HP injet all-in-one 4315

I was trying to set up my printer to my new PC. My disk says it is for Windows 98,ME, 2000, XP. My operating system is  Windows 7.  Does HP offer a updated disk that supports Win 7 or am I going to have to purchase new printer/ Are there other options?  Just got a new job (online) and I need answeres ASAP.  Can anyone help?
This question was solved.
View Solution.

WMleary,
   There is no full feature software for this printer for WIndows 7....but it has an in-OS driver.  So if you just plug in the usb cable it should load the driver for it.  Here is a link to a document that might help
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796736&cc=us&dlc=en&lc=en&os=4063&product=113...=
I was an HP employee
If I have helped you solve your issue please mark it as solved
**Say Thanks By Clicking on the Kudos Star**

Similar Messages

  • HP Officejet 4315 All-in-One

    I have an HP Officejet 4315 All-in-One that I bought several computers ago.  I now have 2 computes that have Windows 8.1 on them, and the installation disc is for Windows 2000 and Windows XP.  The installation disc says that my system doesn't have what it takes to load this printer, and I can't seem to find a driver that will work.  I have run the HP software that checks your printer, and it prints and scans on the test run.  It will scan off my computer and allow me to save to my computer.  It will not print what I personally scan.  It makes copies independent of the computer. 
    I think I need a driver.  I don't understand why it prints on the test run by HP, but won't do it off my information on my computer.  Any ideas? 
    It is out of warranty and basically there isn't anything wrong with it except it doesn't go with Windows 8.1.

    Hi @dgclmn51 
    Although there is no full feature software and driver for the officejet 4315, you can still use the printer with the computer.
    Please use the following document to learn more; Install a Windows 8 Driver with Windows Update.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • My HP Officejet 4315 All-in-One does not print

    My HP Officejet 4315 All-In-One printer does not print althoug it is connected to my laptop and working properly
    The dial shows the word FAX instead of PRINT.  How can I remove the word FAX? because I think this is the prolem
    Any one with info pls email me at:[edited email by moderator]  Thanks,  pedrodomenech

    Hello  @pedrodomenech , and welcome to the HP Forums, I hope you enjoy your experience!
    I can see you're running into fax/print issues.
    I would love to help with that, but I need a little information to try and help you first. I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Cleaning print head HP Officejet 4315 All-in-One Printer support

    Hi,
    I'm having a problem with my 
    HP Officejet 4315 All-in-One Printer.
    I'm using Windows 8 and have topped up the ink levels. The printer is printing with white lines which I understand indicates that the print heads need cleaning.
    All the advice I can find online says that to run a print head clean from your computer you need to go the printer in control panel > select printer properties > then click on the 'maintenance' tab.
    Using Windows 8 it appears there is no "maintenance" tab and I cant find any option to clean print heads elsewhere on the properties tab!
    Not sure where to go from here?
    Many thanks for your help in advance.

    That is the only way you can clean the ink cartridges. I would recommend contacting HP technical support for further assistance. Click here to find out: HP Worldwide Contact.
    Good luck.
    I worked on behalf of HP.

  • Printing problem - HP Officejet Pro 8500 Wireless All-in-One Printer, Red color fads on 4th copy

    I have an HP HP Officejet Pro 8500 Wireless All-in-One Printer, and am trying to print 75 copies of a program for our event. After the first 5-6 pages the RED in my program starts to turn magenta. I have brand new HP ink, and am printing on HP Color Injet Paper. I have renectly replaced the Black/Yellow printhead (at least 6 months ago). At first when I cleaned the printheads, I could print 2 or 3 pages showing my RED color. Then turns back to magenta. When I received the test patterns after cleaning the print heads they are all perfect with no lines.
    What is going on and how can I fix it?
    This question was solved.
    View Solution.

    Hi TM1997,
    I understand you have an Officejet 8500 Wireless that is not printing red properly, it keeps turning to magenta. I'm sorry to hear this, but I will definitely do my best to help you!
    As I'm sure you saw, when replacing the black and yellow printhead, that there are two printheads in the Officejet 8500 and the second one controls the magenta and cyan. I would suggest that you first have a look through this Troubleshooting Print Quality Issues document. You can also manually clean your printhead with the steps in this 'The Following Printhead Appears to be Missing or Damaged' or 'The Following Printhead has a Problem... document.
    Hope this helps, have a great day!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • How do i use my mac book with my HP 6510 e all in one series printer

    how do i use my mac book with HP photosmart 6510 e all in one series

    Hello Marilynatsea,
    Thanks for using Apple Support Communities.
    To learn more about printing in OS X on your Mac, and how to add a printer, take a look at the article linked to below.
    Mac Basics: Printing in OS X - Apple Support
    Cheers,
    Alex H.

  • I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album?

    I have photos I want to group together in one album, but can't do this because some may have the same number. How can I combine them all into one album? I was trying to move several albums onto a USB drive and it stated all other files exist at this location.  They are pictures taken at different times and have the same number I guess.

    In iPhoto albums may contain photos with the same file name - iPhoto handles that just fine
    If you are exporting them to move somewhere else use the sequential file name feature of export to give each file a unique name
    LN

  • How can I use Active Print on my Ipad and print to my usb connected HP officejet 6110 all in one

    I was previously able to use Active Print on my Ipod to print to my usb connected HP officejet 6110 all in one.  Now, however, with my Ipad version 2 I can no longer get this to work.  Can anyone help?  Thanks.

    Hi,
    HP do not provide any USB connection solution for iOS.
    As Active Print is a 3rd party application which provide this functionality, i believe you may find a better help within Active Print support as they more familier with their application requirement and functionality:
    http://www.activeprint.net/support/
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HT2589 We have purchase 5 apple minis and would like them all on one account.  That way we can monitor the use of these units.  they will be used strickly for a business application.  can I use one account in itunes or must i have multiple.

    We have purchased 5 apple minis and would like them all on one account, that way we can monitor the use of these units.  They will be used strickly for a business application.  Can I use one account in itunes or must i have multiple.

    Not going to happen the way you want it to.
    When you add a gift card balance to the Apple ID, it's available for the Apple ID.
    Probably best to create unique Apple ID's for each... this will also make things easier in the future as purchases are eternally tied to the Apple ID they were purchased with.

  • How can I print to hp photosmart all in one 7280 from ipad

    How can I print to hp photosmart all in one 7280 from ipad
    This question was solved.
    View Solution.

    Hi,
    Although the C7280 is not AirPrint enabled, you may still print through the local network using the HP ePrint mobile app.
    you may find the steps to get and use the app in the following document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02775166&cc=us&dlc=en&lc=en&product=3204785&tmp...
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Photosmart Premium All in One Blue screen error B882B1C4

    I have recently purchased a Photosmart Premium All in One C309G machine which is connected via a USB cable to the PC. When I try to use it wirelessly it produces a blue screen with an error message B882B1C4 as soon as I switch on the BT hub. HP haven't been able to sort out the problem as I am now in  receipt of the 4th replacement . Can anyone suggest a solution please?  I have a BT1800HG wireless hub connected with an ethernet cable to my HP PC.

    This is posted in your separate thread:
    Hey there. I would try a power reset to fix the issue.
    Press the Power button ( ) to turn off the product.
    NOTE:The product might not turn off after pressing the Power button. Continue to the next step regardless.
    Disconnect the power cord from the back of the product.
    Disconnect the power cord from the electrical outlet, and then wait 30 seconds.
    Connect the power cord to the electrical outlet.
    Connect the power cord to the back of the product.
    Press the Power button ( ) to turn on the product.
    If this does not solve the issue then the printer will most likely need to be serviced.Hope this helps!
    -SeanS
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • All in One Printer no longer scanning (C5280)

    I have an oldish printer/scanner that was working fine until I downloaded the update that came from HP on Aug. 13th. Since then, I cannot scan. I got an error message that the machine was disconnected from the computer which made no sense since I can print from the computer just fine. I did all the things the error message suggested: rebooting, disconnecting the cable, redownloading the driver. The machine worked for about 5 pages of the scan after the redownload, then conked out again.
    I saw some directions about going into the registry editor window but they were for Windows 7 and below. I have Windows 8. I did not see a folder for Digital Imaging in the HKEY_LOCAL_MACHINE/Software/H-P
    If there are updated directions for Windows 8, pleae let me know.
    I have an All in One Printer (C5280)

    Hello @Toonces , and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are experiencing scan issues.  I would like to try and help.
    I would suggest Uninstalling the Printer Software.
    Once it is uninstalled, I would suggest putting your system into clean boot mode within the Microsoft configuration.  You can do so by following this document: How to perform a clean boot in Windows.
    Once the computer is in clean boot mode, I would suggest reinstalling the HP Photosmart C5200 All-in-One Printer series Full Feature Software and Driver.
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Officejet Pro 8600 e-All-in-One

    i have buy and paid this printer in chain shop in country where i also try to buy new cartridges in same shop as sold me this "all in one",,,,BUT THEY DONT HAVE AND WILL NOT order home cartridges for this product,,, so i wonder if this is also HP´s offical politic,,  (not to have spare parts for there products???????????  because then i think i must find way to WARN other to buy HP products in this country....
     So what to do??
    so fare i have buy refilled cartridges on internet shop,, because  believe it ore not i have this "all in one" not as an decorative piece ( wich i definitive NOT think it is)...
     and now this "all in one" tell me i have got a problem?? NICE telling me that,, i guess HP do this because they think i have not found out that my self,, even "all in one have told me that some 100 times,, ( 100 times?? guess how many hours i have WASTED on this totally useless message,,, maybe use little more time to take care about aftermarket than to tell me same useless b***sh*t again and again,,
    If this is some kind of HP strategy to earn money selling new products instead fore give possibility to buy such simple thing as new cartridges it would be nice if  Hewlett-Packard could put it some where in manuall/web ore EULA.. maybe  i need to find answer from EU consumer organisation ore can i have such luck to have an answer from Hewlett-Packard??
    looking forward to answer in very short time... today is::: 13-08-2014..
     kurt,  man in big dilemma,, shall i put Hewlett-Packard on f.x. telephone app named Buycott??
    ABOUT TAG:::
    COPIED FROM Hewlett-Packard website....
    The message tags contain in, which is not permitted in this community. Please remove this content before sending your post.
    is it me who is stupid ore do Hewlett-Packard use the word in and tell me IT IS NOT ALLOWED to write  in?????
    Advise:::: TAKE care of your costumers and waste less time on stupid auto generated messages

    The print cartrdiges should be widely available.  Did you buy from an authorized dealer?  What cartridge numbers are you looking for?  The Officejet 8600 uses 950/951 cartridges which are widely available.  
    Did your unit not come with setup cartridges?  
    The setup cartrdiges are required for initial setup of the printer and would be included in the package.  If the cartrdiges were not included then you are not receiving a new printer and/or are dealing with an unscrupulous dealer.  You will need to contact your dealer or HP for the proper cartrdiges.  Given the experience with your dealer I would recommend returning the unit for a refund and then buying from an authorized dealer.
    What country did you buy the printer in?  You can call HP support at the number listed in this document.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Hp officejet pro 8500 premier all-in-one printer

    The above printer is 1 1/2 years old and it has stopped printing.  When the printing became light, I installed new print cartridges less than a week ago.  Now, after five days, the printer is consistently cleaning the print heads and aligning the print heads and my documents are not being printed.  And, what is most frustrating, during all the cleaning and aligning, all of my new ink is gone and I'm receiving a message replace ink cartridges.
    Re: Problem with HP Officejet Pro 8500 printer: cleans printheads every time it's turned on
    Options 
    08-24-2011 06:34 PM
    Well,
    to this is say, "get used to it", or throw it away.  Many, Many, Many people have had trouble with this printer.
    The following are common and frustrating issues that this printer exhibits on a regular basis:
    1.  Constant Self-Checking (usually every 20-30 pages of print)
    2. Very persistant Printhead Cleaning/Checking, (Every startup and after about 20-30 pages printed).
    3. Worn-out printheads (usually within 1,100 to 1,500 pages printed).
    4. Paper mis-feeds. 
    5. Paper jams.
    6. Nearly impossible to use once the printer reports ink-depletion.
    7. Nearly impossible to use CIS Ink for larger print jobs.
    8. Ink and printheads "expire" regardless of when they are placed into service. (get a deal on ink or printheads last year?  Too bad, the warranty is already expired, most likely).
    In short, this printer is the most EXPENSIVE printer I've ever owned, and the most frustrating to use. 
    I have just over 2,000 pages of regular text printed matter with very little color, and have already gone through 4 sets of ink, and 2 sets of PrintHeads. 
    Although it's true that you can leave the unit on, and let it go into standby, you should NOT be punished with constant and time-consuming "self-checking" everytime it's turned on, or prints a handful of pages, BUT, it does NOT appear that HP will be standing behind this printer disaster.  AND, to make things worse, they've gone on to redesign it, giving it a different look, and so there are about 6 different models/versions of the OfficeJet Pro 8500.
    Anyone needing a reliable print/fax/scan/copy solution should look beyond this printer, because it will leave you wanting more, and spending more than you ever imagined you would have to on a late model printer.ro
    What is going on?  Why does it just automatically clean and align?  I also get alignment failed messages.  Any suggestiions?  

    rammerjammer,
    Thank you for bringing this to my attention, your feedback is very important and I want to do my best to help.  To answer what is going on, since the printing became light, started cleaning itself constantly, and fails the alignment, the printhead was damaged.  Click here to see and use the Limited Warranty for HP Ink Cartridges, Printheads, and Related Supplies.  There are many ways to contact HP.  The number to call is 1-800-474-6836 for HP and Compaq products for Home & Home Office use.  If you no longer have a warranty with the printer you can still use the warranty that comes with the printhead or ink cartridges.
    If you have a carepack with the printer that extended the one year warranty then the troubleshooting will be covered along with the printer if the printer needs replacing.  Check product warranty here, see HP Out of Warranty Support Options for Select HP Consumer Printers here.
    To order a new printhead you can go to HP Sure Supply and enter your printer or go to the HP Parts Store and order the printhead by part number C4900A for the Black and yellow and part number C4901A for the Cyan Magenta.  These printheads go by region also so be sure you are using the right region, these were found using the United States region. 
    The HP Officejet Pro 8500 Premier All-in-One printer has separated the ink cartridges from the printheads.  The ink cartridges are on the lower left and the removable print heads are on the carriage inside the printer.  The printer goes through a calibration process when turned on that will use ink.  Leave the printer on and let it go into stand by mode.  This type of printer is energy star efficient and made to calibrate on start up and be left on.  Allow the printer to clean or calibrate only if the printer must.  If it starts cleaning a lot it may be time to do a little maintenance to the printer (recommend once a month for maintenance).  Please see the following links for further details.
    Cleaning the Printhead Contacts
    Printer Paper Tears, Wrinkles, or is Damaged while Printing from the All-in-One
    Paper Path Issues in the Automatic Document Feeder
    Officejet Pro 8500 User Guide
    The printer has a duty cycle of 7.5k page/month.  The XL cartridges have a composite page yield of 1.4k pages with about a third of the black ink left over.  To me it would seem that the printhead should last somewhere in between.  This printer was designed to save money on ink compared to the rest of the officejets.  I hate that it has been causing so much trouble, hopefully the information I provided will help.
    HP Officejet Pro 8500 Premier (A909n) and 8500 Wireless (A909g) All-in-One Printers Product Specifications
    Click here for page yield information.
    Click the Kudos on the left side for helping and click Accept as Solution for providing a solution. I work for HP.
    Best Regards,
    Kenneth

  • OCR with HP Officejet Pro 8600 Plus e-All-in-One Printer - N911g

    Hello:  I have the "HP Officejet Pro 8600 Plus e-All-in-One Printer model N911g" and read in the manual that it comes with Optical Character Recognition (OCR) software.  I can't find any OCR software on the accompanying optial disk "HP Officejet pro 8600 series, Windows XP, VIsta, 7, 8 version 28.8".
    I'm using an HP Pavilion dv7 laptop running Windows 7 Home Premium ver 6.1.7601 Service Pack 1 build 7601.  
    I found an entry in All Programs called I.R.I.S. registration but can't figure out what to do with it.  Any help is appreciated.
    Thanks,
    John

    Hi,
    It's an option during the installtion process. Please try the following Utility:
       http://ftp.hp.com/pub/softlib/software12/COL29914/HU-135728-1/hpusetup.exe
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for