Howto register a new host via backend

Hi together,
Does somebody know how to do the following in a supported way via backend?
Manual Step:+
- logon to Oracle Applications Manager (OAM)
- navigate to Site Map --> Hosts --> Register
- add a new host by providing name & platform (optionally description)
This will add a new & valid entry to FND_NODES.
Is there any option to do the same in silent mode with a default script/tool/api via backend script?
Need that as pre-step for a “special” cloning/refresh feature to add a new physical host for CM in an instance configured against a virtual host.
11.5.10.2 / ATG RUP6 / 11gR2 / NON-RAC
Thanks,
Claudius

Mainly I follow up "Implementing Virtual Host... on Oracle Applications 11i ATG RUP6 [ID 568115.1]"
So far I can handle all via script except step "2.3 - Modify the setup for Concurrent Processing", where I have to add a host manually via OAM.
Question is about doing this special step via Backend instead of Frontend.The steps under this task can be done by editing the application context file and run AutoConfig. You may also need to purge FND_NODES table and re-populate it as per the docs.
Thanks,
Hussein

Similar Messages

Showmount: new-host: RPC: Program not registered

I always have problem shutting down my solaris system, anytime i issue the shutdown command i always get this error "showmount: new-host: RPC: Program not registered" and the system dows not shutdown instead reboots.
bash-3.00$ su
Password:
# shutdown
Shutdown started. Wednesday, March 5, 2008 12:03:30 PM EST
Broadcast Message from root (pts/3) on new-host Wed Mar 5 12:03:30...
The system new-host will be shut down in 1 minute
showmount: new-host: RPC: Program not registered
Broadcast Message from root (pts/3) on new-host Wed Mar 5 12:04:00...
The system new-host will be shut down in 30 seconds
showmount: new-host: RPC: Program not registered
Do you want to continue? (y or n):

I think the shutdown command executes "showmount" as part of its execution process and if the nfs deamon is not running at that time, it produces this error. If you just execute "showmount", you'll see the same problem. Check this page:
http://access1.sun.com/FAQSets/Solarisx86FAQs.html#14
You should execute shutdown with some parameters:
# shutdown -i0 -g0 -y
-y : non-interactive shutdown
-i0 : init state 0 (for shutdown)
-g0 : grace period in seconds (0 for immediate, 60 by default)

How to register a new responsibility in apps through backend. please give me the full details about it

how to register a new responsibility in apps through backend. please give me the full details about it

Hi,
From backend you can add a responsibility to a user using FND_USER_PKG package, and there are so many hit in the google. Let me point out 1:
http://manoharbabuapps.blogspot.com/2013/08/how-to-add-responsibility-from-back-end.html
I personally dont know of any API where you can create a responsibility from backend, but from front end you can create. Steps detailed in following link:
Oracle Applications: creating responsibility in oracle apps R12
Thanks &
Best Regards,
Asif

I changed my website's host and although I can access all existing mail and folders via the cpanel at my new host, my PC account now doesn't show the folders?

I had to change the details of my mail accounts to the new mail server details of the new host and also the port. All files have been deleted off the previous server.
I did have a lot of folders with emails stored and I can access these through the mail option on my new host's cpanel. However, they have disappeared from my still existing version of TB that I have running on my PC.
I did do a back up copy a few weeks ago but I don't know how to reinstall that. I also figure if it exists on the new server / host, there may be a way to 'pull them back in' to my existing profile?
Thanks in advance for any help :-)
Kym

I'd suggest to check with your service provider about their IMAP server. It's functionality may be limited, or you may need to configure something on the server.

How can I register my new ipad air?

How do I register my new ipad air?

You can register its serial number to your iTunes account via : https://supportprofile.apple.com/
Is that what you mean ?

Can not register a new machine with Updatemanager

Hi,
I just install a new machine with Solaris 10 using a Flash image and Live Upgrade. The original machine from we create the Flash image was registered succesfull using Update Manager.
Now, when I try to register the new machine, the applications ask me the user and password, but do not makes anything. The dialog freeze. The only way to stop the Update Manager is killing them (at the end is the full java error stack).
I try with sconadm,
sconadm register -a -r /var/tmp/registration.profile
Unsuccessfull too, with the same stack error (Caused by: javax.management.InstanceNotFoundException: ).
I'm bored with the Solaris patch system: all the weekend was saying error 500 for all my other registered machines, and now I can not register a new machine....
This system fails all the time.. Is runing under W2K3 server???
Any Idea?
Thanks in advance.
H.
P.S: Error stack output:
Exception occurred during event dispatching:
java.lang.reflect.UndeclaredThrowableException
        at $Proxy1.getInstanceName(Unknown Source)
        at com.sun.scn.client.SCNClientSession.login(SCNClientSession.java:371)
        at com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter.loginAccount(ClientLoginCacaoAdapter.java:209)
        at com.sun.cns.basicreg.wizard.cli.CmdLineWizard.outCall(CmdLineWizard.java:1109)
        at com.sun.cns.basicreg.wizard.cli.CmdLineWizard.output(CmdLineWizard.java:773)
        at com.sun.cns.basicreg.wizard.swing.WizardPanel.isNavigationAllowed(WizardPanel.java:1337)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog.okByNavigationListener(WizardDialog.java:583)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog.access$100(WizardDialog.java:64)
        at com.sun.cns.basicreg.wizard.swing.WizardDialog$NextButtonActionListener.actionPerformed(WizardDialog.java:404)
        at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
        at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
        at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
        at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
        at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
        at java.awt.Component.processMouseEvent(Component.java:5517)
        at javax.swing.JComponent.processMouseEvent(JComponent.java:3135)
        at java.awt.Component.processEvent(Component.java:5282)
        at java.awt.Container.processEvent(Container.java:1966)
        at java.awt.Component.dispatchEventImpl(Component.java:3984)
        at java.awt.Container.dispatchEventImpl(Container.java:2024)
        at java.awt.Component.dispatchEvent(Component.java:3819)
        at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
        at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
        at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
        at java.awt.Container.dispatchEventImpl(Container.java:2010)
        at java.awt.Window.dispatchEventImpl(Window.java:1791)
        at java.awt.Component.dispatchEvent(Component.java:3819)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:153)
        at java.awt.Dialog$1.run(Dialog.java:535)
        at java.awt.event.InvocationEvent.dispatch(InvocationEvent.java:209)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:461)
        at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
Caused by: javax.management.InstanceNotFoundException: com.sun.scn:name=SCNBaseServiceFactory,assetSubProfile=Factory,host=alcaudon.tsc.uc3m.es,assetProfile=Factory,scnType=ServiceFactory,Vendor=Sun Microsystems Inc
        at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getMBean(DefaultMBeanServerInterceptor.java:1010)
        at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:1349)
        at com.sun.jmx.mbeanserver.JmxMBeanServer.getClassLoaderFor(JmxMBeanServer.java:1300)
        at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.getClassLoaderFor(DefaultMBeanServerInterceptor.java:285)
        at com.sun.cacao.agent.DispatchInterceptor.getClassLoaderFor(DispatchInterceptor.java:548)
        at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.getClassLoaderFor(AccessControlInterceptor.java:427)
        at com.sun.jdmk.JdmkMBeanServerImpl.getClassLoaderFor(JdmkMBeanServerImpl.java:1130)
        at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.getClassLoaderFor(InstrumDefaultForwarder.java:153)
        at javax.management.remote.rmi.RMIConnectionImpl$4.run(RMIConnectionImpl.java:1308)
        at java.security.AccessController.doPrivileged(Native Method)
        at javax.management.remote.rmi.RMIConnectionImpl.getClassLoaderFor(RMIConnectionImpl.java:1305)
        at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:768)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:585)
        at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
        at sun.rmi.transport.Transport$1.run(Transport.java:153)
        at java.security.AccessController.doPrivileged(Native Method)
        at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
        at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
        at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
        at java.lang.Thread.run(Thread.java:595)
        at sun.rmi.transport.StreamRemoteCall.exceptionReceivedFromServer(StreamRemoteCall.java:247)
        at sun.rmi.transport.StreamRemoteCall.executeCall(StreamRemoteCall.java:223)
        at sun.rmi.server.UnicastRef.invoke(UnicastRef.java:126)
        at com.sun.jmx.remote.internal.PRef.invoke(Unknown Source)
        at javax.management.remote.rmi.RMIConnectionImpl_Stub.invoke(Unknown Source)
        at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:972)
        at javax.management.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:201)
        ... 39 more

Well,
The problem was a Memory problem: The swap file was misconfigured. Once the system reboots with the correct swap configuration I was able to register the machine.
Anyway, the problem to connect with SunSolve is continous, but it is other point of discussion.
I hope this solution can help people with similar problems.
H.

What are the highlevel steps for changing to a new R/3 backend in SRM 7.0?

Hi,
I need confirmation of the highlevel steps required for changing to a new R/3 backend system in a SRM 7.0 server?
Our scenario is that we want to switch from an old R/3 backend to a new R/3 backend (both ECC 6.0). From what I can read from SAP Note 995771 the following steps would have to be conducted, only I don't know if all are valid or complete for SRM 7.0 as well?
1. Create new RFC connection for new R/3 backend system in SM59 ( in SRM system.)
2. Create new RFC connection for SRM system in SM59 (in new R/3 backend system).
3. Define Logical System for the new R/3 backend system (in SRM system).
4. Define Logical System for the SRM server (in new R/3 backend system)
5. Define System Landscape for new Logical System and RFC connection (in SRM system).
6. Adjust settings in Define Backend system for Product Category. (in SRM system)
6. Run BDLSS (in SRM system)
7. Run BDLSS (in new R/3 backend system).
8. Control BDLSS results via report ZSCAN_LOGSYS (in SRM system)
9. Control BDLSS results via report ZSCAN_LOGSYS (in new R/3 backend system)
10. Maintain ALE-Distribution Model and Distribute Views for new R/3 backend. (in SRM System)
11. Verify ALE-Distribution Model and Distributed view for SRM system (in new R/3 backend system)
12. Generate/Control Partner functions in WE20 for IDOC processing (in SRM System)
13. Generate/Control Partner functions in WE20 for IDOC processing (in new R/3 backend system)
14.Adjust the site attributes in transaction SMOEAC (in SRM System)
15. Adjust Table CRMRFCPAR (in new R/3 backend system)
16. Adjust Table CRMCONSUM (in new R/3 backend system)
17. Adjust Table CRMSUBTAB (in new R/3 backend system)
18. Adjust Table CRMPAROLTP (in new R/3 backend system)
19. Adjust Table SMOFPARSFA (in SRM system)
20. Run report RHOMATTRIBUTES_REPLACE to replace attributes still having the old logical system assigned in the organization model.
Are there any relevant steps missing? (I will of course take care of master data, number ranges etc)
Thanks in advance for your responses,
BR Jakob

Hi,
Solution Manager has some documents. or check help.sap.com.
http://help.sap.com/saphelp_nw70/helpdata/en/39/a1bb5c4c0d4ab4a417e87ef35f1efa/frameset.htm
When you create a custom task, you should add the task ID to the UWL configuration.
Portal, Administration -> System configuration -> UWL Administration -> Click to Manage Item Types and View Definitions. Select Configuration "com.sap.pct.srm.core"; and download the configuration. Edit the configuration copy the task block and add new task ID. Upload the configuration.
Regards,
Masa

How to re-register to new Apple ID

I just registered my new iPad and inadvertently registered it under my wife's Apple ID. How can I designate a new Apple ID for it?

"Not true."
Yes, true.
"They are associated via iTunes and an aaociation lasts for 90 days. This is especially relevant with iCloud."
It's no "especially relevant with iCloud". It is ONLY relevant for using iCloud.
Regardless, it is not what the OP was asking about.

How to register a new docicon/progid using CSOM/SharePoint Client object model

I know how to register a new file-type icon in SharePoint 2013 by modifying docicon.xml,
but is it possible via any sort of web-based API? Specifically I'm trying to do it for a SharePoint Online/office 365 site.

Hi Dylan,
For SharePoint Online, the docicon.xml is stored in the SharePoint online Server and there is no such Web API could modify the xml file directly, so there is no easy way to achieve it.
As a workaround, you can add some JavaScript and Jquery in the master page to modify the file type icon to the new one.
<script>
var IMGs = document.getElementsByTagName("IMG")
for (var i=0; i<IMGs.length; i++)
var alt=IMGs[i].alt;
if (alt.substring(alt.length-4,alt.length)==".pdf")
IMGs[i].src="/yourlibrary/yourimage.gif";
</script>
Here is a similar thread for your reference:
https://social.technet.microsoft.com/forums/msonline/en-US/bf5ff648-eefb-4084-8204-9519efaf50e7/modifying-dociconxml-on-sharepoint-online
Best Regards
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Zhengyu Guo
TechNet Community Support

Difference betweek adding node via Sysadmin and adding host via OAM

We have cluster setup at DB node in EBiz 11.5.10.2. After running autoconfig we have to manually add physical host entry in FND_NODES table. We do this via sysadmin > Install > Nodes. But I have seem some difference when we add node via OAM > add new host and sysadmin > install > nodes. Specially if you add host via OAM, it add support_CP value along with hostname, same doesn't happen if you do via sysadmin.
Did anyone know technical difference between these two approach.

Here is the X server backtrace I get when I try to open an image in GIMP:
Backtrace:
0: /usr/bin/X(xorg_backtrace+0x3b) [0x813017b]
1: /usr/bin/X(xf86SigHandler+0x51) [0x80d8cb1]
2: [0xb7fde400]
3: /usr/lib/xorg/modules//libexa.so [0xb7a07f4c]
4: /usr/lib/xorg/modules//libexa.so(exaComposite+0x607) [0xb7a08747]
5: /usr/bin/X [0x8175e5d]
6: /usr/bin/X(CompositePicture+0x19a) [0x815e86a]
7: /usr/bin/X [0x810ef9a]
8: /usr/bin/X [0x811f20d]
9: /usr/bin/X(miPointerUpdateSprite+0x1ac) [0x8118aec]
10: /usr/bin/X [0x8118bd5]
11: /usr/bin/X [0x8145948]
12: /usr/bin/X [0x81691ee]
13: /usr/bin/X [0x809378f]
14: /usr/bin/X [0x8098611]
15: /usr/bin/X(miSlideAndSizeWindow+0x24e) [0x812734e]
16: /usr/bin/X(ConfigureWindow+0xab3) [0x8078763]
17: /usr/bin/X(ProcConfigureWindow+0x9c) [0x808b7ac]
18: /usr/bin/X(Dispatch+0x34f) [0x808c20f]
19: /usr/bin/X(main+0x47d) [0x8071c8d]
20: /lib/libc.so.6(__libc_start_main+0xe5) [0xb7beb6c5]
21: /usr/bin/X [0x8071071]

Error while registering a new repository on Data Services 4.0

Hi all,
I've a BO Enterprise Platform 4.0 + Data Services 4.0 installation, and I'm trying to register a new local repository in addition to the installation default one. I followed these steps:
1) Create a new database schema for the repository
2) Created the local repository with repository manager
3) Created a new job server associated with the new repository through the server manager
4) Tried to register the new repository in the CMC
I wasn't able to complete the step 4 since i got the following error "unable to connect to profile server".
Any clue?
Thank you very much
Pietro
Edited by: Pietro Castelli on Jan 30, 2012 12:03 PM

what is the complete version of DS 4.0 ? also check the REPO_TYPE in AL_VERSION table, for local repo this will be NULL

ITunes asks me to register my new iPad every time I open it

I just bought a new iPad a few weeks a go and registered it on my mac the very day. But ever since iTunes keeps asking me to register my new iPad. I checked, My Support Profile, and Apple has the New iPad's serial number registered with my account. Any one come across this problem?

Don't know if this brings you any comfort, but I just got mine today, and am getting the same problem. Also, when I run diagnostics, it says it can't find the IPod - but the thing did sync and does work. I also checked to see if it was registered on the Apple site, and it is.

I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on external drive. I'd like to migrate only the internal hard drive data to the new internal Drive then just plug in iPhoto library drive. Is this going be a problem?

I am migrating to a new iMac via TimeMachine back up. My iPhoto libraries are on an external drive. Both drives are backed up on Time Machine. I'd like to migrate only the old internal hard drive data to the new internal Drive and then just plug in iPhoto library drive to the new iMac. This would save having to transfer several hundred GBs of data. Will this work using Set Up Assistant?

Your user account on the new Mac must have a different UID than on the old one. See the pink box in Problems after using Migration Assistant for an explanation.
You'll need to change the permissions on the iPhoto library on the external HD. Do a Get Info on it, click the padlock at the bottom of the Sharing & Permissions section of the Info window and enter your Admin password.
Then click the plus sign, select the user account you want on the next screen, and click Select. Then change Read only to Read & Write for that user via the little arrows. Finally, click the "gear" icon and select Apply to enclosed items. That may take a few mintutes on a large library.

[HELP] Problem with restore and recovery to new host

Hi, guys!
I have been trying for two days, but still cannot get it to work.
I have taken a full hot(online) backup with archive logs as well as the control file and SPFILE, and then copied the backup to the new host with the same directory structure and settings. Finally, I have tried to restore & recover the database on the new host but failed during the restore process.
Both the original host and the new host have the same Oracle installed down to the patch level. I couldn't figure out the proper solution to this problem base on my limited knowledge about Oracle DB.
Could anyone help me out here? Any advice would be appreciated!
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATADATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 11:41:33
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Here is some extra information that you might want to know about:
RMAN> list incarnation;
List of Database Incarnations
DB Key Inc Key DB Name DB ID STATUS Reset SCN Reset Time
1 1 PRODDB 3774691295 PARENT 1 17-APR-07
2 2 PRODDB 3774691295 PARENT 521803 06-OCT-11
3 3 PRODDB 3774691295 PARENT 1595143 20-OCT-11
4 4 PRODDB 3774691295 PARENT 1600974 20-OCT-11
5 5 PRODDB 3774691295 PARENT 1952053 27-OCT-11
6 6 PRODDB 3774691295 CURRENT 2146951 07-NOV-11
RMAN> list backup recoverable;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
37 Full 822.34M DISK 00:29:47 07-NOV-11
BP Key: 37 Status: AVAILABLE Compressed: NO Tag: TAG20111107T175037
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BKP
List of Datafiles in backup set 37
File LV Type Ckp SCN Ckp Time Name
1 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSTEM01.DBF
2 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\UNDOTBS01.DBF
3 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\SYSAUX01.DBF
4 Full 2149673 07-NOV-11 D:\DBDATA\PRODDB\USERS01.DBF
5 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA01.DBF
6 Full 2149673 07-NOV-11 D:\ORA_DATA\DATA02.DBF
7 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX01.DBF
8 Full 2149673 07-NOV-11 D:\ORA_DATA\INDX02.DBF
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
SPFILE Included: Modification time: 07-NOV-11
BS Key Size Device Type Elapsed Time Completion Time
39 18.46M DISK 00:00:05 08-NOV-11
BP Key: 39 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093359
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\BACKUPSET\
2011_11_08\O1_MF_ANNNN_TAG20111108T093359_7CJY7TG1_.BKP
List of Archived Logs in backup set 39
Thrd Seq Low SCN Low Time Next SCN Next Time
1 1 2146951 07-NOV-11 2149493 07-NOV-11
1 2 2149493 07-NOV-11 2149519 07-NOV-11
1 3 2149519 07-NOV-11 2149565 07-NOV-11
1 4 2149565 07-NOV-11 2149641 07-NOV-11
1 5 2149641 07-NOV-11 2172859 07-NOV-11
1 6 2172859 07-NOV-11 2197851 07-NOV-11
1 7 2197851 07-NOV-11 2220349 08-NOV-11
1 8 2220349 08-NOV-11 2222621 08-NOV-11
1 9 2222621 08-NOV-11 2222729 08-NOV-11
1 10 2222729 08-NOV-11 2223088 08-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
SPFILE Included: Modification time: 08-NOV-11
Thanks in advance!
Jay

Thank you for your reply,Hemant K Chitale!
>
a) Does the directory structur exist on the new server :
D:\DBDATA\PRODDB\ --- for files 1 to 4
D:\ --- for file 5
D:\ORA_DATA\ --- for files 6 to 8
>
Yep, I have doubled check the directory structure that get in the way, and they are all exist.
Would it be something to do with the folder permissions?
>
b) Apparently a RESETLOGS has been issued on 07-Nov. Which controflile backup do you have restored and mounted on the new server ? It should be the one after the RESETLOGS.
>
I restored the one included with the backup. Should I take another backup of controlfile seperately and restore from it instead?
>
(I assume that you did a RESTORE CONTROLFILE followed by sql "alter database mount" before the attempt to RESTORE DATABASE)
>
Yep, that's exactly what I did.
//executed @ RMAN prompt of the new host
startup nomount; 'the new host has the right SPFILE to start with so i didn''t bother to RESTORE SPFILE first.
restore controlfile from autobackup;
alter database mount;
restore database sequence 10 thread 1;
//get stucked here with RMAN-06026, 06023
//...the following is not executed yet.... :-(
recover database until sequence 10;
alter database open resetlogs;Edited by: HappyJay on 2011/11/08 13:25
I have made several attemps with your advice, but still get the same type of errors.
Here is the output:
RMAN> list backup of controlfile;
List of Backup Sets
===================
BS Key Type LV Size Device Type Elapsed Time Completion Time
38 Full 6.95M DISK 00:00:03 07-NOV-11
BP Key: 38 Status: AVAILABLE Compressed: NO Tag: TAG20111107T182034
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
\2011_11_07\O1_MF_S_766606834_7CH8Q439_.BKP
Control File Included: Ckp SCN: 2151141 Ckp time: 07-NOV-11
BS Key Type LV Size Device Type Elapsed Time Completion Time
40 Full 6.95M DISK 00:00:00 08-NOV-11
BP Key: 40 Status: AVAILABLE Compressed: NO Tag: TAG20111108T093411
Piece Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP
+\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP+
Control File Included: Ckp SCN: 2223097 Ckp time: 08-NOV-11
as you suggested, this backup piece of controlfile should be right one to be restored.
RMAN> shutdown;
database dismounted
Oracle instance shut down
RMAN> startup nomount;
connected to target database (not started)
Oracle instance started
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 364907424 bytes
Database Buffers 121634816 bytes
Redo Buffers 2899968 bytes
RMAN> restore controlfile from autobackup;
Starting restore at 08-NOV-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=157 devtype=DISK
recovery area destination: C:\oracle\product\10.2.0\flash_recovery_area
database name (or database unique name) used for search: PRODDB
channel ORA_DISK_1: autobackup found in the recovery area
channel ORA_DISK_1: autobackup found: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AR
EA\PRODDB\AUTOBACKUP\2011_11_08\O1_MF_S_766661651_7CJY84LK_.BKP
channel ORA_DISK_1: control file restore from autobackup complete
output filename=D:\DBDATA\PRODDB\CONTROL01.CTL
output filename=D:\DBDATA\PRODDB\CONTROL02.CTL
output filename=D:\DBDATA\PRODDB\CONTROL03.CTL
Finished restore at 08-NOV-11
tried shutdown normally and mount again instead.
RMAN> shutdown;
Oracle instance shut down
RMAN> exit
Recovery Manager complete.
C:\>rman target /
Recovery Manager: Release 10.2.0.3.0 - Production on Tue Nov 8 13:49:42 2011
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup mount;
Oracle instance started
database mounted
Total System Global Area 490733568 bytes
Fixed Size 1291360 bytes
Variable Size 369101728 bytes
Database Buffers 117440512 bytes
Redo Buffers 2899968 bytes
RMAN> restore database until sequence 10 thread 1;
Starting restore at 08-NOV-11
Starting implicit crosscheck backup at 08-NOV-11
using target database control file instead of recovery catalog
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=156 devtype=DISK
Crosschecked 3 objects
Finished implicit crosscheck backup at 08-NOV-11
Starting implicit crosscheck copy at 08-NOV-11
using channel ORA_DISK_1
Crosschecked 2 objects
Finished implicit crosscheck copy at 08-NOV-11
searching for all files in the recovery area
cataloging files...
cataloging done
List of Cataloged Files
=======================
File Name: C:\ORACLE\PRODUCT\10.2.0\FLASH_RECOVERY_AREA\PRODDB\AUTOBACKUP\2011_11_
08\O1_MF_S_766661651_7CJY84LK_.BKP
using channel ORA_DISK_1
channel ORA_DISK_1: starting datafile backupset restore
channel ORA_DISK_1: specifying datafile(s) to restore from backup set
restoring datafile 00001 to D:\DBDATA\PRODDB\SYSTEM01.DBF
restoring datafile 00002 to D:\DBDATA\PRODDB\UNDOTBS01.DBF
restoring datafile 00003 to D:\DBDATA\PRODDB\SYSAUX01.DBF
restoring datafile 00004 to D:\DBDATA\PRODDB\USERS01.DBF
restoring datafile 00005 to D:\ORA_DATA\DATA01.DBF
restoring datafile 00006 to D:\ORA_DATA\DATA02.DBF
restoring datafile 00007 to D:\ORA_DATA\INDX01.DBF
restoring datafile 00008 to D:\ORA_DATA\INDX02.DBF
channel ORA_DISK_1: reading from backup piece C:\ORACLE\PRODUCT\10.2.0\FLASH_REC
OVERY_AREA\PRODDB\BACKUPSET\2011_11_07\O1_MF_NNNDF_TAG20111107T175037_7CH6YYVJ_.BK
P
failover to previous backup
//however, still get the same results(ended up with errors)
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 11/08/2011 13:50:29
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
Edited by: HappyJay on 2011/11/08 13:59

Need help on how to help my sister register her new nano and add music to it on my computer. I have my on nano already on my computer registered and set up but she and I don't listen to the same music so how would I go about doing this?

I'm trying to find out information on how to go about helping my sister to register her new nano and load on CD's and such. I have a nano and already know how to do this but she is from CA and we want to load it here on my computer. She will be going home in 2 weeks and wants to use it in the car for the ride home.We don't listen to the same kind of music so I don't want to use my library but do one of her own for her. Also she will want to add this library on to her computer at home. I'm 60 and my sister is 70 I have enough knowledge to do some things on the computer but am not real computer smart. My sister is just learning about everything but has no idea what to do with that knowledge. Can anyone give me and idea on how to do this that I can get a grasp of what needs to be done to do this? My nephew says it's easy but he's in Az and I'm here. He also helps people with computers so he is more knowledgeable than I am. Would appreciate any help on this. thx

See the procedures below for removing a device from Find My iPhone when you can't do it on the device itself.
iCloud: Remove your device from Find My iPhone

Howto register a new host via backend

Similar Messages

Maybe you are looking for