How to zip all the files generated using file adapter

Hello Everyone,
I have a scenario in place where i split a message into multiple messages. I used to generate multiple file using the file name present in the payload of the splitted message using variable substitution.
This is working fine.
Now the requirement has changed and i want to zip all these file and create a single zip file.
I think it could be done using run OS command option in file adapter, but have no clue how to do it.
Please help me.
Regards
Rahul Nawale

Hi,
you can use on of the command line ZIP utilities:
http://www.winzip.com/prodpagecl.htm
http://www.7-zip.org/
then when your file adapter puts the file
you can use commnad line to zip the files
Regards,
michal

Similar Messages

I have file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Ac

I have pdf file with 500 pages created from AutoCad file. In all pages, I have different document numbers.The file is not editable in pdf. How to change all the document numbers using "Comment" feature? Any alternate method? alternate method? I have Adobe Acrobat X Pro and Windows -7 platform.

Yes, I just want to cover up all the pages for those particular area of document numbers.
Nothing sensitive about it. I just want to show the correct document numbers on all pages in print out.
So, I wanted to cover up by comments, but commenting on each page will be difficult. So, I wanted to comment the same on all pages.

How to open all the pages of a file PDF in Photoshop?

Hi,
How to open all the pages of a file PDF in Photoshop?
Or
I need to know the amount of Pages in PDF.
Example:
>Set MyPhotoshop = CreateObject("Photoshop.PDFOpenOptions")
Set MyOpenPref = CreateObject("Photoshop.PDFOpenOptions")
sFileName = "C:\Temp\Myfile.pdf"
>With MyOpenPref
.AntiAlias = True
.Mode = psOpenCMYK
.Resolution = 72
.BitsPerChannel = psDocument8Bits
.CropPage = psBoundingBox
.Page = 4
.SuppressWarnings = True
End With
>MyPhotoshop.Open sFileName, MyOpenPref
I need help.
Thanks

http://www.ps-scripts.com/bb/viewtopic.php?t=1882
Have a look at this thread, the last entry has the full code and has everything you need there.
The answer to knowing how many pages is, you don't need to know!
You use SL code and no error and no page is opened. Thats the crux of the code.

How to capture all the values(occurrence) using Extraction Rules(correlation) in VSTS web test?

Hi,
I am using VSTS 2010 for performance testing and have a question about Extraction Rules functionality. Requirement below.
Example :
Server Response
<a>1</a>
<a>2</a>
<a>3</a>
<a>...</a>
we need to capture all the values with same left and right boundary. Along with the number of occurrence from the response. We need pass a random value in the
index where the index value will be between 0 - count of values with same left and right boundary.
How to find out the count of values with same left and right boundary.

Thanks for Adrian's help.
Hi PChav,
Based on your issue, I think that the Adrian's suggestion is useful for you, so I suggest you could refer the Adrian's suggestion to check your issue.
In addition, I suggest you could also try the rogeorge's suggestion to create a custom extraction rule to do this.
Reference:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/ccff9f7a-d5bc-45d5-80eb-c83f9fc0e103/how-to-capture-all-the-valuesoccurrence-using-extraction-rulescorrelation-in-web-test?forum=vstswebtest
Hope it help you!
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How do i see the thumbnails when using File Explorer

How do I get to see the thumbnail preview when using File > Open?

Not sure if this has been answered yet, but Illustrator thumbnails aren't showing in Creative Cloud Web file list. Also, anywhere to quick preview/navigator the file?

ALV GRID-how to select all the check boxes using push button

Hai All,
I displayed ALV grid & every record contains one check box as first column.
If user clicks on one push button all the check boxes needs to selected.
Could any one tell me how to do this?
Regards,
Bhaskar

Hi Bhaskar,
   Try this code :
*" Table declarations...................................................
TABLES :
spfli.                              " Flight Schedule
*" Data declarations...................................................
Work variables                                                      *
DATA :
w_checkbox TYPE c,                  " Check Box
w_checkbox1 TYPE c,                  " Check Box
w_lineno    LIKE sy-lilli,           " Current Line No
w_lines     TYPE i.                  " No. Of Records in Int.Table
Internal table to hold Flight Schedule data                         *
DATA :
   t_spfli LIKE
STANDARD TABLE
        OF spfli.
Structure to hold Function Codes                                    *
DATA :
fs_fcode LIKE LINE OF t_fcode.
                      TOP-OF-PAGE EVENT                             *
TOP-OF-PAGE.
PERFORM top_of_page.
                   START-OF-SELECTION EVENT                         *
START-OF-SELECTION.
PERFORM fetch_spfli_data.
SET PF-STATUS 'YMENU1'.
DESCRIBE TABLE t_spfli LINES w_lines.
fs_fcode = 'EXIT'.
APPEND fs_fcode TO t_fcode.
fs_fcode = 'SELECT'.
APPEND fs_fcode TO t_fcode.
fs_fcode = 'DESELECT'.
APPEND fs_fcode TO t_fcode.
fs_fcode = 'RETRIEVE'.
APPEND fs_fcode TO t_fcode.
                    AT USER-COMMAND EVENT                           *
AT USER-COMMAND.
PERFORM user_command.
FORM top_of_page .
WRITE :/50 'Flight Schedule Information'(008).
ULINE.
FORMAT COLOR 1.
WRITE :/10 'Carrier ID'(001),
          25 'Connection ID'(002) ,
          43 'Airport From'(003),
          59 'Airport To'(004),
          74 'Departure Time'(007),
          93 'Arrival Time'(011),
         106 space.
ENDFORM.                               " FORM TOP_OF_PAGE
FORM fetch_spfli_data .
SELECT carrid                        " Carrier ID
         connid                        " Connection ID
         airpfrom                      " Airport From
         airpto                        " Airport To
         deptime                       " Departure Time
         arrtime                       " Arrival Time
    FROM spfli
    INTO CORRESPONDING FIELDS OF
   TABLE t_spfli.
IF sy-subrc EQ 0.
    PERFORM display_spfli_data.
ENDIF.                               " IF SY-SUBRC EQ 0
ENDFORM.                               " FORM FETCH_SPFLI_DATA
FORM display_spfli_data .
SORT t_spfli BY carrid ASCENDING.
LOOP AT t_spfli INTO spfli.
    FORMAT COLOR 2.
    WRITE :/2 w_checkbox AS CHECKBOX,
              spfli-carrid   UNDER text-001,
              spfli-connid   UNDER text-002,
              spfli-airpfrom UNDER text-003,
              spfli-airpto   UNDER text-004,
              spfli-deptime UNDER text-007,
              spfli-arrtime UNDER text-011.
ENDLOOP.                             " LOOP AT T_SPFLI...
ENDFORM.                               " FORM DISPLAY_SPFLI_DATA
FORM user_command .
CASE sy-ucomm.
    WHEN 'SELECT'.
      w_checkbox1 = 'X'.
      DO w_lines TIMES.
        w_lineno = sy-index + 3.
        READ LINE w_lineno FIELD VALUE w_checkbox.
        IF w_checkbox = '*'.
          CONTINUE.
        ELSE.
          MODIFY LINE w_lineno FIELD VALUE w_checkbox FROM w_checkbox1.
        ENDIF.                         " IF W_CHECKBOX = '*'
      ENDDO.                           " DO W_LINES TIMES.
    WHEN 'DESELECT'.
      w_checkbox1 = ' '.
      DO w_lines TIMES.
        w_lineno = sy-index + 3.
        READ LINE w_lineno.
        IF w_checkbox = '*'.
          CONTINUE.
        ELSE.
          MODIFY LINE w_lineno FIELD VALUE w_checkbox FROM w_checkbox1.
        ENDIF.                         " IF W_CHECKBOX = '*'
      ENDDO.                           " DO W_LINES TIMES.
    WHEN 'RETRIEVE'.
      w_checkbox = ' '.
      DO w_lines TIMES.
        w_lineno = sy-index + 3.
        READ LINE w_lineno FIELD VALUE w_checkbox INTO w_checkbox.
        IF w_checkbox = 'X'.
          PERFORM fetch_sflight_data.
          PERFORM display_sflight_data.
        ENDIF.                         " IF W_CHECKBOX = 'X'
      ENDDO.                           " DO W_LINES TIMES.
ENDCASE.                             " CASE SY-UCOMM
ENDFORM.                               " FORM USER_COMMAND
This report gives you the SPFLI Data and places a check box in front of each record. When u click on select all button it will select all the records. And if you click on deselect all it will deselect all the records. When you are trying this maintain the pf-status 'YMENU1' and give the function codes as in the code.
Regards,
Swapna.

How to fetch all the contact fields using Office365 REST API

When I request for Contacts using webservices URL, Office365 returns only some specific fields (even though contact record has lot more fields). Is there any way so that I can fetch all the fields in contact record?

Currently the REST APIs are limited to the fields you see now. We're constantly working to add more features though, so that might come in the future.

OMB Plus : how to get all the generated messages into a text file ?

Hello,
I wrote an OMB TCL script and I would like to know how to get all the messages generated during the exécution into a text file.
I tried this, but it works only for a puts command :
set DesProjet ACT_1
set filename [ open "c:\\temp\\INFDE_010_IMPORT_REPOSITORY_$DesProjet.log" w]
puts "test"
Thank you for your help

Hello Alain, you should try the OMBLOG variable. If you set it inside OMBPlus:
set OMBLOG c:/temp/mylog.txtthen all the OWB specific commands are logged with their output. By OWB specific I mean all those that start with OMB.
This is more than what you see in the interface, because:
- messages inside procedures are logged; you wouldn't see them on std.output when you call a proc
- variables are resolved, so if you issue the command
set my_var VERY_IMPORTANT_TABLE
OMBDROP TABLE '$v_myvar'the log will show:
OMBDROP TABLE 'VERY_IMPORTANT_TABLE'
Table dropped
and you know something is wrong... so OMBLOG is very useful to intercept all manipulations on you repository.
If what you want instead is a dump of the screen output when you execute a script, I suggest you redirect standard output from the operating system command line. Unfortunately OMBPlus doesn't support all advanced redirection and tracing features of the TCL language.
Hope this helps, Antonio

Return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST

Hi,
How to return all the column values using the F4IF_INT_TABLE_VALUE_REQUEST?
For example : if the row has 3 columns then after selecting the particular row, the RETURN_TAB internal table should contain all the three column values.
Regards,
Raghu

Hi,
   Try the following...
DATA : it_fields like help_value occurs 1 with header line.
data: begin of w_vbap,
        vbeln      like vbap-vbeln,
        posnr      like vbap-posnr,
        werks      like vbap-werks,
      end of w_vbap.
data: i_vbap   like w_vbap   occurs 0 with header line,
         w_fields type help_value,
      i_dfies type table of dfies,
      i_return_tab type table of ddshretval with header line,
      i_field type dfies.
select vbeln posnr werks
      from vbap into table i_vbap up to 5 rows.
if sy-subrc = 0.
   sort i_vbap by vbeln.
endif.
clear it_fields[] , it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'VBELN'.
it_fields-selectflag = c_on.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'POSNR'.
it_fields-selectflag = space.
append it_fields.
it_fields-tabname = c_vbap.
it_fields-fieldname = 'WERKS'.
it_fields-selectflag = space.
append it_fields.
loop at it_fields into w_fields.
    i_field-tabname   = w_fields-tabname.
    i_field-fieldname = w_fields-fieldname.
    i_field-keyflag   = w_fields-selectflag.
    append i_field to i_dfies.
endloop.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
    exporting
      retfield               = 'VBELN'
     window_title           = 'Select'
    tables
      value_tab              = i_vbap
      field_tab                = i_dfies
      return_tab             = i_return_tab
   exceptions
     parameter_error        = 1
     no_values_found        = 2
     others                 = 3
read table i_return_tab into w_return_tab index 1.
if sy-subrc = 0.
endif.
Regards,
Srini.

I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff. How can I clear the memory space used by my deleted videos and photos?

I deleted all my photos and videos and then delete the deleted files but the photo app is still taking up 12 GB of space and I have no room for new stuff. How can I clear the memory space used by my deleted videos and photos? I don't know why the photos are still taking up space and if I will have to reset my phone to get rid of the problem.

Hey there TowneJ,
Welcome to Apple Support Communities.
The article linked below provides troubleshooting tips that’ll likely resolve the issue that you’ve described, where deleted files appear to be taking up space on your iPhone 5.
If you get a "Not enough free space" alert on your iPhone, iPad, or iPod touch - Apple Support
So long,
-Jason

How can I put the report generated by a program into a File?

Hi all,
   How can I put the report generated by a program into a File?It can be in TXT format or excel format which ever is possible.
I need to export this file to memory,How can I do that??
Regards,
Shashank.

Hello Shashank,
Please ignore my previous answer... Ofcourse it works...
There are several ways to do this...
two of them are
1. List -> Save -> File and press enter..
    it will ask for the format, then path where to save it. Just give the path.
2. Using function module 'GUI_DOWNLOAD'.
I'm giving the example bellow which explains the usage of both GUI_UPLOAD and GUI_DOWNLOAD.
To do this... you need to have folder with name 'TEST' and a .txt file in it with name 'test'. And contents of it are :
TEST1             ,BOT
TEST2             ,BOT
TEST3             ,BUT
with spaces.
REPORT zssr_bdc .
DATA: BEGIN OF g_t_itab OCCURS 0,
        matnr LIKE mara-matnr,
        maktx LIKE makt-maktx,
      END OF g_t_itab.
DATA: g_t_bdcdata TYPE TABLE OF bdcdata.
DATA: path TYPE string,
      path1 type string.
path = 'C:\Documents and Settings\ssr3kor\Desktop\TEST\test.txt'.
path1 = 'C:\Documents and Settings\ssr3kor\Desktop\TEST\test1.txt'.
*contents of test.txt    *
*TEST1             ,BOT *
*TEST2             ,BOT *
*TEST3             ,BUT *
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename = path
TABLES
    data_tab                      = g_t_itab.
LOOP AT g_t_itab.
WRITE:/1(18) g_t_itab-matnr, 20(40) g_t_itab-maktx.
ENDLOOP.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
   filename = path1
   filetype                      = 'ASC'
TABLES
    data_tab                      = g_t_itab.
Now you will get one .txt file with name 'TEST1.TXT' in the TEST folder.
<b>REWARD POINTS IF IT IS HELPFUL</b>
Regards
Sasidhar Reddy Matli

How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions?

How can I keep lion from generating .DS_Store files on windows network partitions, but not disable it for all network partitions? I am fimilar with changing the setting for all network partitions(defaults write com.apple.desktopservices DSDontWriteNetworkStores true), but that is undesirable when I connect my laptop to my home network. A preferable solution would be where I could control the writing of these files based on disk format (NTFS vs HFS+).

Go to MacUpdate or CNET Downloads and search for ds_store. There are numerous utilities for preventing them from being transferred to Windows systems.

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used? So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I ca

After burning a successful DVD in iDVD out of FCPX, how can I see the settings it used?
So I finally burned a DVD out of a Apple Pro Res file into iDVD in PAL format. My question now is how can I find out what the exact burn properties were so that I can apply the same burn properties to a project in Compressor 4?
Is it possible to see what iDVD did?

I don't know any way you can interrogate iDVD to reveal settings to the extent that you can in a Compressor project. What you could do is open up the show's VOB in MPEG STreamclip, go to File and Reveal Stream Information; that will at least give you some rudimentary info like average bit rate. Perhaps someone, with more iDVD experience, can chime in here.
The broader question is why use Compressor at all if your current workflow is doing the job to your satisfaction?
The value of Compressor is that it gives you control over the many parameters that affect size quality. and playability. The Compressor presets can give you a starting point for DVD delivery, Web, etc. From those presets, people typically experiment by adjusting the parameters until they get the desired results for their specific show. It's a little bit science and a little bit art. After experimenting, you may be able to get slightly better quality for the project you've successfully burned in iDVD by using Compressor and something likeToast…or maybe not.
Good luck.
Russ

To read all the database fields used in a Crystal report 10 file using Vb 6 Code

Hi
Iam in development of an Application in Visual basic which lists all the
database fields used in a particular report (crystal 10)
In simple i need to show all the checked fields in the database fields section in field explorer section of the crystal report file.
regards
venkateshG

Please re-post if this is still an issue to the Legacy Application Development SDKs Forum or purchase a case and have a dedicated support engineer work with you directly

How can I see the information about a file used in a sequence?

How can I see the information about a file used in a sequence?

You can use pretty much any two or multiple button mouse on a Mac, right out of the box.
I use this one: http://www.apple.com/mightymouse/

How to zip all the files generated using file adapter

Similar Messages

Maybe you are looking for