HP 4100mfp no display, no printing, fans only spin

I have a customer that has a HP 4100mfp that acts like it is dead. You flip on the power switch and the fan spins like it is going to power up, but the display never comes on. Opening and closing doors don't make the machine cycle. I've reseated the hard drive, memory, formatter, disconnected scanner, removed toner cartridge, removed the JetDirect 615, and nothing made any change. The tech support center I called said it could be a list of things, and he wasn't sure what to tell me. He recommended starting at the power supply.
The said that the display has been on for a week, but it still printed. Well, it stopped printing now, hence the service call. I pressed the engine test print switch, and nothing happens. Does anyone have any recommendations other than a possible power supply? Thanks!
Ryan Markwald
[email protected]

Will be trying the Engine Control Board to see if it fixes it.
Ryan Markwald
[email protected]

Similar Messages

In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

In my macbook pro 15 inch mid 2012 model, my cpu and gpu will get very hot, when gaming or rendering sometimes over 200F. The fans only spin at max about 2900 rpm, when their max is 6400. I downloaded a fan control app, but how can i fix it?

Hi rhaughan,
I see that you have concerns about your operating temperature of your computer while using resource-heavy applications such as gaming applications. I have an article that will address some of the concerns you have mentioned:
Mac notebooks: Operating temperature - Apple Support
http://support.apple.com/en-is/HT201640
While there are third-party utilities that measure the temperature of a notebook computer, it is important to understand that these utilities are not measuring the external case temperature. The actual case temperature is much lower. Never use third-party applications to diagnose possible hardware issues—instead, contact Apple or go to an Apple Retail Store or Apple Authorized Service Provider.
You should also see this article for even further information about your fans:
Learn about the fans in your Mac - Apple Support
http://support.apple.com/en-is/HT202179
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

How to display and print CCR showing not only results, high, low or normal, but also normal ranges of tests.

How do I display and print CCR showing not only my actual results, high, low or normal results, but also normal ranges of each test? I can do this individually but not for the composite CCR.
Thanks.

Hi,
I'm not exactly clear on what you are doing. I can tell you that the ranges and flags for high, low, and normal come from the lab results provider in the lab results they sent you, not from HealthVault. If you go back to the original document that came from
the laboratory, you should be able to open it as a document and print it.
I hope this helps. If not, please respond with more details, or if you'd prefer a private conversation, please contact HealthVault customer support by opening a support ticket with them.
Thanks,
Kathy

HP Officejet Pro 8500A Plus stalls displaying "Now Printing".

Hi, in the office i work in we have 2 HP Officejet Pro 8500 A910 Series. One is networked to 3 PC's running WIndows 7 and the other is connected via wifi to a PC also running Windows 7.
The problem is the printer that is networked often stalls displaying "now printing" on the printer screen. The only way to continue printing is to turn the computer off and then on again, wait for it to do its cleaning etc then press print again. This is usually ok for that print job but as soon as further print jobs are added it has to be reset and the whole cycle repeats endlesly throughout the day. Until recently the other printer that is connected via wifi was working fine but now that is also doing exactly the same thing described above.
Recently i searched the forums and have discovered this is a common problem with this type of printer.
I have done partial and full resets of both printers to no avail.
Bothe printers are currently using firmware version: LRP1FN1126AR , which i believe is the latest firmware.
Please can someebody explain how to make these printers work properly? Many thanks
This question was solved.
View Solution.

ok, i have done the most research into this issue of all people, as i bought 3 of them for buisness.
the most common problem is the printer will only print for 20 or so mins after a reboot, then it goes to sleep,
if attempting print after this time, it will display "now printing" but nothing prints.
after hours to customer support, and a new printer delivered, plug in the expired/refilled genuine cartrige, same issue.
you can wake up the machine tempoarily by opening and closing the cartridge door.
i finally got the lady from HP to admit there is a page count on the chips, and instead of an error on screen,they do this to avoid law suits.she didnt admit to the last bit tho,lol.
i have 3 expired , refilled genuine chips now, all do the same all after around 5000 pages.
cheeky buggers!!
someone with time and money, please sue them , im tired of bieng ripped off.

Tax codes not displaying in print preview.

hello,
i need to display tax codes in the me23n print preview.for that i write a subroutine pool program and fetch the values. but the values are not displayed. i debuged the subroutine pool program, i found that in output structure itcsy, there are no fields. i hope this is the reason for the values not displayed. please help some one how to display values.
coding : in script,
define &g_menge&
define &g_taxcode&
perform get_main_details in program z_mm_po_details
using &ekpo-ebeln&
using &ekpo-ebelp&
changing &g_menge&
changing &g_taxcode&
endperform
in subroutine pool program,
FORM get_main_details TABLES input STRUCTURE itcsy
output STRUCTURE itcsy.

Hello Kiran,
<li> We can display LOGO using REUSE_ALV_GRID_DISPLAY only not using REUSE_ALV_LIST_DISPLAY. So when you click on print preview Grid output is displayed as REUSE_ALV_LIST_DISPLAY output. It is confirmed that using ABAP classical or ALV printing LOGO is not possible.
<li>To print LOGO, you can go for SCRIPTS or SMARTFORMS.
Thanks
Venkat.O

No data display in Print preview for sapscript

Hi All
I have copied a standard sapscript and the driver program (RVADAUS1) and made some minor changes to both.
Now when i print preview it, no data is displayed. I checked in debugger, the data is present till perform WRITE_FORM but is not there in sap script.
Please help!!

The data is coming in driver program..I have debugged both driver prog and the sapscript..The data is present in the driver program in the Read statement just before the write_form function module is called to fill in the data in sapscript..But when i debugged sapscript, the data is not coming there.. even the window boundaries are not printed..Only a single line present in MAin window is being printed. Rest all is empty.

Cannot extract the embedded font 'F2'. Some characters may not display or print correctly.

This question was previously published but no answer has been found.
Error message is :
"Cannot extract the embedded font 'F2'. Some characters may not display or print correctly."
Many pdf documents display this error with Adobe Reader 8.1.0. We have errors for embedded fonts 'F0','F3','F7' and so on.
It looks like a Adobe Reader bug because :
- All PDF files can be opened with Acrobat Reader 5.0.5, 6.x and 7.x, can't be opened with 8.1.0 version.
- the 8.1.1 update removes only the bug for 'F0' error message (issue #1572280).
The solution :
- to publish a 8.1.2 update to fix this important bug
- is there a registry parameter or tool option to disable the checking added in 8.x version of Adobe Reader ? The 8.x version catches more errors to be compliant with Adobe specification but Adobe reader must be
compliant with all documents generated by third party products.
This Adobe Reader bug applies to Windows Vista, XP Pro SP2, 2000.
Thx,
Regards

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

Size & Quality - Exporting Pix from iPhoto for Display and Printing?

I would like to export pictures from iPhoto for use in PowerPoint.
If the pictures are in 4x3 format, exporting them using the "Custom" size option and specifying 1024 as the maximum pixels results in nice 1024 x 768 photos that fill the screen on most projectors. This is good.
The exported photos are also at 72 pixels/inch. This is OK for onscreen display, but not so good for printing.
Oddly, the results are the SAME (1024 x 768, 72 pixels/inch) whether one specifies Low, Med, High or Max quality in the iPhoto export panel -- though the file sizes ARE different (higher quality = larger sizes). (I used Photoshop Elements to identify the sizes of the exported photos).
What gives? I would have thought higher quality files would have been associated with higher resolution (more pixels/inch) but this doesn't seem to be the case, and I don't understand why the file sizes are larger.
Can someone recommend a way to export a batch of photos from iPhoto at a specific size (1024 x 768) and perhaps 300 pixels/inch) that I might use in PowerPoint for both display and printing? And perhaps explain the bloated file sizes with no apparent quality increase?
Many thanks!

Luxesto
Welcome to the Apple user to user assistance forums
If the pictures are in 4x3 format, exporting them using the "Custom" size option and specifying 1024 as the maximum pixels results in nice 1024 x 768 photos that fill the screen on most projectors. This is good.
The exported photos are also at 72 pixels/inch. This is OK for onscreen display, but not so good for printing.
DPI is meaningless for a digital photo until you display it - Dots Per Inch are just a meaningless number - the displayed DPI is the size of the photo in dots (pixels) divided by the inches of the display measures in inches - the DPI setting in the photo means nothing - see The Myth of DPI for a longer discussion on this.
Oddly, the results are the SAME (1024 x 768, 72 pixels/inch) whether one specifies Low, Med, High or Max quality in the iPhoto export panel -- though the file sizes ARE different (higher quality = larger sizes). (I used Photoshop Elements to identify the sizes of the exported photos).
What's odd? you said export with the largest dimension 1024 - that occurred just as you specified - what would be odd would be that the export were different form your specification
What gives? I would have thought higher quality files would have been associated with higher resolution (more pixels/inch) but this doesn't seem to be the case, and I don't understand why the file sizes are larger.
Higher quality means less compression (and therefore larger file size) - it does not mean a difference in compression - JPEGs have a compression from 1 to 12 available - iPhoto does 4 steps - small, medium, large and highest. I've not see the compression documented but I think of it as like 3, 6, 9 and 12
Can someone recommend a way to export a batch of photos from iPhoto at a specific size (1024 x 768) and perhaps 300 pixels/inch) that I might use in PowerPoint for both display and printing? And perhaps explain the bloated file sizes with no apparent quality increase?
Forget the DPI - just be sure the pixel sizes are correct - for printing you should have at least 150 dpi and 300 dpi is better - so at 150 DPI printing your 1024x768 photo can be printed at 6.8" x 5.12 " -- at 300 dpi it would only 3.4" x 2.55"
LN

Alv header logo not displaying in print-preview

Hi all... I had displayed an ALV report with a header and logo init. But when I had clicked on print preview ... every thing is displaying except the logo... How to overcome this...???

Hello Kiran,
<li> We can display LOGO using REUSE_ALV_GRID_DISPLAY only not using REUSE_ALV_LIST_DISPLAY. So when you click on print preview Grid output is displayed as REUSE_ALV_LIST_DISPLAY output. It is confirmed that using ABAP classical or ALV printing LOGO is not possible.
<li>To print LOGO, you can go for SCRIPTS or SMARTFORMS.
Thanks
Venkat.O

Copyright Shown When Printing Topics Only

Hi All,
I'm told that we used to be able to display a copyright
statement only when the user would print topics using WinHelp. The
copyright would not display when viewing.
I'd like to do same thing using RoboHelp HTML Help. Is there
a way to do this?
So far I've explored footers and templates but to no avail.
Any help would be appreciated.
Thanks!
Larry

Hi Pete,
Well, it worked great.
First, on getting the compiled Help file to open up, I had to
run MJs Help Diagnostics to get the DLLs registered properly. I
believe the problems cropped in when I installed Flare -- our new
Help tool.
Then, I was able to get the citation working properly with
your excellent instructions. I placed the following in the style
sheet for each topic.
@media screen
p.copyright { display:none; }
@media print
p.copyright { display:block; }
Unfortunately, the Help system currently uses a number of
style sheets rather than just one, but it still only took a couple
minutes to put that code in each .css file.
Then I added the following to the TrueCode of a template
footer.
<p class="copyright">Copyright © 2008 Scantron
Corporation. All rights reserved. Use permitted only under license.
No part of the Help may be reproduced in any form, or by any means,
without permission from Scantron Corporation. www.scantron.com
I was able to apply this to all 1700 help topics in one fell
swoop. That saved me a lot of work. At first there was a style
sheet associated with the template file. This switched each topic's
style sheet to the template's when I applied the template to some
sample topics. So I removed the .css file association with the
template, and then it worked like a charm.
Thanks again for the insight. I really didn't think that I
had a chance to provide that functionality when QA requested it.
Larry

Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print corr

I have been getting the error....
Cannot extract the embedded font 'EX_CFF_Arial_Black'. Some characters may not display or print correctly.
I have tried to look online to figure this out but I have had no luck. If anyone has any suggestions to fix this I would love to hear them. Thanks!

Just to let you know, for anyone else with this problem. I had this problem occur on a MAC when you tried to do save to PDF in excel. This was all happening at the point of generation of the PDF in my case.
The fix was to delete ALL the microsoft preferences, but perahps only the font cache needed to be deleted.
I deleted the following areas from the local users userprofile on the mac. On windows, I would probably log in as a differnet user to try to see if the problem just exsists for one particular user.
Here are the sections I deleted:
Library/caches/metadata/Microsoft*
Username/library/preferences/com.microsoft* ( and anyhting with microsoft in it)
I did leave the entourage settings though.
hope it helps someone with a similar issue.

How to display the Print Dialog with defined print presets included.

When I try and display the Print Dialog none of my defined print presets are included in the print preset list box, I only get the [custom] option.
How can I get the presets included in the list?
The code I am using is:
InterfacePtr<IPrintData> docPrintData(document->GetDocWorkSpace(), UseDefaultIID());
// create a temp non-persistent IPrintData
IPrintData* tempPrintData(CreateObject2<IPrintData>(kPrintDataBoss));
// copy data from the document workspace
tempPrintData->CopyData(docPrintData, kTrue);
InterfacePtr<ICommand> printDialogCmd(CmdUtils::CreateCommand(kPrintDialogCmdBoss));
InterfacePtr<IPrintDialogCmdData> printDialogCmdData(printDialogCmd, IID_IPRINTDIALOGCMDDATA);
// store off the document's UIDRef in the print data boss
UIDRef docUIDRef = ::GetUIDRef(document);
printDialogCmdData->SetDocUIDRef(docUIDRef);
printDialogCmdData->SetPrintData(tempPrintData);
ErrorCode result = CmdUtils::ProcessCommand(printDialogCmd);
tempPrintData->Release();
Thanks

You can set the presets with Adobe Acrobat.

HT3669 I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

I have an HP deskjet color printer that only prints in black and white from my mac ... how do I get it to print in color

Check the printer itself. Some printers you need to set the color & B&W settings on the printer itself instead of the Mac. If that is not the case w/your printer, contact HP tech support and/or post in their forums if they have one.

How do I set up my printer to only print in black?

how do I set up my printer to only print in black?

Please read this post then provide some details. What printer model? What operating system? Depending on your printer model you might remove the color cartridge, forcing black only printing, or select "Print in Grayscale" and "Black ink only" in the driver.
Some printer models (whether from HP or other manufacturers) may not allow printing in black if the color inks are empty. There are also some other constraints, black only printing is generally not available when printing on photo papers and may not be available when printing with an automatic two-sided duplexer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

How do I restrict my pdf form to print legal only

I have a form (in Acrobat 9 Pro) that should only be printed on legal. I am unable to locate information. Have tried setting the Adobe PDF Document Properties (Page Size) to legal. Is there a way to limit to printing legal only?? Would appreciate any help on this topic. Thanks much.

Yes, tried that. But unfortunately that option doesn't allow me to restrict users to only print their forms on legal paper. But thank you for your help.
Barbara A. Smith
Communications Coordinator
Marketing and Communications Group
Supply & Services Division
MB Infrastructure and Transportation
p. (204) 945-8892
f. (204) 948-3414
 Please consider the environment before printing this email.

HP 4100mfp no display, no printing, fans only spin

Similar Messages

Maybe you are looking for