Hp eprint set up issues with non hp printer

HI
I have a hp pavillion p7 1414pc desktop with windows 8. There are also 3 laptops in the house that are Toshibas. Two use also windows 8 bought the week after the desktop one is a year and a hapf old using windows 7. They are all networked for various reasons.
Have a Epson workforce 635 all in one that is not too old - year or so that works like a dream and is also networked. Can print from the laptops without a problem. However can not print from the desktop. When it was installed it went right to this eprint set up. Not real familiar with it. I have read the instructions. There is not an icon on my Epson as it keeps referring to. I have the ip address and i typed it into a browser as it has said. While i get a window of information there is not HP Web Services Tab it says will be there. So i am not getting this printer code to in turn get the customized email address. I find it odd that my laptops will print wirelessly but the one plugged in - wired - to the printed i can not print from. I did go to Epson and download the windows 8 drivers for the printer and installed those.
Any suggestions would be greatly appreciated. I will not go buy a new printer when this one works like a champ and is windows 8 compatable. Thank you!

Hi,
HP and Epson are two companies, they may have something similar but we can't use HP ePrint to setup an Epson printer.
Hope this makes sense.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Issues with connection and Printer

Hi guys,
I have two issues going on, but one of them is not related to security but I want to through out there to see if anybody can answer it or suggest me an appropriate thread.
First question:
Can anybody tell me how set up a printer in ECC 6.0, Please tell me step by step. Its related with iw32 and printing. Please explain over all I never setup printer through SAP.
My another question is more of a Basis question since I cant find a basis thread Im posting here,
The developer trying to connect to courion but some how the Courion connector did not work so we added sap_all, sap_new to the courion ID but it worked once and then its not working again.
I was wondering if anybody has any idea about this. Please give me some thought or recommendation. (Courion is some other software)
Thank you so much for any help in advance

Replacing your wireless router now try.
http://www.hp.com/global/au/en/wireless/reconfiguring-system-help3.html
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Paper Size issues with CreatePDF Desktop Printer

Are there any known paper size issues with PDFs created using Acrobat.com's CreatePDF Desktop Printer?
I've performed limited testing with a trial subscription, in preparation for a rollout to several clients.
Standard paper size in this country is A4, not Letter. The desktop printer was created manually on a Windows XP system following the instructions in document cpsid_86984. MS Word was then used to print a Word document to the virtual printer. Paper Size in Word's Page Setup was correctly set to A4. However the resultant PDF file was Letter size, causing the top of each page to be truncated.
I then looked at the Properties of the printer, and found that it was using an "HP Color LaserJet PS" driver (self-chosen by the printer install procedure). Its Paper Size was also set to A4. Word does override some printer driver settings, but in this case both the application and the printer were set to A4, so there should have been no issue.
On a hunch, I then changed the CreatePDF printer driver to a Xerox Phaser, as suggested in the above Adobe document for other versions of Windows. (Couldn't find the recommended "Xerox Phaser 6120 PS", so chose the 1235 PS model instead.) After confirming that it too was set for A4, I repeated the test using the same Word document. This time the result was fine.
While I seem to have solved the issue on this occasion, I have not been able to do sufficient testing with a 5-PDF trial, and wish to avoid similar problems with the future live users, all of which use Word and A4 paper. Any information or recommendations would be appreciated. Also, is there any information available on the service's sensitivity to different printer drivers used with the CreatePDF's printer definition? And can we assume that the alternative "Upload and Convert" procedure correctly selects output paper size from the settings of an uploaded document?
PS - The newly-revised doc cpsid_86984 still seems to need further revising. Vista and Windows 7 instructions have now been split. I tried the new Vista instructions on a Vista SP2 PC and found that step 6 appears to be out of place - there was no provision to enter Adobe ID and password at this stage. It appears that, as with XP and Win7, one must configure the printer after it is installed (and not just if changing the ID or password, as stated in the document).

Thank you, Rebecca.
The plot thickens a little, given that it was the same unaltered Word document that first created a letter-size PDF, but correctly created an A4-size PDF after the driver was changed from the HP Color Laser PS to a Xerox Phaser. I thought that the answer may lie in your comment that "it'll get complicated if there is a particular driver selected in the process of manually installing the PDF desktop printer". But that HP driver was not (consciously) selected - it became part of the printer definition when the manual install instructions were followed.
However I haven't yet had a chance to try a different XP system, and given that you haven't been able to reproduce the issue (thank you for trying), I will assume for the time being that it might have been a spurious problem that won't recur. I'll take your point about using the installer, though when the opportunity arises I might try to satisfy my cursed curiosity by experimenting further with the manual install. If I come up with anything of interest, I'll post again.

Issue with XML report printing on R12 instance

Hi,
I'm facing issue with printing xml reports on R12 instance and followed the note (How To Print XML Publisher PDF Reports Via The Concurrent Manager:metalink id:338990.1) and configured the pasta printer,still printer output is showing the junk charcters.
Please let me know how to resolve the issue?.

Hi Hussien,
We are on 12.1.1 / 11g with AL32UTF8 character set, we have custom reports developed in BI publisher and some some migrated reported from earlier version.
Both BI publisher based custom like PO/Invoice/Cheque Print & seeded reports like "Active users/responsibilites" are being generated successfuly in pdf output. when copied to desktop and printed it prints properly. But when trying to direct output to printer from concurrent request it is printng junk.
I checked pasta configuration, all required ghostscripts tools are on the AIX box, am I missing anything in R12?
Regards

Issues With Adobe XI Printing

I recently installed Adobe XI on my desktop (Win 7), and am having issues with printing.
If the printing size is set at 100%, the only pages that print are the first and last page of some pdf documents.
With other pdfs, I have to resize it to 76% for printing, in order to not have the top and bottom cut off.
I did not have any of these issues before this latest version was installed.
Any suggestions? Solutions?

Hi fuzzi%20p,
Could you please let me know if you have checked for updates to use the latest patch of Adobe Reader XI i.e. 11.0.10
Also, tell me if you have set Adobe PDF as your default printer (under Start> Devices and Printers)
Let me know.
Regards,
Anubha

Issue with ALV grid print preview/spool

Hello everyone,
I am working on a report and I am having some issues with ALV grid. Currently in our DEV and QA environments the user can run the report, view the ALV grid, and print the grid without any issues.
However this isn't the case in the Prod environment. The user is able to run the report and view the grid without any issues. But when they click print preview or click print, the spool is incorrect. It shows the proper values from the grid, but the first field is reduced in length. Rather than showing a numeric field of length 10 it shows 99999999# or 99999999...
The programs are identical through every environment, including user parameters, formats, and spool settings. I have been told printing grids may have some issues, does anyone have any advice or dealt with this issue before?
I appreciate the help.
Thanks,
C

I was waiting to hear from the functional team on the matter and no one has mentioned any more issues. I am assuming the problem is solved. I just noticed the thread was still un-answered and wanted to give an update.
Thank you for you help Vijay.
Regards
C

Script issue with multiple lines printing

Dear All,
I'm trying to print multiple lines of my internal table in a script.
But only the last line is being printed all the time in all the lines.
Attached is my code.
    CLEAR GS_REGUP.
    LOOP AT GT_REGUP INTO GS_REGUP.
* Start the Form
      CALL FUNCTION 'START_FORM'
        EXPORTING
          ARCHIVE_INDEX = TOA_DARA
          FORM          = 'ZFORM'                                    "T042E-ZFORN
          LANGUAGE      = SY-LANGU                          "T001-SPRAS
          STARTPAGE     = 'FIRST'
          PROGRAM       = 'ZPROG'.
* Net Amount
      CLEAR GV_NETWR.
      GV_NETWR = ( GS_REGUP-WRBTR - GS_REGUP-PSSKT ).
* Print the Content
      CALL FUNCTION 'WRITE_FORM'
        EXPORTING
          ELEMENT = '525'      "Header
          FUNCTION = 'APPEND'
          TYPE     = 'BODY'
          WINDOW   = 'MAIN'.
* End the Form
      CALL FUNCTION 'END_FORM'
        IMPORTING
          RESULT = ITCPP.
      IF ITCPP-TDPAGES EQ 0.       "Print via RDI
        ITCPP-TDPAGES = 1.
      ENDIF.
    ENDLOOP.
Please let me know the flaw in it.
Regards,
Deepu.K

Dear All,
As i Mentioned in my earlier post, the same coding working fine in Quality server --> Printing multiple lines in script output.
But now, I have the same reqt. in another window.
So, I did the same coding.
But, this time it's printing the last line of the internal table in all the lines.
This is happening in Quality Server only.
The only difference between the previous internal table and this int. table is:
1. The first int. table content is printing in MAIN Window. ---> working fine
2. The second int. table content is printing in VARIABLE window. ---> NOT WORKING.
Can any one tell me what's the issue with this ?
Regards,
Deepu.K

LINK Excel.Sheet has issues with Non-English Office

In non-english office when we issue
LINK Excel.Sheet.12 command, the range parameter is causing "Error! Invalid Link" error (¡Error! Vínculo no válido in spanish).
Example if we do:
{LINK Excel.Sheet.12 C:\\Temp\\Text.xlsx Test!R1C1:R2C2 \a \f 4 \h}
We get invalid link error (in spanish).
But when we remove the range parameter:
{LINK Excel.Sheet.12 C:\\Temp\\Text.xlsx \a \f 4 \h}
It works. This of course by default links only the first sheet by default. Anyone knows if this is a bug in Office for non-english? We are using Office 2010.

Hi V.C.A,
Based on your description, it seems that your issue was related with the field link feature of the Word, and this forum is mainly discussing about the Word development questions related to VSTO, VBA and .etc. For your issue, I will recommend you going to
the forum below for help:
http://answers.microsoft.com/en-us/office
Thanks for your understanding.
Best Regards,
Edward
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click HERE to participate the survey.

Having plug-in/install/set-up issues with Disney Pirates of the Caribbean on-line.

I am having issues trying to install Panda3D game plug-in at Disney's Piratesonline.com. I get into a iterative install/restart loop. No issues installing in IE 8.0. OS - W7, browser - Firefox 4.0

Rhoov wrote:
After going through the set up I am getting the green light on the airport extreme, but it will not connect to the internet.
Welcome to Apple's discussion groups.
I have my internet either cable coming out of the modem and plugged into AP Extreme. If I plug the cable directly into the back of the iMac I can access the internet that way with no issies.
Is that cable connected to a broadband modem? If so, when switching what device is connected to that, you should power down that modem for several minutes, then power it back up. Without this process, some modems will refuse to connect to a different device.
I had to configure my Network preferences, and turned on the Airport2 (for some reason when I try to turn on Airport it will not turn on.
There are ways to reset all that, but first let's try to get things to work.
Any ideas why?). So I get an error code that pops up stating that I do not have a good IP address. The address for the router is 10.0.1.1 and the IPv4 address is showing 10.0.1.2.
The IP address of what? (Where do you see that?)
The error box that pops up states: 10.0.1.1 in use by 90:84:0d:d3:7a:5b.
The value starting with "90" is a "MAC address" (not to be confused with "Mac", i.e. "Macintosh"). That address is in a range assigned to Apple. Apple calls a MAC address assigned to a WiFi interface an "AirPort ID". You can identify the AirPort ID of an AirPort Extreme either from the value embossed on the case or in AirPort Utility. You can identify the AirPort ID of a Mac either in the Network panel of System Preferences (select the AirPort connection item, then click on the Advanced button) or in System Profiler (Apple menu -> About This Mac, More Info, Contents -> Network, Active Services -> AirPort, Ethernet: MAC Address).
Where do you see that message? What is running at the time?

Captivate 4 & moodle. Issue with non-quiz SCO's

We are using Captivate 4 and moodle 1.9.5+.
Here's the issue: How do we set up a SCO in Captivate that does NOT include any sort of quiz to report a score?
Because we can't get bookmarking to work properly from Captivate SCO's to moodle, we have had to break apart our course into sections. Now the course consists of something like "lesson1 SCO" and "lesson1quiz SCO", "lesson2 SCO" and "lesson2quiz SCO", etc. The lesson SCO's are just information presented to the student and the "lesson#quiz SCO" are just quizzes.
The quiz SCO's are reporting the correct grades to moodle and being stored in the gradebook but we can't figure out what settings to set the lesson SCO's to, in order to report a score of 100. Currently, these lesson SCO's are reporting a score of "0" which is affecting moodle course averages score.
The only way around this that we have found is to add the lesson# SCO's into moodle as IMS Content Packages and therefore not scored and the lesson#quiz SCO's as activities and therefore scored. The problem with this method is that we can't require the students to take the lesson# SCO's.
Is there anyone who has come across this problem before and knows a solution?

Hi there
Just stabbing in the dark here. What if you added a button on the last slide? Configure the button to report and assign it a value of 100 when clicked?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Set up issues with new Hard drive

Hi all,
I bought a new hard rive for my late 2008 aluminium macbook. I've got it booted and had issues restroing from time machine back up using the REcovery partition. Such research showed this is an issue and said I should just use migration assistant or via the usual set up when rebooting my macbook with the new hard drive in.
Unfortunately the keyboard does not seem to be responding well of at all and I get stuck part way through the set up process and cant even get to my desktop now.
Any ideas about what is happening and how to solve this???!!
Many thanks,
Greg

time machine backups are specific to the mac that creates them, since you had the HD replaced the time machine thinks it's a different mac therefore it won't let you "restore" the data to the mac. that is why you have to "migrate" from the time machine backup to restore it.
this is done either using migration assistant or during the setup assistant (whichever applies in this case)
if the wireless keyboard is not connecting properly, i would suggest using a USB keyboard and mouse to get the data restored and then go into settings and figure out why it's not connecting correctly.
following article tells how to migrate from time machine backup:
http://support.apple.com/kb/HT4500
hope all goes well for you!

G3 CD boot issues with non Apple keyboard?

I recently bought an iMac G3 350MHz that won't boot all the way into OS 9.1. It says there is an error with extensions and to restart, holding Shift to disable them. I did and I am greeted by the same message. I'm using a Logitech USB keyboard and wondering if that has anything to do with it.
I've tried booting from an OS 9.2 disc with no luck. I'm holding C at boot (before and after I turn it on). I have tried Command-Option-Shift-Backspace and Command-Option-O-F ...AND holding space to eject the disc and that won't even work. So now I have a sick iMac with an OS 9.2 disc stuck in it and I have no clue what to do next. I'm thinking since none of the keyboard commands work, it might be that the Logitech keyboard isn't supported till the OS boots. Since it doesn't have Firewire, I can't try Target Disc Mode...not that I have an available Firewire drive either.
Any suggestions would be very much appreciated. I was hoping it would be a simple fix but now I'm ready to throw it out.

Glad to hear the Al keyboard's OS specs don't make it a "no-go." Looks like a nifty bit of kit.
The CD is a backup from a friend.
Could be the heart of the problem from the start. And using a friend's disk would be a EULA violation unless that system isn't currently installed on any of his computers.
Tiger (10.4) WILL work on a G3 but your lack of a DVD drive and FireWire ports (for using FW Target Disk Mode to get around the DVD limitation) does present a problem. It's possible to get Tiger on without the DVD drive as illustrated in this article:
http://www.oreillynet.com/mac/blog/2005/05/thecats_mustachesinstalling.html
but it would be easier if your iMac had FireWire. The only part of the article that's incorrect is that the Media Exchange Program expired some time ago.
Panther is still out there with third-party resellers but you have to be careful in buying it. Full retail install disks are black with a big silver X and come on CDs, not DVDs. Gray disks are machine specific restore disks and may not have all the stuff your computer needs, aggravating the whole process. If you order a full retail install set and receive gray disks, send them back.
Before installing OSX (and I mean BEFORE), you have to update the firmware on your iMac to 4.1.9 while still in OS9. The process is relatively simple and full instructions are included with the download here:
http://docs.info.apple.com/article.html?artnum=75130
Failing to do the firmware update before attempting an OSX install can have serious consequences. If the firmware has already been updated the 4.1.9 updater will politely tell you that it's already there.
Allan

FTP Adapter : Issue with Non English Text.

Dear All,
We are trying to read a file which contains Korean Language and write into a different folder in a CSV format.
The output file contains "???" inplace of Korean text.
We can see the invoke to FTP adapter contains Korean text as part of it's input. But the CSV file contains "???"
<FinalTradeCardList>
<imp1:FinalRows>
<imp1:C1>NO</imp1:C1>
<imp1:C2>사이트코드</imp1:C2>
<imp1:C3>사이트명</imp1:C3>
<imp1:C4>승인일자</imp1:C4>
<imp1:C5>주문번호</imp1:C5>
<imp1:C6>주문자</imp1:C6>
<imp1:C7>주문자연락처</imp1:C7>
<imp1:C8>카드종류</imp1:C8>
<imp1:C9>승인번호</imp1:C9>
<imp1:C10>거래상태</imp1:C10>
<imp1:C11>거래상태일시</imp1:C11>
<imp1:C12>할부</imp1:C12>
<imp1:C13>거래금액</imp1:C13>
<imp1:C14>비과세공급가액</imp1:C14>
<imp1:C15>과세공급가액</imp1:C15>
</imp1:FinalRows>
</FinalTradeCardList>
What needs to be done in BPEL to get Korean Language text in CSV file.
Thanks,
Sid.

Thanks for your reply.
I used the character set as you suggested.But it is not getting converted correctly.
Actual Value : (유)라이프테크놀로지스코리아
Converted Value : ( $)C @/ ) 6s@LGAEWE)3n7NAv=:DZ8.>F
I tried all others that are mentioned in the document. Still i am seeing different values. I am not getting the actual value.
But in BPEL i see correct value getting passed to FTP Adapter.
The character set is in XSD. Please find it below..
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
            xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
            xmlns:tns="http://TargetNamespace.com/DeleteMe"
            targetNamespace="http://TargetNamespace.com/DeleteMe"
            elementFormDefault="qualified"
            attributeFormDefault="unqualified"
            nxsd:version="NXSD"
            nxsd:stream="chars"
            nxsd:encoding="ISO-2022-KR">
<xsd:element name="Root-Element">
    <xsd:complexType>
      <xsd:sequence>
        <xsd:element name="Row" minOccurs="1" maxOccurs="unbounded">
          <xsd:complexType>
            <xsd:sequence>
              <xsd:element name="C1" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
              <xsd:element name="C2" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
            </xsd:sequence>
          </xsd:complexType>
        </xsd:element>
      </xsd:sequence>
    </xsd:complexType>
</xsd:element>
</xsd:schema>
Please review the above and help me in resolving this issue.
Thanks,
Sid.

Issue with non-english application in thin client - virtual directory issue

Hi,
I have just completed Siebel 8 installation on solaris machine along with SunOne Web server 6.1.
I have installed both ENU and ARA language packs for Siebe Enterprise, Sweapps.
The issue is after installation and repository installation for both ENU and ARA, I am able to open only ENU applications in thin client.
When I try to open the ARa applications the browser gives "Page not found" error.
I have verified first, whether the Siebel components running or not. Confirmed that for example for Callcenter SCCObjMgr_ara component is active and online.
But what I observed is, in SUNOne web server instance's config folder, there is a file obj.conf.
In this file there are entries for only enu applications like,
NameTrans fn="pfx2dir" from="/callcenter_enu" dir="/siebelapp/sweapp/public/enu"
There are no links for ARA applications.
I think this could be the reason for issue.
But while installing and configuring sweapps, I have selected the logical profile location as "/siebelapp/gtwysrvr/admin/Webserver".
So this should create such links in obj.conf for ARA as it created for ENU apps. But it didn't happend.
Please advise, how to get the ARA applications.
Thanks
Vamshi
Edited by: user4619223 on Mar 23, 2010 11:36 AM

I see some message about a proxy. Have you checked that you can use the proxy from you network?
If not you should turn the proxy off.
Timo

Issue with non calculated column in a fact table

Hi All,
With 3 facts(Fact1,Fact2,Fact3) and 2 Confirmed Dimensions my joins work fine in Criteria when I include All calculated columns from facts. If I try to include a non calculated column from Fact1(Which is a number Data type) Columns from Fact2 and Fact3 show Null values. I know it is not recommended to include dimension columns in fact , does OBIEE not support Number type non calculated columns as well? Is there any work around that I can bring in my non calculated column from Fact and still get results for other fact columns.Iam at 11.1.1.7 of OBIEE
Let me know if Iam not clear.
Your help is much Appreciated.
Thanks,
Vineela.

i would like to add 2 fields into my fact tables - LOAD ID (populated by a sequence during each load) and LOAD DATE.
as these fields are not related to any reporting dimensions, it is still possible to add them in OWB ? the fact wizard always ask for a foreign key to a dimension ...
Duncan,
If you want to add non dimensional attributes to a fact by using OWB, you can create additional measures to it and use them as attributes.
Igor

Hp eprint set up issues with non hp printer

Similar Messages

Maybe you are looking for