How to view the Messages on the Stream Queues in the MQSeries Explorer

Hi,
After you publish the data to the stream queue (SYSTEM.BROKER.DEFAULT.STREAM), how to you see the data on that stream using the MQSeries Explorer.
I could not see any data on the stream, but I have confirmed that the messages are being published because after I register the subscriber, the published messages do get routed corectly.
Is there a way to view published messages on the stream queue. any help would be greatly appciated.
Thanks,
Rushabh

Thanks for replying..but what if there are no subscribers registered for that particular topic and the publisher keeps on publishing the messages for a topic. I suspect there should be some way of knowing for the publisher whether it published the messages on the stream queue or not and hence some way of viewing the messages on the queue via the MQSeries explorer..
Thanks,
Rushabh

Similar Messages

How to view Output Messages in the LabWindows UI?

In my LabWindows/CVI I would like to view the output messages that are sent from sequences:
"RunState.Engine.NewOutputMessage(Parameters.Message).Post()"
I thought there might be a TS UI Control like the one in the sequence editor called Output - but I can't find one.
So far I have managed to catch the message type (TS_UIMsg_OutputMessages) but I can't actually get the string from the event.
Does anyone have an example of doing this?
Thanks,
Ronnie
TestStand 4.2.1, LabVIEW 2009, LabWindows/CVI 2009

Ok, let me see if I can explain how to do it more clearly then.
1) Create a new OutputMessages collection using TS_EngineNewOutputMessages(). This collection will store your own private copy of the output messages. You can hold onto and add to this collection if you want to store them. If not you can just close the handle to free it once you are done with it.
2) When you get the UIMessage you need to get the ActiveXData property of it. I think the CVI function should be called something like TS_UIMessageGetActiveXData(). The CAObjHandle you get back from this function is a different OutputMessages object that you should NOT hold onto (because of multithreading reasons), you should instead close the handle before returning back from your UIMessage handler. Before doing that though, you should use the TS_OutputMessagesCopyMessagesToCollection method to copy the messages from this OutputMessages object to the new one you created in step 1) above (i.e. you are making your own private copy of the messages and leaving the ones in the UIMessage unchanged (again, it is for multithreading reasons that it must be done this way to avoid race conditions).
3) You now have a copy of the output messages from the event in your own private OutputMessages collection that you created in step 1) above. You can now access it to get the info for the output messages. You can get the number of items it contains (and it might contain more than one), by using the TS_OutputMessagesGetItem() function and using CA_VariantInt(index) to package the integer that you pass for the index parameter.
4) Getting the item gives you an OutputMessage object (notice no plural). You can get information about the output message using the methods and properties of the OutputMessage class (see the online help for more info). There is more to an output message than just the message text. There is also a timestamp, category, location, icon, id, severity, color, etc.
If you need more information please let us know specifically what you are having trouble with or need more information about.
Hope this helps,
-Doug

How the message appear to reciever only not the sender.

Hi Everyone,
I want to know in p2p or client server architucture ,how to view a Instant Message without adding the sender ip or Machine name , such in all IM software the sender see it's message what i need is how the message appear to reciever only not the sender.
How can i exctract the Machine name on a Lan.

OCKBA wrote:
I want to know in p2p or client server architucture ,how to view a Instant Message without adding the sender ip or Machine name ,For the server to receive a message, it has to read it from a socket. To prevent the sender seeing its own message, remember which Socket it came from and make sure it doesn't go back to that Socket.
How can i exctract the Machine name on a Lan.socket.getRemoteAddress()

When I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome the b

when I choose a photo to share on face book a drop down box appears with the message, Face book didn't recognise the information you entered for the account this is my Face book login information I use to access my face book page how can I overcome this.

Delete abd re-enter your Facebook account information jnder the accounts tab in the iPhoto preferences
You may also want to take a look at the user tip for Facebook problems
LN

The message icon is not showing in the drop screen of my photos it used to show before and now it's not there how can I get it back?

The message icon is not showing in the drop screen of my photos where it says do you want to email, message, assign, use as waller paper etc. it used to show before and now it's not there how can I get it back?

Did this back along to mine. Plug it into itunes on your pc (or Mac) and click on the ipod icon on the left hand side. When the device options come up on the main screen, click on restore. Follow the steps and it should restore to factory settings. If you had icloud activated on the ipod all previous purchases should be in the cloud and ready to download onto the ipod afte rit has been restored to factory settings, otherwise you'll have to download them all again. Hope it helped.

Topic area: Apple Mail. Question: How do I get the message preview window to display to the right of my list of email messages?

Topic area: Apple Mail. Question: How do I get the message preview window to display to the right of my list of email messages? i.e. to preview whatever message is currently highlighted in the center window list of messages?

At present there is no preference option available to move the preview
pane to right side of the mail window.
Best.

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem?

I'm getting kernel panics each day as I shut down, the message of restarting by holding down the power button appears on the screen - it began about a month ago and. Do you have any ideas of how to solve the problem? I've copied the logs that I found for each kernel panic that still have the message logged. Please help if you can, I have read some of the other comments and perhaps it has something to do with my anti-virus software being on at start up. I have copied the log here. Any advice will be welcome.
Interval Since Last Panic Report: 665204 sec
Panics Since Last Report:          8
Anonymous UUID: D6DCC90D-A5CA-4BBE-A435-3E64A512A51B
Sat May 26 07:23:05 2012
panic(cpu 3 caller 0xffffff80002b4f36): trying to interlock destroyed mutex (0xffffff801a489be0)
Backtrace (CPU 3), Frame : Return Address
0xffffff8160313b00 : 0xffffff8000220792
0xffffff8160313b80 : 0xffffff80002b4f36
0xffffff8160313b90 : 0xffffff8000227e68
0xffffff8160313bd0 : 0xffffff7f80d14250
0xffffff8160313c20 : 0xffffff7f80d14f73
0xffffff8160313cc0 : 0xffffff800059a237
0xffffff8160313d00 : 0xffffff8000586cbf
0xffffff8160313d20 : 0xffffff800057e6e3
0xffffff8160313df0 : 0xffffff800057ed06
0xffffff8160313e20 : 0xffffff8000583c52
0xffffff8160313e70 : 0xffffff8000583d05
0xffffff8160313e90 : 0xffffff80005358b4
0xffffff8160313ef0 : 0xffffff80005367c3
0xffffff8160313f30 : 0xffffff8000536897
0xffffff8160313f60 : 0xffffff80005ccfe8
0xffffff8160313fb0 : 0xffffff80002da5e9
      Kernel Extensions in backtrace:
com.intego.iokit.VBX6NKE(1.0)[211D5E46-3E43-C5DC-9C6A-8C3FFF0F4493]@0xffffff7f8 0d11000->0xffffff7f80d1bfff
dependency: com.apple.iokit.IONetworkingFamily(2.1)[2FCC16E1-34AB-3908-98BD-CCBFA56FFDCE]@0 xffffff7f809b7000
BSD process name corresponding to current thread: iStatLocalDaemon
Mac OS version:
11E53
Kernel version:
Darwin Kernel Version 11.4.0: Mon Apr 9 19:32:15 PDT 2012; root:xnu-1699.26.8~1/RELEASE_X86_64
Kernel UUID: A8ED611D-FB0F-3729-8392-E7A32C5E7D74
System model name: iMac11,2 (Mac-F2238AC8)
System uptime in nanoseconds: 69777074610
last loaded kext at 58265763561: com.intego.iokit.VBX6NKE            1 (addr 0xffffff7f80d11000, size 45056)
loaded kexts:
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Model: iMac11,2, BootROM IM112.0057.B01, 2 processors, Intel Core i3, 3.2 GHz, 12 GB, SMC 1.64f5
Graphics: ATI Radeon HD 5670, ATI Radeon HD 5670, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x802C, 0x31364A53463531323634485A2D3147344431
Memory Module: BANK 0/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
Memory Module: BANK 1/DIMM1, 2 GB, DDR3, 1333 MHz, 0x80CE, 0x4D34373142353637334648302D4348392020
AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x8F), Atheros 9280: 4.0.64.8-P2P
Bluetooth: Version 4.0.5f11, 2 service, 18 devices, 1 incoming serial ports
Serial ATA Device: ST31000528AS, 1 TB
Serial ATA Device: OPTIARC DVD RW AD-5680H
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfa100000 / 2
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa140000 / 5
USB Device: USB2.0 Hub, 0x05e3 (Genesys Logic, Inc.), 0x0606, 0xfa141000 / 9
USB Device: Apple Optical USB Mouse, apple_vendor_id, 0x0304, 0xfa141100 / 8
USB Device: CanoScan, 0x04a9 (Canon Inc.), 0x1904, 0xfa141200 / 6
USB Device: BRCM2046 Hub, 0x0a5c (Broadcom Corp.), 0x4500, 0xfa110000 / 4
USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfa120000 / 3
USB Device: hub_device, 0x0424 (SMSC), 0x2514, 0xfd100000 / 2
USB Device: HUAWEI Mobile, 0x12d1 (Huawei Technologies Co., Ltd.), 0x1001, 0xfd130000 / 5
USB Device: My Passport 070A, 0x1058 (Western Digital Technologies, Inc.), 0x070a, 0xfd140000 / 6
USB Device: Built-in iSight, apple_vendor_id, 0x8502, 0xfd110000 / 4
USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

Immediate suspects are the additions you added to you rsystem that installed kexts (drivers). From above,
com.intego.iokit.VBX6NKE            1
com.intego.iokit.BehavioralKext            1
com.intego.kext.VirusBarrier.AppBarrierKPI            10.6.8
com.intego.kext.VirusBarrierKPI            10.6.8
com.globaldelight.driver.BoomDevice            1.1
com.huawei.driver.HuaweiDataCardACMData            4.2
Two experiments you can try.
1. Boot in safe mode and see if you can shut down normally. All thise additions won't be running in safe mode so this test would indicate it is one of them causing the problem.
2. Uninstall all the intego VirusBarrier stuff. That's my first guess and the troublemaker.

I am running ver 9.0.1, but I keep getting the message that I am not running the latest version? Why? and how can I get rid of this message?

On my firefox start up screen, I get the message that I am not running the latest. It asks that I upgrade now. However, under "about firefox," I am running 9.01, the latest version. I'd like to know why I'm getting this message and how I can get rid of it.
Thank you.

Hi jerzyguitar,
You may see that message below the Google search box on www.google.com/firefox which is the old Firefox default home page. That page is no longer being maintained by Google.
You should try changing your home page to:
about:home
If you don't know how to change the home page, you should take a look at the Knowledge Base article [[How to set the home page]].
Hopefully this helps

I delete an individual message but the time I received the message is still showing next to the persons name in my inbox instead of going back into the correct date/time order. Anyone know how to fix this?

I delete an individual message but the time I received the message is still showing next to the persons name in my inbox instead of going back into the correct date/time order. Anyone know how to fix this?

SOLUTION
Open "terminal" on your mac and type the following:
defaults write com.apple.mail IgnoreSortOrderWhenSelectingAfterDelete 1
(copy and past the whole line)
This will stop that behaviour in mail.
It works on most opperating systems.
mine is.
Mac OSx 10.7.2 Lion
Cheers

So how can I use my iPhone or stream music on the ATV without having use of the computer?. I am limited I have wifi iPhone ATV and hd TV. My ATV has a setting for AirPlay as well. Please help :)

So how can I use my iPhone or stream music on the ATV without having use of the computer?. I am limited I have wifi iPhone ATV and hd TV. My ATV has a setting for AirPlay as well. Please help :)

Use AirPlay.

Kitkat upgrade is the worst ever. I hate the messaging white background. I hate the white blinking light that is so very small you cannot tell if you have messages. My phone plays music every minute. I can't find how to disable this feature. I get hundr

I hate the new KitKat upgrade. I hate the messaging white background. I hate the loss of the green blinking light in the left upper corner. I do not know why music plays whenever I get an email. I get hundreds of emails to my device and it plays music and is driving me crazy. How do I disable this? I went through all my settings and cannot find where this may be set. It's a bust if you ask me for the Android system. Booooo

An update should only improve your device performance mistygirl1209. I'm sorry to hear you don't like the aesthetics of the new OS. Although we work closely with manufacturers and OS developers, we don't produce the devices, operating systems or updates. I want to help you fix the email issue. What make and model device is this? What type of music are you referring to? What type of emails are these? Are there attachments in them?
JonathanK_VZW
VZWSupport
Follow Us on Twitter@VZWSupport

Have IMAC, Mountain Lion mail. Each time I open mail, the message Mail can't connect to the account "Google" followed by a request for a password of an acct that was previously deleted. How do I get rid of the message? Thanks

I have an IMAC, Mountain Lion. Each time I open my mail, a message box appears with the message Mail can't connect to the account "Google", followed by Enter the password for the user *****@gmail.com. The full account that appears is an account that I had previously deleted. I cannot prevent the message box from appearing. What do I have to tweak in order for this annoying box to keep reappearing. I have deleted everything I know of in Google mail and my IMAC mail. Thanks for any feedback

From the Mail menu bar, select
Window ▹ Connection Doctor
Look for the unwanted SMTP (outgoing mail) account in the window that opens. Double-click it. Another window will open, showing a list of all the outgoing mail accounts. The unwanted one will be selected. Click the minus-sign button to delete it, then click OK.
If there's more than one unwanted account, repeat.

My Macbook pro has the message on a black screen need the reboot disc then press any key to continue. Any Ideas, because I have no discs.

My Macbook pro has the message on a black screen need the reboot disc then press any key to continue. Any Ideas, because I have no discs.I am running Lion OS

Was this a dark gray screen that appeared with the message to restart the computer in five different languages? If so that's a kernel panic. It would help if you can post the panic log: Mac OS X- How to log a kernel panic. Also visit The XLab FAQs and read the FAQ on diagnosing kernel panics.

My partner deleted my itunes (10) library. I use a WD external back-up and retrieved my itunes library, but when i try to play a song i get the message 'could not be used because the original file could not be found Would you like to locate it?'

My partner deleted, by accident my itunes library. I have an iMac 10.6.7, Itunes 10. I use an WD passport as an external back up and retrieved my itunes library but now get the message "could not be used because the original file could not be found. Would you like to locate it?" so itunes is not recognised the exclamation marked songs, how do i get the retrieved files recognised. At times I get fed-up with Apple blocking files being used, although I like the product its restrictions are so silly!

You not only have to retrieve the library file from the backup drive but the actual music files (usually stored within the "iTunes Media" folder) as well.

Unable to move message, the message could not be moved to the mail box trash

I have an iPhone 4 with the error message 'unable to move message, the message could not be moved to the mailbox trash' with 4 emails, I managed to remove 2 of the messages by marking them as read however with the other 2 i tried this and it just crashed the Mail app any help would be appreciated.

Did you have Hotmail set-up with Android prior? I did, and if you did too, you have the same problem, and this is how to solve it.
From your desktop computer, the Hotmail (or Outlook) website uses the folder "Deleted" for your deleted messages as default. On your iPhone, the deleted folder's name by default is "Trash".
When I had my Hotmail with Android, it created a folder Trash for deleted messages, and it's creation was amongst all my folders. So when you go back and look at Hotmail from your desktop, you will see a folder Trash, in addition to the default Deleted. My Trash folder had all the emails I deleted from my Android.
That said, with the manual folder Trash that was created, when trying to set-up Hotmail now on iPhone, because I already had a folder Trash, it conflicted with the default "Trash" folder it wanted to created, so it didn't create it, being the reason why you can't delete emails, because it doesn't have the defaulted "Trash" folder to go to.
The solution is to delete the folder "Trash" from your desktop, uninstall Hotmail from your iPhone, and re-install, and it worked, the defaulted "Trash" was then created, alongside the "Sent" and "Junk".

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

I have an Iphone 5S and used to sync it to my computer in the past without any problem, but now I can't, and appears the message "usb device not recognized", and the cable is good and so the USB port. Do you have any idea what's the problem?

Try leaving it plugged in and then restart the computer.
If you are on Windows this link may help but it is a bit old.
http://www.technologynext.org/error-usb-device-not-recognized-how-to-fix/

How to view the Messages on the Stream Queues in the MQSeries Explorer

Similar Messages

Maybe you are looking for