How to use ZSLFN transaction type

Dear Experts,
We are using standard service desk functionality and we have two transaction types named SLFN & ZLFN.We have a BW & ECC system connected to our solution manager.My requirement is that the BW system should use SLFN transaction type and ECC should use ZLFN transaction type.
Regards,
Sachin.

I think it is possible.
In CRMC_UI_NBLINKS if you look at the logical links you can see that SRV-ORD-DC has a Parameter of 'SRVO' with a certain Parameter Class.
If you were to check SPRO->CRM->Transactions_Basic Settings->Transaction Types you will see that SRVO exists as an entry. This logical ink is therefore using this Transaction type to extract characteristics etc.
Having said that, I need to call the sales order create with a certain transaction type, so I copied SLS-SLO-CR to a Z copy, added the Parameter of 'Z111' and also used the Parameter class of CL_CRM_UIU_BT_PARAM_CREATE.
This should now, in theory all work, and show the exact same transaction in the Webclient IC as it does in the Winclient IC as they are both using the same Transaction type. However, the Webclient transaction looks different in terms of fields etc., so I don't think it's working. after all.
Jason

Similar Messages

How to use Z transaction type while in the Transaction launcher Wizard?

In SPRO->CRM->Transactions->Basic Settings->Define transaction Types I can see a whole host of Z transaction types.
These define all sorts of business transaction defaults. Within the Transaction launcher Wizard there is a Transaction Type that can be entered, but I can only see three options, being 'BOR Transaction', 'URL Transaction' and ' M', for some reason. None of the transaction types shown in the above SPRO path are displayed.
Does anyone know how I can use my Z transation type. These are used by the config behind the Action Boxes for the Winclient IC, but I can not get the Transaction launcher wizard to see or use these. The SAP How-to Guide to tha Transaction Launcher says that only BOR and URL Transactions can be used (unless you have IS-U). If this is true then how does one provide all the information provided by the Transaction type. The whole idea of the transaction type is default this information in one area.
Anyone.
Jason

I think it is possible.
In CRMC_UI_NBLINKS if you look at the logical links you can see that SRV-ORD-DC has a Parameter of 'SRVO' with a certain Parameter Class.
If you were to check SPRO->CRM->Transactions_Basic Settings->Transaction Types you will see that SRVO exists as an entry. This logical ink is therefore using this Transaction type to extract characteristics etc.
Having said that, I need to call the sales order create with a certain transaction type, so I copied SLS-SLO-CR to a Z copy, added the Parameter of 'Z111' and also used the Parameter class of CL_CRM_UIU_BT_PARAM_CREATE.
This should now, in theory all work, and show the exact same transaction in the Webclient IC as it does in the Winclient IC as they are both using the same Transaction type. However, the Webclient transaction looks different in terms of fields etc., so I don't think it's working. after all.
Jason

Asset Settlement You cannot use this transaction type to post to this asset

Hi All,
A CAPEX is created. An Asset is created. The asset is assigned to CAPEX under settlement rule. Out of several purchases made against the CAPEX, settlement for 2 months are carried out and the value of CAPEX was transferred to Asset.
However, during the current month, while doing the settlement, the system is giving the following error :-
"You cannot use this transaction type to post to this asset"
Message no. AA 834
The details diagnosis of the error message is
"The transaction type entered belomgs to transaction type group 15. It has been specified for this transaction type group, that it is only allowed to post to asset classes for which it has been explicitly allowed (for example, the asset class for assets under construction). The asset to which you are posting belongs to class PM-501 (chart of depreciation DEIL). You cannot post to this asset class using the transaction type entered"
Request to please let me know what could be the possible reasons for system giving such message adn how to rectify it.
Regards
Santosh

Hi Santosh,
I would suggest that you Check the <b>asset number</b> you entered. You may want to allow posting to this asset class using this transaction type group. If this is not the case, then, you may have to ask the business to reverse the initial posting causing this error and re-post with the correct transaction type that is allowed for this asset class.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

How to use the customer types in customer master data

how to use the customer types in customer master data?
menu path is Extras -> account group info -> customer types

hi,
This is an option given to you to choose (if you need to) the way you perceive this customer.Here you get options including ompetitors,Salespartner, prospect,
default sp ,consumer.
See it helps you to differentiate between prospect(which you may use for quotation or inquiry purpose)Sales partner and the competetor.
I hope this clarifies your quiery.Reward points if so.
Thanking you,
Best regards,
R.Srinivasan

Business Transaction Profile - Error when using Z-Transaction Type

Dear Experts,
we are using SAP CRM 7.0 (Support Level 0007 - SAPKU70007). I have created a Z-Business Transaction Profile Z_IC_SERVICE.
SAP Help says:
Enter the transaction type to be used as a default in your scenario in the IC WebClient. For example, choose the transaction type 0010 (Interaction Record) if an interaction record is to be created automatically. The system creates this interaction record automatically after the interaction has started (for example, after accepting a call). During this, the activity clipboard in the interaction record is filled with the relevant data.
So when I am using the transaction type 0010 (Interaction Record) in my Business Transaction Profile all is OK that means I can search for accounts and I can confirm them to go on with the process.
BUT: When I entering here a Z Transaction Type (Z000) the systems shows the errors:
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event InteractionStarted.
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event BPConfirmed.
Then I have made a copy of the transaction type 0010 (Name of copy: Z010) and tried to use it in my Business Transaction Profile the system says:
Customizing settings missing. Assign partner functions to Z010
Anybody know what to do and where to avoid errors? Note 1346892 is obsolete in this case because we already have the highest Support Package Level.
Best Regards
Oliver

Hi yes you were right. In the case of both transaction type I have corrected the customizing parameters in
SPRO -> Customer Relationship Management -> Interaction Center WebClient -> Business Transaction -> Assign Partner Functions to Business Transactions
In the case of Transaction Type Z010 I had Z-Partner Functions and and that leaded to the errors:
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event InteractionStarted.
- Error occurred in class CL_ICCMP_CUCOIREC_IMPL, event BPConfirmed.
In case of the Transaction TYPE Z000 I forgot to assign the Partner Functions that is why this error appeared:
Customizing settings missing. Assign partner functions to Z010
Thread Closed

You cannot use this transaction type to post to this asset Message no. AA83

< MODERATOR: Message locked. Please post this message in the [Asset Accounting forum|SAP ERP Financials - Asset Accounting;. >
Hi,
I am settling credit values [-ve values] from WBS to Asset Under Constructions Assets during CJ88 period settlement run.
These assets belongs to Investment Measure. For few assets I am getting below error and
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class XXXXX (chart of depreciation XXXX). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
I know normally we do this way
During charging
Dr Exp A/c WBS name
Cr B.S A/c
During settlement
Cr Exp A/c WBS name
Dr AuC GL A/c
But we have situation that during settlement, we are doing reverse
ie., Cr AuC GL A/c
Dr Exp A/c WBS Name
These expenses are through POs and no downpayments. The below error taking me to down payment accounts config but we dont have down payment scenario, can any one advise, thanks
Regards,
Sridhar

Hi,
Please check the SAP note 1091728 for this.
Regards

You cannot use this transaction type to post to this asset Message no.AA834

Hi,
I am settling credit values -ve values from WBS to Asset Under Constructions Assets during CJ88 period settlement run.
These assets belongs to Investment Measure. For few assets I am getting below error and
You cannot use this transaction type to post to this asset
Message no. AA834
Diagnosis
The transaction type entered belongs to transaction type group 15. According to the specifications for this transaction type group, posting with transactions types belonging to this group are only allowed in specific asset classes (for example, asset classes for assets under construction).
The asset to which you are posting belongs to class XXXXX (chart of depreciation XXXX). You cannot post to this class using the transaction type you have entered.
Procedure
Check the asset number entered. You may want to allow posting with this transaction type group for the asset class of the asset.
I know normally we do this way
During charging
Dr Exp A/c WBS name
Cr B.S A/c
During settlement
Cr Exp A/c WBS name
Dr AuC GL A/c
But we have situation that during settlement, we are doing reverse
ie., Cr AuC GL A/c
Dr Exp A/c WBS Name
These expenses are through POs and no downpayments. The below error taking me to down payment accounts config but we dont have down payment scenario, can any one advise, thanks
Regards,
Sridhar

When you have an investment order/WBS create from there the AUC. You collect the cost on the AUC. Final you fill in the settlement rule the final asset in (from a normal asset class) and then you transfer the costs to the final asset.
In the IO or WBS should be assigened a investment profile and the asset class AUC should be set-up correct
Search on this forum for more information or read the SAP help

How to use PO message type to output 'Form' as PDF file

Dear experts,
I am working for a topic of how to use PO message type to output 'Form' as 'PDF file', and save to external file system automatically.
Any one familiar to this topic, please kindly give me some guide, thank you!
Regards,
Joyce

Hi,
Go through the program RSTXPDFT4 (Converting SAPscript (OTF) or ABAP List Spool Job to PDF), you will get some idea. Using this program you can convert spool into PDF file.
-Alpesh

How to use OMJX transaction? Need to add an additional field on MIGO item

hi guys
we need to add a new field on the MIGO screen at the item level. We are trying to explore OMJX to add custom fields.
We have used append structutre to enhance the GOITEM structure but are not clear on how to use OMJX.
ANy idea how to use the transaction OMJX.
Thanks in advance

With the Business Add-In (BAdI) MB_MIGO_BADI, you can extend the
interface of the goods movements transaction (MIGO) with additional
tabstrip controls for the detailed information (detail tabstrips) and
header information (header tabstrips). It is possible for an external
application
o to display an additional detail tabstrip with own subscreen (max. 10
   lines) in MIGO
o to display an additional header tabstrip with own subscreen (max. 3
   lines) in MIGO
The program name, screen number and tab page text can be determined
dynamically. Different screens can therefore be controlled according to
the mode (for example, change mode, display mode, goods receipt, goods
issue).
Pushbuttons
It is not possible to implement pushbuttons in the MIGO menu, but you
can, however, implement pushbuttons directly on the external subscreen.
The OK code from MIGO is forwarded to the external application so it can
react.
Cursor Control
So that the cursor stays on the same subscreen after you press Continue,
if it was positioned there before, the external application in the own
PAI must hold the cursor positioning (on the same screen 'yes'/'no'; if
'yes', on which field), to set the cursor in PBO again.
Requirements
If you use the BAdI MB_MIGO_BADI in MIGO to update customer-own data, in
addition to the material document, to the database, you should note the
following:
o The BAdI MB_MIGO_BADI is only active in transaction MIGO.
o If you post goods movements with other transactions (for example, with
   MB01, MB1C, VL02N), you must ensure that customer data is also
   updated, if necessary.
   You can do this by using the BAdI MB_DOCUMENT_BADI (Creating a
   material document) to post the goods movements with the transactions
   mentioned above.
o Note that otherwise, posting the goods movements will lead to
   inconsistencies between SAP system data (for example, in stocks,
   material documents, FI documents) and customer data.

How to use same Data Type and Length for two fields

How to use same data type and length for two fields when using 'FOR ALL ENTRIES IN' in a select statement? For instance the select queries are :
SELECT bukrs gjahr belnr lifnr budat bldat zlspr dmbtr waers shkzg
FROM bsik
INTO TABLE it_bsik
WHERE bukrs = p_bukrs
AND lifnr IN s_lifnr.
IF it_bsik IS NOT INITIAL.
SELECT belnr gjahr awkey awtyp
FROM bkpf
INTO TABLE it_bkpf
FOR ALL ENTRIES IN it_bsik
WHERE belnr = it_bsik-belnr
AND gjahr = it_bsik-gjahr.
IF it_bkpf IS NOT INITIAL.
SELECT belnr gjahr lifnr xblnr
FROM rbkp
INTO TABLE it_rbkp
FOR ALL ENTRIES IN it_bkpf
WHERE belnr = it_bkpf-awkey+0(10)
AND gjahr = it_bkpf-awkey+10(4).
ENDIF.
ENDIF.
Here it gives an error in the 3rd select query that 'When you use the addition "FOR ALL ENTRIES IN itab", the fields "GJAHR" and "IT_BKPF2-AWKEY+10(4)" must have the same type and the same length.'
Kindly clarify.

Hi Saurabh,
Please see the example code that I have developed for you. It will help you solve the problem.
REPORT ZTEST_3 .
tables : BKPF.
data : begin of it_bkpf occurs 1,
         belnr type RE_BELNR,
         awkey type awkey,
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf.
data : begin of it_bkpf1 occurs 1,
         belnr type RE_BELNR,
         awkey type gjahr,              " change the data type
         awtyp type awtyp,
         gjahr type GJAHR,
       end of it_bkpf1.
data : begin of it_rbkp occurs 1,
         belnr type BELNR_D,
         gjahr type gjahr,
         lifnr type LIFRE,
         xblnr type XBLNR,
       end of it_rbkp.
select belnr
       awkey
       awtyp
       gjahr
       from bkpf
       into table it_bkpf
       where BUKRS = 'TELH'.
loop at it_bkpf.
it_bkpf1-belnr = it_bkpf-belnr.
it_bkpf1-awkey = it_bkpf-awkey+10(4).           "Here only append the required length.
it_bkpf1-awtyp = it_bkpf-awtyp.
it_bkpf1-gjahr = it_bkpf-gjahr.
append it_bkpf1.
clear it_bkpf1.
endloop.
select belnr
        gjahr
        lifnr
        xblnr
        from RBKP
        into table it_rbkp
        for all entries in it_bkpf1
        where belnr = it_bkpf1-belnr
This is just an example. Change the fields according to your requirement.
Regards
Abhii
Edited by: Abhii on Mar 9, 2011 9:08 AM

[svn:osmf:] 13113: Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.

Revision: 13113
Revision: 13113
Author:   [email protected]
Date:     2009-12-21 01:08:10 -0800 (Mon, 21 Dec 2009)
Log Message:
Changing to not use an embedded font by default, and adding instructions on how to use the free 'type writer' bitmap font.
Modified Paths:
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/ScrubBar.as
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/widgets/URLInput.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/fonts/Fonts.as
Removed Paths:
    osmf/trunk/libs/ChromeLibrary/assets/images/stop_up.png_1

Your site was built using tables, whose sizes are defined in your site.
If we look at your first table definition, we can see:
<table width="861" height="1449" border="3" cellpadding="0" cellspacing="0" bordercolor="#868787">
Your table has a width of 861 pixels and an overall height of 1449 pixels. Anything you put into that overall box must fit those dimensions, else
it won't be visible. Anything you add above it will push everything down. You can redefine your sizing to let you edit more inside of the table elements.
This is why, when you type in more text, things act weird. If you are in Dreamweaver, you must find the right cell to put your text into and then enter
text there. Unfortunately, this is going to push things around, which were all lined up using tables. And this gets everything offset with respect to
everything else in your website.
And that is why everyone is saying, "Start Over!"
I just inherited a website that has been put together using tables. I'm going to have to expend considerable effort in rewriting the entire design of the
website because of that. because everything I intend to add to the pages on the site is going to need to be deconstructed in order to get it to work
properly if I'm adding text and pictures that need to line up with each other.
You need something done quick and dirty and the only way I can recommend you do that is to use Dreamweaver to show you the tables you have
and put what you need in a new table that is defined above or below the tables you all ready have defined. Do that and then get back to someone here
who knows how to make a website correctly to clean up your entire website and make it editable -- which will cost you some money, but it will be
money well-spent.
I like to quote this maxim: Good, Fast, Cheap. Pick any two. This works for website design. You can get it fast and cheap, but it won't be good. I
think you may have chosen that route.

...how to use BATCHMAN transaction in Controlling?

...how to use BATCHMAN transaction in Controlling?...
need to upload statistical keyfigure values from an Excel file, but do not know which should be the header row on Excel file.
thank you.

To access the Transfer of External Data function (transaction BATCHMAN), choose:
Accounting ® Real Estate Management ® Controlling ® Actual Postings ® Transfer of External Data.
For further information please check the following link:
http://help.sap.com/saphelp_erp2005/helpdata/en/32/e7ee431feb6d45957a83e0179cbbff/frameset.htm
regards,
Lily

I Don't know how to use SBO Transaction Notification procedure

Hi all
I don't know how to use SBO Transaction Notification procedure
can any body give me description why we use,where we use,how we use some example
Awaiting soon reply
Rajkumar G.

example is for testing, if on delivery is filled ref no of vendor or not
if @object_type = '20' and (@transaction_type= 'A' or @transaction_type= 'U')
begin
     if 1 = (select count(docentry) from opdn with(nolock) where docentry =@list_of_cols_val_tab_del and (numatcard is null or len(numatcard) = 0) )
     begin
          select @error =1
          select @error_message = 'vendor ref no isnt filled'
     end
end
next example is for creating BP as vendor and testing, if dont begin for specific sign
if @object_type = '2' and @transaction_type= 'A'
begin
if left(@list_of_cols_val_tab_del, 1) = N'x' or left(@list_of_cols_val_tab_del, 1) = N'X'
     begin
          if 1 = (select count(cardcode) from ocrd where cardcode = @list_of_cols_val_tab_del and cardtype in ('S', N'S') )
               begin
     select @error =1
          select @error_message = 'Vendor code cannot begin to X sign.'
end
     end
end
is it clear?

How to use multiple transactions

hi experts,
1.how to handle multiple transactions in call transaction and session method.
2.is it possible to handle multiple transactions in call transaction method.
3.can plz send how handle multiple transactions in session method.
thanks in addvance

hi,
Go through this program.
REPORT zra_gl_cr NO STANDARD PAGE HEADING LINE-SIZE 255.
TYPE-POOLS: truxs.
DATA: it_raw TYPE truxs_t_text_data.
DATA:messtab1 LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
DATA:messtab LIKE bdcmsgcoll OCCURS 0 WITH HEADER LINE.
DATA: bdcdata LIKE bdcdata OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF i_mess OCCURS 0,
l_mstring(480),
msgnr(5),
msgv1(15),
END OF i_mess.
DATA:i_mess1 LIKE i_mess OCCURS 0 WITH HEADER LINE.
DATA: l_mstring(480),l_mstring1(480).
DATA: BEGIN OF it_itab OCCURS 0,
saknr(10), "G/L a/c number.
bukrs(4), "Company Code.
ktoks(4), "G/L a/c group.
xplacct(1), "P&L statement account.
xbilk(1), "Balance sheet account.
txt20_ml(20), "G/L a/c short text.
txt50_ml(50), "G/L a/c long text.
waers(5), "Account currency.
MWSKZ(2),
mitkz(1), "Reconciliation a/c for a/c type.
xopvw(1), "Open item management
xkres(1), "Line item display.
zuawa(3), "Sort Key.
fstag(4), "Field status group.
xintb(1), "Post automatically only.
hbkid(5), "House bank.
hktid(5), "Account id.
vzskz(2), "Interest indicator
END OF it_itab.
DATA: hdate LIKE sy-datum.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 5(15) text-103. " FOR FIELD P_FILE1.
SELECTION-SCREEN POSITION 25.
PARAMETERS : p_file1 LIKE rlgrap-filename.
SELECTION-SCREEN END OF LINE.
INITIALIZATION.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file1.
Perform file_selection will help to select the location of the file
PERFORM file_selection.
START-OF-SELECTION.
Perform data_upload will help to upload the data from the flat file
to the internal table.
PERFORM data_upload.
PERFORM open_group.
Peform bdc_upload will help to upload the data from the internal
table into its respective fields.
PERFORM bdc_fspo.
PERFORM bdc_upload.
PERFORM exp_log.
PERFORM close_group.
Perform display_log will prepare a log for the data that has been
uploaded
PERFORM display_log.
END-OF-SELECTION.
FORM file_selection .
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
def_filename = ' '
def_path = 'C:\'
mask = ',.txt,.xls.'
mode = 'O'
title = 'Open a excel file'
IMPORTING
filename = p_file1
EXCEPTIONS
inv_winsys = 1
no_batch = 2
selection_cancel = 3
selection_error = 4
OTHERS = 5.
ENDFORM. " file_selection
FORM data_upload .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = p_file1
TABLES
i_tab_converted_data = it_itab
EXCEPTIONS
conversion_failed = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " data_upload
FORM bdc_upload .
LOOP AT it_itab.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=ACC_CRE'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_KEY-SAKNR'.
perform bdc_field using 'GLACCOUNT_SCREEN_KEY-SAKNR'
it_itab-SAKNR.
perform bdc_field using 'GLACCOUNT_SCREEN_KEY-BUKRS'
it_itab-BUKRS.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=2102_GROUP'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-XPLACCT.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=2102_BS_PL'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-XBILK'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-XPLACCT.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-XBILK.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=ENTER'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-XBILK.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT20_ML'
it_itab-TXT20_ML.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT50_ML'
it_itab-TXT50_ML.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-BILKT'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'
it_itab-saknr.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=TAB02'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-ktoks.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'
it_itab-txt20_ml.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'
it_itab-txt50_ml.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-BILKT'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'
it_itab-saknr.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=TAB02'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-KTOKS.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-XBILK.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT20_ML'
it_itab-TXT20_ML.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-TXT50_ML'
it_itab-TXT50_ML.
perform bdc_field using 'GLACCOUNT_SCREEN_COA-BILKT'
it_itab-saknr.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=ENTER'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-WAERS'
it_itab-waers.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MWSKZ'
it_itab-MWSKZ.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MITKZ'
it_itab-mitkz.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-XOPVW'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XOPVW'
it_itab-XOPVW.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-XKRES'
it_itab-XKRES.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
it_itab-ZUAWA.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-xplacct.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-xbilk.
IF it_itab-xbilk = 'X'.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=TAB03'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-WAERS'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-WAERS'
it_itab-waers.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XOPVW'
it_itab-xopvw.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-MITKZ'
it_itab-mitkz.
ENDIF.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XKRES'
it_itab-xkres.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
it_itab-zuawa.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-FSTAG'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-FSTAG'
it_itab-fstag.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-XINTB'
it_itab-xintb.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-HBKID'
it_itab-hbkid.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-HKTID'
it_itab-hktid.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_CCODE-VZSKZ'
it_itab-vzskz.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=TAB03'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-WAERS'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-WAERS'
it_itab-WAERS.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MWSKZ'
it_itab-MWSKZ.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-MITKZ'
it_itab-MITKZ.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-ZUAWA'
it_itab-ZUAWA.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=ENTER'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-FSTAG'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'
it_itab-FSTAG.
perform bdc_dynpro using 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
perform bdc_field using 'BDC_OKCODE'
'=SAVE'.
perform bdc_field using 'BDC_CURSOR'
'GLACCOUNT_SCREEN_CCODE-FSTAG'.
perform bdc_field using 'GLACCOUNT_SCREEN_CCODE-FSTAG'
it_itab-FSTAG.
PERFORM bdc_transaction USING 'FS00'.
CALL TRANSACTION 'FS00' USING bdcdata MODE 'A'
UPDATE 'S'
MESSAGES INTO messtab1.
PERFORM mess1.
REFRESH bdcdata[].
ENDLOOP.
ENDFORM. " bdc_upload
FORM bdc_fspo .
LOOP AT it_itab.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ACC_CRE'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_KEY-SAKNR'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_KEY-SAKNR'
it_itab-saknr.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_KEY-KTOPL'
'1000'.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=2102_GROUP'.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-KTOKS'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-ktoks.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-xplacct.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XBILK'
it_itab-xbilk.
PERFORM bdc_dynpro USING 'SAPLGL_ACCOUNT_MASTER_MAINTAIN' '2001'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=SAVE'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-KTOKS'
it_itab-ktoks.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-XPLACCT'
it_itab-xplacct.
PERFORM bdc_field USING 'BDC_CURSOR'
'GLACCOUNT_SCREEN_COA-TXT50_ML'.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT20_ML'
it_itab-txt20_ml.
PERFORM bdc_field USING 'GLACCOUNT_SCREEN_COA-TXT50_ML'
it_itab-txt50_ml.
*perform bdc_transaction using 'FSP0'.
CALL TRANSACTION 'FSP0' USING bdcdata MODE 'A'
UPDATE 'S'
MESSAGES INTO messtab.
PERFORM mess.
REFRESH bdcdata[].
ENDLOOP.
ENDFORM. " bdc_fspo
FORM mess . "fsp0
LOOP AT messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = messtab-msgid
lang = messtab-msgspra
no = messtab-msgnr
v1 = messtab-msgv1
v2 = messtab-msgv2
v3 = messtab-msgv3
v4 = messtab-msgv4
IMPORTING
msg = l_mstring
EXCEPTIONS
not_found = 1
OTHERS = 2.
CONDENSE l_mstring.
i_mess1-l_mstring = l_mstring(250).
i_mess1-msgnr = messtab1-msgnr.
i_mess1-msgv1 = messtab1-msgv1.
APPEND i_mess1.
ENDLOOP.
ENDFORM. " mess
FORM mess1 . "fs00
LOOP AT messtab1.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = messtab1-msgid
lang = messtab1-msgspra
no = messtab1-msgnr
v1 = messtab1-msgv1
v2 = messtab1-msgv2
v3 = messtab1-msgv3
v4 = messtab1-msgv4
IMPORTING
msg = l_mstring1
EXCEPTIONS
not_found = 1
OTHERS = 2.
CONDENSE l_mstring1.
i_mess-l_mstring = l_mstring1(250).
i_mess-msgnr = messtab1-msgnr.
i_mess-msgv1 = messtab1-msgv1.
APPEND i_mess.
ENDLOOP.
ENDFORM. " mess1
FORM exp_log .
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:\temp\error_fsp0.txt'
filetype = 'DAT'
TABLES
data_tab = i_mess1.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = 'c:\temp\error_fs00.txt'
filetype = 'DAT'
TABLES
data_tab = i_mess.
ENDFORM. " exp_log
FORM bdc_dynpro USING program dynpro.
CLEAR bdcdata.
bdcdata-program = program.
bdcdata-dynpro = dynpro.
bdcdata-dynbegin = 'X'.
APPEND bdcdata.
ENDFORM. "BDC_DYNPRO
FORM bdc_field USING fnam fval.
CLEAR bdcdata.
bdcdata-fnam = fnam.
bdcdata-fval = fval.
APPEND bdcdata.
ENDFORM. "BDC_Field
Rewards points.
Rgds,
P.Nag

How to determine the transaction type?

Hello,
I have a requirement to disable the user when the role string field on the usr form is empty. I set up a post update entity adapter to do that and it works fine.
When I want to enable the user using the Enable button, the above post update entity adapter detects that the role string field is empty and the user is Active, it disables the user right back.
So, I need to set up a pre-update entity adapter that can detect the type of transaction. If the transaction is to Enable the Xellerate User, then I will update the role string to a dummy value (as long as it's not empty) so that the Disable adapter doesn't get fired.
Is this possible to do? Where can I find the transaction type information for a given Object?
Thanks
Khanh

Thanks
This is the information that i got :
java version "1.4.2_07"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_07
Java HotSpot(TM) Client VM (build 1.4.2_07-b05, mixed mode)
from this i could make out that the jvm is client version,, but how do i determine which vendor has provided the jvm .

How to use ZSLFN transaction type

Similar Messages

Maybe you are looking for