How to validate Submit action on offline adobe for using GP

Hi,
I have the following requirement.
-- An offline form is sent to different users and when they fill the form and Click on Submit, the data should be saved to SAP.
-- When the data is submitted, it should recognize the user and multiple clicks if any so that data is not duplicated
I have used Guided Procedures for this. I have created an Interactive Form callable object with an xdp template and "Create offline Interactive form and send by e-mail" option.
Problem:
1. The document emailed to user can be submitted only once. My requirement is whenever form is submitted it should update the previous data.
2. How to save this data to SAP?
Version:
SAP NW SP12
Adobe Live cycle designer 7.1
I have gone through various blogs on Adobe Offline interactive forms and GP but I could not get a solution for this. Please help.
Thank you,
Vas
Edited by: Vasu Mullapudi on Feb 13, 2008 1:54 AM

Hi,
IMHO there is no easy solution for your requirement. However there is a workaround: you can create so-called "impersonalized" forms. They can be sent or returned as many times as needed from same or different users. However the effect will be that for each form sent out and accepted by GP, GP will start a new GP process. That means that the forms are the first step of such a process - so to say.
An offline form "in the middle" of a process can be embedded into the process as a dedicated step only. Once this form is returned to GP by the user, the process is continued and 2nd or later form returns are ignored. However there is the possibility to build an additional step into GP to check the input data and if they aren't valid to send out the form to the user once again.
So you see that there are some possibilities but no straight forward solution for your needs. Hope I could help anyhow.
Regards,
Jan

Similar Messages

Offline adobe forms using webservices-how to print table data

HI,
i have created offline adobe form using webservices which call rfc to pull the data ...to get inspection lot details ...
iam getting header data....but iam not able to get multiple line items of the table data ..here in scenario there are 4 line items but only 1 line item is getting displayed in the form...
is there any need to handle seperately to display tables data in offline adobe forms if we call from webservices
Tousif
Moderator message: please have a look in the dedicated forum for "Adobe Interactive Forms".
Edited by: Thomas Zloch on Jan 18, 2011 3:08 PM
<< Moderator message - New question asked, so this is locked >>
Edited by: Rob Burbank on Jan 18, 2011 10:19 AM

This is oofline adobe form which is created throgh webservices
Edited by: tousif_ig on Jan 18, 2011 3:19 PM

How to validate an attribute in a table/EO using a DB Table

I have an attribute LocationId in DuplicateLocationEO(LocationId,LocationName)
And I need a validation on this so that user can enter a LocationId that exists in LOCATION_ID of HR.LOCATIONS table
How to validate an attribute in a table/EO using a DB Table?

Issue: Insert a value into an attribute if it is valid, Like it is available in another table.
Scenario: Insert a Location into a DuplicateLocationEO based on LocationEO.
Solution: Create a Entity Validator on LocationId of DuplicateLocationEO that is list based on query of LocationEO’s LocationId.
Note: if the validation is created at attribute level, then it leads to NPE or Undesirable results.
Procedure Steps:
Step#01: Open desired Entity Object “DuplicateLocationEO”, Go to “Overview” tab & “Business Rules” finger tab.
Step#02: Select “Entity Validators” & Click “+”
Step#03: Set the following Rule Definition Tab:
•     Select Rule Type as “List”
•     Attribute “LocationId”
•     Operator “In”
•     List Type “Query Result”
•     Enter SQL Statement “Select LOCATION_ID FROM LOCATIONS”
Step#04: Now go to “Failure Handling” tab & Select radio button for “Error”.
Step#05: Click the Magnifier link to create a message.
Step#06: In the “Select Text Resource” popup. Provide the following
•     Display Value: “Invalid LocationId: {LocationId}. Please enter a valid Location”
•     Key: INVALID_LOC
•     Description: message when user enters an invalid location.
Step#07: Click “Save and Select” Button
Step#08: Click “OK” Button
Reference:
DuplicateLocationEO DDL Script:
CREATE TABLE "HR"."TEST_LOC"
(     "LOCATION_ID" NUMBER NOT NULL ENABLE,
     "LOCATION_NAME" VARCHAR2(50 BYTE) NOT NULL ENABLE,
     CONSTRAINT "TEST_LOC_PK" PRIMARY KEY ("LOCATION_ID")
USING INDEX PCTFREE 10 INITRANS 2 MAXTRANS 255
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ENABLE
) PCTFREE 10 PCTUSED 40 INITRANS 1 MAXTRANS 255 NOCOMPRESS LOGGING
STORAGE(INITIAL 65536 NEXT 1048576 MINEXTENTS 1 MAXEXTENTS 2147483645
PCTINCREASE 0 FREELISTS 1 FREELIST GROUPS 1 BUFFER_POOL DEFAULT)
TABLESPACE "USERS" ;
To Populate Rows:
Insert into TEST_LOC select Location_id, city from LOCATIONS

How do you undo highlighted text in adobe for iPad?

How do you undo highlighted text in adobe for iPad?

Touch and hold the highlight that you added until the menu pops up and select "Clear".

How do i end my subscription with adobe for the month

how do i end my subscription with adobe for the month

Hi,
To end up your subscription contact our chat support:
Contact Customer Care
Regards,
Florence

How do I export v-card formatted files for use with either Numbers or Excel?

How do I export v-card formatted files for use with either Numbers or Excel?

Did you open Automator and just look around?
Actions are listed in the left pane.
You drag them into the workflow on the right in the order you need to process the items that you want.
If this is a on-off requirement, just make a Workflow. If you plan to use it often, make it an Application.
If you want to select the contacts you want to export, use a get Selected action. You'd then select the contacts in Contacts App before running the workflow.
I'm not on a Mac to take screenshots, so you'll have to look at Automator's help or google for more info.

How do i format an external hard drive for use on both windows and mac book air?

how do i format an external hard drive for use on both windows pc and mac book air?

Use exFAT on the PC.
(71374)

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

I currently have a D-Link DI-604 broadband router with windows computers. How can I add wifi to the network for use with ipad? Can I use AirPort Express?

Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

How do I set up an Apple Account for use in UK from Australia

How do I set up an Apple Account for use in UK from Australia ?

You need a UK bank and a UK billing address.

How much effort in developing an offline adobe interactive form - crm 2007

We have a requirement to develop an offline adobe interactive form in crm 2007 sp4. The form will be linked with a visit transaction and when saved will also facilittae the transfer of the form from crm to outlook via groupware integration. From what i can see we have the following steps which will need to be implemented.
1 - Develop web service to pull information from the created visit to the Offline Adobe Interactive Form
2 - Create an Adobe interactive Form template to hold the details of the visit
3 - Set up Groupware Integration to pass the form from CRM to Outook (DONE)
4 - Develop some approach for uploading the form data back to the CRM server (of which there appears to be three approaches - Submit by Email / WebServices / WebDynpro-Upload )
The form itself is not going to be too detailed. It will be prepopulated with the following fields:
Account No, Account Name, Contact, Date, Time, Transaction No, Transaction Category. It will also have a number of text fields which will be used to capture the details of the visit. It will have a submit button to allow for the data to be uploaded by the appropriate upload method.
Can anyone give me some guidance as to how long it would take to implement such a requirement.
Thanks in advance
Eddie

Hi,
Do review this Thread, I think this will help you.
[Adobe Interactive Forms / Web Services - Connection query|Adobe Interactive Forms / Web Services - Connection query;
Regards
Pradeep Goli

How to make submit action programatically ?

hi all ;
how can i make submit action programatically (by clicking on any item in the page) ?
Regards .

Hi,
set autosubmit on the input components to true
Frank

How do I submit a bug to microsoft for TEE

I'm not sure but I think I may have found a bug in TEE on Linux. The
question on stackoverflow was answered but I've just run into the same problem when trying to merge our trunk to my branch. In short, the root of the problem is that was a directory named
Directory. Over the course of time, our naming conventions changed and this directory became named
directory (the case change). Interestingly, two files (a *.cpp and *.h) somehow were still associated with the first directory name though the directory named was changed and preserved the new case. The problems should be apparent for Linux
users.
Now, as the link I provided mentions, I did try to fix this by using the tf rename command, but after the command was executed to rename the first file, I could do nothing more using TEE because of this error:
java.io.FileNotFoundException: /home/andy/devel/project/directory/code.cpp (No such file or directory). Ok, I just moved on. A coworker executed the very same command from a Visual Studio Command Prompt and it worked and he was
able to check in the named files. "Great," I thought, I'll merge with main and continue. I did so using the
tf merge -recursive <source_branch> <dest_branch> and promptly ran into the same problem when trying to do
tf status and any other tf command.
It seems that there might be a bug in how metadata is handled in this case when using TEE in Linux. How can I submit this to Microsoft?

http://www.apple.com/feedback/itunesapp.html
https://discussions.apple.com/thread/4553482 - "Many albums' artwork doesn't display in my Library. However once I pull up the info window for one track, and return to the album list, the artwork magically appears."
"...some album covers were missing in album view. Apple says this is a rare bug, but one it has solved and will fix in a minor update soon." - http://allthingsd.com/20121204/itunes-gets-an-upgrade-without-missing-a-beat/

How does one install non-English character sets for use with the "find" function in Acrabat Pro 11?

I have pdf files in European languages and want to be able to enter non-English characters in the "find" function. How does one install other character sets for use with Acrobat Pro XI?

Have you tried applying the update by going to Help>Updates within Photoshop Lightroom? The update should be using the same licensing? Did you perhaps customize the installation location? Finally which operating system are you using?

How to make text document more interesting quickly for use via the web?

what Adobe applications are the best for making a .pdf text document more interesting (quickly) for use via the web?

<moved from Adobe Creative Cloud to Creating, Editing & Exporting PDFs - kglad>
people here can better help you.

Offline Adobe Form using GP - How to save data to SAP

Hi,
I have the following requirement.
          o An offline form is sent to different users and when they fill the form and Click on Submit, the data should be saved to SAP.
          o When the data is submitted, it should be recognize the user and multiple clicks if any so that data is not duplicated
I have used Guided Procedures for this. I have created an Interactive Form callable object with an xdp template and "Create offline Interactive form and send by e-mail" option.
Problem:
1. The document emailed to user can be submitted only once. My requirement is whenever form is submitted it should update the previous data.
2. How to save this data to SAP?
Version:
SAP NW SP12
Adobe Live cycle designer 7.1
I have gone through various blogs on Adobe Offline interactive forms and GP but I could not get a solution for this. Please help.
Thank you,
Vasu

Hi,
IMHO there is no easy solution for your requirement. However there is a workaround: you can create so-called "impersonalized" forms. They can be sent or returned as many times as needed from same or different users. However the effect will be that for each form sent out and accepted by GP, GP will start a new GP process. That means that the forms are the first step of such a process - so to say.
An offline form "in the middle" of a process can be embedded into the process as a dedicated step only. Once this form is returned to GP by the user, the process is continued and 2nd or later form returns are ignored. However there is the possibility to build an additional step into GP to check the input data and if they aren't valid to send out the form to the user once again.
So you see that there are some possibilities but no straight forward solution for your needs. Hope I could help anyhow.
Regards,
    Jan

How to validate Submit action on offline adobe for using GP

Similar Messages

Maybe you are looking for