HP B110a in constant loop - cannot print, "printer error, please restart printer"

i was trying to set up the wireless feature of this printer but it never managed to get a connection to the wireless router.
after i type the WPA2 key in, all the touch buttons start flashing together and the screen says "Printer error, pleae press power button and restart printer"
now i've tried everything, even factory reset via the touch menus (have to be very fast to do the reset before the same error comes up). and basically the printer is unfunctional at the moment.
is there a method to reset it? or is there a solution?
i am using both a mac and pc, primarily mac. the wireless setup option during the mac driver installation also failed. it hung on the bit where it tries to connect to the router so i restarted everything after an hour of waiting.

Hey guys,
I had this same problem and have finally fixed it. For more details please see my thread over here:
http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile/If-you-have-a-Blue-Screen-Error-due-to-Wireles...

Similar Messages

Officejet Pro 8625 Printer Error Please turn printer off, then on

Upon power up and connection to wiFi all appeares to be functioning properly. Can even e-print. All is still well when printer goes to sleep (will wake-up and e-print). After about 10-15 minutes will get a white screen with an message "Printer error Please turn printer off, then on" all other lights are flashing including power button. I have tried updating windows and print drivers. This first happened about two weeks ago. After updating print drivers all appeared to be well until three or four days ago then it has all started again. HELP PLEASE

Dear ChristineChandl,
Please follow the steps of this document:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8500-All-in-One-Printer-series---A909/3752454/m...
I hope you find it helpful.
Greetings.
* I am not an employee of HP, my work is voluntary.
If this answer was helpful and clarify or resolve your problem, please mark the issue as resolved and click my star next to give a kudo as thanks.
I am not an employee of HP, my work is voluntary. If this answer has been helpful and clarifies or solves your problem, please click the button
and click on the icon if you want acknowledge the assistance.

Did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?

did recent recommended update cause incompatibility with HP printer, causing error message and printer to print blank pages?

Why not contact HP tech support for assistance since they make the printer. While on their site you can look for an updated printer driver. Otherwise, try deleting the current installed driver, reset the print system, then reinstall your printer's driver.
Mac OS X- How to reset the printing system

I have successfully downloaded lion, and after I click restart, the message " you hard disc is corrupted and cannot be repaired. Please restart" keeps looping. Help !

I have successfully downloaded lion, and after I click restart, the message " you hard disc is corrupted and cannot be repaired. Please restart" keeps looping. Help !

First try restarting your Mac into "safe mode", which will run the equivalent of a Disk Utility "repair disk" operation. If your Mac shuts down during that process, you'll have to try something a little more powerful (and more expensive), such as DiskWarrior.

Report Print.VI redirects to the wrong printer if error on intended printer

I have an application that involves a Zebra barcode printer and an HP letter-sized printer, both connected via USB to an XP box running LV2011. I need to send binary files directly to the label printer so I have it shared as LPT1 using NETUSE and I use COPY to get the file to the printer. Works great, except for the flash as the DOS screen momentarily appears during the COPY command. I can live with that. Here's the problem: when I use Print Report.VI to send an HTML report to the letter-sized printer it comes out on the label printer if there is any issue with the intended printer (e.g. out of toner). 35 labels later....
1] is there any way to force the print to sit in the HP's queue instead of redirecting to the label printer? I believe the Print Report VI uses IE's default printer regardless of what you specify, so maybe it's also IE that's doing the substitution?
2] is there any way to query the HP printer's "health" before sending a job so I can avoid creating the issue in the first place? I read somewhere that Windows only knows the state of the printer at certain discrete (an not-so-informative) times.

Hi Zwired1,
Just to make sure I fully understand the situation - I am assuming since you say you are printing to two different printers that when you are using the Print Report.vi you are using the printer name string to specify which printer you would like to print on. And if the printer that you specify is not functioning it automatically prints on the other printer, is that correct?
From looking at the code in the Print Report.vi, it looks like if you specify a printer name in the input string, if there is a problem with that printer or if that printer is unavailable, the VI should not print anything, so please let me know if that is not the behavior you are seeing.
For your question about checking the health of printers, there is a VI in the report gen toolkit called Query Available Printers. You can find it if you open up the Print Report.vi and choose the Standard Report instance, the Query Available Printers.vi is on the block diagram of that VI. It will return the list of available printers and the default printer.
I hope that helps,

InDesign CS3 Print Engine Error and Corrupt Print Dialog Box

We are a networked office working on various files off of a server. After setting print settings in the print dialog box and saving the file, when another user (or the same user) reopens the file, the Print dialog box settings are changed in a bizarre, corrupted way, and the file will not print. We get the following error:
Printing Error: The Adobe Print Engine has failed to output your data due to an unknown problem.
and printing fails to the HP LaserJet 4240 PS (64 MB RAM).
We all use Windows XP, SP2, Dualcore 3 GHz Pentium Processors with 3.5 GB of RAM.
Specifically, the Print dialog box shows these strange settings:
Scaling gets set to 0%, copies are set to 0
Spreads are turned on
Print Visible Guides and Baseline Grids are turned on
All printers marks are turned on, offset is set to 0
Use document bleed settings is turned on, include slug area is selected
Output Text as Black is turned on
Omit for OPI has all 3 file formats selected (EPS, PDF, and Bitmap)
Usually resetting the Print dialog box and saving the file allows us to print but then the next time we open the file, the Print settings are corrupted again.
Any solutions? Or any fixes in the works?
Thanks for your help!

We currently only notice this problem with files associated with one project. The project is a book of many chapters, each with it's own file. The problem affects multiple files and multiple users (4 out of 5 people working on these files have experienced the problem). It may very well be a problem caused by a different user opening the files after another has closed them.
We have a LAN with multiple Dell servers running Windows 2003 and many end-user PCs using Windows XP. All printers are on the network but printing occurs locally, meaning that data sent to a printer does not go through a server.
We could test the problem by copying a chapter to one person's computer and making them the only person who works on it for a day or two. It's just hard to do so because different people have different duties to perform on all files.
Thanks for your help!

Canon printer randomly erroring out during printing.

A few weeks ago I bought a new AEBS and hooked up my Canon MP530 printer to it. I printed out a few things from my Mac. My wife printed out a few things from her PC. Everything seemed fine.
Today I go to print out a simple two page pdf and about 75% of the way through page 1, the printer stops. I look in the print queue and it is just sitting there saying it is printing, but nothing is happening. I click the pause button in the print queue, and the printer spits out the paper and essentially cancels the job.
I try reprinting several times, but every time it does the exact same thing at a random point. Sometimes it almost completes, sometimes it errors after 1/4 of a page.
I clicked the "reset all printer functions" or whatever it is called in the print queue and that didn't help.
I was using the default Leopard Canon printers, which are the exact same version number as what Canon has on their site. I have never had a problem in the past 6 months using a direct USB connection, but I figure I would try reinstalling the drivers. I follow the instructions given by Canon to remove the old drivers and install the new ones. Of course, there is no change.
I connect the printer via USB and print the document no problem without changing a single setting.
I look in the error log and this is what I see (I set a marker before I tried printing, so this is the exact point that I clicked print):
I [03/Jun/2008:18:55:15 -0400] [Job 4] Adding start banner page "none".
I [03/Jun/2008:18:55:15 -0400] [Job 4] Adding job file of type application/pdf.
I [03/Jun/2008:18:55:15 -0400] [Job 4] Queued on "Canon_MP530" by "dcorban".
I [03/Jun/2008:18:55:15 -0400] [Job 4] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 313)
E [03/Jun/2008:18:58:55 -0400] Pause-Printer: Unauthorized
I [03/Jun/2008:18:58:55 -0400] Saving printers.conf...
I [03/Jun/2008:18:58:55 -0400] Printer "Canon_MP530" stopped by "dcorban".
I [03/Jun/2008:18:59:02 -0400] Saving printers.conf...
I [03/Jun/2008:18:59:02 -0400] Printer "Canon_MP530" started by "dcorban".
I [03/Jun/2008:18:59:02 -0400] [Job 4] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 322)
E [03/Jun/2008:18:59:10 -0400] PID 313 (/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr) crashed on signal 14!
I [03/Jun/2008:18:59:10 -0400] Hint: Try setting the LogLevel to "debug" to find out more.
The first line that starts with "E" is after 3 minutes of the printer sitting there doing nothing. I clicked the pause button. This caused the printer to eject the paper. A couple seconds later I clicked resume and nothing happened. About 10 seconds later I click the delete job button (the second "E" line mentioning signal 14).
This "crash on signal 14" is the error message every single time. I did a google search and only came up with one other mention of this and it was another user asking *** was going on.
Since it works via USB, I can only assume that it is a problem with the base station or the printer drivers. Has anyone had this error before and what did you do to fix it?

You can check the cartridge warranty as shown here. The warranty for cartridges is separate from the printer warranty and is generally two years from the date of manufacture.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Applications server 10g - page cannot be found error please help!!

hi,
after installing applications server 10g on windows when i try and access the admin page with the link provided from install and getting started page (http://oracle.itec.local/em) i keep on getting page cannot be displayed error! please help!!

In the dir where you installed the AS software (mid and infra) there is a sub directory called "install" inside that directory there are two files: portlist.ini and setupinfo.txt .... if you paste there contents I can help you farther

Continue processing gpp printer if error occurs on print serer

HI
I have problem. when print server is stuck or has no network the gpp printers policy is stuck trying to continue but stop processing all other group policy and the user cannot login.
how can i make the gpp printers policy from prevent user login ?

> how can i make the gpp printers policy from prevent user login ?
You cannot. If you need async processing, you MUST use startup or logon
scripts (or scheduled tasks that run these scripts).
A possible workaround might be
http://evilgpo.blogspot.de/2013/01/group-policy-preferences-drive-maps-and.html,
but this will only work if the server is completely unresponsive. If
it's only the spooler subsystem, it will not help :)
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Printer communication error, canon mx870 prints one time then communication error on next print job

I have a canon mx870. It keeps sending a message that there is a communication error. I then re enter my network key and restart the printer and my macbook pro. It will print a few times then the message returns. My PC is also connected to the network and does not get this message. Any suggestions?

Hi c,
There were some updates addressing printing issues. Run Software Update, update whatever's there, and see if that helps.

Will not print, show error (0x61011beb) General Printer Error.

I have had this printer since 2009 and have been very happy with it. I am currently having an error show of (0x61011beb) General Printer Error with instructions to look in the Printer Documentation. I am not finding anything that helps. Any suggestions would be appreciated.

Hello , and welcome to the HP Forums, I hope you enjoy your experience! I see you're having 0x errors. I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Also, do you have the same errors when you try to make a copy? Good luck and please let me know what you find. Thank you for posting on the HP Forums!

Cannot get mail error: please help! :/

Everytime I click on my mail app on my iphone 4, I get the "cannot get mail, connection to the server failed". I have deleted the account before and it fixes it temporarily only to happen again in the future. What is going on?

Start with these two support articles. Try everything in both. If you still have no success, post back and try to be very specific about steps that you worked through, what happened, etc.
Unable to send or receive mail
http://support.apple.com/kb/TS3899
Setting up and troubleshooting mail.
http://www.apple.com/support/ipad/assistant/mail/

Cannot Find Symbol Error, please help.

I am brand new to Java, so sorry if this question is obvious, but I keep receiving the following error when i try and compile the following code Circle.java
Circle.java:17: cannot find symbol
symbol : constructor Point()
location: class pointClass.Point
^
Circle.java:18: cannot find symbol
symbol : method Point(double,double)
location: class pointClass.Point
super.Point(x,y); //set center to (x,y)
^
2 errors
I cant seem to figure out why I am getting this error, any help that anyone could provide would be greatly appreciated.
This is the code for Circle.java:
package circleClass;
import pointClass.*;
public class Circle extends Point
private double radius; //Add a double radius field.
public Circle()
super(0,0); //call Point?s constructor initializing center to (0,0)
radius = 0.0; //set radius to 0.0
public Circle(double x, double y, double r)
super.Point(x,y); //set center to (x,y)
radius = r; //set radius to r
public double r()
return radius; //returns radius.
public double getArea()
return Math.PI*(radius*radius); //returns area of Circle object
public double getCircumference()
return 2*Math.PI*radius; //returns circumference of Circle object
public String toString()
return "center: ("+x+","+y+")"+"\nradius: "+r; //returns String that will give
//output of the format...
//center: (x,y)
//radius: r
If it helps, this is the code for pointClass:
package pointClass;
public class Point
private double xcoor,ycoor;
public static final Point ORIGIN = new Point();
private Point()
xcoor = 0;
ycoor = 0;
public Point(double x, double y)
xcoor = x;
ycoor = y;
public double x()
return xcoor;
public double y()
return ycoor;
public String toString()
return "(" + xcoor + "," + ycoor + ")";
public static double distance(Point p, Point q)
double dx = q.xcoor - p.xcoor;
double dy = q.ycoor - p.ycoor;
return Math.sqrt(dx*dx + dy*dy);
Thanks for your help.

{color:#000080}Both of your classes need to be in the same package, not each one in a package of its own. You have imported pointClass.Pont in Circle.java, but I don't think that's what you want to do. For a better understanding of packages, read{color}
http://java.sun.com/docs/books/tutorial/java/package/index.html
And post code like this:
[code]CODE[/code] is displayed as CODE{color:#000080}db{color}

Cannot Install Item. Please restart your app-

A folio which downloaded perfectly last week is now failing to download. The folio has been shared to a number of people whom are now getting the same message "Please restart the app and download your purchase again". It gets exactly 4.6mb in before notification. Are there any known problems at the moment?

Update:
Publishing the whole thing via the Distribution Service (as suggested in another thread) seems to clear up the issue of the HTMLResources.zip. Going that route, the folio is viewable on the iPad with images and css styling.
But still cant seem to get the JavaScript in the article HTML page to work. Matter of fact, it seems to choke on the article upload to folio until I comment out the line "<script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script>"
Im no scripting genius, so the error could be there, but does the Folio Producer validate/look at page code or scripting? Are we not permitted to link out to .js?
dw
p.s. this is what my <head> looks like;
<!DOCTYPE HTML>
<html>
<head>
<title>Chapter 1</title>
<meta charset="utf-8">
<meta name="adobe-presentation" content="pagination=yes"/>
<link href="../HTMLResources/test_page.css" rel="stylesheet" type="text/css">
<script type="text/javascript" src="http://code.jquery.com/jquery-latest.js"></script>
<script type="text/javascript">
$(document).ready(function(){
//Set default open/close settings
$('.acc_container').hide(); //Hide/close all containers
/*$('.acc_trigger:first').addClass('active').next().show();*/ //Add "active" class to first trigger, then show/open the immediate next container
//On Click
$('.acc_trigger').click(function(){
    $(this).toggleClass('active').next().slideUp("slow");
    if( $(this).next().is(':hidden') ) { //If immediate next container is closed...
        $('.acc_trigger').removeClass('active').next().slideUp(); //Remove all .acc_trigger classes and slide up the immediate next container
        $(this).toggleClass('active').next().slideDown(); //Add .acc_trigger class to clicked trigger and slide down the immediate next container
    return false; //Prevent the browser jump to the link anchor
</script>
</head>

Printer Communication Error

I've owned an Epson 1280 printer for about a year now, but for some reason it no longer prints. When I print a document the pop-up message reads: "Printer communication error, try reseting printer and try again"
But that still doesnt work. My system profile can read the printer, but my printer list can not.
When I try to add a printer via Printer Setup Utility, it can't find the new drivers. Even after installing new drivers from the Epson website.
What is this communication error? And how can I fix it?
SOMEONE PLEASE HELP!
iBook G4 Mac OS X (10.3.9) Printer: Epson 1280 | DVD RW: Sony DRX 810UL

I never found an answer to my problem. I just used the lazy way of troubleshooting any problem.
I just reinstalled my OS and archived the previous system. Everything is fine again. My Epson 1280 prints, YES!

HP B110a in constant loop - cannot print, "printer error, please restart printer"

Similar Messages

Maybe you are looking for