How to work with Fuji RAF files?

I'm using an Fuji S2 and shoot RAF files. These are not supported in Aperture. Is there a quick workaround?

WHAT!!!! work around? you missed the point of have RAW file management. What else does Aperture do making it worth the price of professional software if it is a work around?
I'm sorely disgusted that FUJI PROS2/PROS3 support was back burnered. Clearly this camera has a large installed base, just look at pbase.com
Fuji RAF files still work great in Adobe Bridge without a work around.
G5 2GHZ     23HD

Similar Messages

  • How to work with the remote file system

    Hi all,
    I want to know how we can work with the remote file sytem.
    Code should be some thing like
    File f = new File("//10.22.33.122/images")
    images is share name..
    i want the file names of all the images in that shared folder...
    Thanks in advance,
    Srinivas N

    try this one:
    File f = new File("//10.22.33.122/images")
    File[] files = f.listFiles(new FilenameFilter() {
         public boolean accept(File dir, String name)
    // Specify the extentions of files to be included.
         return name.endsWith(".bmp") || name.endsWith(".gif");
    // get names of the files
    String[] fileNamesArray = null;
    for (int indx = 0; indx < files.length(); indx++)
    fileNamesArray[indx] = files[indx].getName();
    return fileNamesArray;

  • 'Lightroom has stopped Working ' -  Fuji .RAF files - Anyone else?

    I'm  generally enjoying using the Beta version (especially the new Development Sliders) - but while the above error message has occured
    only rarely when processing .CRW RAW files, it occurs most of the time when trying to work with Fuji .RAF RAW files from my X10. Almost any attempted use of the
    Develop Mode causes the program to stop working. My computer has 8GB RAM - Windows 7 Home Premium 64-bit and Intel Core Duo 3.06 GHz processor.
    Anybody have any similar issue or comments? No problems occur with my 3.6 Version.
    I am looking forward to the Final Version 4. Thanks for all your know-how and efforts with this program.

    I have a very similar problem with psd files, less frequent with dng.  LR4 is uses 50% of available cpu cycles. System is similar with 6GB memory.

  • Question. How do I update / modify my site? Do I work with the original file "modify"?

    How do I update / modify my site? Do I work with the original file "modify"?

    Not sure why modify is in quotes ... but yes you work with the original and then publish again or export the HTML again.

  • How to work with Canon EOS 6D log file in Lightroom

    After searching all over the place I found an easy solution for working with the log file from the Canon 6D.
    This file is in .log format and can not be imported in Lightroom directly, because LR works with the .gpx format.
    First place the file out of the camera memory to the SD card as told in the manual.
    Copy the .log file to your computer.
    Go to GPS Visualizer.
    On the start screen there is a green box.
    You can choose the .gpx output format there.
    Browse for your .log file.
    Give command to convert and after a short while you can download the converted .gpx file.
    This one you can import in Maps in LR (with that snake like symbol down the mainscreen).
    This worked perfect for me and I would like to share this information, because both Canon and Adobe couldn't help me and pointed to each other.
    Good luck!
    Frans

    You should never use relative paths to access the filesystem. The path would be relative to the current working directory which is not per se the same in all environments. To convert a relative web path to an absolute file system path, you need ServletContext#getRealPath(). Use this absolute file system path in the java.io stuff. In a JSF application on top of Servlet API you can get the underlying ServletContext by ExternalContext#getContext().
    Alternatively, if the file is located in one of the default paths of the classpath or if its path is added to the classpath, you can also just use ExternalContext#getResource() or even #getResourceAsStream() using just the file name.

  • How to work with an EXISTING wordpress site in side DW CS5 (yahoo hosted)

    Have and existing  Wordpress site that is hosted by Yahoo.  Recently upgraded to  Dreamweaver CS5. Was really excited about working with my Wordpress  files inside of DW CS5 with all of it's new capabilities, bells and  wistles.  I can't seem to get it set up right.
    Is Dreamweaver CS5 ABLE to display existing wordpress sites with dynamic content? And can anyone please help me figure out how.
    I have been thru several lynda.com video tutorials including:
    Dreamweaver CS5 and Wordpress 3 by Joseph Lowery (over the last month)
    Dreamweaver CS5 with PHP and MySQL by David Gassner (over the last month)
    PHP with MySQL essetial training by Kevin Skoglund (about a year ago when trying to learn php)
    Self-hosting a Wordpress site (about a year ago when I set up the site)
    I have also been scouring this forum and the web trying to find the answer to what seems to be a very common problem.
    Using Mac OSX 10.6.6
    MAMP
    Dreamweaver CS5
    Wordpress 3
    Yahoo web hosting
    Everything works fine with the exercise files but as soon as I try my existing site files it gives me one of several errors
         cannot establish a connection to the database
    I set up my site thur the DW site manager with the
    Local Site Folder set to: /applications/MAMP/htdocs/nate
    server set to:
    name: testing
    connection using: local/network
    server folder:  /applications/MAMP/htdocs/nate
    web url: http://localhost/nate
    under the advanced tab i have set the server model to: php mysql
    and have the testing box checked in the site set up dialog box
    I also set a remote server:
    name: remote
    connect using: ftp
    ftp address: ftp.MY_SITE_NAME.com
    username: myusername@MY_SITE_NAME.com
    password:  mypassword
    under the advanced tab i have the server model set to: php mysql
    and have the remote box checked in the site set up dialog box
    when tested connection was made.  I also downloaded all of my site files using this connections (it took hours).
    I installed MAMP and set the ports to the defauls (80, 3306) host: localhost username: root password: root
    If i change the database settings in the wordpress wp-config.php file  to: localhost, root, root it works and displays my page as I would  expect in live view or browser but without the main content area or  posts - displays a 404 error where the content should beI have exported my wp database and imported back into my local testing server thru phpmyadmin.
    I have also gotten this error at various tries in the set ups: "dynamically-related files could not be resolved because of an internal server error"
    I am currently getting this error: "Dynamically related files could not be resolved because the site definition is not correct for this server"
    It is not asking me if I want to save files to the server when I hit live view.
    Everything  works fine with the lynda.com exercise files and with the generic wordpress files.  I can open any page -  live view or view in browser  - can access and modify the imported  database thur dreamweaver and phpmyadmin. I am only having these problems with my existing site files. I have done the complete set up at least 5 times from scratch going thru the videos and various tutorials step by step.  I dont want to use the starter files that come with wordpress installations I want to use my highly modified pages/themes/database

    DW does not work with a WP installation that has anything other than the default (numeric) permalinks. Apparently no-one ever tested this case during the development and prerelease phase, which is a shame, because very few WP installations use default permalinks. It's a point that Joseph Lowery doesn't touch in his tutorial, and of course the tutorial WP installation works perfectly.
    Hope that helps, although it may disappoint (as it did me, and a lot of other folks). Here's hoping this is addressed in a dot release.
    Alan

  • Advice needed: The way to solve out of memory problem (or the way to work with big csv files)

    Hello:)
    I'm in trouble: I have a big csv file (over 5gb of web-analytics data) and my 64 bit excel (and 6gb ram)
    I cant load file to data model because of it's size. There is an error "out of memory" in power query. 
    This is the first time when I encountered such a problem.
    What options do I have to work with such a file? To increase memory in my computer? Would it solve the problem? How much do I need to work with 6gb csv? 
    Or may be I can upload my data somewhere to azure and work with it there? 
    So the problem - is there any way to deal with big files using power query? Or I need to become a developer and learn sql or other languages? 
    Thanks in advance.
    Max

    Hi Miguel!
    Thanks for your answer. 
    I've tried to load this file on virtual pc from azure cloud with this config:
    I have increased memory limit in power query settings:
    And still, the proble is the same:
    What I do wrong? 

  • Working with bootstrap css file after opening the browser

    working with bootstrap css file after opening the browser when i came back on working on bootstrap my computer started hanging and opning new tabs  and showing message " A caused the program to stop working correctly.Windows will close thoe program and notify you if  solution is available"

    Hi Geetha,
    1.) button problem:
    i don't know how you open the form - when you do it with a XML file maybe you packed the wrong XML file into your addon installer.
    2.) the flickering can be a problem of formatted searches or interacting with other addons.
    when addon a. changes a field it can be that addon b. does something because of the event from addon a.
    the same can happen when you have formatted searches that do something when a field changes.
    ok - that are my last tipps for this day
    good night
    David

  • Working with HD m2ts files to get best video out burned on disk.

    Working with m2ts video files, how to get best video output.  I have Pinnacle 12U and the video picture that is produced on a burned disk is much better then what is produced in Adobe Premieme PRO CS4.  I would like to continue to use Premieme Pro, but unless I can archive at least the same quality of video it would be hard to make the switch.  I must be missing something???  HELP!!

    More input,  the media file output is VTS.VOB format from Adobe and from Pinnacle it is m2ts.  When you stop the playback m2ts is real sharp and the the VOB is not as clear.  During the playback the m2ts disk is so much better than the Adobe VOB format.
    Does anyone know if this is the best format that Adobe can produce?   It's a shame that with the great High Definition picture that you can now get out of a personal movie camera, that Adobe cannot produce the same quality picture out on disk!!

  • How to work with framewok

    Hi,
         I want to create a small program in Xcode which create a excel speedsheet with fiew sheet and put data into sheet using
         VisualBasicforApplication.framework.
         What can i do, so that i can create/write excel files in xcode on Mac OS X?
         Please help me as soon as possible.
    Thanks

    Originally Posted by skoltogyan
    How to work with database in the Teaming ?
    I need create some web-forms and store it in the database on the server.
    Any example - how i can do this with Teaming ?
    Please, Help me.
    Serg
    Hi Serg,
    Not sure what you are looking for and I'm also no dev...
    Maybe this link will help : Episode X: Teaming Templates | Novell User Communities

  • How Ajax works with Struts framework

    How Ajax works with Struts framework .
    Thanks
    Ramki

    So we must write file name(like abc.do), If am using struts <html:link > tag like <html:like action="abc" >Click</html:link>, so with ajax we must call like <a href ="abc.do">Click</a> .
    But there is a problem, if am using ,
    <servlet-mapping>
    <servlet-name>MainServlet</servlet-name>
    <url-pattern>/r/*</url-pattern>
    </servlet-mapping>
    or
    <servlet-mapping>
    <servlet-name>MainServlet</servlet-name>
    <url-pattern>*.do</url-pattern>
    </servlet-mapping>
    here i am changing web.xml file based on client interest. At those situation we must change all jsp pages for <a href ="/r/abc">Click</a> .like,.
    It's very difficult.
    Is any other way to use ajax with Struts (Only struts tags)
    Thanks
    Ramki

  • How to work with DTR  and CBS?

    Hi
    I have designed one web dynpro application. Now I want to work on this application through DTR. Means i want to do versioning and all. How to work with DTR..? I have gone through lot of blogs and help available in SDN but i am unable to understand how to work with it.
    One more thing how to work with CBS. How to configure CBS. I have NWDS latest version 7.0.7. In window perspective i am unable to find JDI. can any one please explain me if u have worked on this with example
    If possible can any one send me the screen shots how to work with these ?
    Best Regards
    Ravi Shankar B

    Hi Ravi
    For you to work with DTR and CBS, firstly u will have to configure JDI on server.
    To configure the NWDI, please go through the links given below:
    http://help.sap.com/saphelp_nw2004s/helpdata/en/07/f6bc3d42f46c33e10000000a11405a/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/71/0369404c65587ee10000000a155106/frameset.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/43/26b84d6c823f66e10000000a11466f/frameset.htm
    In Nutshell, following steps will be performed:
    1) logon to Portal Devinf.
    2) click on CMS
    3) Go to landscape configurator
    4) create domain
    5) create tracks and add Software components in that track
    6) runtime systems ( dev/qa etc are configured
    7) in the transport studio, all the files listed are checked in through check - in tab.
    8) they move to developement tab.
    Once all these things are done, in your NWDS:
    1) Setting the devbox host name and server port in Window -> Preferences -> SAP
    J2EE Engine
    2) Setting Portal URL in Window -> Preferences -> JDI -> DC Pool and ping server,
    to check whether server is getting accessed from NWDS.
    3) Once server is set, login to DTR and go to DTR perspective. Create a client there, by doing a right click and filling up the required details.
    4) In the DC perspective, in the Local DCs view, perform import configuration.
    5) the dev track is not configured
    6) Under this, after logging into DTR, now you can create your project, check them in and create new versions.
    Thanks & regards,
    Anupreet

  • Scheduling Gantt: How to work with the "zoom-to-fit" drop-down

    I'm trying to figure out how to work with the "zoom-to-fit" drop-down on the scheduling Gantt dvt control. It has choices in the drop-down that are not appropriate for my project. The documented purpose of this drop-down is to allow the user to zoom to a level that would allow a certain time range to "fit" within the current window. The choices start at "1 Week" and go up through "2 Weeks", "1 Month" etc. The problem is that the projects I'm displaying are generally just a couple of days long, and consist of many small tasks. So even 1 Week is too big. Also, no matter what I pick in this drop down, nothing happens.
    So my questions are these:
    1. Can I change the choices in this drop-down? If so, how do I do that?
    2. If not, then how can I remove this drop-down? (I figure I probably can if I disable "zoom", but I don't want to do that.)
    3. How do I get this to actually do something? I assume maybe I have to code some listener somewhere, but if so, how do I do that.
    Thanks for any hints, tips and advice!

    Currently, we do not allow customization of zoom-to-fit. Please file an ER. We could add a param to featuresOff attribute to disable/remove zoom-to-fit from the toolbar without disabling/removing zoom.

  • JSR 296 - How to work with arguments?

    Hi Everyone,
    I am developing an application by using a JSR 296 Swing Application Framework but I don�t make any idea about how I could manage a line-command arguments.
    Should I try through Application.getInstance().getContext().getResourceMap() or something like that?
    My intention is to get access to arguments within the method startup(). However, note that they are not directly available for use unless I create a array member and explicitly assign them to this new member (I suppose it must have a suitable way for doing this instead of I mentioned):
    I am using Netbeans 6.0 beta 1 to create this application, under the option File < New Project < Java Desktop Application
    See below a snippet. As you can see, I would like to get a value of the first argument passed by user from line command.
        * Main method launching the application.
        public static void main(String[] args) {
            launch(MyApplication.class, args);
        @Override protected void startup() {
            // here I would like to access the arguments
            String firstArg = ?
            // show main frame
            show(new MyApplicationView(this));
        }Does anyone know how to make it possible?
    ~Fernando
    Edited by: [email protected] on Oct 17, 2007 10:08 AM
    Edited by: [email protected] on Oct 17, 2007 3:18 PM

    Originally Posted by skoltogyan
    How to work with database in the Teaming ?
    I need create some web-forms and store it in the database on the server.
    Any example - how i can do this with Teaming ?
    Please, Help me.
    Serg
    Hi Serg,
    Not sure what you are looking for and I'm also no dev...
    Maybe this link will help : Episode X: Teaming Templates | Novell User Communities

  • How to work with BarTender software from LV ?

    Hi,
    I'd like to activate Seagull's BarTender Label printing software (version 7.71) from Labview.
    Basically I need to create a new label, add text and pictures/icons to it and then send it to the printer.
    I noticed an Active-X option exist but I'm not sure how to work with it. I started building something like the attached file but I don't know how to continue.
    Does anyone have some examples ?
    (Otherwise, is it possible to use command lines ?)
    Thanks in advance,
    Mentos.
    Attachments:
    Bartender_Example.vi ‏12 KB

    What type of printer are you trying to communicate with? Depending on the printer it may be possible to communicate directly with the printer itself. You would need to define the label or labels you would like to print and insert the data on the fly in your application and then send it to the printer.
    I am not familiar with the BarTender application itself so I can't give you advice on interfacing with it. However if it does have an ActiveX interface you should be able to communicate with it directly.
    Mark Yedinak
    "Does anyone know where the love of God goes when the waves turn the minutes to hours?"
    Wreck of the Edmund Fitzgerald - Gordon Lightfoot

Maybe you are looking for