Hp Laserjet 100 color MFP M175nw does not appear as an AirPrint Printer. How do I make it detectable?, Hp Laserjet 100 color MFP M175nw does not appear as an AirPrint Printer. How do I make it detectable?

Hi all,
I have bought a new printer that was compatible with the AirPrint feature. But when I select print for a photo in the iPhone's photo album, the printer won't appear.
There is no clear litterature online that explains how to make the printer detectable. I suspect it should be done automatically.
However I keep on trying and the printer won't show up.
Would anyone would know how to fix this?
Thank you
Sanya

I just got this same printer.
You have to upgrade the firmware in order to use Airprint. Go to the HP support page for this printer and download the latest firmware update. Here's the direct link:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=kj-93591-3 &cc=us&dlc=en&lc=en&os=219&product=5076465&sw_lang=
Open the .dmg file and follow the directions. It's pretty easy.

Similar Messages

HP LaserJet Pro 100 color MFP M175nw does not connect to wireless network

I recently upgraded my wireless network router. I had my HP LaserJet Pro 100 color MFP M175nw connected to the old wireless network router. The SSID is password protected (WPA2)
I need to connect the printer to the new wireless network router. However, neither the control panel nor blue wireless connection button provide any way for me to do this. The manual has not walked through a way to do this.
There really needs to be a simple, no-nonsense way to just connect the printer to the wireless network. How do I connect this printer to a new wireless network?

Hi @shakayumi ,
I see that you are having issues configuring the printer on the new router. I would like to help.
Restore the printer's network defaults.
Touch the Setup button. (wrench)
Select Network Setup Menu.
Then select Restore Defaults.
Print out a configuration report to make sure the IP address is 0.0.0.0 and the SSID is cleared.
Printing a Configuration Report.
Here are the directions for setting up the printer through the Wireless Direct to configure the printer over the network as Infrastructure.
Turn the Wireless Direct on the printer.
On the printer touch the setup button, (wrench) then select network setup menu, select wireless menu, select wireless direct and turn it on.
On the computer, in the bottom right corner click on the wireless icon and select the printer from the list to connect to. Then open Internet Explorer and type in the IP address (192.168.223.1) for the printer in the address bar.
This will load the embedded web server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Click on the wireless icon and connect back to your network name.
Print out a configuration report to make sure the IP address is valid. (192... or 10....)
Now create a new port, this will save you the time, instead of uninstalling and reinstalling the software.
Go to Start, Devices and Printers, right click the printer, go to Printer Properties, select the Ports tab.
Click Add Port, select Standard TCP/IP Port, then select New Port and follow the wizard.
Type in the proper IP address for the printer.
Make sure the printer is online.
Test the printer.
If you are still having issues, then try this method:
If you have a Ethernet cable, connect it from the printer to the router.
Wait about a minute, print the configuration page to see if you get a IP address.
Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption. Apply settings.
Then disconnect the Ethernet cable.
Then wait a minute to see if you get a wireless light on the printer, print the configuration page and check the IP address again. Then type the IP address into Internet Explorer's address bar to bring up the printer's web page.
If the printer is back on the network, create a new port. Steps are listed above.
Make sure the printer is online.
Try and print now.
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If you need further assistance, just let me know.
Have a great day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Ipad(4th gen) does not connect to Laserjet 100 color MFP M175nw for AirPrinting

Hi,
I have a problem with Laserjet 100 color MFP M175nw and Airprinting.
Ipad(4th gen) cannot connect to printer for AirPrinting.
Wireless Direct is set on in the printer.
When I choose to connect to printers own wifi network with my Ipad, it can't connect.
(Ipad doesn't show the wifi symbol on top left corner.)
And if I try to print with Safari, it says "AirPrint-tulostimia ei löytynyt" which means in english "No Airprint-printers found".
I have all installations by the guide book several times, but seems that this Airprint simple doesn't work.
Device Configuration show this:
Installed Personalities and Options
PCL6           (20040201)
AirPrint
PCL              (20040201)
PDF              (20040201)
PS                 (20040201)
I wonder why AirPrint has empty value? (what ever this might mean)
Br,
Heikki

Hi,
Thank you for your reply and first action plan to find a quick fix.
Unfortunatelly even though I disabled IPv6, it didn't fix the problem. Also reboot and WIFI restart has been tryed sevelar times without any help. Ipad Safari is still giving me a message "no airprint printer found".
Same problem also when I try to print so that both Ipad and printer are connected to my home WLAN/DSL-router.
I don't see any problems for the printer to connect my home WLAN, both printer and Ipad has received an IP address from the WLAN router.
My router model is Zyxel AMG1202-T10B.
Ipad is updated to it's latest SW version which is 7.0.6. and printer's firmware date is 20131028.
I have no problems printing with my Windows 7 desktop computer which is connected to same network as well.
Windows 7 PC is connected to router via Ethernet. Printer is connected to router via Wireless, not ethernet.
Here is the network settings from HP Device Toolbox:
Network Summary
TCP/IP(v4)
Status (Wireless) Ready
IPv4 Address: 192.168.1.38
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
IP Configured By: DHCP DHCP/BOOTP Server: 192.168.1.1
DHCP Expiration Time: 02:23:54 (Days:Hours:Minutes)
WINS Server: 192.168.1.1
Preferred DNS Address: 192.168.1.1
Alternate DNS Address: 0.0.0.0
TCP/IP(v6)
Status: Disabled
Network Identification
Host Name: NPI08C7AB
Domain Name (IPv4/IPv6):
Domain Name (IPv6 only):
Bonjour Service Name: HP LaserJet 100 colorMFP M175nw (08C7AB)
Bonjour Domain Name: NPI08C7AB.local.
Bonjour Highest Priority Service: IPP Printing
Wired Network Configuration
Status: Not Connected
Hardware Address: 2c:44:fd:08:c7:ab
Link Speed and Duplex Negotiation: Automatic
Auto Crossover: Enabled
Wireless Network Configuration
Status: Connected Wireless: On
Network Name (SSID): Galactica
Communication Mode: Infrastructure
Authentication Type: wpa-psk Encryption: tkip+aes
Hardware Address: bc:85:56:ee:02:d3
Access Point Hardware Address: 28:28:5d:7c:23:a0
Channel: 10
Signal Strength: Excellent
Wireless Direct Setup
Status Enabled
Wireless Direct Printing Name (SSID) HP-Print-d3-LaserJet 100 Wireless
Direct Printing Channel 10
IP Address 192.168.223.1
SNMP
Status: Read-Write Access Enabled
SNMP Version: 1
Set Community Name: Not Specified (Defaults to 'public')
Get Community Name: Not Specified (Defaults to 'public')
Network Statistics
Total Packets Received: 428
Unicast Packets Received: 414
Bad Packets Received: 0
Framing Errors Received: 0
Total Packets Transmitted: 493
Unsendable Packets: 10
Transmit Collisions: 0
Transmit Late Collisions: 0
WS-Print Users: 0
Enabled Features
IPv4: Enabled
IPv6: Disabled
DHCPv6: Enabled
LPD Printing: Enabled
Bonjour: Enabled
SLP: Enabled
WS-Discovery: Enabled
SNMP: Enabled
Show IP Address: Enabled
LLMNR: Enabled
Security PJL Security: Disabled
Please let me know if you need any other additional information.
Br,
Heikki

HP Laserjet 100 color MFP M175nw does not connect to Virgin SuperHub

Spent the last day trying to connect my laptop wirelessly to a HP Laserjet 100 color printer.
I've uninstalled and tried to re-install the software, both from the disk supplied with the printer and from the less than useful HP support website.
The installation process gets to the point after 30 minutes or so, where it decides "An install operation took too long to execute. This is preventing product use" - so I cannot install the software. Despite during the process connecting the laptop via a USB cable.
This happens on two laptops (both HP one with Windows 7.1, the other with Windows 8.1, the result is the same in either case. This is extremely frustrating. So would appreciate a view as to how I might fix this.
The only thing that has changed is upgrade to a Virgin Superhub - but I do not see why this would cause the issue.

Welcome to the HP Forums DG-UK,
I see by your post that you are getting the error message of "An install operation took too long to execute. This is preventing product use" on Windows 7.1 and Windows 8.1. I can help you with this issue.
I am going to provide some steps so we can get the printer configured on the wireless network and then worry about the installation after that.
On the printer's control panel, touch the setup button, network setup menu, wireless direct, turn it on.
On the Windows 7 computer to play it safe, go to the wireless icon in the bottom right corner and select the printer's network name.
Open Internet Explorer and type in the IP address (192.168.223.1) for the printer in the address bar.
This will load the Embedded Web Server for the printer.
Select the networking tab, wireless on the left hand side.
Fill out all your network information, select infrastructure, select your network name, put in password and type of encryption.
Apply settings.
Now the printer should be configured over the wireless network.
Then go to the wireless icon in the bottom right corner again and select your network name.
Run the uninstall from the CD software to remove any registry files.
Disconnect the USB cable if it is connected.
Go to start, computer, right click on the CD and left click open, double click on uninstall.
Then disable all the start up programs and temporarily turn off the Antivirus Software. How to use MSCONFIG .
Click on the start up tab and click disable all.
Then go to start, computer, right click the CD and left click open, right click install or setup and run as administrator.
Select the option for wireless connection.
Test the printer now.
Then you will need to go back in and enable the start up programs and turn the Antivirus Software back on again.
Please provide in detail the results if you are still having issues.
Have a nice day.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet 100 color mfp m175nw not working anymore – MAC OSX YOSEMITE

After installing the YOSEMITE update my hp laserjet 100 color mfp m175nw not printing anymore. Connection is USB. And OSX Drivers are all up-to-dae. Also i heared similar problems with other printers than HP.
Any help? Thanks alot.

Hi @Ankanb ,
I understand that you are having issues since the Apple Security Update was done on the computer, after uninstalling and reinstalling the software, you can't find the printer now. I would be happy to help you.
I have provided some steps to try, to see if we get the printer working again over the network.
Print a Configuration page to see if the printer still has a valid IPv4 address.
Printing a Configuration Report.
If you have a valid IPv4 address for the printer then try and access the Embedded Web Server for the printer.
Type the IP address into your web browser's address bar. (Safari)
Did it load the webpage?
Repair the Disk Permissions on the Mac:
Close all applications.
On the Apple menu bar, click Go, click Applications and then click Utilities.
Double-click Disk Utility.
Highlight your hard drive/partition on the left.
Click Verify and then Repair Disk Permissions.
Restart the computer..
Reset the Printing System:
Note: This will remove all printers in the print and Fax/Scan, any printer removed can be re-added later by clicking the plus (+) symbol.
Click the Apple icon and then click System Preferences.
Click Printers & Scanners.
Right-click (or Ctrl +click) in the left white side panel, then click Reset printing system.
Click OK to confirm the reset.
Type the correct Name and Password.
Click OK to reset the printing system.
Then click the + sign to add the driver, highlight the printer. (you might have to click the drop down to select the printer's name) Then click on the Add button.
If you are having network issues, then add the printer through the IP Protocol.
After clicking the + button, select the IP icon across the top, type in the printer's IP address, select jet direct below and then Apply. (you won't be able to scan but you will be able to print, this way we will know if it is a Multicasting issue, if the Mac sees the printer)
If the Multicasting is turned off on the router, you won't be able to add the printer as a bonjour device.
Test the printer.
How is the printer connected? (Ethernet/Wireless)
If there is anything else I can help you with, just let me know.
Have a nice weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet 100 color mfp m175 does not print from network nor via usb cable

My hp laserjet 100 color mfp m175 just stopped printing last week. I have tried everything recommended but nothing works. I have re-install it both on wireless network and usb connection = nothing works. It prints all internal reports but nothing from any computer. I have 3 computers which I have tried to print from. It even does not print the test page. Please dont recommend to update drivers etc. as I have spend 2 whole days on this and nothing works!

Hi @einar1854,
I see by your post that you are unable to print by a USB or Wireless connection on 3 different computers, but the printer will print the hardware self tests. I can help you with this.
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. Find and fix common printer problems using HP diagnostic tools for Windows?
For the USB connection, follow these steps if the there are no errors from the Print and Scan Doctor.
(once we get the printer printing this way, we can setup the wireless)
Here are steps to remove the jobs from the spool folder and restart the print spooler.
How to Clear Current Print Queue In Windows Vista & Windows 7.
Follow the steps in this document to get to the device manager to check for the printer entries.
How do I get into Windows Device Manager?
Then click on Identifying problems in Windows Device Manager.
In the list click on Universal Serial Bus controllers and look for USB mass storage device and USB printing support, (make sure any other printers are turned off or disconnected)
Let me know what it showed in the device manager.
Check to make sure the proper port is selected.
Go to start, Devices and Printers, right click the printer and left click Printer Properties, select the Ports tab.
Make sure the USB has a check mark beside it, if not put the check mark there and apply the changes.
Check the print Queue.
In the Devices and Printers folder.
Right-click the name of the product and then click See what's printing .
Click the Printer button, then click Cancel All Documents if there are any documents in the queue.
Click Yes to confirm the action.
If documents remain in the print queue, restart the computer.
Try printing again.
What operating system are you using on the 3 computers? How to Find the Windows Edition and Version on Your Computer.
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
Print a configuration page to see also if the printer has a valid IPV4 address, so we have that information for when we setup the wireless. Printing a Configuration Report.
Provide the first 3 sets of numbers in the IPV4 address.
Please provide in detail the results if you are still having issues.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

LaserJet 100 color MFP M175nw - how do I install a different driver on the server to which I RDP?

I have installed my LaserJet 100 color MFP M175nw on my (32-bit) Windows XP Pro SP3 PC via USB and it works fine. When I make it the default printer (I also have another HP printer installed locally) and use Windows Remote Desktop (RDP) to my server - which is (64-bit) Windows Enterprise without Hyper-V SP2 (2008 R2) it prints but some fonts show gobbledygook. The printer driver on the server is defaulting to "terminal services easy print". I have administrator privileges on the server and have, in the past, been able to download the appropriate driver to the server so that printing in the RDP session works. But now I only seem to be able to find installation software to download (not the actual drivers). So, when attempting to install the software (rather than copy it) on the server the installation waits for the local (USB) connection and won't proceed.
What is the best practices way to have the locally installed (fully functional) machine be able to print from an RDP session? I'm sure I shouldn't have to drag each new local printer to the server and install it locally with a USB cable.

Hi there IT _Mgr
Quick suggestion; This is a commercial product. I will suggest seraching for posible solutions and posting in the forum for HP Business Support for yet a better chance at finding a prompt solution.
You may find the commercial Laserjet board here.
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Hope you find the help you need there;
RobertoR
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

LASERJET PRO 100 COLOR MFP M175 - does not work

If I press the power button for turning on , then both of LEDs "ready" and "attention" light , and display lights too. But the unit does not work.

Hello OlegRu,
Welcome to the HP Forums.
I see that you are having an issue with lights flashing on the printer.
Are you getting any kind of an error message on the display screen?
Please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Write me back when you have time with any additional information you can provide.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

How can i get to the wireless menu laserjet 100 color mfp m175nw?

Hello there!
Can someone please help me here. I'm trying to set up my wireless laserjet and i can not get it to work for the life of me.
Somehow the printer menu does not let me get to it or change any value in it, leaving me not able to connect to my wireless network. I have done anything and everything the HP support website saays to do. How can i change the SSID in the printer to what my network ssid is?
Thanks a million in advance!

Sorry that you are having this issue. Here is a link that may assist you with the problem.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02677483&tmp_task=useCategory&cc=us&dlc=en&lc=e...
In your printer settings, do you have WIRELESS SETUP or WIRELESS SETUP WIZARD?
The SSID is the name of your network. When the printer searches for a network, it finds your SSID, and you choose it.
**Click the KUDOS star on the left to say 'Thanks'**
Please mark a reply "ACCEPTED AS SOLUTION" if it solved your problem, so others can find it.

How di i reset the wi fi user and password on my HP Laserjet 100 Color MFP M175nw?

I bought this printer in Chicago and set it up on my son-in-law's wi fi system. Now I want it on my home system. How do I change it?

Hipotarti, Hope you re doing well and welcome to the HP forums;
This article should help you to establish the best approach for your wireless installation.
Select your operating system and follow the instructions GO HERE
Let me know the outcome and I will do my best to help help you if you need further assistance.
Hope this helps:
RobertoR
And remember . . .
You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

How to scan using the Laserjet 100 color MFP m175nw printer

Hello,
My printer stopped printing suddenly so I downloaded the ePrint and it worked. . . but now I cant scan ! I dont have the option to scan.
Please help!

Hello,
Please run toHPPSdr firstly and follow the step if its show.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Im-141416-1&cc=us&dlc=en&lc=en...
If its not work may be we have to change the file name Twain_32 which located in C:\Windows
Please try and let me know if it is work or not .

How to solve "acrobat could not communicate to this device" when scanning with HP LaserJet 100 color MFP M175 PCL6 connected via usb

I have de- and installed everything again. All other programs like Photoshop, native HP scanning software do work normally. Only Acrobat can't connect to the device.
What should I do?
Evgeny

I have restarted everything number of times already. Note my question category: "Categories: Windows". Acrobat version:
My actions and errors I see:
System report and installed plugins just in case:
Account Detail:
   User Rights: Admin
   User Account Control: Limited
   Process Integrity: Undefined
   Profile Type: None
Acrobat Detail:
   Sandboxing: Off
   Captive Reader: No
   Multi-Reader on Desktop Support: Off
Applications Installed:
   Office Version: Office 2013 32-bit
Available Physical Memory: 4194303 KB
Available Virtual Memory: 3975744 KB
BIOS Version: ALASKA - 1072009
Default Browser: C:\Program Files\Internet Explorer\iexplore.exe
    Version: 11.00.9600.16428 (winblue_gdr.131013-1700)
    Creation Date: 2015/03/11
    Creation Time: 08:51:26
Default Mail: Microsoft Outlook
    mapi32.dll
    Version: 1.0.2536.0 (win7_rtm.090713-1255)
    Creation Date: 2012/07/02
    Creation Time: 15:42:07
Display Detail:
   Screen Width: 1920
   Screen Height: 1200
   Number of Monitors: 2
   Number of Mouse Buttons: 16
   Has Mouse Wheel: Yes
   Has Pen Windows: No
   Double Byte Character Set: No
   Has Input Method Editor: Yes
   Inside Screen Reader: No
Graphics Card: Intel(R) HD Graphics 3000
    Version: 9.17.10.3347
    Check: Not Supported
Installed Acrobat: C:\Program Files (x86)\Adobe\Acrobat DC\Acrobat\Acrobat.exe
    Version: 15.7.20033.133275
    Creation Date: 2015/03/17
    Creation Time: 01:34:14
Installed Acrobat: C:\Program Files (x86)\Adobe\Reader 11.0\Reader\AcroRd32.exe
    Version: 11.0.10.32
    Creation Date: 2014/12/03
    Creation Time: 08:31:20
Locale: English (United Kingdom)
Monitor:
    Name: Intel(R) HD Graphics 3000
    Resolution: 1920 x 1200 x 59
    Bits per pixel: 32
OS Manufacturer: Microsoft Corporation
OS Name: Microsoft Windows 7
OS Version: 6.1.7601 Service Pack 1
Page File Space: 4194303 KB
Processor: Intel64 Family 6 Model 42 Stepping 7 GenuineIntel ~3605 Mhz
Session Detail:
   Boot Type: Normal
   Is Shutting Down: No
   Network: Available
   Inside Citrix: No
   Inside VMWare: No
   Remote Session: No
   Remote Control: No
   Using JAWS: No
   Using Windows-Eyes: No
   Using NVDA: No
System Name: MONSTER
Temporary Directory: C:\Users\edrokov\AppData\Local\Temp\
Time Zone: W. Europe Standard Time
Total Physical Memory: 4194303 KB
Total Virtual Memory: 4194176 KB
User Name: edrokov
Windows Detail:
   Tablet PC: Yes
   Starter Edition: No
   Media Center Edition: Yes
   Slow Machine: No
Windows Directory: C:\Windows
Installed plugins:
C:\Program Files (x86)\Adobe\Acrobat DC\Acrobat\plug_ins\Accessibility.api
    Version: 15.7.20033.133275
    Creation Date: 2015/03/17
    Creation Time: 01:34:20
C:\Program Files (x86)\Adobe\Acrobat DC\Acrobat\plug_ins\Annots.api
    Version: 15.7.20033.133275
    Creation Date: 2015/03/17
    Creation Time: 01:34:20
C:\Program Files (x86)\Adobe\Acrobat DC\Acrobat\plug_ins\IA32.api
    Version: 15.7.20033.133275
    Creation Date: 2015/03/17
    Creation Time: 01:34:20

HP Laserjet 100 Color mfp M175nw: How do I connect it to secure network router?

How do you set up the printer to connect to the network through a password protected router? Where would you input the passcode?
This question was solved.
View Solution.

On page 43 of the Software Technical Reference, it shows how to set up the wireless through the Embedded Web Server.
This link also have other reference documents (User guide, Software Technical Reference, Quick Reference Guide, and Installation Guide) that might be of help in the future.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution

LaserJet 100 Color MFP M175nw with Windows 8.1

I have a LaserJet 100 MFP M175nw and I am currently using it with a PC that has Windows 8.1. Recently upgraded to 8.1. I bought the PC with Windows 8 and the scanner/printer worked great with that OS. So I have been having issues with the printing/scanner ever since the upgrade.
I have it set up to print and scan wirelessly. It would work intermittently and when it didn't, I would remove the drivers and re-install them. Now that no longer works. I can't even get it to work using a USB cable. I downloaded the latest version of the drivers both the full featured and the basic versions, tried them both to no avail. It goes through the install then it gets to 99% and takes a long time then I get a message with a red X that states,"Error," And the error message that goes along with it is that it timed out. Same with both USB or wireless installs. I read through some of the difficulties others' have been having and the last I saw was to uninstall and then re-install the driver. That has not worked for me. I also downloaded the Print and Scan doctor but no device was listed which does make sense since I have not been able to get through an installation.
I ran and printed wireless network test report on the printer and it mentioned that the printer couldn't find my wireless router. But I have internet access with all other computers in the house with no issues. I don't know how to tell my printer what SSID to search for and the password for my network. The install files included a utility to do that but did not help.
I am stuck and would welcome any suggestion(s).
Thank you,
Frank

Hi @jacobumoru,
I see that you are getting a "fatal error" during the installation. I will certainly do my best to help you.
I have provided some steps that should allow you to continue the installation without the error again.
Run the installation, immediately after connecting the USB cable, follow the steps in this document to update the drivers so it doesn't error out again. A Fatal Error Displays During Software Installation. Then the installation should continue. Temporarily turn off any Antivirus Software, just to make sure it doesn't interfere with the install.
I have provided a document for Windows 8, for How do I get into Windows Device Manager?
If you need further assistance, just let me know.
Have a great weekend!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Hp laserjet pro 100 color mfp m175nw auto power

does anyone know how to set up the hp laserjet pro 100 color mfp m175nw so that it will turn on after a power failure

Hi,
I afraid it is not possible.
After a power failure you will have to manually turn on the device again.
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hp Laserjet 100 color MFP M175nw does not appear as an AirPrint Printer. How do I make it detectable?, Hp Laserjet 100 color MFP M175nw does not appear as an AirPrint Printer. How do I make it detectable?

Similar Messages

Maybe you are looking for