How use non cumulative key figure and noncumulative key figure screenshot

how use non cumulative key figure and noncumulative key figure screenshot

Hello,
Please see this docs for Non-Cumulative and Snapshot scenario,
[How to Handle Inventory Management Scenarios in BW (NW2004)|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f83be790-0201-0010-4fb0-98bd7c01e328]
[Non-Cumulative Values / Stock Handling|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e0b8dfe6-fe1c-2a10-e8bd-c7acc921f366]
Thanks
Chandran

Similar Messages

Using Non cumulative key figure in Real time cube

Hi gurus,
I have used non cumulative key figure in a real time cube and when i tried to enter some data using RSINPUT ,it is giving an error and the data is not getting saved.
Can anyone please tell me how to use the Non cumulative key figure in the Real time cube .
Thanks in advance
Regards,
Ravikanth

Hi Ravi,
Please make sure that when you use a non cumulative key figure iun your real time info cube, then choose a time reference characteristic for that key figure.
Then, this time reference characteristic applies for all the non-cumulative values of the InfoCube and must be the u201Csmallestu201D of the time characteristics present in the InfoCube.
For more detaisl, refer to the [http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm|http://help.sap.com/saphelp_nw70/helpdata/en/39/100c38e15711d4b2d90050da4c74dc/frameset.htm]
Thanks & Regards,
Balajee.

When do we use Non-Cumulative values?

Hi BW Experots?
When do we use Non-Cumulative values?How is it related with exception aggregation
Please tell me .
Thanks in anticipation.

Hi,
Taken from std, doc....
A non-cumulative is a non-aggregating key figure on the level of one or more objects that is always displayed in relation to time. Examples of non-cumulatives include headcount, account balance and material inventory.
http://help.sap.com/saphelp_nw04/helpdata/en/8f/da1640dc88e769e10000000a155106/frameset.htm
Check this out...
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a62dee07211d2acb80000e829fbfe/frameset.htm
Pls. assign points if this helps you.. ****
Thanks,
Raj

Difference between Key figure and a Key field?

Difference between Key figure and a Key field?
Thanks,
Pramod

Hi,
Key fileds as just like your primary key of R/3 Tables.
Key figure are type of info object which is used to hold amout,value for your info providers..
check this link for key figures and there types...
http://help.sap.com/saphelp_bw31/helpdata/en/80/1a63b3e07211d2acb80000e829fbfe/frameset.htm
under "Tab Page: Aggregation". you can be able to find three aggregation options:
Minimum
Maximum
Sum
Types of non-cumulative keyfigures
Regards,
Viren.

How does Non-cumulative KeyFigure Works ?

Hi, experts !
What's the difference between the non-cumulative values of summation and of last value?
And how does non-cumulative value with in-flow and out-flow works?
Does anyone have relative documents?
Plz post a copy to my e-mail: [email protected]
Thank you very much !!!
Looking forwards !

Hi, Can you also send me the doc. My Id is [email protected]
Thanks,
Sam

How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

How can I swap the Fn and Ctrl keys on ideacentre b550 touch?

The BIOS feature that you request already exists.
1. reboot the computer
2. press F1 to enter BIOS setup
3. config -> keyboard/mouse -> Fn and Ctrl Key swap

"new selection", restricted key figure and basic key figure

Hi,
I have a test report and i have a basic keyfigure "ZRevenue" and "restricted key figure"(its defined over "ZRevenue") and
a "new selection"(its defined over "ZRevenue").
Now that i have "material number" and "material color" and "request id" in the rows. ("Material color" is a navigational attribute of material number).
In the column level i have a basic key figure "ZRevenue" and "restricted key figure"(its defined over "ZRevenue") and
a "new selection"(its defined over "ZRevenue") .
In a "restricted key figure" or "new selection", we can include a basic key figure or new formula or calculated key figure or an already restricted key figure into it, then we restrict it, with one or more characteristic values. In the report output we get KF values only for those characteristic values, with which it has been restricted. Please correct me if my understanding is wrong.
Initially i restricted the "new selection" (with material number 1 to 3) and "restricted key figure" (with material number 1 to 4).
In the cube i have material numbers 1 to 11. Now all the values were displayed from 1 to 11, but for the
"new selection" (with material number 1 to 3) and "restricted key figure" (with material number 1 to 4) i got values only for 1 to 3 and values for 1 to 4 respectively. This is as expected and is working fine.
Now i tried to restrict the basic keyfigure "ZRevenue" with material number 1, the output was only until the material number 4 (this is the greatest value of the material number defined over the "restricted key figure").
Then i tried to restrict the "new selection" (with material number 1 to 9) , then the output was from 1 to 9 material numbers.
If i remove the restriction over the basic keyfigure "ZRevenue" , then i get all the material numbers from 1 to 11, for "new selection" i get values for the material number 1 to 9 and for "restricted key figure" i get values for the material numbers 1 to 4.
Can some one explain me why this behavior?
Edited by: sapbi enthusiastic on Jan 31, 2012 11:48 AM

Hi,
This is where set theory comes in handy
So what you have is a basic KF (BKF), a selection (SEL), and an RKF.
When producing an output, BEx seems to be looking for the union of all the restrictions you place on these. So when your BKF is not restricted, the union comes out to everything in the underlying DSO. When you restrict the BKF for material number 1, this is how the restrictions might have been processed internally
BKF: Restriction on material 1
RKF: Restriction on material 1-4
SEL: Restriction on 1-3
Union of these three: 1-4
When you remove the BKF restriction and make SEL restricted to 9, this is how it plays out
BKF: NO Restriction on material
SEL: Restriction on material 1-9
RKF: Restriction on 1-4
Union of these three: everything.
As the union ends up giving you everything, you get 11 records. However, as SEL is restricted for 1-9, the SEL will have values for the materials 1-9. Likewise for RKF, you'll get values only for materials 1-4. Hope this clears things up!
Regards,
Suhas

How to incorporate Command,Option,Shift and Control keys into AppleScripts?

How do I incorporate Command,Option,Shift and Control keys into AppleScripts?
for example:-
If Control key is depressed then
do something
elseif Option key is depressed then
do something else
end if
Lennox

I am trying to do this:
tell application "Finder"
set cv to current view of Finder window 1
if ( option key down of theEvent ) then
set current view of Finder window 1 to list view
elseif ( control key down of theEvent ) then
set current view of Finder window 1 to column view
else
set current view of Finder window 1 to icon view
end if
end tell
but since I am not quite familiar with this I am not getting it right
Any suggestions?
Thanks.
Lennox

Key interceptor for dialer/connect key (green) and disconnect key (red)

Hi,
Can someone tell me, how can i capture green key (dialer/connect) and red key (disconnect). In the emulator, i am able to capture all the keys as mentioned in the samples/examples. But in windows mobile (imate), it is not capturing these keys.
I want to know how i can capture these system keys in MIDP 2.0.
Thanks, and regards.

are you able to display key codes in your app (like 1 for key one, etc...)?

Using non-XML content in a report key

I have the desire within a proxy service to log a particular key/value pair in a report log where the key value is not within any XML document I have.
Basically, during the logic within the proxy service, the service has come up with a specific result that I want to log for tracking purposes. The results varry depending on the input XML to the service, but none of the results are actual values anywhere in the input XML document. Currently I have the result I want to put in the key/value pair as just a local assigned variable.
If I try to report on that variable, I receive "XPath can only be executed against XML or MFL content". Even if I fake some XML in the varible (ie <logThis>Hello</logThis> ) I get the same message.
Is there way to report on values not within the input XML document?

You will need to assign an xml variable first even if they are constants.
<Report>
<key>ID</key>
<value>{ data($header/wsa:MessageID) }</value>
</Report>
to "report"
And then get the values from it in your Report.
./key in report
./value in report
Also, be careful when using Report in a JMS proxy. Even though it is supposed to be async, the Report will not commit in the case of an exception. Even if the Report action is in the error handler! A solution to this is to build a common Report proxy (either local or jms) and publish your Report xml to it.

Non cumulative with inflow and out flow vales cant be seen in report

Hello
I have 0VALSTCKVAL Value of Valuated stock with inflow 0RECVS_VAL and Outflow 0ISSVS_VAL.
The Data is loaded into 0IC_C03 cube From BX Extractor and when I create the BEx Report it shows me the value only for the 0VALSTCKVAL.
I cannot see the value for inflow 0RECVS_VAL and Outflow 0ISSVS_VAL. What is the logic used behind this!
How can we know the reference value?
Informations please!
Points will be assigned!!
Thanks
Ram

Hello
0ISSVS_VAL : *12.236,39 *
0RECVS_VAL : *23.155,20 *
0VALSTCKVAL: 39.897,96 EUR
I have the issued stock ,received stock and the valuated stock! The issued stock and the received stock is used as an inflow and outflow for valuated stock.
Now how the values is calculated ?
Thanks
Ram!
Points will be assigned!

How Use badi "MB_MIGO_BADI" method "LINE_MODIFY" and "CHECK_ITEM"?

In MIGO I enter Transfer Posting with two positions of materials, then I press the button POST -
Conducting, in this case my expansions fulfil correctly.
If I press button HOLD - temporarily to keep the document, then I will leave transaction MIGO, again I will come, I will choose temporarily kept document and I will press the button POST-conducting, will be started necessary method u201CLINE_MODIFYu201D, where:
DATA: l_subrc TYPE sysubrc.
READ TABLE gt_line
       WITH KEY table_line = i_line_id
       TRANSPORTING NO FIELDS.
l_subrc = sy-subrc.
IF cs_goitem-bwart NE '301'.
    IF l_subrc NE 0. INSERT i_line_id INTO TABLE gt_line. ENDIF.
ENDIF.
The method u201CLINE_MODIFYu201D was executed only for i_line_id = u2018 00001 u2019 further
Fulfils method u201CCHECK_ITEMu201D with a code
DATA: ls_bapiret TYPE bapiret2.
READ TABLE gt_line
       WITH TABLE KEY table_line = i_line_id
       TRANSPORTING NO FIELDS.
IF sy-subrc NE 0.
    ls_bapiret-type       = 'E'.
    ls_bapiret-id         = 'ZMM.
    ls_bapiret-number     = '801'.
    ls_bapiret-message_v1 = '301'.
    ls_bapiret-message_v2 = 'S'.
    INSERT ls_bapiret INTO TABLE et_bapiret2.
ENDIF.
After performance u201CCHECK_ITEMu201D with i_line_id = u2018 00001 u2019, a method u201CCHECK_ITEMu201D
It is carried out once again with i_line_id = u2018 00002 u2019, and the method u201CLINE_MODIFYu201D in general is not caused any more. And as the method u201CLINE_MODIFYu201D was not caused with i_line_id = u2018 00002 u2019 in the table gt_line record 00002 was not added and the method u201CCHECK_ITEMu201D was executed not correctly.
How to make so that a method u201CLINE_MODIFYu201D it was carried out for for each position, and not just for i_line_id = u2018 00001 u2019 ?
Or advise other methods or user-exit.

Hi
Have you tried to see the sample abap code available in the BADI definition?
Max

How use easily photoshop elements 12 and bridge cs4 ?

i use bridge to classify my photos .I would like to buy photoshop elements 12 but I don't want to use the organiser (i tryed before but all my photos are in double xith the organiser and its take too much place in my mac!)
is it possible to use bridge and PSE 12 easily ?
thanks

Well, yes and no. You can use CS4 bridge, but you can't update the raw converter, so you won't be able to see thumbnails or do conversions for any raw files from cameras that aren't fairly old. But the bridge file type associations should automatically update to send pics to PSE 12 for editing.
However, although I'm not an organizer fan, either, there's one thing in your post that may be a misunderstanding:
all my photos are in double xith the organise
The organizer is just a database. It doesn't contain any photos at all, and the only time it ever copies a photo without specifically being told to do so is whent you import a whole photo library from iphoto, and then it does this to avoid writing into the iphoto library from outside iphoto, which is a Very Bad Thing to do. You shouldn't use bridge on your iphoto library, either.

How to get the card unique key(KMC) and the key data

I want to know how to get them above in the applet.
If can't, how to do?
Edited by: 893695 on 2011-10-28 上午5:03

But during personalization, where are the the application level key(derived three key: enc, mac, dek) come from?They are generated by whatever is doing the personalisation. If they are application level they are stored in the application. If they are ISD/SSD keys they are not accessible to the applet.
the custom command "put key"?Either custom or ISO7816-4 or GlobalPlatform. Once again it depends on where the keys come from or are stored.
Cheers.
Shane

Inline figure and fixed-location figure numbering

I would like to move some of the anchored figures in a story to captioned
frames, so that text will flow around them. I'm encountering two problems in doing this:
1. Figures in the fixed graphics are numbered separately from figures in the main story--their numbering starts at the end of the numbers in the main story.
2. Footnotes in the fixed figures, go to the bottom of the figure frame instead the bottom of the page.
Have I missed something? Or do I have to do a bunch of manual numbering?

randolph549 wrote:
I would like to move some of the anchored figures in a story to captioned
frames, so that text will flow around them. I'm encountering two problems in doing this:
1. Figures in the fixed graphics are numbered separately from figures in the main story--their numbering starts at the end of the numbers in the main story.
2. Footnotes in the fixed figures, go to the bottom of the figure frame instead the bottom of the page.
Have I missed something? Or do I have to do a bunch of manual numbering?
1. The numbered list that affects your caption paragraph style has the option Continue Numbers Across Stories ON. This causes the paragraphs numbered with the style that uses a numbered list to number sequentially in a given story, then across other stories on the page. A stand-alone frame that contains a caption that uses the style continues the numbering after the last number in the preceding story.
You can fix this by using anchored frames in the main text (story) for all your graphics container frames. You can adjust the text flow around the anchored frames with Text Wrap.
2. Footnotes always go to the bottom of the frame their text is in.
Incorporating all the graphics in anchored frames will collect all the footnote texts at the bottom of the single frame that contains them all.
Read about inline anchored frames, custom anchored frames, numbered lists, and footnotes in Help.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

How use non cumulative key figure and noncumulative key figure screenshot

Similar Messages

Maybe you are looking for