How to verify the Time Machine restore?

Completed the TM restore, verified disk and permissions (fixed some permissions) but the machine will not boot - apple logo and spinning wheel sit there forever.
I a able to boot in Single User Mode - and boot from CD and in both cases see all the files restored
How can I see the boot log to see where Leopard 10.5.7 is getting stuck?
Is there a way to validate the files needed for booting the OS?
(the restore was a result of getting a corrupted file system that I was not able to fix)
Thanks for any advice

Answer to the boot log - is the system.log in /var/log or boot up in verbose mode with Cmd-v pressed.
having said that I am getting this error
com.apple.launchd (com.apple.ATSServer) posix_spawnp("/System/Library/Frameworks/ApplicationServices.framework/Framewor ks/ATS.framework/Support/ATSServer",...) No such file or directory
com.apple.launchd (com.apple.WindowServer) posix_spawnp("/System/Library/Frameworks/ApplicationServices.framework/Framewor ks/CoreGraphics.framework/Resources/WindowServer",...) No such file or directory
so some resource files not properly restored - will look to see why they didn't restore - any ideas in the meantie welcom

Similar Messages

How to use the time machine?

how to use the time machine? because i don't know where to find the back up. can you please help me.. thankyou.

Time machine is a backup application and service that come with Leopard. When you plug in an external drive you can use it as a backup source. All you do is select the drive in the Time Machine control panel and start the backup. It will back up your whole drive and if you lose a file, go to the location on your drive where that file should be and open the Time Machine application. From there you will be able to migrate to all the points in "time" when the file was changed, and select the version of the file that you want. Then select "restore" and the file will be restored to the location where it last was on your drive.
For more information check out the Time Machine website:http://www.apple.com/macosx/features/timemachine.html

Time machine corrupted sparsebundle? how to repair? time machine restore not working

On my macbook pro, after starting with Cmd-R, I erased the hard disk, re-installed Mavericks and I want to restore my back up with Time Machine. I select the NAS where the backup is, it sees the backup file but it says: "There is a problem with this backup and it can't be restored". I also copied the backup file (with extension sparsebundle) to another external hard disk and tried to use it from there but I have the same problem. With my iMac (as the laptop is not usable since I started it with cmd-R), when I double click on the backup file (ext sparsebundle), it mounts and I can actually see and access the files that are there. I do not understand why the restore is not working with the Time Machine. It seems the sparsebundle is corrupted. I tried these instructions: http://www.garth.org/archives/2011,08,27,169,fix-time-machine-sparsebundle-nas-b ased-backup-errors.html
But I am stuck at this step: tail -f /var/log/fsck_hfs.log
iMac-6:~ root# tail -f /var/log/fsck_hfs.log
/dev/rdisk3s2: ** Checking Journaled HFS Plus volume.
/dev/rdisk3s2: ** Detected a case-sensitive volume.
/dev/rdisk3s2: The volume name is Time Machine Backups
/dev/rdisk3s2: ** Checking extents overflow file.
/dev/rdisk3s2: ** Checking catalog file.
/dev/rdisk3s2: Invalid key length
/dev/rdisk3s2: (4, 57529)
/dev/rdisk3s2: ** The volume Time Machine Backups could not be verified completely.
Nothing seems to happen even after a few hours (like 3 hours). The sparsebundle bakcup file is about 200 GB big. It does not seem to do anything as I do not notice any disk activity.
Could someone please advise how to do the restore with the Time Machine or how I can repair the backup file?

Well, if Time Machine is the only thing on that hard drive and there is only one partition, sooner or later, Time Machine will fill up the entire thing and you can't use it for anything else.
Now, you can start over, but that will mean that your Time machine backups will be wiped out. If that is what you want, it is a rather easy process easily accomplished in Disk Utility:
With hard drive connected, open Disk Utility (Applications -> Utilities). Highlight the Time Machine hard drive (the top entry for it). Click on the Partition tab. In the window, pick 2 partitions under the "volume scheme" and then slide the little thing at the bottom to adjust the size of each partition. Make sure the format is Mac OS Extended (Journaled) and, under options, click the GUID partition scheme. Name each one (i.e. "Time Machine" and "backups") and click "apply". Disk Utility will first erase the drive and then create 2 partitions (2 totally separate drives so to speak). You're done.....
You can then set up the one for Time Machine and the other to drag over whatever files you want.

How come that the time machine backup takes 5 days to sync 200 GB over the ethernet?

I'm really not happy with the backup speed of the time machine. it has been 1 day and half that it is syncing and for now just 36GB are done of 210GB.
The remaining time estimation is ridiculous around 5 more days?
How come this is possible?? I cannot move my mac pro anywhere else it needs to be plug-in 24/7 to the Ethernet and power, of course hoping that everything goes already during these 5 days to backup.
I've tried different things, I've check my disk for issues also for permission issues none existed.
I've tried to restart the backup from scratch, even some times it start fast it slows down to a very low transfer rate, and now the current rate of transfer is around 1KB or lower :S
The soul purpose of the time capsule is to do backups but at this speed rate it's useless, and from what I saw it happens to other people.
I must have being doing something very wrong, can anyone help me or give me suggestions?
Regards
P.S. Mac pro 13'' early 2011 with 8 GB, Mac OX 10.7.5

The latest update to Lion.. 10.7.5 added slowness of TM as a new feature.. (There are no bugs just features).
Until Apple sort out their beta testing I would recommend a different backup software. CCC, SuperDuper, Chronosync.
The issue from reading the various posts is affecting everyone.. including people using external drives.
Welcome to the new Apple beta program.

I was unable to access migrate assistant to reinstall my hard drive. I didn't know if it would work but I used the time machine restore button that opens up in the space movie. The computer said it would download it to "Volumes". Now I can't find it.

I was unable to access migrate assistant to restore my hard drive. Out of desperation and ignorance I opened up Time Machines space page and selected my most recent backup and pushed restore. The system accepted it and said it would intall in in "volumes". I was unable to figure out what that meant but I went a head a tried it. The download took four hours and then puff it was gone and so was my data. I can't find the back up anywhere. The only thing I think it might be is that I had named the hard drive a different name than the original (don't ask me why). Have any ideas?

Choose Go to Folder from the Finder's Go menu and provide /Volumes/ as the path.
(71792)

HT201250 Will the Time Machine restore lost SMTP server password?

Lost SMTP password.... will using time machine reset old password and allow me to use email server again?
I can backup all new files on ext. drives

It won't. Time Machine doesn't interact with the EFI hardware (the successor to the BIOS, if that helps), which is where Firmware Passwords are set up.
HTH.

How to disable the Time Machine prompt

Even when Time Machine is turned off every time our students access firewire drives, they will be prompted by TM to backup. This will be confusing and inconvenient for everyone. Anyone have a solution?
Thanks.

This is a guess... I have not tested the following but seems like it should do the trick. Please post back to confirm:
Open /System/Library/LaunchDaemons/com.apple.backupd-attach.plist in the Property List Editor. Expand the Root arrow and there is a property named 'StartOnMount'. Set this to No, Save and (probably) restart. The TM dialog should not pop up after this on a disk attach.

Will a system restore from Time Machine erase any of the data that is currently on the Mac and not in the Time Machine?

We had a lot of data on our Mac (i.e. photos, iTunes libraries etc) which we backed up via Time Machine. The hard disk corrupted so we had to get it wiped. When we got it back, my parents started using the mac as per usual but they didn't do a full System Restore from Time Machine. So, if I do a full restore now, will it erase any of the new photos, musc etc that is currently on the mac?

The Time Machine restore will only restore what is on Time Machine. Making a clone is probably a better means of ensuring whatever data you want recovered gets recovered together with Time Machine.
Generally speaking, applications that are newer than the operating system from Apple that are included with the operating system are not supported. So in your data recovery process from your clone, you'll have to be careful what data you choose to copy back.

Time machine restore help

I've recently been having issues with my early 2008 black Macbook. I ran the apple HW diagnostics and determined it is a bad hard drive. I went out and bought a new 500GB SATA HD, and attempted to restore my system using a Time Machine backup. I booted into the Leopard Disc that came with my computer, formatted the drive, and ran the Time machine restore. Everything appeared to go fine (took about 2 hours, no error messages). However, after the machine rebooted and attempted to boot into OSX an error similar to this popped up. http://img149.imageshack.us/img149/7792/pict0017lo8.jpg
Any thoughts as to why this is happening? I don't really want to start over with a clean install, that's why I have Time Machine!
Other information:
My computer originally had Leopard, and was upgraded to Snow Leopard.
I have boot camp setup on my mac for Win 7. (I know this isn't backed up or restored as part of a time machine backup, which I'm O.K. with.)
Thanks in advance for all your help.

Any number of possibilities. First, did you prep the drive properly:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs) then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
Any brand new drive should be setup per the above because they usually are configured for use on PCs rather than Macs.
Second, depends on how you went about the process of restoring your system. Select Mac Help from the Finder's Help menu and search for "time machine." Look for an article specifically about performing a full system restore. Also, see User Tips for Time Machine for help with TM problems. Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM. See also Mac 101- Time Machine.
What you saw was a kernel panic screen. Panics at startup may be indicative of a hardware problem. You might give this a try:
How to run hardware diagnostics for an Intel Mac
Boot from your original OS X Installer Disc One that came with your computer. After the chime press and hold down the "D" key until the diagnostic screen appears. Run the extended tests for a minimum of two or three hours. If any error messages appear note them down as you will need to report them to the service tech when you take the computer in for repair.
Some "common" error indicators:
SNS - sensor error
MEM - memory error
HDD - hard disk drive error
MOT - fan error
To assure the problem isn't with your backup you might consider installing OS X by itself. If all is OK, then you can complete the TM restore using Migration Assistant.

Time Machine restore fails from Snow Leo disc. iMac 24" 2007

My hard drive sufferd some kind of crash yesterday. I booted to the SL-disc and formatted the drive. I then verified it with no errors before formatting again - this time I told it to write 0´s. The drive verifies fine in disk utility. I go into the Time Machine restore dialogue and selects the latest recovery point and it goes to work and I go to bed. Wake up the error "the OS X install could not be completed" or something like that only in norwegian. I try again with an earlier recovery point, but after a few hours it displays the same message.
The only weird thing about my setup is that the TM drive is connected through my firewire audio interface. I am at work now and came to think of this little weirdness. Can this be the problem? I seem to remember having recovered before without this causing a problem. Any other suggestions? Is my drive really troubled even though it reports no problems after the format?

It's hard to tell, but just to be safe, I'd connect the drive directly.
It might have been damaged by the crash; you might also want to repair it, per #A5 in Time Machine - Troubleshooting.
When you do the restore, select Window, then Show Log and Show All logs from the menubar. These selections may require several seconds to take effect, but you can tell how far the process has gotten.
If the restore seems to get most of the way, but fails again, see if it will start up. If not, try installing a fresh copy of OSX. See what didn't get copied; you may be able to recover the missing stuff by restoring it selectively.

Changing the Time machine intervals

I am running OS 10.5 Server on a dual g4 XServe. Adding time machine to the mix of obligations seems to be interfering with some of the more mission critical activities.
Is it possible to change the interval from hourly to daily as the "first" back up time? If so, How?

maurocam wrote:
plus that, for how long does the time machine keeps the oldest back up file?? is it possible to change those intervals in general?
TM will keep your oldest backup as long as there's room on the TM disk/partition.
Regardless of space, however, it does periodically "thin" expired backups, according to the schedule on the TM Preference panel. It keeps one backup per week as long as there's room; one per day (the first) for a month; all others for 24 hours. You cannot alter this schedule.
You might want to review these:
Time Machine Tutorial
Time Machine 101
How to back up and restore your files
Time Machine Features
Apple - Support - Mac OSX v10.5 Leopard Time Machine
and perhaps browse the Time Machine - Frequently Asked Questions *User Tip* at the top of this forum.

Time Machine Restore with downloaded Lion 10.7

Hello,
I have a laundry list of questions, I hope you answer one for me, thanks.
My system disk has version 10.6.2 , and I'm pretty sure when I booted from this disk,
it presented a large icon saying it was 10.7, is this true or imagination?
Anyway, I had some sort of virus or other problem that forced the imac to keep
flashing the restore window modal panel, I couldn't resolve it by clicking on anything,
so I did a restore from a month old backup.
Questions
It restored the system to 10.7, because that's what the backup copy was. But,
booting from the disk and following through the prompts, it was asking if I wanted
to continue and instal version 10.7, (from my original system disk), how is this
possible? Or rather, this confused me, because I didn't have any idea what version
number coresponded to the latest Lion(10.7)
So I opted to do the Time Machine restore.
So, did I have to use time machine, or could I have continued with the system disk instal,
and gotten the latest version 10.7, AND not lost all my files since this last backup?
I lost some files, and I don't think I would have needed too.
So far it looks like all my software has been restored, and everything Mac seems to be working.
Parallels isn't quite working yet, but it looks close.
Thanks again for any info.
Your heart really does start to beat when the computer starts getting dodgy...

How do I restore my entire system?
Regards,
Colin R.

Older MB (Core Duo [not '2']) Time Machine restore issues

The hard drive in a family-member's MacBook died and I'm trying to find the path to restoration. Regular Time Machine backups were made right up to the point of failure. I've installed a "new" drive in the MacBook (an Apple-sourced drive which formerly lived in a Mac Mini) and attempted to use the utility functions on the Snow Leopard install disk but have had no luck.
Note that this is a "Core Duo" MacBook. Not a "Core 2 Duo" machine. It cannot run Lion due to the hardware limitations enforced by Apple.
The MacBook had been updated to the latest versions of software on a regular basis. I think that the O/S version may have reached the point where the TIme Machine backups are in the "new" format where the Snow Leopard disk utilities cannot be used to restore the backup and only the Lion utilities work. (I just went through this with my MB Air.)
I have tried using a Lion install disk to run the restore but receive the "No Entry"/"Banned" symbol at boot. This makes sense as the MB is beneath the minimum hardware requirements for Lion.
When I first tried the old Mini drive in the MacBook, it booted up just fine to the Mini's condition 3 years ago. Surprising and encouraging.
I then booted from the Snow Leopard DVD and ran the Time Machine restore utility to restore the most recent backup to the newly-installed HD. All seemed to go well. The restore completed but on restart, the system hung in the gray-screen/apple-logo/spinning-gear in perpetuity. I tried restoring the second and third eldest backups with the same result.
In order to verify the health of the HD, I used the Snow Leopard disk to erase the drive. Then I installed a fresh copy of Snow Leopard. And then I patched it up to current standards.
So. Now I have a squeaky-clean new install of Snow Leopard on a MacBook (Core Duo, which cannot run Lion), a dated Snow Leopard installation DVD in hand, a solid series of dutifully-recorded Time Machine backups on a Time Capsule, and no freaking clue of where to go from here.
Everything I've read online seems to be based on the assumptions that I can a) use the older utilities on the Snow Leopard disk to install Time Machine backups made under a version of Snow Leopard compatible with the disk utility, or b) I can boot up using Lion installation media (USB or DVD pulled from the DMG in the downloaded Lion app-store installation app) and restore the "late model" Time Machine backup to the hard drive.
Has Apple just f'd me over? This computer is used by my college-student child and I would appreciate any suggestions.
A bit about me: I'm an IT professional -- a DBA -- who is by no means a Mac expert. After years of Windows machines, I returned to the Mac fold 4 years ago after a 14-year absence.
I could really use a good piece of solid advice at this point.
Thanks,
- Eric

It sounds like it's working perfectly. With Fusion I don't believe it is backed up, I know for sure Windows isn't. You may want to contact Pondini to ask about Fusion. As for your Adobe apps you can thank Adobe for that, you will need to re-install the apps, I believe this is one way Adobe ensures users aren't violating their licensing. I believe you will need to manually install the Adobe apps which shouldn't be a big deal as long as you have licensed software. Your data should have come over smoothly and frankly that's the most critical part. Reinstalling some apps should not be a problem.
I'd recommend looking over Pondini Time Machine Tips and if need be contacting Pondini directly (he has a contact section on the page) he has a lot of experience with TM and as you have already seen migrating Macs. He can provide much more information than me.

Time Machine restore to new computer

My iMac G5 has completely failed, and I am getting a new iMac Core2Duo. As the old computer is dead, I won't be able to use migration assistant to copy my stuff from the old computer. So I will need to restore my files from the Time Machine back-up.
Slightly worried because I'm moving from a PowerPC to Intel machine.
Any tips or ideas? I know I will need to go through the install DVD to initiate the restore process.
Any help would be really useful!

I was just going to make a post myself but thought perhaps I could do it as a reply to this post.
I have had the same issue and ... Time Machine doesn't work. Apple Care has been pretty much useless in solving my problem. Background: 6 month old 24' iMac, I'm doing a software update and the OS update (10.5.6) fails. System resources are corrupted so I have to do an OS reinstall. Except that doesn't work. Bad file system. Only fix is to wipe the disk and reinstall. That doesn't work, Apple replaces the hard drive "bad firmware". Hmm.. So I go to restore from Time Machine - the restore won't work either from the new install or the migration assistant. The symptom is that the Time Machine app can see the external hard drive, knows it's a time machine disk, but says no system is present. I don't get the list of folders (dates) I'm supposed to get at the various restore points. The Time Machine disk is fine. I can use the finder and see all the files and folders. I can do the painful drag and drop restore. I'll have to reinstall apps from scratch but the data is there. I've deleted the interrupted backup, deleted the "Latest" folder, done a variety of stuff Time Machine tech support has suggested. It just doesn't work. No explanation. I've got a good Time Machine backup and essentially a new machine and no-go.
What I would do is make a back up of your time machine disk. I would get another disk and do a drag and drop copy of the data you care about. Make a backup of the backup in other words. Then use the Time Machine restore function to selectively restore folders.
What I think is happening here is that despite the assertion that Time Machine is a simple incremental backup, I think that there are ties between the source and the target at the system level. In my case I had a more complex file system than usual, multiple user accounts, and probably a corrupted OS that migrated itself onto the time machine volume. I think Time Machine is looking to the system files somewhere on the Time Machine disk and if those are corrupted your Time Machine disk as a source for a full restore is useless.
I'll probably make a separate post on this so sorry in advance on that but if anyone has any ideas on how I can solve this and help the original poster Mr. Tanner avoid this, it would be great. Maybe a Time Machine system engineer is reading and can offer some help. I live in San Jose and I'm happy to bring my Mac and Time Machine disk over to Cupertino....

What happens when you interrupt a Time Machine restore.

I recently bought a new MacBook Pro. After I started the Time Machine restore, I realized it was going to take around 12 hours to complete. After about 45 min, I hit Command + W which shut down the computer. I have now decided I do not want to use the Time Machine backup at all and would like to start from scratch.
I have two questions...
1. Did interupting the restore cause any harm? Do I need to wipe the disk and start from scratch?
2. Are there 45 minutes worth of transfered restore files hidden somewhere on this machine?
Since it's a new machine I would like to start with a totally clean install and I fear that the interupted restore may have done something.
Any help would be great!
Thanks,
-Rick

Boot into Recovery by holding down the key combination command-R at the startup chime. Release the keys when you see a gray screen with a spinning dial.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with networks that require any kind of authentication other than a WPA or WPA2 Personal password.
When the Mac OS X Utilities screen appears, launch Disk Utility and erase the startup volume. Then quit Disk Utility and install the Mac OS. When you reboot, you'll be prompted to go through the initial setup process. That’s when you import the data from one of your backups. For details of how this works, see here:
Setting-up a new Mac from an old one, its backups, or a PC Using Setup Assistant on Lion

How to verify the Time Machine restore?

Similar Messages

Maybe you are looking for