HP Deskjet 5160 is now working... Part of the 5100 series

I was getting an error 'Error:-9672' as the system tried to install driver for my Deskjet.
Resolution:Partly following instructions from
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&obje ctID=c00263384
Downloaded and installed the Universal Binary 3.3
Instead of following instructions in section 6, I went to System Preferences and opened the Print & Fax section and let Leopard choose the 3.3 drivers.
All working now.

The SSID on the printer and computer were the exact same except for the last four numbers. What I mean is that the computer gave me four extra numbers than what the printer was reading (I am not sure if it is due to downloading the wrong driver or not considering there were 2 different model choices for the 7410 when I chose my driver). I have not used this printer before and am trying to see if I can get it connected...it's not new either. I have already enabled the Officejet 7400 series under the imaging devices in my computer's device manager, yet still my printer can not detect my computer.

Similar Messages

Creative Zen Sleek and the Now Playing-part of the firmw

Hi,
this week I got my Creative Zen Sleek. I'm very satisfied, except for one thing - the Now Playing-part of the firmware (the list with all the songs queued up). In the old Nomad Jukebox Zen firmware, the list was divided by artist or album name. On the Zen Sleek, however, the list is just going on without even showing which songs belonging to which album etc.
This is really annoying me - would it be possible to fix this, or at least consider the possibility for this to be integrated in the next firmware upgrade?
Sincerely
Hein Haraldson Berg

& Putting the X-Fi into Recovery Mode and selecting clean up seemed to fix the problem, but it does still come up randomly.
The clean up puts the player menus back to their defaults though... any chance that in a future fix for the player, this wouldn't occur?

Phone went through wash and everthing is now working except for the data. Phone keeps searching...

My phone went throught the wash and everything is now working except for the data. It keeps searching...

You can try getting a new microSIM for it. How long did you let it dry?

Why does my Safari Auto-Fill only work part of the time?

First of all, why isn't there a link on the Apple website to provide Feedback? Secondly, I'd love to know why my Safari Auto-Fill only works some of the time, like when entering Sweepstakes information. I realize some websites don't allow Auto-Fill, but on the ones that do, I can't get the second window to open up when I click "Auto-Fill".

Safari 6.1.1 and yes all web forms are checked under Preferences Auto-Fill. I am daily entering sweepstakes for the HGTV dream home, and even though the initial bubble shows up "Auto-Fill your contact information" shows up, when I click on it, the second bubble that lets you confirm the info doesn't always open. I tried it just now in a separate tab, and it opened; then I came back here to write some of the message. Then I went back to try again and it won't open. It drives me crazy. I keep trying with each new data field and sometimes the second bubble will open further down the page.

Hover curser over song and there's no arrow for options to add the song to a playlist, the song has to be played for the arrow to appear, which is then at the now playing part in the middle at the top of the screen

The little arrow which says "Play Next, Add to Up Next, Go to artist" etc. only appears at the top of the screen on the now playing part. On 11.2 on my laptop before it got refurbished, this arrow appeared when you hover the curser over the name of a song.
Bit annoying having to change the song everytime I want to add it to a playist etc. Is there any way I can make this arrow appear again by just hovering over the song name?
Thanks.

If it happens again the make sure that you aren't suppressing website colors.
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
*https://support.mozilla.org/kb/Options+window+-+Content+panel
*http://kb.mozillazine.org/Website_colors_are_wrong
*http://kb.mozillazine.org/Websites_look_wrong

Why does FF 9 work part of the time and others I can't even get it to load a webpage. When I open it, it says about blank and Tab on the tab bar. Will not let me go to any websites. HELP Please!!

After FF 9 installed every little while I lose whatever page I am on and it goes to about blank. When I tried to reload my pages it just sits there. Yesterday I was about to uninstall it and it started working fine again. This morning it decided to stop again, I have uninstalled it, rebooted and reinstalled and it's still doing this.
I never had this problem with any of the other versions. It all started with FF 9. It downloaded itself after I told it ignore update. I am getting very flustered with this happening.
It acts like it has a mind of its own when it comes to when it is going to work for me or not. I need to fix this somehow. I even tried reinstalling 7 again and it did the same thing as 9 does now. I took it back off and put 9 back on since neither want to work properly.

Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem.

Xev/xmodmap only working part of the time [resolved]

Ok guys, maybe its just my mind playing tricks on me at 1am, but...
I bought a new laptop. Been trying to get it setup (I even made a wiki page for it in hardware->laptops), and tonight I tackled accelerated 3D, suspend to ram, and function keys (multimedia keys). Which brings me to this post...
The nice, easy way of setting it up through XFCE4 or keytouch wasn't recognizing all of my keys, so I turned to xmodmap.
First off, the kernel isn't recognizing all of them. No biggie, I figure we'll play around with evdev and scripting later.
So ... the ones that do work... well they're producing keycodes in xev! Great!
Made my xmodmap file
Ran /usr/bin/xmodmap $HOME/.Xmodmap
Voila! xev is now showing me keysyms! On to setting them up through XFCE, right?
Wrong.
I decided to clean up a bit, and restarted X just for the heck of it.
Now, my xev is not producing keysyms. Not even showing me keyCODES anymore.
Where before it was printing your normal output, similar to
KeyRelease event, serial 31, synthetic NO, window 0x2a00001,
root 0x87, subw 0x0, time 2557948, (314,172), root:(945,537),
state 0x50, keycode 174 (keysym 0x0, same_screen YES,
XLookupString gives 0 bytes:
XFilterEvent returns: False
(before xmodmap it was null, after it showed the keysym as well) (i just hit a letter and copied/modified this, its not EXACTLY right, since now everything is screwed up)
now it is showing me
KeymapNotify event, serial 31, synthetic NO, window 0x0,
keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
FocusOut event, serial 31, synthetic NO, window 0x2a00001,
mode NotifyGrab, detail NotifyAncestor
FocusIn event, serial 31, synthetic NO, window 0x2a00001,
mode NotifyUngrab, detail NotifyAncestor
for the same keys.
This happened the other day, and I just rebooted a few times and it went away. Came right back tonight though.
I'm not really sure what to do with this one.
Ideas?
Last edited by drewbug01 (2008-02-02 08:28:58)

Hello there,
It may be that these keys are generating scan codes that X does not translate into key codes. If X doesn't get the key codes, it cannot do any type of key mapping with xmodmap. I had a similar problem with my Dell Inspiron 9300. Certain keys did not get translated by X. To solve this problem I did the following:
1. Figure out the scan codes for the keys that do not generate X key codes. There is a console program around that lets you do this, but I can't remember it for the life of me. Surely if you google you will find it. I think I recall finding it in an article about setting up these extra keys on Dell laptops, but I'm not sure.
2. Use setkeycodes to map these scan codes to key codes that X can use. In my case, I added the following to my rc.local file to always map the scan codes on boot:
# Map the Fn+F1 (Hibernate) key
setkeycodes e00a 123
# Map the Fn+F3 (battery) key
setkeycodes e007 120
3. Use xmodmap to map these key codes to a key symbol you can use.
4. Use xbindkeys (or whatever the XFCE equivalent is) to map these keys to your desired action.
I hope this gets you pointed in the right direction. Good luck.
jay

DOWNLOAD IS NOW WORKING,THANKS FOR THE FIX APPLE

i-tunes just finished the download,so it seems to be fixed and i have to day i'm all happy again,now i have the first movement,way to go apple for the quick fix of what i am guessing is a complex troubleshoot.

Glad things worked out for you.

My Display Only Works Part of the Time and Apple Care Won't Help Me (Long)

I bought my computer at a discounted price because it was a restocked item, but was it really worth it? I'm beginning to think not. I saw that it had one stuck pixel, but saving that much money on such an expensive computer, the pixel hardly seemed like a travesty. However, I think I've discovered the real reason why the last owner gave up such a seemingly exceptional piece of hardware...
After about a month of flawless operation my "new" computer started to act a little strangely. It wouldn't always go to sleep when it was scheduled, the screen saver wouldn't always come on by itself...things that I though a simple PRAM reset, SMC reset, or disk permission repair would fix. After countless attempts at all three "fixes" I was still having problems...a few days after these problems started occuring something even more drastic happened: My computer would turn on (the little light would come on, I'd hear the fans start running and the start up tone) but the screen would remain black. I tried several PRAM and SMC resets as suggested on this forum, but the screen continued to come up black for about an hour. That's when I called Apple.
The Apple Care specialist on the phone asked me for the serial in which I had to lift the computer up to get (since I obviously couldn't read it off the screen). She suggested an SMC reset which, I explained to her, I had tried already but it hadn't worked, however, I was willing to give it another shot. Oddly (and rather annoyingly) enough it worked, and for a short amount of time I was happy...until it happened again...another call to Apple...and again...and about 3 or 4 calls to Apple Care later, they suggested that I go in to an Apple Store to have it looked at.
The Apple Specialist made an appointment with me to meet with an Apple Genius the next day at 4:30PM at a store about a mile away from my house. The next day I lugged my 24" iMac through the local mall (I'm female, 5'2", and I weigh about 108 so it wasn't too easy of a feat) to discover the apple store was CLOSED for the next few days so that they could "make the store better." I called Apple Care on my cell phone right there in the mall and asked them what was going on. Didn't they know that this Apple Store was closed? The man I was talking to said that they knew and he wasn't sure how the person I had talked to just the day before had signed me up for an appointment when he hadn't even asked for my e-mail address. It was most bizarre. This man made an appointment with me for later that same day at an Apple Store about 45 minutes away from where I live. I didn't want to go, but I'm a college student and I was a desperate for my computer to work again.
Shaking around in that box must have brought it out of it's strange seized-up state because as I brought it out for the Mac Genius to look at it turned on for him no problem. Quite a frustrating problem because it's so spontainious that it keeps making me look like either a liar or a fool. He said he'd run an 8-hour diagnostic check on it and I could pick it up the next day. So the next day I waited for their call but I got none. I called them and they said that they were still running tests and it'd be ready the next day. The day after, about an hour and a half before I had to go to work, they called me and told me my computer was ready. They said they had ran a 24-hour diagnostic and everything was working fine but they said they'd run more tests if I wanted them to. I'm a full-time college student and I need my computer for just about all of my classes, so I declined more tests and told them I'd pick it up right away. I dashed over there to pick it up and dashed back as fast as I could (and I even made it to work on time...but just barely). Later that night I found that they had accidentally left their diagnostics CD in my computer (I called them about it and they said that would like it if I would bring it back...I still haven't mailed it).
All was fine and good (well, just okay...it still had problems with its sleeping and screen-savering) with my computer until yesterday. I got that black screen again upon start up....but this time my "fixes" worked after a few tries. There were no more problems for the rest of yesterday.
However, today I came home from school and go to start up my computer and the screen turned on and I saw the little mac symbol and that little circle of bars...but then it froze. I held in the little button to force a shutdown and when I started it back up again I was greeted by my good old friend, Mr. Black Screen. Just wonderful. I tried my "fixes" but today I didn't get lucky. So while I was holding in the button to start up my computer (again) and give it another go, I held it longer than I was supposed to and the little on light began flickering. Then I heard this unpleasant tone that lasted a few seconds before stopping and treating me to the startup sound. This time the screen turned on. Yay! I go to call Apple to find out what I had just done, and I find out that my 90 days are up and unless I wanted to pay $50 for them to be puzzled by my issue once more or give them $300 for not quite 3 more years of service, I'd have to lug my computer to an Apple Store or post here to get help. Thanks a lot Apple Care.
My "new" computer cost me almost $3,000. It should work the way it's supposed to. I need it to last me no less than 6 more years, but with the problems I've had with it in the first 3 months (which seem only to be getting worse and more frequent), I don't know if I'm expecting WAY too much out of it. I've been a loyal Apple user for 13 years and out of the 5 computers I've had in that time I've never had so many problems (actually I've never had any problems, at least nothing really serious; I'd never even called Apple Care before this). I'm a fairly experienced user (I'm not a Mac Genius or anything, but I know the ropes) and I am sure this is not normal behavior for an Apple computer (or any computer of that matter).
I'm so frusterated I'm not sure what to do. What's wrong with my computer? How can I get Apple to help me? How can I get Apple to even believe me? Any advice would be greatly appreciated and thank you so much for reading my very long (and rather dramatic) story.

Thanks for reading and thanks for the advice. Perhaps I'll ask them about it next time this problem occurs, although carrying the thing through a mall that is only about a mile away is the least of my worries. I'll do if it is both free (I don't make enough at my job to pay for such a service) and relatively speedy, although I'd hate for them to come over and for the computer to work properly (as bad as that sounds). It'd be a wasted trip and nothing would get fixed.
I'm contemplating videotaping myself performing my "fixes" on it the next time I have this problem.

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it a

Since purchasing the Note 3 in October i have had nothing but issues. I went through all the steps and eventually I was sent a different phone, which was working for the most part until the recent upgrade. Now I am back to the old issues, no service, it actually says not moblie network available, when everyone else in my family has coverage and are on my plan with iphones. I am missing text messages and dropping calls left and right. This is unacceptable for the cost of this phone and my service. I have did a hard reset etc. What else can I do??

Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

Just repaired cracked iPhone 4 screen and now part of the screen isn't working.

A few days ago, I cracked my iPhone 4's screen pretty badly. I was having absolutely no trouble with the screen after I cracked it, aside from the crack, of course. I just got the screen repaired yesterday and now the bottom left part of the screen sometimes doesn't work. When I'm using the keypad, the following characters are affected:
RDFCX (and sometimes E) 4 ; , } ~
Also, sometimes, when I press that part of the screen, it's as if the phone doesn't recognize my touch. This is affecting scrolling, the ability to move the cursor, and makes it hard for me to unlock my phone because sometimes the bar along the bottom won't slide. However, when I select apps using that portion of the screen on the home screen, it works just fine.
This started yesterday, about 2 hours after I got my screen fixed, then went away on its own a few hours later, and came back this morning.
Does anyone know what this problem is/ what I should do about it? I'm definitely going to go back into the store that fixed my phone and see if they can correct it.
**I did not get my phone fixed at the Apple store, I went to a store called BuyNCell which specializes in repairs of Apple and Blackberry products. I got my screen repaired as well as changed the casing on my phone to white.
Hopefully someone can help explain to me what's going on. Thank you!!
If it really matters, here's what my phone looked like before it was repaired. Yikes!

This may sound crazy, but download any free app. This often "shocks" the other apps into working.

HT1688 my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August

my device was not registered as part of the Developers Program and now my devices are not working, i can not restore nor update my devices... any suggestions? i was running my devices on iOS 7 Beta that i downloaded back in August

If you're not a registered developer, it means you've stolen Apple's software. Now you come to an Apple forum and ask for help? You're lucky you're not being prosecuted!
You can receive no help for stolen software here. Enjoy your iBrick.

I dropped my ipod in water and it got in the crack that isnt on the touch part of the screen but more towards the top, now the screen won't work

I recently dropped my ipod and the part above the touch part of the screen shattered to were you could see one of the screws in the top left corner. i dropped the top part in water and caught it before it could go more than half way in but the water got into that part. the screen will turn on and change but the touch part wont work. all the buttons are working though. Please helppp!!!!!!!!!!!!!!!!!!

Dry it is rice as described here:
How to fix a wet iPod or iPhone | eHow.comfix-wet-ipod-iphone.html
Just let the battery die if you can't turn it off.

HP Deskjet 5160

HI,
I am stuck! Windows 7, Printer stopped working, so I uninstalled it, then reconnected my USB and now there is a printer "HP Deskjet 5100" but it does not work, AND it does not have the "Remove" option in the right click menu, like the other printers do, in the right click menu exclamation mark next to "Troubleshoot" but Troubleshoot does not show up any problems.
Can not find ANYWHERE on the internet to download the printer driver, as all sites indicate the drivers are already present on Windows 7 machine and it should auto- install when I connect USB cable.
When I uninstalled the original HP Deskjet 5160 printer, I clicked a checkbox "delete printer files" so I guess that the files are no longer on my machine for the Printer Drivers to be auto-installed on connection of USB. But where can I download them?!!
The Printer (says it is a HP Deskjet 5160 but windows 7 seems to recognise it as a Deskjet 5100 - same thing??) is not installed/configured properly but I can't uninstall or remove it and can't find a driver to download!
I'm stuck, please help!
Thanks,
Maggie.

Hi Maggie,
Let's try removing all the driver files from your PC and install them fresh. First download the full driver and run it.
Then do the rest below.
To remove all the driver files here's how to do it:
If you've tried to install the full driver previously, then you will be able to find the extracted files in your PC.
I believe it should be here:
- Open Windows Explorer -> C:\ drive -> Users -> (Your Name or Account) -> AppData -> Local -> Temp
- Under 'Temp' click on every folder until you find the folder containing the driver installation files. Should be able to spot it by finding
this file: "DJ_AIO_03_F4200_webreg"
Once you've found the folder, go to 'util' -> ccc. Now click on the file "Uninstall.bat"
The uninstall program will run and be able to remove all the files from your PC. Make sure this runs smoothly with no errors.
In the case that you do run into one, go back to the folder and run these files one after the other:
- Uninstall_L1.bat
- Uninstall_L2.bat
- Uninstall_L3.bat
- Uninstall_L4.bat
The program will reboot after each file. So bear with it.
Once this is all complete, try installing the full driver again.
Let me know how this goes. Fingers crossed!
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

My ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

my ant video player after i updated to firefox four is now in the upper part of the screen where it opens up and i cant find out how to fix it

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

HP Deskjet 5160 is now working... Part of the 5100 series

Similar Messages

Maybe you are looking for