HP 4510 Prints Skew/Slant out of the box on 2 different printers

I have purchased and returned (2) 4510tn laser printers that prints skewed/slanted (very minor) right out of the box.  Have worked with HP support to find a solution but they don't even acknowledgement that the problems exist.  I believe this is a defect across the entire line since the same thing happened with two brand new printers.  Has anyone out there experience the same problem?

Hi Chris,
This sounds interesting.
My first thoughts is that you have some sort of printer class configured, although this works as a load balancer for print jobs, it is not supposed to split a single job amongst the printers in the pool. Anyway, to check if this is set, you can open the Printer Setup Utility and look at the printer list. In the King column, you will see Printer Pool.
Another thought is network addressing. If you are using TCP/IP to connect to these printers, any chance there could be an IP address duplication?
Also, are the Mac's connected directly via IP to these printers or are they connecting via a share from a print server?

Similar Messages

  • HT201232 different iPhone come out from the box with a different serial number

    i am from Turkey. on 8th january 2015 i have ordered 2 iPhone 6 from the apple store online. and make shipped them to my friend who was living in US. few days ago she returned to Turkey and give me the phones. but in one of the boxes the iPhone 6 was different than the one i ordered. both iPhones that i ordered were 64 GB. but i have received one 64 GB space gray and one 16 GB gold iPhone 6. now i don't understand how such a thing happens with a worldwide company like Apple. before i go and open a case in the court i want Apple to solve my problem as soon as possible and change my iPhone 6 with the one i have purchased throughout the Apple store in Turkey İstanbul. or if you would say that i have to ship it to the US than Apple must pay the shipping bill. or apple pay me back the difference between 64 gb and 16 gb which is 100 dollars. so i am waiting you to contact me as soon as possible about the solution of this stupid mistake. Aplle USA says talk to the Apple store in Turkey. Aplle store in Turkey says we cannot do anything since iphones bought from US. vb

    Sorry, but you are not addressing Apple here, we are all users in these forums, just like you.
    If you buy an iPhone from another country, the warranty and service can only be handled in the country where it has been bought. Since Apple does not sip internationally, you'll have to bring the iPhone back in person or send it to someone who can do that for you in the USA.
    The warranty regulations are clear about that: Read Apple’s One Year Limited Warranty for iPhone

  • HP Pavillion Does NOT work Straight Out of the Box after Purchase

    My daughter bought a new HP Pavillion from Office Depot before starting computer classes at the university.  The first one would not work at all and after the tech folks tried all that they could and it would not work, the Office Depot staff exchanged it for another one.  Straight out of the box, it does not work. It crashes constantly.  My daughter has spent HOURS that she needs for assignments on the phone with HP tech support.  Here is where she stands with the situation now:  She bought the extended warranty, but apparently that does not cover computers that don't work.  The HP warranty....does not apparently assure that you get a working computer either, even when it's just days old and won't function.  So....after spending from about 1p to nearly 6p today on the phone with HP tech support, she is not assured that it will work. 
    They are calling back on Friday to see.
    So if it is NOT working, are we just out of luck with a piece of junk that does not function except as a word processor?  That won't connect to the internet without crashing?  We have been given no options or assurances.
    ( Post edited by Moderator)  When you buy a computer, it should work when it's brand new.  If you have a warranty, does that mean that HP stands behind their product and refund the consumer's money when it doesn't?  The new HP Envy printer did not work, due to a defective ink cartridge enclosed with it.  Does any HP product work at all? 

    @Mariellynne 
    I have brought your issue to the attention of an appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
    If you are unfamiliar with how the Forum's private message capability works, you can learn about that here.
    http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to-Post-and-More/bd-p/Hello
    I work for HP

  • 12GB already used on out-of-the-box refurb MBP?

    Hi-
    Just a quick question--
    My refurbished 15-inch MBP (2.2 Ghz, 120 GB hard disk) just arrived. I took it out of the box, started up and registered, and was planning to shift things from my old Powerbook G4 in Target disk mode, etc, but haven't done ANYTHING else yet. Out of curiosity I clicked on About this Mac, and saw that my HD has a capacity of 111.47 GB (I understand that "120 GB" probably means about 111 GB in reality), but that there is only 99.05 GB available, and 12.42 GB already used. Is that how much is needed for the basic Tiger (10.4.10) and applications that came preloaded on my MBP? If not, any ideas why 12.42 already used? Should I do an erase-and-install with Tiger OS? Do you think Apple didn't fully clean or erase the disk?
    Thanks,
    Samantha

    When Apple says "120 GB hard drive" they mean 120 billion bytes. But strictly speaking, 1 GB is 10243 bytes, not 10003 bytes.
    So when Finder says "111.47 GB capacity", it means 111.47 gigabytes, which is 111.47×10243=119.69 billion bytes. So your question is actually what happened to the missing 296 MB (or 0.31 billion bytes), and the answer is one of rounding error, disk overhead, or an extra partition on the hard drive used for booting. (The Boot camp forum has comments about an "extra" 300MB partition on the hard drive.)
    Unfortunately, the misleading "x GB hard drive" label for what is really an x÷1.0243 GB drive has become an industry standard, and is always stated in the fine print.

  • Restore iMac to "out of the box"

    I have replaced my iMac desktop. New one is up and running.
    I would now like to restore my old one to "out of the box" condition to give to my aunt.
    I tried Command R on start up and after the system was reinstalled, have found that my information is still on there.
    Can anyone help?
    Thank you

    Follow these instructions:
    What to do before selling or giving away your Mac
    In addition to the above:
    If you enabled FileVault, disable it in System Preferences > Security & Privacy.
    "Deauthorize" your iTunes account. Same for Audible if you have one.
    System Preferences > iCloud > de-select "Back to My Mac" and "Find my Mac".
    Sign out of iCloud. Select "Delete from Mac" when it appears.
    Then:
    Start your Mac with its original System Installation DVD (if your Mac shipped with one) or OS X Recovery (if it didn’t).
    Remove any Open Firmware password if you created one: select Firmware Password Utility from the Utilities menu and remove it.
    Select Disk Utility from the Utilities menu.
    Remove any partitions you may have created.
    Select the Mac's hard disk icon, then select the "Erase" tab.
    Select the "Security Options" button and erase the disk.
    The more "securely" you erase the disk, the longer it will take. The fastest method is sufficient since all but the most expensive techniques and equipment will be able to recover securely erased data.
    When it finishes, quit Disk Utility.
    Select Install Mac OS X from the Utilities menu. Do not create any user accounts.
    When it finishes, shut down the computer.
    If you want to install the bundled apps that were included with your Mac, restart by using your Applications DVD and install the bundled apps.
    Applicable to selling outside your family or others close to you: Don't forget to include any DVDs that came with your iMac, your AppleCare certificate if you bought it, printed documentation, even the box if you still have it.
    Execute a bill of sale showing the Mac's serial number.
    Once no longer in your possesion, remove the Mac from your devices in My Support Profile.

  • Vanilla vs Out of the box implementation ?

    hi all,
    can some one please tell me whats the difference between vanilla implementation and out of the box implementation ?
    regards,
    deepak

    Both are same thing
    Vanilla means cheap, basic and plain. No customization only configuration changes UI related change such as change the color of application user message dialog mesages etc.This means that the product is used strictly in accordance with the way the product vendor intends it to be used
    So Basically you can only configure the product using various parameters provided by the vendor as example you can add your parameters, region codes, user messages, dialog message, change print receipt format , logo changes etc you cannot change any functionality.
    Regards
    Kapil Pant

  • Buying New - Which models are Windows 7, 64-bit ready out of the box?

    Have always had HP printers and love them.  In reading the posts many questions are for Windows 7 and existing printers.  I am in the market for a new inkjet for text.  Don't want an all-in-one.  Can anyone tell me which HP printer models are Windows 7, 64-bit ready out of the box?  Store personel readily point to the "Windows 7 ready" stickers on display models, however, look confused when I press the 64 vs 32 bit issue.  Thanks

    Win 7 64-bit will install software and drivers written for Win 7 32-bit without any problems. I've presonally installed hundreds of printers on Win 7 64-bit without any problems. Do you have a specific printer in mind?
    Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
    Click on the BLUE KUDOS button on the left to say "Thanks"
    I am an ex-HP Employee.

  • Is the latest update to the 6th gen nano a software download or does it come with the new watch faces and larger icons out of the box

    Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
    Thx

    It should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
    B-rock

  • Help Please - on a VC that works out of the box with MAC before I sellup

    I have to declare that I’m somewhat frustrated at the moment and I could do with some good advise please bare with me while I explain.
    I have recently converted from all types of PC systems and MS OS to Apple. The conversion was based on a few drivers.
    1, My wife finally has decided to “learn” how to do her own web work instead of asking me to look up this or that for her. So as she was starting from scratch I thought MAC.
    2, At the same time I had a play with Vista at work and disliked it. I was using XP & W2K at the time.
    3, I wanted to update my home hardware, which was 3 years old.
    4, The accountant said I hadn’t spent enough on IT last year.
    5, New project work in the planning that required video/audio work to upload onto the web and everyone said MAC was the best.
    So having looked around and done what I thought was enough research I started investing. To date I’ve invested £4500 plus.
    Started by buying
    iMAC 24” 2.8 Gz Intel with 4GB ram (for the home office)
    MacBook Pro 2.4 with 4GB ram (for out and about working)
    iPHONE 16GB (which is great)
    VMware Fusion was installed for those things that I couldn’t live without until I found a suitable replacement like MS Money, Paint Shop Pro, MS Office etc. Installed XP.
    Tried Open Office found it to clunky and hard work working off files for MS Office that others sent/required. Ended up buying Office 2008 only to find VB macros don’t work in Excel and all my company spreadsheets still need PC MS Excel to run so back into XP via Fusion.
    Then to MAIL which is great on the iPHONE as I can easily monitor my 5 email accounts, what a result. But now I come to attach JPG files as I would in outlook and they open into the content of text in the mail and will not stay closed but disrupt the message. Wholly unacceptable to my way of working with no cure.
    Scanning next, so I down loaded GIMP to replace PSP which I find useless so back to PSP I go again via XP & Fusion.
    Next and finally the VC project, Now please bare in mind that all I want to do is shoot film, upload it to edit it and then mount it on the web page. I have no desire to become any form of expert in the field just get the job done.
    So reviewed iMovie to understand the spec. Realise it has limitation and reviewed FCE which seems to plug the gaps and boarders on being more professional.
    At this point I must say I’m not totally new to this subject as I have used Studio8 and a JVC GR-DVL166EK video cam a couple of years ago and got on ok without any issues simple plug and play with great results.
    Having reviewed the standards that the software is reported to work too without any publicly declared exclusions or exceptions by Apple I went shopping for the VC. (I didn’t know of the forum at the time and to the best of my knowledge Apple don’t advise of its existence in any product information on anything I have bought.)
    I buy a Panasonic HDC-HS9 for £700 which doesn’t flaming work despite the fact that it should based on all the standards quoted by both manufactures and there are no disclaimers from either party that it won’t work.
    I have reviewed the compatibility list on the support page (now I know its there) and find that the Panasonic HDC-SD5 does work. I reviewed the comprehensive detailed model spec on the Panasonic web site and there is no differences between the to models at all accept the HDD.
    So why don’t it work?
    *At the end of the day can anyone please recommend a VC that will produce high quality results without the need of a 3rd party software to connect and upload files convert and muck about instead of getting on with the job.*
    And if all the publicised specs don’t allow you to conclude compatibility how can you protect your investment? Where do we legally stand and where is the accountability to the consumer.
    <edited by host>
    I am that fed up with the last 3 months of mucking about Bill Gat*es may just get me back.
    Thanking anyone in anticipation for some meaning advise and help.
    Regards
    Alan

    Hi, and thanks for you interest. The problems is that whether I'm using iMovie or FCE I get to a stage where the thumbnail image is present but if you try to play, import or any other action in either app it closes down and a message comes up " The Application Final Cut Express/iMovie quit unexpectedly - Mac OS X and other application are not affected" then asks if I wish to relaunch. I then hit the report to Apple button and afterwards relaunch. I was recommended to use Voltaic which I have tried, it worked but is to much mucking about for something that should work out of the box.
    This problem happens on both the iMAC and the MacBook so quite sure it's not a OS software issue. All software update are up to date also.
    Any ideas?

  • Not able to start out of the box approval workflow programmatically

    We have a requirement to start an out of the box workflow from a .NET web service.
    We are using the StartWorfklow method:
    wfManager.StartWorkflow(item, association, association.AssociationData
    we are getting the below error message at the above line of code: Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal
    Then, we tried:
    SPSecurity.RunWithElevatedPrivileges(delegate()
            wfManager.StartWorkflow(item, association, association.AssociationData,
    SPWorkflowRunOptions.Synchronous);
    Now, the workflow got canceled automatically with "Failed on Start" status. In the "Workflow History", it is showing 2 records with "was canceled by System Account." & "failed to start" in the description
    column.
    Please advise.

    Hi Zhengyu,
    1. I've already done that:
    a) when "SPSecurity.RunWithElevatedPrivileges(delegate()"
    is used, there are no errors showing up and code gets executed. However, the workflow failed to start.
    b) When I don't use elevated privileges, the code is showing an error (Attempted to perform an unauthorized operation.. Data: System.Collections.ListDictionaryInternal) when
    it tries to start the workflow (StartWorkflow method).
    2. The workflow starts with no issues through UI. I tried it using "System Account" and another account.
    3. I tried also "Collect Feedback" workflow template. Same results...
    You can find the code below:
    public
    stringStartItemWorkflow(stringsitePath,
    stringlibraryName,
    stringfileName)
    stringreturnVal =
    String.Empty;
    stringwfName =
    "VPApprovalWF";
    SPUserTokentoken = GetSecurityToken(sitePath);
    try
    using(Microsoft.SharePoint.SPSiteportalSite
    = newMicrosoft.SharePoint.SPSite(sitePath,
    token))
    using(SPWebportalWeb
    = portalSite.OpenWeb())
                        portalWeb.AllowUnsafeUpdates =
    true;
    SPListlist = portalWeb.Lists[libraryName];
    SPQueryfileQuery =
    newSPQuery();
                        fileQuery.Query =
    String.Format("<Where><Contains><FieldRef
    Name='FileLeafRef' /><Value Type=\"User\">{0}</Value></Contains></Where>", fileName);
                        fileQuery.ViewAttributes =
    "Scope='RecursiveAll'";
    SPListItemCollectionlistItemCol = list.GetItems(fileQuery);
    SPWorkflowManagerwfManager = portalSite.WorkflowManager;
    SPWorkflowAssociationCollectionassociationCollection
    = list.WorkflowAssociations;
    if(listItemCol.Count > 0)
    foreach(SPListItemitem
    inlistItemCol)
    if(associationCollection.Count > 0)
    foreach(SPWorkflowAssociationassociation
    inassociationCollection)
    if(association.Name == wfName)
                                            item.Update();
                                            association.AutoStartChange
    =
    true;
                                            association.AutoStartCreate
    =
    false;
                                            association.AssociationData
    =
    String.Empty;
                                            StartWF(wfManager,
    item, association);
                                            returnVal +=
    "Workflow Started";
    break;
    else
                                    returnVal +=
    "No workflows are attached to the library.";
    else
                            returnVal +=
    "A file with the name provided doesn't exist";
                        portalWeb.AllowUnsafeUpdates =
    false;
    catch(Exceptionex)
                returnVal +=
    "Workflow not started, reason: "+
    String.Format("Source:
    {0}. Stack Trace: {1}. Inner Exception:{2}. Message: {3}. Data: {4}", ex.Source, ex.StackTrace, ex.InnerException, ex.Message, ex.Data);
    returnreturnVal;
    SPUserTokenGetSecurityToken(stringsitePath)
    SPUserTokentoken =
    null;
    SPSecurity.RunWithElevatedPrivileges(delegate()
                Microsoft.SharePoint.
    SPSiteportalSite =
    newMicrosoft.SharePoint.SPSite(sitePath);
                token = portalSite.RootWeb.EnsureUser(
    "DOMAIN\\ADMIN-USER").UserToken;
                portalSite.Dispose();
    returntoken;
    privatestaticvoidStartWF(SPWorkflowManagerwfManager,
    SPListItemitem,
    SPWorkflowAssociationassociation)
    SPSecurity.RunWithElevatedPrivileges(delegate()
                wfManager.StartWorkflow(item, association, association.AssociationData,
    SPWorkflowRunOptions.Synchronous);
    Thank you all for your help.
    Regards,

  • Not able to get Out-of-the-Box Examples Index Page for running the jsp examples

    Hi
    I am a new person using weblogic first time I installed the weblogic 7.0 beta
    version on my machine.I am trying to start the weblogic server console so that
    I can configure web applications examples on my machine.
    I am getting following error and not able to view Out-of-the-Box Examples Index
    Page
    error:
    <Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
    on Port 7003: Address in use: JVM_Bind>
    Please help me to find the reason to have this problem
    Thank You in advance
    Vikas

    Hi.
    Please post all WLS 7.0 beta questions to the beta newsgroups -
    weblogic.developer.interest.70beta.*.
    Thanks,
    Michael
    Vikas wrote:
    Hi
    I am a new person using weblogic first time I installed the weblogic 7.0 beta
    version on my machine.I am trying to start the weblogic server console so that
    I can configure web applications examples on my machine.
    I am getting following error and not able to view Out-of-the-Box Examples Index
    Page
    error:
    <Apr 5, 2002 12:11:39 PM IST> <Error> <SystemDataStore> <null> <Unable to listen
    on Port 7003: Address in use: JVM_Bind>
    Please help me to find the reason to have this problem
    Thank You in advance
    Vikas--
    Michael Young
    Developer Relations Engineer
    BEA Support

  • Add javascript to Out of the box Modal Dialogue Box in Sharepoint 2010.

    Hi,
    We have Sharepoint and Project Server 2010 SP-2 enviroment. We are using Project Server Timesheet for our managing Time logging.
    Project Server 2010 has "Add existing task" Modal Dialogue box in which I want to add "Javascript" code in order to sort the Project Server Timesheet Line Claasification listbox control in Ascending order.
    As you can see from below screenshot "Standard" the Out of the box timesheet line classification is coming at top and then our custom line classification coming.
    But I want to sort this list in ascending order so that this "Standard line classification can come at the bottom of the listbox control.
    Please suggest me how can I achieve this.
    Thanks much !!!
    Sachin Vashishth MCTS

    Thanks SaiRam from input, I can get JQuery for sorting the control over the internet no issue. I have to pass the ControlId in J-Query to sor the items in that control and I am not able to get the control id as it;s modalk dialogue box.
    Can you please explain further here, also let me know in case I am wrong in my understanding.
    Thanks !!!
    Sachin Vashishth MCTS

  • Dynamic DNS (via DHCP) out of the box?

    Greetings!
    I was just wondering... Does OS X support Dynamic DNS updates out of the box?
    I can't seem to find any confirmation if 10.5 uses bootpd (which I think it does), and if bootpd supports dynamic DNS updates with the named service built into Leopard Server. There don't seem to be any options in Server Admin to enable this... So I'm a little hazy as how to enable dynamic DNS without compiling my own version of ISC-DHCP.
    Just for clarification here; what I'm looking for is the ability to update a DNS zone with a PTR/A record(s) of machines that send a hostname as a part of retrieving a IP address from a DDNS-enabled DHCP server. Ie, "mybox" requests IP from DHCP server, DHCP server updates "mydomain.tld" with a record for "mybox", so that "mybox.mydomain.tld" is resolvable afterwards by the machines on this subnet.
    Cheers,
    -SC

    This is a strange topic because implementing Dynamic DNS on Mac OS X Server looks like it should be child's play... so why hasn't Apple done it? Could it simply be that Apple sees no need for it at this time? Mac OS X clients don't need it to sit happy with a Mac OS X Server. Neither do Windows clients using a Mac OS X Server PDC.
    Apple has implemented Dynamic DNS client support into the Active Directory Plug-in in Leopard. In this environment, of course, the client's DNS server is most likely to be an Active Directory-integrated DNS server which happily support DDNS. Unfortunately this Dynamic DNS facility is not immediately available to those not using the Active Directory plug-in.

  • In search of assistance learning how to modify the mail message from an out of the box SP2010 approval workflow.

    So, I have found the article
    http://punaro.com/2012/01/derek/modifying-a-sharepoint-2010-workflow-email/comment-page-1/ which appears to walk through the process of modifying an out of the box workflow's mail message.
    However, there is a basic problem that I run into before I get started.
    I am logged into the system as a regular user (ie not a farm admin, etc.).
    I do, however, have full control on the site on which I am working.
    I create a custom list.
    I create a simple one step approval - sharepoint 2010 out of the box workflow.
    I start SharePoint designer and give it the URL of the list. It opens up and I see the various objects on the left side of the screen.
    I click right on the Workflows object - which is where the article says I will find the ability to copy and modify the workflow.
    All I see is "open", "open in a new tab" and "Pin".
    I selecdt open in a new tab - and I get a blank screen labeled workflows that says "There are no items to show in this view".
    So, I click on Lists and Libraries, then on the name of my custom list.
    When the list displays, the Workflows section of the page has a "Modified Workflow" displayed.
    When I right click on it, no menu is shown. When I click on the modified workflow, I get the workflow settings page for that workflow.
    I am trying to figure out how to create the copy of the workflow so that I can modify one of the mail messages in SharePoint designer.
    Is there someone who has some advice on how to find this copy and modify option?  Or perhaps a web site, web forum, article series, or book covering the topic?
    Thank you! 

    Hi lwvirden,
    According to your description, my understanding is that you want to modify the OOB approval workflow in SharePoint Designer.
    After opening the site in SharePoint Designer, just click Workflows in the left panel and then the workflows in the site will load in the right part.
    If you want to copy and modify the OOB approval workflow, then you need to right the approval workflow
    Approval – SharePoint 2010 under Globally Reusable Workflow. After that you will see the
    Copy and Modify button.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • Out of the box sharepoint online 2013 workflow

    Hi All,
    I have a workflow that sends a email to a user after creating a new document.
    Now a want to attach a document to this email but this is not possible with the out of the box SharePoint 2013 solution. I use the SP 2010 workflow because I need to send a email to an external user.
    Is there a solution that I can use to attach a document to a email in a workflow?

    Not possible out of the box. Just curious why would you want to email someone files over the email? I think the logical way is to simply send the item link. This will show user the item details and attachments.
    Anyways, If that's the way you want to do it then check the following codeplex solution out.
    http://spdactivities.codeplex.com/
    I would still recommend you to send the current Item URL in the email instead of sending document as an attachment. 
    If this helped you resolve your issue, please mark it Answered

Maybe you are looking for