How to Write Error messages to application.log file in OAS 10g.

Hi All i am in urgent need of writing log messages to Oracle Application Server10g application.log file.
Using JDeveloper 10.1.3.4.0.4270.
Thanks & Regards,
Renuka
Edited by: Renuka on Jan 18, 2013 8:00 AM

Zariel wrote:Boot from where? If you want the entire boot process you can use debug parameter. BUT I dont know what you will get becauseyour harddrive gets mounted during init, and during init it dumps dmesg to a log file, i guess dmesg gets its logs from minilogd which also gets started during init. The only way of doing it would be to get the kernel to log its output to ram then flush it to disk at the relevant time. Ive no idea if you can do this or not.
I just boot normally from my hard disk, but all the messages between "INIT version 2.86 booting" and the output from /etc/issue (when login is started), is gone. It's not in /var/log/messages nor do I get it via dmsg.
All the kernel messages BEFORE "INIT version 2.86 booting" are logged okay.

Similar Messages

  • How to write Error message for select options?

    Hi
    i have this select option statement
    SELECT-OPTIONS: s_fevor FOR afko-fevor.
    how to write error message for this?
    Regards
    Smitha

    Error messages are displayed for Select-options mostly on two conditions:
    1) You needs to check wether a value is entered or not its done by:
    a)
    Select-options:SELECT-OPTIONS: s_fevor FOR afko-fevor Obligatory.
       In this case error message is automatically throwed by system.
    b) You can do this in Selection Screen events.
    Ex:
    AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
    IF S_FEVOR-LOW IS INITIAL.
    MESSAGE 'XXXXX' TYPE 'E'.
    ENDIF.
    2) You need to Validate the entered value:
    You can do this in Selection Screen events.
    Ex:
    AT SELECTION-SCREEN./AT SELECTION-SCREEN ON S_FEVOR.
    SELECT FEVOR
                 FROM AFKO
                 INTO AFKO-FEVOR
                 UP TO 1 ROWS
    ENDSELECT.        
    IF SY-SUBRC NE 0.
    MESSAGE 'XXXXX' TYPE 'E'.
    ENDIF.
    Regards,
    Gurpreet

  • Help on printing error messages to a log file

    Hi, may I know whether is there any way to print the error messages to a log file? Thanks for your help!

    noobboy,
    Please refrain from crossposting all of your questions into multiple forums. You were asked to stop this the last time you did this as well. Please be more considerate in future.

  • Displaying error messages from application log

    Hi,
    I am using the function module RV_DELIVERY_CREATE for creating delivery in my program. If the sy-subrc is not zero i.e if delivery is not created, i have to display error messages collected inside the application.How can i do this ?
    The object nd subobject are existing in SLG0 but when i
    tried to see the object and subobject in SLG1 transaction , no logs were found.
    Do we need to activate the object and sunobject somewhere before logging can take place??
    I am using the following code in my program to display the logs but it is displaying no logs found: 
    CALL FUNCTION 'APPL_LOG_SET_OBJECT'
          EXPORTING
            object                    = 'ZCH_SCL'
            subobject                 = 'DL'
      LOG_HANDLE                = ' '
      NO_LOG                    = ' '
    EXCEPTIONS
      OBJECT_NOT_FOUND          = 1
      SUBOBJECT_NOT_FOUND       = 2
      OTHERS                    = 3
          IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
          ENDIF.
    CALL FUNCTION 'APPL_LOG_INIT'
    EXPORTING
    OBJECT                    = 'ZCH_SCL'
       SUBOBJECT                 = 'DL'
      LOG_HANDLE                = ' '
    EXCEPTIONS
      OBJECT_NOT_FOUND          = 1
      SUBOBJECT_NOT_FOUND       = 2
      OTHERS                    = 3
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
          PERFORM z_call_rv_delivery_create. " to call fm rv_delivery_create
          IF sy-subrc ne 0.
            CALL FUNCTION 'APPL_LOG_DISPLAY_INTERN'
      EXPORTING
        object                               = 'ZCH_SCL'
       subobject                            = 'DL'
       title_list_screen                    = 'Error Logs'
      COLUMN_SELECTION                     = '11112221122   '
      COLUMN_SELECTION_MSG_JUMP            = '1'
      EXTERNAL_NUMBER_DISPLAY_LENGTH       = 20
      I_S_DISPLAY_PROFILE                  =
    IMPORTING
      NUMBER_OF_PROTOCOLS                  =
    EXCEPTIONS
      OBJECT_NOT_FOUND                     = 1
      SUBOBJECT_NOT_FOUND                  = 2
      OTHERS                               = 3
    thanks,
    vartika

    Hi Vartika,
    you need to save that log after creating and appending to it.
    here is a code to save that log.
    If log created, save to database
      if e_bal_hndl is not initial.
        refresh: bal_hndl.
        append e_bal_hndl to bal_hndl.
        call function 'BAL_DB_SAVE'
          exporting
            i_client         = sy-mandt
           i_in_update_task = 'X'
            i_t_log_handle   = bal_hndl
          importing
            e_new_lognumbers = log_no
          exceptions
            log_not_found    = 1
            save_not_allowed = 2
            numbering_error  = 3
            others           = 4.
    u have to write this code after appending info to Log.
    hope this will help.
    regards,
    vikas

  • Email portlet 9.0.4 shows error message in application.log

    Hi,
    I deployed the email portlet 9.0.4 on 10g portal. It works for some time but since an unknown point in time it shows the following in the portlet area: "Failed to get the ImapClient instance, either you are not authenticated to use the service or session is lost. Logout from portal and login again. ".
    And in the application.log I found the following:
    04/01/05 15:51:39 email: [instance=25024_EMAIL_PORTLET_71546261, id=94025627009,3] ERROR: oracle.portal.integration.email.imap.ImapException: Failed to get the ImapClient instance, either you are not authenticated to use the service or session is lost. Logout from portal and login again.
    oracle.portal.integration.email.imap.ImapException: Failed to get the ImapClient instance, either you are not authenticated to use the service or session is lost. Logout from portal and login again.
    at oracle.portal.integration.email.impl.ImapClient.getInstance(Unknown Source)
    at htdocs.message__header._jspService(_message__header.java:65)
    at com.orionserver[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].http.OrionHttpJspPage.service(OrionHttpJspPage.java:56)
    at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:347)
    at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:509)
    at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:413)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:251)
    at oracle.portal.provider.v2.render.http.AbstractResourceRenderer.renderBody(Unknown Source)
    at oracle.portal.provider.v2.render.RenderManager.render(Unknown Source)
    at oracle.portal.provider.v2.DefaultPortletInstance.render(Unknown Source)
    at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showPortlet(Unknown Source)
    at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.handleHttp(Unknown Source)
    at sun.reflect.GeneratedMethodAccessor3.invoke(Unknown Source)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at oracle.webdb.provider.v2.adapter.SOAPServlet.doHTTPCall(Unknown Source)
    at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:790)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.0.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
    at java.lang.Thread.run(Thread.java:534)
    04/01/05 15:51:46 email: [instance=(null), id=(null)] ERROR: Request has exceeded its warning timeout Time[elapsed=1780171ms. Warning timeout=20000ms.] Request[id=(null) providerId=71546261 portletId=(null) portletName=(null) portletInstance=(null) user=PORTAL] Thread[ name=AJPRequestHandler-ApplicationServerThread-30 priority=5 alive=true interrupted=false groupName=main]
    04/01/05 15:51:48 email: [instance=(null), id=(null)] ERROR: Request has exceeded its warning timeout Time[elapsed=180699ms. Warning timeout=20000ms.] Request[id=(null) providerId=71546261 portletId=(null) portletName=(null) portletInstance=(null) user=PORTAL] Thread[ name=AJPRequestHandler-ApplicationServerThread-35 priority=5 alive=true interrupted=false groupName=main]
    04/01/05 15:51:50 email: [instance=(null), id=(null)] ERROR: Request has exceeded its warning timeout Time[elapsed=420954ms. Warning timeout=20000ms.] Request[id=(null) providerId=71546261 portletId=(null) portletName=(null) portletInstance=(null) user=PORTAL] Thread[ name=AJPRequestHandler-ApplicationServerThread-41 priority=5 alive=true interrupted=false groupName=main]
    04/01/05 15:51:52 email: [instance=(null), id=(null)] ERROR: Request has exceeded its warning timeout Time[elapsed=100902ms. Warning timeout=20000ms.] Request[id=(null) providerId=71546261 portletId=(null) portletName=(null) portletInstance=(null) user=PORTAL] Thread[ name=AJPRequestHandler-ApplicationServerThread-48 priority=5 alive=true interrupted=false groupName=main]
    The message "ERROR: Request has exceeded its warning timeout" repeats continually and frequently. The problem stops occuring after I restart the OC4J, but it occurs again after some time. Anybody encounter the same and has solution to it?
    Thanks.

    I found that Email portlet create a new SMTP connection to the SMTP server every time initSession is called(constructor of class Smtp). These increasing number of SMTP connection finally hit the limit of the SMTP server, leading to incomplete execution of initSession, which cause the problem.
    (call path: MailProviderInstance.initSession() -> MailAuthenticationModule.authenticate() -> Smtp())
    One thing to notice is that, when I test it no mail is to be sent. There should not be any open SMTP connection. Thus I wonder if it is a mistake in the program code that makes these unnecesssary SMTP connections.
    If so, would there be a new release of email portlet available?

  • Add error message to application log from BADI

    Hi All,
    I am working on a BADI......
    As the txn is already adding its messges in log thru BAL_LOG_CREATE, BAL_LOG_MSG_ADD...etc......
    after that my badi comes into picture.....and it displays the message in POPUP
    Now i want to add my error message form BADI to this already created log .....
    Kindly suggest...
    Note..I tried to use BAL_LOG_MSG_ADD it got add but the display is in full screen...not in POPUP....
    CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
      EXCEPTIONS
        PROFILE_INCONSISTENT = 1
        INTERNAL_ERROR       = 2
        NO_DATA_AVAILABLE    = 3
        NO_AUTHORITY         = 4
        OTHERS               = 5.
    Thanks
    RK
    Edited by: Rahul Keshav on Sep 8, 2010 12:50 AM
    Edited by: Rahul Keshav on Sep 8, 2010 12:51 AM

    The scenario is.....
    we are in an appraisal form thru txn phap_admin...
    now for goal weightage.....there is a std check ...for entered value.....check value for multiple of 5.....
    if we enter weightage as 4 ...system will make it 5 and a std POPUP  will display stating that the value 4 has been changed....
    this is a std log....
    now i have to implement a badi HRHAP00_VAL_DET......for calculating the total weightage.....
    I have to throw an error if the total weightage is less then 100%....
    i cant use message type 'E'...in Badi...
    so i want to add my error message in the std log...so that both message comes in one log/popup only.....
    If you goto se80...and for function group HRHAP_UI_DOCUMENT....
    you can seen the subroutine...
    form f3100_popup_value_log_create
    here the std messages are adding to the log.....
    simillary i want to add my message too ..inside the badi....in the same log....
    thnx
    RK
    Edited by: Rahul Keshav on Sep 8, 2010 10:20 PM

  • Error message in the log file

    Hi,
    I'm running CF 7.0.2. The app is using Flash forms.
    I have this onError function in my Application.cfc.
    <cffunction name="onError">
    <cfargument name="Except" required="yes">
    <cfargument name="EventName" type="string"
    required="yes">
    <cflog file="#This.Name#" type="error" text="Event Name:
    #EventName#" time="yes">
    <cflog file="#This.Name#" type="error" text="Messsage:
    #except.message#" time="yes">
    <cflocation url="errorPage.cfm" addtoken="no">
    <cfabort>
    </cffunction>
    The app is working fine but my log file is full of errors:
    Event Name: onRequestStart
    Messsage: Event Handler Exception
    Any idea what's wrong?
    Is there any way to get more specific error message?
    Thanks,
    b.

    I have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?

  • **ERROR: Messages in webi log files

    Hi,
    My log files seem to be littered with messages like:
    ***ERROR:C3_cdbDSLServer:(A) cdbDSLServer_LoadUniverseMetadata : CreateChildItem (false)....
    or
    **ERROR:C3_Dictionary:cdbDictionaryFolder::RegisterFolder failed for: "WE Calendar"....
    or
    **ERROR:C3_tbDimensionalSLDS:BOException: ...
    or
    **ERROR:IECore_kc3CoreEngineImpl:GetUniverseLOV failed.
    etc.
    These show up in the Webi server logs.  We don't see these on the screen and I am having a hard time tracking any information about them down.  Is it a *real* error? Should I be concerned??
    thanks,
    -missy

    SAP Support said not to worry about the messages marked as ***ERROR as they 'soft errors'.
    For the example of :
    ERROR:C3_cdbDSLServer:(A) cdbDSLServer_LoadUniverseMetadata : CreateChildItem (false)...
    This message was due to a report loading the objects and taking longer than the system is designed to wait, so it logs a message and continues on to completion.  I paraphrased that a bit, but that was the primary description.
    In contrast, if it was a hard error, the report would fail and a message of some sort would be displayed on screen.
    If reports start failing or messages are displayed on screen, then I should be concerned and should open a new ticket.
    So pretty much what you said Prabhith.
    I can't say I get a warm and fuzzy feeling about this response, but nothing is failing on our end, so at the same time I am not going to push the issue.  His response was prompt and he had seen it before, so I am less worreid, but I will still continue to keep an eye on it as usual.
    thanks,
    missy

  • How to customize error message using oraus.msg file?

    Hi,
    Is there a way to modify the oracle error message (for example: instead of ORA-01481: invalid number.. we modify it to "hello ! use a valid format.." ), is it possible using the oraus.msg file if not is there a solution?
    Many thanks

    968420 wrote:
    Hi Gauyav and Keith,
    i thak you for your quick responses , but i want the customized message to be displayed wherever the oracle error appears (in oracle forms screens , sql tool requests, ) not only in pl/sql code,That is a really bad idea
    {message:id=1007020}
    It would render the database completely unsupportable by anyone, and based on the quality of exception handling that is generally seen on these forums would result in databases that simply don't work.
    SQL> declare l_dummy number;
      2  begin
      3    select null into l_dummy from dual
      4    where 0 = 1;
      5  exception when others then
      6    raise_application_error(-20666, 'It doesn''t work!');
      7  end;
      8  /
    declare l_dummy number;
    ERROR at line 1:
    ORA-20666: It doesn't work!
    ORA-06512: at line 6
    as we've a lot of forms screens and it's not possible to modify all of them.These are strange kinds of forms that it is possible to create a lot of them but not possible to modify them.
    Is there a solution for this?Fix the forms.

  • Seeing ORABPEL-12164 error message in domain.log file.

    Hi,
    Can someone help me in debugging the ORABPEL-12164 error seen in domain.log
    <2007-06-15 11:40:36,521> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Using JCA Connection Pool - max size = <unbounded>
    <2007-06-15 11:40:36,521> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_INVOICE_1.0.jar/publishStatusToOracleBAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Using JCA Connection Pool - max size = <unbounded>
    <2007-06-15 11:40:36,568> <ERROR> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Could not invoke operation 'Produce_Message' against the 'JMSAdapter' due to:
    ORABPEL-12164
    ERRJMS_MSGPROD_CONSTR_ERR.
    Unable to construct MessageProducer.
    Please examine the log file to determine the problem.
    <2007-06-15 11:40:36,568> <INFO> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> Change logging level for Logger 'NTAPDEV.collaxa.cube.ws' to DEBUG to see full error stack
    <2007-06-15 11:40:36,568> <ERROR> <NTAPDEV.collaxa.cube.ws> <AdapterFramework::Outbound> file:/E:/OraHome_1/integration/orabpel/domains/NTAPDEV/tmp/.bpel_NAPP_PO_PUBLISHER_1.0.jar/publish3A6BAM.wsdl [ Produce_Message_ptt::Produce_Message(STATE_MSG) ] - Rolling back JCA LocalTransaction
    Thanks, G

    I recently took over this system, I believe all the configuration you mentioned should have been done.
    Any pointers in verifying is highly appreciated.
    Thanks, G

  • How to populate error message in Tcode ML81N

    HI Experts,
    I have done development in ML81N tcode.
    In this Enchancement spot in FM "MS_SUBSCREEN_INFO_PBO".
    As per requirment code is developed. But I want to print error message when my condition is fail.
    In this case like this i have below statemnets are written.
        MESSAGE 'Error in EKPO' TYPE 'E'.
       mmpur_message 'E' 'ZMSG' '001'  v_srv_esll  '' '' '' .
        MESSAGE e001(ZMSG).
    but these statement are not supported .
    Please how can write error message. Help on this.
    You are get revared point.
    Advance Thanks for your help.
    Regards
    Srinu

    sloved

  • How to write error log while creating invoice and avoid implicite commit

    Hi,
    I've have written code in exit RV60AFZZ in which I check for some possible errors while invoicing via VF01/VF04. If conditions are met then we create error message and display it to the user. As result we had a lot of missing SD invoices in FI when we did batch/mass invoicing. I've opened OSS note and SAP support team wrote that using statement MESSAGE is forbidden in UE. It can lead to implicite commits.
    Do you have some example how to write error log for invoincing in VF01/VF04 transactions?
    Thanks

    @ sri nath. Please read post before answering. I wouldn't be posting trivial questions. As I wrote before it doesn't work.  Also SAP support would not answer to the question in my OSS.
    In VOFM, SAP is using routine  VBFS_HINZUFUEGEN_ALLG to write to error log.
    Mine is something like this in ue:
          PERFORM ZVBFS_HINZUFUEGEN_ALLG
                     USING VBAP-VBELN VBAP-POSNR  'ZSD' 'E '600'
                           SPACE SPACE SPACE SPACE.
    (we have custom message class)
    As result  XVBFS and VBSK are filled with error, but posting is also done.  Error log is filled but invoice is created and posted in FI.
    That is not OK.
    thanks

  • I've been receiving an error message, "That the .itl file is locked, on a locked disc or you do not have write permission". Can someone tell me how to unlock the file or disc?

    I've been receiving an error message, "That the .itl file is locked, on a locked disc or you do not have write permission". Can someone tell me how to unlock the file or disc?

    theres no - in "itunes" its all one word
    try right clicking and running itunes as adminstrator or try on a different user account

  • How to display error message in front end application

    Hi Expert,
         I have one concurrent program that used to activate and deactivate the responsibilities ,
    I want that if any error occured in this program then how can I display the error message in application front end.
    Thanks in advance.

    Hi Paul,
    In the DOC_CHECK or DOC_SAVE BADI, you have a global internal table named et_messages. The structure of this table is 'bbp_smessages_badi'. You can append your error message here by inputting the message type, ID and number. The message type is either 'E' for error or 'W' for warning and the number would depend on your message class(ID). You will be able to see the error message on top of the screen, can be a red or yellow highlight depending on your appended message. I don't think creating the error message via the MESSAGE syntax will be successful, maybe this is why you are getting a runtime error.
    Regards,
    Noel

  • How do I get iTunes back when I get the error message ; the application "I Tunes" unexpectedly quit while trying to restore it's windows. Do you want to restore it's windows?

    how do I get ITunes back when I get the error message :
    The application "ITunes" unexpectedly quit while trying to restore it's windows.  Do you want to restore it's windows?
    I already tried reloading ITunes and it still doesn't startup.

    You didn't mention but are you still running a version of iPhoto older than iPhoto 11?
    If yes, then go to the App Store and purchase the iP 11 app and install it. Back up your photo library first.
    Once iP 11 is installed and has imported all your photos do a restart of the Mac.
    This should resolve most issues with iTunes 10.6 and you should be able to run iTunes and sync up your iOS devices.

Maybe you are looking for