Key interceptor for dialer/connect key (green) and disconnect key (red)

Hi,
Can someone tell me, how can i capture green key (dialer/connect) and red key (disconnect). In the emulator, i am able to capture all the keys as mentioned in the samples/examples. But in windows mobile (imate), it is not capturing these keys.
I want to know how i can capture these system keys in MIDP 2.0.
Thanks, and regards.

are you able to display key codes in your app (like 1 for key one, etc...)?

Similar Messages

COBRAS Import for Unity Connection 8.5 and Subscriber LDAP Integration Status

Using COBRAS Import for Unity Connection 1.1 Build 212 with Unity 4.2 Voicemail Only and Connection 8.5(1)SU1 with LDAP Directory Integration
When I run COBRAS the old alias matches the new alias and my desire is for subscribers being moved to be LDAP inegrated. However after COBRAS runs, the radio box for LDAP Integration Status on the subscriber is set to Do Not Integrate with LDAP Directory. Is there a way for COBRAS to select Integrate with LDAP Directory when the alias matches on LDAP?

Hi ben,
If you are just importing from and not authenticating against LDAP, then the PIN comes
from the Connection Template you used to build the users;
Note that no passwords or PINs are copied from the LDAP directory to the Connection database. If
you want Connection users to authenticate against the LDAP directory, see the “LDAP
Authentication” section on page 9-7.
http://www.cisco.com/en/US/docs/voice_ip_comm/connection/8x/design/guide/8xcucdg040.html
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen

PS Dynamic Script for Test-Connection on OU and SubOU.

I have a non working PowerShell script for searching an OU in an 2008 level Active directory, but it is obviously incomplete. I was able to retrieve part of the script from another forum (cant remember which one, or I would kindly give them the credit they
deserve), but I was hoping to include a variable to in the "SearchBase" option below and make it dynamic, where I can change the OU to ping from a top level and have it also work under a child OU if I need to.
Outcome: Ping OU and child OU and have the option to ping either selection. Of course I would manually enter in my Search base parameters when prompted from the shell. I just want to have any easy way of ping all computers from an OU level without having
to paste the lower part of the script to my PowerShell script pane and changing the OU from there. If I can get the correct parameters working, then it would be easy to load this function to my PS profile. Thank you, and help is appreciated. Hoping someone
can let me know what I am missing to get this functional.
function
get-DCping
[CmdletBinding()]
[Alias()]
[OutputType([int])]
Param
# Param1 help description
[Parameter(Mandatory=$true,
ValueFromPipelineByPropertyName
=$true,
Position
=0)]
[string]$Search)
$rtn
=
$null
Get-ADComputer
-Filter
-SearchBase
'OU=$Search,DC=domain,DC=domain'
|
{$rtn
=
Test-Connection
-CN
$_.name
-Count
1
-BufferSize
16
-Quiet
IF
($rtn
-match
'True') {write-host
-ForegroundColor
green
$_.name}
ELSE
{ Write-host
-ForegroundColor
red
$_.name }}

Hi,
Here's a starter:
Function Get-DCPing {
[CmdletBinding()]
param(
[string]
$OrganizationalUnit
Get-ADComputer -Filter * -SearchBase $OrganizationalUnit | ForEach {
$computerName = $_.Name
$props = @{
ComputerName = $computerName
Alive = $false
If (Test-Connection -ComputerName $computerName -Count 1 -Quiet) {
$props.Alive = $true
New-Object PsObject -Property $props
Don't retire TechNet! -
(Don't give up yet - 13,225+ strong and growing)

How to set up TC for ethernet connections to MacBook and MacMini?

Hi MacGurus
Current setup:
- ISP provided modem for incoming signal.
- TC (1st generation from 2008) connected to ISP modem via ethernet cable (TC port: the one next to USB port with roughly an O-symbol). Is this the correct port to use?
- Our ISP provider only supports 5 IP addresses and in our network we also have PCs/mobiles occupying IP addresses.
- The back-up from MacBook to TC works fine through the connected ethernet cable between MacBook and one of the three ethernet (not the above mentioned O-symbol) ports on the TC.
This is what I would like to do:
- Ethernet cables from TC to both a MacBook (from 2008) and a MacMini (from 2008), i.e not use wireless transmission
- Switch off wireless function on TC.
- Use the TC to provide IP addresses for both the MacBook and MacMini in order to leave the other IP addresses for the PCs/mobiles.
Is there any other information needed from me in order to help solving the problem?
Thank you very much in advance.
Cheers/WA

Thx for quick response, below some "answers".
It helps if you spell out a few things.
- ISP provided modem for incoming signal.
Who is the ISP? And what model is the modem provided? Is this dsl or cable or fibre or something else? *** ADSL
- TC (1st generation from 2008) connected to ISP modem via ethernet cable (TC port: the one next to USB port with roughly an O-symbol). Is this the correct port to use?
The answer depends.. is the ISP modem also a router? Is the TC setup to bridge or route? *** Yes, the modem is also a wirelss & ethernet router. *** I do not know if the TC is bridge or route, how can I see that?
- Our ISP provider only supports 5 IP addresses and in our network we also have PCs/mobiles occupying IP addresses.
Here is where I am getting confused actually.. Most ISP supply just 1 IP.. the router translates that single public IP to all the computer and devices on your network which run on a private IP network.
Is the ISP giving you 5 public addresses?? Are they ipv4 or ipv6? Setting up blocks of ip addresses is more a business setup.. where multiple devices need direct internet access eg servers.. without being hidden behind a NAT router.
So the more info you can give the better.
*** Sorry for confusion. It is likely that the ISP provider gives 1 IP address, and that the modem generates up to 5 IP addresses. It is most certainly only a standard private setup, no business setup.
This is what I would like to do:
- Ethernet cables from TC to both a MacBook (from 2008) and a MacMini (from 2008), i.e not use wireless transmission
- Switch off wireless function on TC.
- Use the TC to provide IP addresses for both the MacBook and MacMini in order to leave the other IP addresses for the PCs/mobiles.
What IP addresses are you getting now?
If you plug ethernet to the macbook and mini now.. and turn off wireless, what IP address are they getting??
If the TC is in router mode they should get 10.0.1.x IP and be able to ping and share with each other.. without needing to do anything.
*** I am now connected to the modem (wireless), as I cannot connect through the ethernet cable.

Ethernet connected (in green) and is ON, Internet doesn't work

Hello,
I'm wondering if anyone has experienced this problem. I cannot surf the Web even though Ethernet is connected. When I try to go with Safari to some webpage it says it can't open it because it can't connect to server. When I try to troubleshoot the connection with Diagnostics, all 5 lights on the left hand side pane are green, Internet included. After running diagnostics computer says that everything's ok and everything should run fine. However I can't open any webpage. I have reset Safari, I have reset the modem, I have tried renewing DHCP lease, I have tried doing everything possible, I am out of ideas. Anyone?
Thank you.
Sergio

That's the thing, WiFi works fine everytime everywhere. I could connect via Ethernet cable at home without a problem, but not now (I am in dorms). I was thinking that maybe it's the modem (not mine, it's provided with the room). Do you think I should try anything else before buying a new one? Rolling back to Safari 3 or Leopard 10.5 maybe? However everything DID work at home via the cable with current application versions. And the router at home isn't exactly new or high end.

Cisco ace mibs for concurrent connection on real and virtual servers

i have loaded cisco provided mibs for cisco ace into nms but i am not able to fetch the details from ace appliance 4710.where can i find IODs for this.
would really appreciate if anyone can help me regarding this

Hi Manohar,
you need two MIBs:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Normale Tabelle";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
ftp://ftp.cisco.com/pub/mibs/v2/CISCO-SLB-MIB.my
ftp://ftp.cisco.com/pub/mibs/v2/CISCO-ENHANCED-SLB-MIB.my
The current connection you will find in the section:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Normale Tabelle";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
slbVServerInfoTableEntry .1.3.6.1.4.1.9.9.161.1.4.2.1
Example:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Normale Tabelle";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
slbVServerNumberOfConnections .1.3.6.1.4.1.9.9.161.1.4.2.1.6.1.44
Use a MIB-Browser to find out the OID for each server.
Best Regards,
Achim

X61 Ethernet connects, finds dhcp and disconnects (Linux)

Hello,
I've been having a problem with my X61 (which is in my opinion fantastic if i could just get this one thing to work!), I'm a college student who's running linux so i can both learn and become more proficient in computers. The wireless works, and has always worked for me with little issue. However, recently (and by recently i mean in the last 6 months) the Ethernet card has stopped working. When i plug my ethernet cable in while the computer is on AC power but not turned on the connection light is steady and the activity light flashes. When it's on the connection light only blinks. No activity whatsoever. Also, the computer recognizes the card, and tries to connect with it. However, when i run DHCPCD (i'm doing connections by hand right now) it connects, sees that there's a server and asks for a lease, then immediately disconnects and retries until it times out. I've heard of the X61 being vunerable to a eeProm rewriting bug involving a certain linux kernel and I can say i was running ubuntu at the time (which was affected by the bug but only under certain circumstances). so i don't know if the bug accidentally re-wrote my EEprom containing the firmware drivers and only re-wrote enough that it fails connection somtimes. If someone knows how to check the eeprom with a md5 or something i'd be happy do to it or if someone could provide me with the firmware from a copy taken from theirs i would be indebted. I'm running an 82566MM Gigabit card.
If you have any insight into this problem please let me know as i aquired it shortly after my warrenty expired and i've been desperately trying to figure out what's going on for a couple months.
Thanks in advance,
Kravlin

eth0 Link encap:Ethernet HWaddr 00:1D:72:80:FC:9B     UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
   RX packets:0 errors:0 dropped:0 overruns:0 frame:0
   TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:1000
   RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
   Memory:f8200000-f8220000
lo Link encap:Local Loopback
   inet addr:127.0.0.1 Mask:255.0.0.0
   UP LOOPBACK RUNNING MTU:16436 Metric:1
   RX packets:213 errors:0 dropped:0 overruns:0 frame:0
   TX packets:213 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:0
   RX bytes:362515 (354.0 Kb) TX bytes:362515 (354.0 Kb)
wlan0 Link encap:Ethernet HWaddr 00:1D:E0:6B:B1:47
   inet addr:172.20.4.26 Bcast:172.20.255.255 Mask:255.255.0.0
   UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
   RX packets:109292 errors:0 dropped:0 overruns:0 frame:0
   TX packets:62392 errors:0 dropped:0 overruns:0 carrier:0
   collisions:0 txqueuelen:1000
   RX bytes:152932463 (145.8 Mb) TX bytes:5849155 (5.5 Mb)
that's my if config
Also, i'm running arch linux but i've been doing all the work by hand. I tried ubuntu and vista with the same error.
Message Edited by kravlin on 07-15-2009 10:35 PM

IChat is Connecting... and Disconnecting...

Today when I opened iChat, it said "Connecting..." for 45 minutes. If I try to log out, it says "Disconnecting..." I can't get it off of either of these! It won't even be offline if my Airport is off! Any tips for getting it to work again? I just moved to a new location yesterday, but I used the new network with iChat just fine then, so it's new today.
Thank you!

Hi,
In iChat can you access the iChat menu >Preferences > Accounts ?
If so go to the Server Server Settings and change the port to 443
(In Snow Leopard turn SSL On first and Press Enter to "Set" the port)
In System Preferences > Network > Advanced Button doe the DNS tab list the current DNS Servers form your new ISP ?
8:56 PM Monday; June 7, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Need example vi using AT commands for dialing the modem at the remote end

Can any one give example vi for dialing up a modem and sending data to remote end

Hi sindhu6,
Presuming that you are connected to your modem via a serial connection:
I did find a forum related to your enquiry: http://forums.ni.com/t5/LabVIEW/AT-commands-in-labview/td-p/1213335
And I did find an example from ni.com: http://zone.ni.com/devzone/cda/epd/p/id/2577
Basically, what you need to do is to find out what are the AT commands used for your modem and send the command over using VISA related functions (e.g. VISA Read VI). You can send the command in a sequantial method. You can do this by using the method found in the first link. The best would be that you can create a state machine where by each case/state will consists of commands that you need to run in a sequence (let's say a sequence of AT commands for sending a message via TCP/IP communication).
You can also use a sequence structure but I would not suggest that since you cannot stop the sequence half way and if your command is very long, this may look pretty messy for your code.
The main question is:
What is the version of your LabVIEW?
What is the modem that you are using and how is your hardware setup is going to be (e.g. how did you communicate with your modem)?
Thank you
Warmest regards,
Lennard.C
Learning new things everyday...

Issue connection wireless clients and AP reboot

Hi all,
I have 2 problems in my Wifi infrastructure.
1) All my AP's reboot randomly, the 1st reboot was after a power failure of all the building. the 2nd one was yesterday, but we don't know why...
Here are the logs : ap_logs.png
2) I have motorola 9190 connected to a specific SSID, our customer use these motorola to scan the merchandising. They disconnect some times and they have to reconnect manually again, or reboot the scanner...
Here you can find the logs also: scan_logs.png
Here you can see the client was connected at 8h03, and disconnected at 8h05...
If someone can help me, because i really don't understand what is going on...
Thanks in advance,
Alexis

Stay away from this code... I would recommend you to go for 7.6.130.0 (7.6 MR3) when it releases within next couple of weeks.
Then see whether problem persist
HTH
Rasika
**** Pls rate all useful responses ****

Single Inbox Issue with Unity Connection 8.5 and Exchange 2003

Hello Unity Gurus,
I recently upgraded our Unity server to Unity Conenction 8.5. We are pressing hard to have unified messaging. However theres always problems it seems.
We have several 2003 exchange servers, two of the exchange servers split up our organization and one has half of the users mailboxes and the other server has the remaining half. So far the only way that I can get Unified messaging is if I create two separate Unified Messaging Services one for one half, the other for the other half.
This becomes a problem since now when I create the Unified Message account I have to know what server the user is on and the problem being is that I have 700 voicemail users ill have to look up. Not only that but, if our employees move from one site to the next and if the mailbox gets moved then I imagine most likely break unified messaging for that account.
I've read the install guide for Unity connection Unified Messaging and I understand that the second option is to have Connection to search for Exchange servers via Active Directory however, when I set that up and test it via unified messaging services I get an error " searching network...failed to locate domain controller via DNS. Failed to locate an exchange 2003 server."
DNS seems to work if I create single Unified Messaging Service and use the host name that way.
Anyone have any thoughts or found a work around to this issue?
Thanks,
Dan

We have 41 exchange UM services configured in Unity Connection on 10 clusters, each one to the 2003 exchange servers. This is the only way it will work for us, as e2k3 can not search for and find other exchange services. For 2010, it is able to search by AD domain and site name, and we only have one connector configured on each server to the e2k10 environment. I believe this is the way it works, and is difficult to manage but works. Just my two cents.

Cannot open simultaneous connections to POP3 and SMTP. Why?

This is what happens when I open POP3 and SMTP together. It seems that the host name for smtp is replaced with "localhost".
For two weeks, ever since I added a new servlet to my web application to open a connection to POP3 and check it, I was getting the exception:
<<<<<<<<<<<<<<<<<<<<< exception >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
javax.mail.SendFailedException: Sending failed;
[2003-06-08 10:31:24.895] nested exception is:
[2003-06-08 10:31:24.895] class javax.mail.MessagingException: Could not connect to SMTP host: localhost, port: 25;
<<<<<<<<<<<<<<<<<<< End >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Until this morning, I finally stopped opening the connection to POP3 and the connection to SMTP worked.
Why does this happen? What can I do to have both POP3 checked for incoming mail and be able to send mail out?
Thanks everyone for your help.

I posted this question a few days ago and didn't get any response. It turns out the problem was that I was using the same session for opening connections to SMTP and POP3 and that will not work. I replaced Session.getDefaultInstance(mailProps, null ) with Session.getInstance(mailProps, null ) and so far it's working.

HT1212 my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod

my itunes says it can not sync my ipod touch key in password on the device but my ipod touch says ipod disabled connect to itunes and doesnt give a option for my password how do I unlock my ipod

See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

I'm in Afghanistan with limited internet options. I have a wifi service plan I am signed up for however, a log in and password are required via browser log in, not a security key attached to the wifi. Please help...

I'm in Afghanistan with limited internet options. I have a wifi service plan I am signed up for however, a log in and password are required via browser log in, not a security key attached to the wifi (like a hotel). Please help...

the appletv will not be able to work on it's own
you can use a computer or iphone acting the role of hotspot login using it's browser and getting internet access and then sharing it with the appletv
so the appletv sees it as a wifi router it connects to

Find the key for join between table "crhd" and "equi" for use field "answt"

I make program for read data from table "crhd" for print about machine report
but I can not find the key for link join to table "equi" for print field "answt" (acquistion value)
please help me find the key field for join between table "crhd" and "equi" for use field "answt"
thank you very much...

This is how the Work Center is linked to a particular Equipment -
Functional - In IE03 ( view Equipments) You see the Work Center of a particular Equipment.
Technical - Go to view V_EQUI ( view of EQUI and EQUZ). Pass the Equipment number alongwith V_EQUI-PM_OBJTY = 'A' ( i,.e searching for the Object Type Work Center). In this way u ll get the V_EQUI-GEWRK - this is the Work Center ID.
You can pass this Work Center ID to CRHD. And you will get the Work Center text.
CRHD-OBJTY = 'A'
CRHD-OBJID = V_EQUI-GEWRK.
and u ll get the CRHD-ARBPL - this is the Work Center.
So u need to come backwards, alongwith ur CRHD-OBJTY and CRHD-OBJID , you pass the same to V_EQUI and u get the list of equipment numbers alongwith ur ANSWT(Acquisition value).
I guess it solves ur problem.

Key interceptor for dialer/connect key (green) and disconnect key (red)

Similar Messages

Maybe you are looking for