How to view your newly created webservice in dynamo administrator??

hi everyone,
i newly created a webservice for getGiftlistId and i can successfully see that in my dynadmin webservice Registry . but when it comes to accessing that getGiftlistId.wsdl i could not able to find the URL fo the same. For example we have a webservice for getInventory , we can access the wsdl with a URL http://hostname:port/commerce/inventory/getInventory?WSDL.
getInventory is a pre-built ATG webservice. so we can access directly with the above given URL. how can i access my getGiftlistId ??
can anyone tell me the how that url's will be constructed???
Thanks&Regard,
Ravi.

I don't know much about webservice.
But when I generate server side code(for testing purpose) from wsdl using generate java bean skeleton option, It generates InvokeMY_SERVICE_SEIPort.wsdl.
So to access the webservice I used following url:
     http://domainname:port/Webservice_context_root/../InvokeMY_SERVICE_SEIPort - this is the wsdl file path.
In order to view the wsdl I used following url:
     http://domainname:port/Webservice_context_root/../InvokeMY_SERVICE_SEIPort?wsdl
Thanks,
Nitin.

Similar Messages

  • Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)?  Thank you!

    Can someone please tell me how to view a newly created Genius playlist (not via Up Next, but as a stand-alone playlist)?  Thank you!

    >> then I get a completely blue screen.
    That probably means that you're not looking at a bug in Photoshop, but a problem with a driver - and the most likely cause would be your video card driver.
    And sure enough, your video card driver is almost 2 years out of date.
    Please go to NVidia's website and get the latest driver - then follow their directions for installation (so you don't get bits of old driver left over).

  • How to Apply a Newly Created Access Policy on Existing Users in OIM????????

    How to Apply a Newly Created Access Policy on Existing Users in OIM?
    When the rule is getting failed the user is getting removed from the group but resource is not getting revoked. This is happening only for the old uses..for the users which i created now it working fine..i mean its resource is getting revoked.
    (Retrofit access policy" is checked on the Access Policyand Revoke if not longer applied is checked.)
    For the old users i see the POl_Key is null, for new users i see a value '10'. So i updated the pol_key for old users same as it got generated for new users '10'.
    i even updated the form version too but still revoke doesn't work.
    I cant go for the below approach..
    In order to apply a newly created Access Policy on existing users, one has to make sure that:
    1) "Retrofit access policy" is checked on the Access Policy.
    2) Then run the "Set User Provisioned Date" Schedule task to apply the Access Policy on the existing users in OIM.
    Note: After 9.1.0.1 BP03 the access policy execution has been moved to a new scheduled task "Evaluate User Policies" as mentioned inDocument 839368.1 :How to Use Access Policies to Provision with Groups.
    Is there any other approach i can try.. if you have any idea please reply me asap
    Thanks..

    Thanks for the reply kevin..
    We decided to try the Schedule task (Set User Provisioned Date).
    But i see one problem here after seeing this post in metalik --> Can Access Policies Manage The Life-cycle Of Users Created via Reconciliation? [ID 1136540.1]
    According to this post Access Policies framework does not manage users who are obtained either through trusted reconciliation or target reconciliation.
    Is there any custom way to achieve this??
    How does the access policy framework revoke resource work? (revoke if no longer applies)??
    Edited by: IDMuser19 on Jun 21, 2011 11:43 PM

  • How to view your purchase history

    how to view your purchase history

    To view your account's full purchase history follow the instructions on the page that you linked to.

  • How to get the Newly Created Material

    Hi all,
    Iam creating Materials using BDC sessions method,My Problem is to update the Newly Created Material in a Ztable.
    so iam getting the Newly created Matnr by the following peice of code
        SELECT  matnr FROM mara INTO  TABLE v_matnr
                               WHERE ersda = sy-datum
                               ORDER BY matnr DESCENDING.
    But the thing is,we are getting Previously created material.i.e the new material will be  created only after the sessions are processed,but when i write the above code in the program we are getting previous material.
    so how to update the newly created material.
    I think we can't do  that through program because we can get new material only after processing the session..so what is the solution for this.should we use userexits for getting the newly created material.
    thanks in advance
    balaji

    Hello,
    Use the <b>BAPI_MATERIAL_SAVEDATA</b> to create the materials.
    The BAPI will return the Material number which is created at that instance by which u can update the ZTABLE.
    Vasanth

  • How to View PDF slideshow created with Adobe Photoshop Album?

    Many years ago during the Windows ME era, I created several short PDF slideshows with software (Adobe Photoshop Album) that included audio.  I saved them to a flashdrive.  I believe I used Adobe Reader 7 to play them years ago.  I am now running Windows 7 and attempted to open/play the videos and all I could see is the individual slides with no audio.  Is there a way to view these slideshows with audio today?  Some of them have special meaning and I would appreciate any assistance on how to view them once again.  

    Hi there! Because the forum you originally posted in is for beginners trying to learn the basics of Photoshop, I moved your question to the Photoshop Ablum Starter Edition forum, where you'll get more specialized help.

  • How to view Slideshows/Movies created in my Mac-Mini´s iPhoto, on iPad 3

    Slideshows I have in iPhoto on my mac-mini, do not show up in the iPhoto on my iPad 3 (Just Photos, Events & Albums).
    How do I get the slideshows (Saved with music in Mac-iPhoto), to show in my iPad´s iPhoto?
    Do I need another app for this?
    By the way, the same applies to the iMovie on my iPad (Do I need to import the movies/Slideshows
    from iPhoto (Mac) into iMovie (Mac) to be able to see them on my iPad?
    All I want to do is view Slideshows/Movies created in my Mac-Mini´s iPhoto,
    on my New iPad (In iPhoto or iMovie if possible).
    Thanks in advance for any help
    AMI

    Thanks for the tip Demo!
    Sadly it is so.
    Don't know why Apple didn't include slideshows into the iPhoto for iPads!
    Solved the problem with Phtosync &amp; Sugarsync Apps.
    Another super apps for transfering Movies/Slideshows to your iPod, is VLCstreamer.
    You can even watch movies that are on your Mac or extension drives via WiFi , streamed to the iPad
    without even having to upload them to the pad (Which you can do also !).
    Community = Comunication = Conclusion

  • How can i add newly create infotype in t.code po13

    Can any one pl tel me how can i view newly created infotype in t.code PO13
    Edited by: Utkarsh M parikh on Mar 10, 2010 5:29 PM

    See:
    Mac OS X Automation,
    Automated Workflow Tips,
    Introduction to Automator tutorial, and
    a four-parter on Automation in Snow Leopard by Sal Saghoian:
    Snow Leopard Services,
    Services for iPhoto,
    Safari and WebKit integration, and
    Installing and using services.
    Finally, 
    Developing AppleScript Applications and
    Apple's Automator Developer Documentation

  • How to add a newly created search group into portal's search functionality

    Is there a way to configure search in the portal to include a newly created search group?

    Could you please elaborate on what you are trying to do.
    What version of Portal are you using?
    What do you mean by a 'Search Group'?

  • How to audit my newly created Roles (FINANCE MODULE)

    Hi,
    My client send me an e-mail and asked the following:
    Can you assign a user the following roles that are standard in SAP - SAP_AUDITOR_SA & SAP_AUDITOR_SA_BC (I think from memory)?
    Change them to ZSAP_AUDITOR_SA & ZSAP_AUDITOR_SA_BC.
    Can you test our finance roles with the audit user ID? Documenting the conflicts/SOD in our roles u2013 I would suggest documents it onto a spreadsheet like the unit testing one.*
    How will i test the roles that i created with the auditor user ?
    Any ideas
    Regards,
    HIral

    Just to add few points: Also try with Transaction SU98 to check the SAP Proposed Critical combination of FI Transactions. This can be checked in the table SUKRI also.
    FYI:  To run a SOD analysis for a specific combination of Authorizations, you can try with SU97. The authorization IDs you see their can be created as per your (customers choice) by report RSUSR008_009_NEW.
    Regards,
    Dipanjan

  • How to use my newly created fonts?

    I have created a new set of fonts. saved them per letter as .eps but cannot seem to import them. The excisting libraries are .ttf ?!
    Anyone know how to get this functioning?

    Hi Jerry,
    Please refer to the following blog and check whether you followed all the steps:
    /people/harikrishna.sunku/blog/2008/12/18/work-center-and-navigation-link-creation-in-crm-2007
    You basically need to ensure that your custom work center is assigned to a navigation bar profile; and this navigation bar profile is assigned to your business role.
    Regards,
    Shiromani

  • How to view the File created against the Transport Request in ASCII format

    Hi all,
    We have a requirement where in the file created against the Transport reauest and its content should be viewed in ASCII format.
    Experts do you have answer for this.
    Is thers any method to work out.
    Thanks in advance.
    Every usefull answers will be awarded points.*********

    Hi Anji Reddy,
    Thanks for your reply.
    Let me clear my querry.
    when we create a program in se38 and save it in a zxxxx package then it will create a transport request. The Content of TR i mean is not the Program name or the object list in the TR. The content i mean here is the abap code written in the program. which will be stored as a file in the server. when we open this file it will give the SAP format. Which i want to view in ASCII format.

  • Please can i view your site created using iWeb2.0 ?

    Hello all
    I'm in South Africa and i don't know when I'll be able to upgrade my iLife to 08.
    I'm dying to see what the new iWeb allows you to do... please can everybody who has uploaded pages created with iWeb 2.0 give me their URLs...
    Many thanks
    Max

    http://gallery.mac.com/emily_parker
    That page gives you a taste of what is in store for these new features.
    The page has hundreds (335) of page elements and takes a while to load even on a fast Internet connection.
    Once loaded, slowly drag your mouse across the image used in one of the new photo album links. Drag right to left diagonally and you can "skim" through the images used in that page without actually loading that page.
    A viewer can "download" nearly any file directly from the Web page. They can also download entire "collections" of images and even movies posted on those pages (no need for QuickTime Pro).
    There are different page "background" colors for the viewers and a "slider" that can adjust the image display size. You can choose between "Grid, Mosaic, Carousel and Slideshow" displays without needing to reload the page.
    Each image has a new "Info" window which shows the EXIF data found in the file. Users can also "Subscribe" to your image albums and they will download to your computer and show in your copy of iPhoto 8.
    Does this page help you decide to upgrade?

  • How to make sure newly created row is editable by default programatically

    Hi All,
    I got a problem with creating new row in single row selection table with on click property enabled for editing mode.
    Function requirement is like: I have Mater-Detail. While creating detail lines, line has to be created with default line number. Eg: Master1 can have line numbers 1,2,3..etc, Master2 can have 1,2,3.. etc.
    In applicationTable for Pattern Create
    Action Listener=”#{CreateAndEditFiscalDocumentBean.createChargeLine}”
    In Table rowSelection="single" and editingMode="clickToEdit"
    Here the problem is:
    When I first come to the page,the first row in the detail table is editable and could able to edit any other row on click . But When I create a new row , I got a new row with line number but it is not editable.
    I want it to be editable on create and previously selected row should be read only. I have tried several ways but nothing is working.
    My observation is, when I call the bean method in Action Listener of application Table in create patteren, I am facing this problem. If I do not call this method, it is working as expected. But I need to call this method because it has to create row with line number.
    I am putting below two scenarios which I have tried. I am not successful in the both the scenarios.
    Could you please help me in achieving expected functionality.
    Many thanks in advance for your time and help.
    Scenario 1:
    Jsff:
    ApplicationTable: createActionListener="#{CreateAndEditFiscalDocumentBean.createChargeLine}"
    Table: rowSelection="single", editingMode="clickToEdit"
    Bean Code:
    public void createChargeLine(ActionEvent actionEvent) {
    FacesContext fc = FacesContext.getCurrentInstance();
    ExpressionFactory factory = fc.getApplication().getExpressionFactory();
    MethodExpression method=factory.createMethodExpression(fc.getELContext(),"#{bindings.createChargeLine1.execute}",String.class,new Class[]{});
    method.invoke(fc.getELContext(),null);
    AMImpl Code:
    public void createChargeLine() {
    ViewObject itemChargeVO = this.getFiscalDocumentCharges();
    ViewObject fiscalDocumentHeaderVO = this.getFiscalDocumentHeader();
    Row toRow = fiscalDocumentHeaderVO.getCurrentRow();
    Row newRow = null;
    Row latestRow = itemChargeVO.first();
    Integer line_number = new Integer(0);
    int numberOfItemLines = 0;
    if (latestRow != null) {
    RowSet rs = itemChargeVO.getRowSet();
    numberOfItemLines = numberOfItemLines + 1;
    if (rs != null) {
    line_number =
    (Integer)rs.first().getAttribute("LineNumber");
    while (rs.hasNext()) {
    numberOfItemLines = numberOfItemLines + 1;
    Row row = rs.next();
    if (line_number.compareTo((Integer)row.getAttribute("LineNumber")) <
    0)
    line_number =
    (Integer)row.getAttribute("LineNumber");
    line_number = line_number + 1;
    newRow = itemChargeVO.createRow();
    newRow.setAttribute("LineNumber", line_number);
    itemChargeVO.insertRowAtRangeIndex(numberOfItemLines + 1, newRow);
    itemChargeVO.setCurrentRow(newRow);
    } else {
    newRow = itemChargeVO.createRow();
    newRow.setAttribute("LineNumber", new Integer(1));
    itemChargeVO.insertRowAtRangeIndex(0, newRow);
    itemChargeVO.setCurrentRow(newRow);
    Scenario 2:
    Bean method changes:
    public void createChargeLine1(ActionEvent actionEvent) {
    Row newLine = ApplicationsTableEventHandler.getInstance().processCreate(getChargeTable());
    newLine.setAttribute("LineNumber", new Integer(1));
    }

    Hi Jerry,
    Please refer to the following blog and check whether you followed all the steps:
    /people/harikrishna.sunku/blog/2008/12/18/work-center-and-navigation-link-creation-in-crm-2007
    You basically need to ensure that your custom work center is assigned to a navigation bar profile; and this navigation bar profile is assigned to your business role.
    Regards,
    Shiromani

  • How to edit a newly created assignment block?

    I created a new AB and it shows up and saves values input too. However, when I open it up for editing, unlike other ABs, it does not show any buttons for editing. So I can not edit already input values. Any ideas what I am missing here? I created the view as a form type with std buttons. It is in configurable mode too.
    Regards,
    Amar.

    Hi Amar,
    yes, you need to code for the edit button. Have a look at the last lines of methode DO_PREPARE_OUTPUT() of class CL_BP_DATA_MARKETINGATTR4_IMPL.
    Also check the usage of the VIEW_GROUP_CONTEXT in method EH_ONTOEDIT().
    cheers Carsten

Maybe you are looking for