HP LaserJet 3050 hosted by an XP computer. I've been able to install it for printing from a Win 7 machine but I can't find a way to install its fax or scanner functions. I tried using the printer driver to print to the fax and it corrupted the XP's spool program requiring an entire C:\ drive restore from backup!
I have the HP 64 bit driver for the printer, and I can see in the list of .inf files one that seems to be for fax, but I can't make it install.

Hello colinobj,
I have looked at the link that you have provided that gives the steps to resolve the installation issue.
Just so you are aware, this is the solution to the issue at hand. Seeing that XP is on its way of being not supported, this is the best solution that Bob_Headrick has provided.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How IPAD use the Printer which connected with the Time Capsule

I connnected a printer to time capsule. And I can use the printer in Windows. But I can't use it on IPAD and IPHONE.
So are there any solutions?

iOS devices can only print directly to AirPrint printers. Wireless printers or printers connected to a Time Capsule are not necessarily AirPrint capable.
To print directly from an iPad / iPhone you will need an AirPrint compatible printer or another device to act as a print server. That can be a Mac computer running Printopia ($19.95 with free trial) or handyPrint (donation - supported). The Mac must be "on" but may be asleep for them to work. Equivalent PC options exist but you're on your own finding them.
You can also buy this standalone print server:
http://www.lantronix.com/it-management/xprintserver/xprintserver.html
The xPrintServer Home Edition will support a directly connected USB printer. The Network Edition will support any network printer.
These options enable you to use any printer available to your Mac, even older ones that may predate AirPrint by decades.
Otherwise you will need to buy an AirPrint printer or multifunction device.

How to use Zebra print chinese in a label?

Similar Messages

Maybe you are looking for