Which method is used for event creation

Dear All,
My client has more then one Purchase Organization. Workflow for Purchase order release very from pur org to pur org. For example - workflow WS92000030 is trigger when PO is created for India pur org where as workflow WS92000021 is trigger when PO is created for US pur org.
I checked and found that same Object Type - BUS2012 & event - RELEASESTEPCREATED is used in all Pur. Org PO release workflow. Also I found in Transaction code - SWETYP that Type linkage activate for BUS2012, RELEASESTEPCREATED in all the PO workflow - WS92000030 & WS92000021.
As per my knowledge, event can be created in various way such as Function module, Change document, General status management, Business Transaction Events etc.
Can some one guide me, how can I found that which method is used for event creation in different pur org?
How can I fould what is the fuctional module used for event creation if Fuctional module used for event creation.
For your information, I can see in T. Code - SWUO that 'Result dependent on a check function module' for all the workflow - WS92000030, WS92000021 etc.
Thanks in

Hi Sahu,
I dont think they have used the Function module or change document or any other kind of methods to trigger the workflow. This is because RELEASESTEPCREATED method is a standard method and it will be triggered by standard SAP. They can not make changes in standard sap saying RELEASESTEPCREATED should be triggered for this Purchase Org .
Istead what i think is, they might have given the Event Condition for each workflow.
In SWDD>> basic settings>> Start Events, we can give condition on triggering the workflow.
Please check this.
Regards,
Gautham

Similar Messages

Which extraction methods are used for extracting AR , AP, GL , cost centre

which extraction methods are used for extracting AR , AP, GL, cost centre account   data from R/3 system.
please let me know what type of extraction we use...generic or FISL.... OR COPA
ON WHAT SCENARIOS WE USE THIS EXTRACTIONS..
if any have documents on it please email...please send an email    documents ..
to [email protected]
iam bit confused with sap help...
will reward full points
please reply

Hi,
For general ledger :
http://help.sap.com/saphelp_nw70/helpdata/en/57/dd153c4eb5d82ce10000000a114084/frameset.htm
This is the best how-to guide on AP,AR,GL and TAX.
http://help.sap.com/saphelp_nw04/helpdata/en/af/16533bbb15b762e10000000a114084/frameset.htm
Hope it helps.
Regards,
Srikanth.

Which method is easiest for uploading data using LSMW?

which method is easiest for uploading data using LSMW (Direct method or batch input method) bcs I am facing lot of problem using batch input method while recording.Even I cannot use direct method using standard program.can anyone tell me some other easiest way for uploading MM01.?

I personally used the direct input way 6 years ago and it was a little bit of a struggle cause I was very new to SAP at the time. But it worked out to be ok in the end. You just have to keep messing with it till the errors are clear and then you can upload for real. The test mode is a nice touch, you can get rid of all of the errors before actually uploading the data.
Regards,
Rich Heilman

How will decide which method is suitable for uploading data

Hi,
How will you decide which method is suitable for uploading data

Hi,
<li>If you haver very few records, even entering manually is also an option.
<li>In most cases where we need more than 20,000 records , BAPI or Direct input would be the fastest. Here error handling is tough here.
<li>You can use BDC(Session and Call transaction methods), where we can write code to identify error records, if you get error records, those can be reprocessed.
Thanks
Venkat.O

What counter method to use for measurements on combustion engine

Hello,
Here is my dilemma. I want to measure the rpm of crank/cam shaft and thus I need to determine which of the three methods to use to get accuracy +-5rpm and couple of readings during one revolution of the shaft.
The hardware: NI PCI 6120-two counters
IRC 360-3600 pulses
Lets say I want to measure the range of rpm of the crankshaft from 100rpm(1.7Hz) to 10000rpm(166.7Hz). If I use the IRC with 720pulses I get the frequency range I will be measuring 1200Hz-120kHz assuming the IRC is on the crankshaft.
So my question is which of the methods to use? I did some calculations to determine that
1) 1 counter - the calculated rpm if the real rpm was 6000 would be between 5973-6017 which is not good enough
2) 2 counters, high freq - I would have to be using the frequency of the gate around 1Hz to get desired accuracy at 100rpm which is not suitable since I also want to have more readings through one revolution - do I understand it right? That would mean for example at 6000rpm I would have to wait 100revolutions to get one rpm reading, right?
3) seems as the right choice but still the acuracy is not good enough. If I use the divider of 10 it gives me 72readings per one revolution if the IRC is set to 720 pulse. If I measure at 6000rpm the diversion is then +-3rpm. But with 10000rpm and 3600pulses per revolution of the irc the diversion is already +-40
What method is used for this kind of measurement? How to improve accuracy?
Thanks
Message Edited by ceties on 07-09-2009 03:12 PM
LV 2011, Win7

Hi Ceties,
Yes, if you want to measure 600 kHz signal, the error will increase. I thought you were intend to measure upto 120 kHz.
In Method III, we do the following:
We have a known time period (1 ms), we have a frequency to measure (100 kHz), we will know how many pulses are going to be in that period ([100*e3]*[1*e-3]=100). First, we would like to divide this frequency with the first counter: we generate another known pulse train for 1 ms period with i.e. 500 pulses. In this case the rate will be 100/500 = 1/5.
Know, we are able to measure a lower frequency signal (100 kHz*1/5 = 20 kHz) with Method I. Which results a much more accurate measurement. That is the theory behind Method III.
Pulses per revolution to read will remain the same in each case: (frequency to measur)/(basis clock); in different methods we are trying to increase accuracy with measuring either a longer period (Method II) or diveded frequency (Method III).
I hope it will help moving forward with your project!
Regards,
Matyas

Which CKM is used for moving data from Oracle to delimited file ?

Hi All
Please let me know Which CKM is used for moving data from Oracle to delimited file ?
Also is there need of defining each columns before hand in target datastore. Cant ODI take it from the oracle table itself ?

Addy,
A CKM is a Check KM which is used to validate data and log errors. It is not going to assist you in data movement. You will need an LKM SQL to File append as answered in another thread.
Assuming that you have a one to one mapping, to make things simpler you can duplicate the Oracle based model and create a file based model. This will take all the column definitions from the Oracle based model.
Alternatively, you can also use an ODI tool odiSQLUnload to dump the data to a file
HTH

How to specify which cert to use for software virt server?

Is there a way to specify which certificate to use for each software virtual server? So, for example a user hitting https://somewhere.com would get the certificate for somewhere.com while the virtual server https://somewhereelse.com would use the certifcate with the name somewhereelse.com in it?

No, this is not possible due to limitations of the underlying protocols.
HTTP requests are sent over TCP connections which deal with IP addresses and port numbers (i.e. hardware virtual server properties), not hostnames (i.e. software virtual server properties). The HTTP protocol adds software virtual server support by allowing a client to identify the hostname (e.g. "www.iplanet.com") of the server it wishes to communicate with. This is achieved by including a "Host:" header with each HTTP request.
Unfortunately, the SSL/TLS protocols require that the web server present its SSL/TLS certificate BEFORE the client sends its HTTP request. Since the software virtual server information is contained in the HTTP request, it is not possible for the server to select different certificates for different software virtual servers.
You will need to use hardware virtual servers (i.e. virtual servers that have different IP addresses and/or port numbers) if you wish to use distinct SSL/TLS certificates.

After reopening Firefox does not remember which desktop was used for each window. Can you help, please.

I'm using two displays and several desktops on my Mac (OS X 10.9.4).
When I need to restart Firefox, it remembers to open windows from last session in correct display, but does not remember which desktop was used for each window. So when the application starts, it opens all windows on a desktop which is currently active instead of reopening them on desktops used during the last session. How to fix the issue?

Hi Nerva,
Thank you for your question, there is a add on I have been recommended to custom set up of opening windows in new monitors. It's called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master].
However, in regards to the session remembering which monitor the window was open in, in the profile folder there is a file that stores window positions and dimensions. It is called localstore.rdf.
Please stay tuned for more investigation, as there are definitely bugs on file for similar issues. Pinpointing it is the hard part.

HT1918 I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

I am trying to enter the No. Of my VISA card (which I normaly use for payments) in the billing info of my account and it is not accepted. Does anyone have any idea why?

JarleEkanger wrote:
How about this? Use Delete array subset to extract chunks for averaging, and a shift register to retain the remaining array.
It is typically not advisable to use "delete from array" in a tight loop. The constant memory reallocations due to array resizing are probably inefficient.
Here's one simple way to do it..
(If the number of points is not divisible by 10, the excess tail is discarded. You can easily modify that behavior if desired.)
LabVIEW Champion . Do more with less code and in less time .
Attachments:
averages of 10.png ‏5 KB
averages of 10.vi ‏9 KB

Which cable should use for Sony DV connect to iMac ?

Which cable should use for Sony DV(IEEE 1394)connect to iMac ?

If your iMac has just the FireWire 800 connection, you will need the 9 pin to 4 pin cable.
http://www.cwol.com/firewire/firewire-800-1394b-cables.htm
If your iMac has the FireWire 400 connection, you will need the 6 pin to 4 pin cable.
http://www.radtech.us/Products/ProCableFW400800.aspx
Links are to illustrate examples. You should be able to pick them up at most computer stores.

I have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.

have a Comcast system and am going through a Bose amp for sound. The comcast box has an HDMI port which I've used for the Apple TV connection. Nothing works! Help.

Thanks. Thought that would be the solution but for my wall mounted TV it's going to be a problem but many thanks for your reply.....

Which function is used for adding days to given month

which function is used for adding days to given month

Hi Jagrut,
Good ... Check out the following examples
Get a date
DATE_GET_WEEK Returns week for a date
WEEK_GET_FIRST_DAY Returns first day for a week
RP_LAST_DAY_OF_MONTHS Returns last day of month
FIRST_DAY_IN_PERIOD_GET Get first day of a period
LAST_DAY_IN_PERIOD_GET Get last day of a period
RP_LAST_DAY_OF_MONTHS Determine last day of month
Date calculations
DATE_COMPUTE_DAY Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_IN_FUTURE Calculate a date N days in the future.
RP_CALC_DATE_IN_INTERVAL Add days/months to a date
RP_CALC_DATE_IN_INTERVAL Add/subtract years/months/days from a date
SD_DATETIME_DIFFERENCE Give the difference in Days and Time for 2 dates
MONTH_PLUS_DETERMINE Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
DATE_CREATE Calculates a date from the input parameters:
Example: DATE_CREATE
CALL FUNCTION 'DATE_CREATE'
EXPORTING
 anzahl_jahre = 1
 anzahl_monate = 2
 anzahl_tage = 3
 datum_ein = '20010101'
IMPORTING
 datum_aus = l_new_date.
 Result:
 l_new_date = 20020304
Example: MONTH_PLUS_DETERMINE
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
months = -5 " Negative to subtract from old date, positive to add
olddate = sy-datum
IMPORTING
NEWDATE = new_date.
write: / new_date.
Hollidays
HOLIDAY_GET Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HOLIDAY_CHECK_AND_GET_INFO Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the
date is a holiday by checking the parameter HOLIDAY_FOUND.
Example: HOLIDAY_CHECK_AND_GET_INFO
data: ld_date like scal-datum default sy-datum,
 lc_holiday_cal_id like scal-hcalid default 'CA',
 ltab_holiday_attributes like thol occurs 0 with header line,
 lc_holiday_found like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
 date = ld_date
 holiday_calendar_id = lc_holiday_cal_id
 WITH_HOLIDAY_ATTRIBUTES = 'X'
IMPORTING
 HOLIDAY_FOUND = lc_holiday_found
tables
 holiday_attributes = ltab_holiday_attributes
EXCEPTIONS
 CALENDAR_BUFFER_NOT_LOADABLE = 1
 DATE_AFTER_RANGE = 2
 DATE_BEFORE_RANGE = 3
 DATE_INVALID = 4
 HOLIDAY_CALENDAR_ID_MISSING = 5
 HOLIDAY_CALENDAR_NOT_FOUND = 6
 OTHERS = 7.
if sy-subrc = 0 and
 lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
Checking dates
DATE_CHECK_PLAUSIBILITY Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
Converting dates
DATE_CONV_EXT_TO_INT Conversion of dates to SAP internal format e.g. '28.03.2000' -> 20000328 Can also be used to check if a date is valid ( sy-subrc <> 0 )
Function to return literal for month
he table you want to use is T247. You can also use the function MONTH_NAMES_GET.
You can also try table T015M. It has the month number in it's key.
Formatting
DATUMSAUFBEREITUNG Format date as the user settings
Other
MONTH_NAMES_GET It returns all the month and names in repective language.
Good Luck and thanks
AK

Is there a custom function available which can be used for logging errors captured in a sp in a sql table

Is there a custom function available which can be used for logging errors captured in a sp during and after execution in a sql table?
Basically we would like to utilize such function in every sp and log errors of each sp in a error log table
Mudassar

Thanks .
I was able to write this however I am thinking I am missing something
CREATE FUNCTION testfunction1()
RETURNS @temp_error TABLE (
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
AS
BEGIN
insert @temp_error(procedure_name,line_number,error_number,error_message,error_state,error_severity)
select error_procedure(),error_line(),error_number(),error_message(),error_state(),error_severity()
RETURN;
END;
CREATE TYPE test_type AS TABLE(
id int identity(1,1),
procedure_name varchar(255),
line_number int,
error_number int,
error_message varchar(max),
error_state int,
error_severity int,
occurence_datetime datetime default current_timestamp,
user_name sysname default suser_name(),
login_name sysname default suser_name()
GO
create proc usp_error_test
@test_type AS test_type READONLY
as
begin
begin try
select 1/0
end try
begin catch
select * from testfunction1(@test_type)
end catch
end
Mudassar

Which frame is used for movie preview?

Which frame is used for a home movie preview, takin with an iPhone 4s? I guess the question is, is there a way to specify the frame of the movie which is used for the preview?
-Thanks

I would have a look at
Gallery
Demo or at the site of a friend of mine
http://www.schutte.name

What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

What is the best method to use for revealing the text on a jpg (as though the text is drawing itself?) Thanks.

tacbob wrote:
Are there any tutorials? I cannot find anything close.
http://itunes.apple.com/de/podcast/write-on-effects-in-motion/id287113664?i=4883 4057
The MacBreak Podcasts are an excellent source of info!
Have a look on the others ..

Which method is used for event creation

Similar Messages

Maybe you are looking for