E3200 - USB port does NOT work for more than one device
We needed a new router that had the dual band connectivity as our previous router stopped working properly when we started using a baby monitor operating on the same 2.4 GHz. The choice was between E3200 and E2500. We chose the E3200 mainly because it also offered a USB port. We were hoping to use that to connect our printer and two external drives (thus bypassing our old desktop that's been working as a server). However, it turns out that the USB port on E3200 does NOT support USB hubs! So, you can ONLY use ONE device - either a printer or one external storage drive. That wasn't really clear at all from the description. I feel like we wasted the extra $50 hoping to get functionality that just isn't there. Can't believe that in this day and age, Cisco thinks we all have only ONE USB device we might want to connect to the network! The router itself is fast enough, but the extra $50 for a USB port that doesn't do much and some speedboost phantom ability is just not worth it.
Just to save time to you all, after numerous attempts to install a USB hub to my E3200,
I wrote to Cisco Customer Service (live chat) and I specifically requested how to set up the usb hub or the virtual USB port and they said that they do not have a software to install a USB hub.
Hope this help
Massimo
(Mod note: Edited for guideline compliance.)
Similar Messages
-
CustomDatumExample.java does not work for more than 2 attributes
The CustomDatumExample.java only works
if the Employee object has 2 attributes -
(EmpName and EmpNo). If I try to add
another attribute to the Employee object I get java.lang.ArrayIndexOutOfBoundsException: 2 on the getAttr3 method.
Anyone know why?
Employee object
CREATE TYPE employee AS OBJECT
empname VARCHAR2(50),
empno INTEGER,
attr3 VARCHAR2(50)
Custom object class
public class Employee implements CustomDatum, CustomDatumFactory
public static final String SQLNAME = "EMPLOYEE";
public static final int SQLTYPECODE = OracleTypes.STRUCT;
MutableStruct _struct;
static int[] _sqlType =
12, 4
static CustomDatumFactory[] _factory = new CustomDatumFactory[3];
static final Employee _EmployeeFactory = new Employee();
public static CustomDatumFactory getFactory()
return _EmployeeFactory;
/* constructor */
public Employee()
struct = new MutableStruct(new Object[3], sqlType, _factory);
/* CustomDatum interface */
public Datum toDatum(OracleConnection c) throws SQLException
return struct.toDatum(c, SQL_NAME);
/* CustomDatumFactory interface */
public CustomDatum create(Datum d, int sqlType) throws SQLException
if (d == null) return null;
Employee o = new Employee();
o._struct = new MutableStruct((STRUCT) d, sqlType, factory);
return o;
/* accessor methods */
public String getEmpname() throws SQLException
{ return (String) _struct.getAttribute(0); }
public void setEmpname(String empname) throws SQLException
{ _struct.setAttribute(0, empname); }
public Integer getEmpno() throws SQLException
{ return (Integer) _struct.getAttribute(1); }
public void setEmpno(Integer empno) throws SQLException
{ _struct.setAttribute(1, empno); }
public String getAttr3() throws SQLException
{ return (String) _struct.getAttribute(2); }
public void setAttr3(String attr3) throws SQLException
{ _struct.setAttribute(2, attr3); }
nullJust to save time to you all, after numerous attempts to install a USB hub to my E3200,
I wrote to Cisco Customer Service (live chat) and I specifically requested how to set up the usb hub or the virtual USB port and they said that they do not have a software to install a USB hub.
Hope this help
Massimo
(Mod note: Edited for guideline compliance.) -
Networked L7680 does not work from more than one computer at a time.
Have installed latest driver software on both computers. Printer will only work with one computer on at a time. When I run windows device trouble shooter from the last computer turned on it says printer is off. It works ok from the first computer turned on.
Any help is appreciated.Networked how?? Please explain how everything is connected and model number of equipment.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired! -
Tcode MASS does not work if more than one item in contract
Hi,
I need to update the contract zone of a PO. Via tcode ME22N, this zone is disabled, so i cannot fill my contract in the PO using this tcode.
I tried tcode MASS which works only if the contract has only one item.
Can anyone help please?
Thanks in advanceHI Anu,
Good to KNow that you are able to do it by Mass
In Mass for Multiple Line Item to update to Multiple line item PO
Just go to MASS
Select the option BUS2012 (Purchase orders)
and in the select the poline item EKPO
And enter the PO Number along with the Item Number in the entry screen and execute it .
But for the Contract also enter the option
Outline Agreement -- for the contract number
Principal Agmt Item-- for the contract item number
Enter the above against the PO and its item number combination it works.
As suggested earlier please check the Screen layout option also.which would be more easy way,
Check the PO Screen layout-Field settings. at the Document type level mainatained in the config.
against the
Hope so this would help.
Regards
Anjanna -
Hi I have problems with not working USB ports. It used to work. I downloaded actual drivers at msi.com for my gaming notebook GX 60 Destroyer and now my USB ports does not work. What should I do?
What driver have you updated?
Try to do an EC firmware reset by removing the battery and the AC adapter then put the battery back with AC adapter attached.
Same questions like Pegasus asked, does all ports not working? which one exactly? What OS are you using?
Have you done any changes to the system? (for example: self-install OS or changing OS) -
LSMW For Converting Open Sales Orders (not working for more than 1 item)
Hi,
I am using following standard object for Open sales orders .
Object 0090 Sales documents
Method 0000
Program Name RVINVB10
Program Type D Direct Input
Its not working for more than 1 line item.
For more than 1 line item its giving Error saying that
'102122 V1 845
Print parameter SAPML2 1 is not defined
Can anybody help me out in this regard.
Thanks in advance.
Nitin.hello, friend.
i will still research the subject. but the first thing that comes into my mind is t-code VA05. with this, you have the option to change the Plant en masse. so a possible workaround is for you to list a number of sales orders using VA05. you then sort the line items by Plant. choose all items with the same plant, change the plant via mass change... then change back to the original plant. hopefully, the new settings should apply.
do test a few sales orders by doing this for a larger scope.
regards. -
One USB port does not work with external Disk or USB key
Hello,
Back to my iMAC there is 3 USB port. The second one - in the middle - does not work pluging an external Disk, an USB key or an iPOD nano. However it works well connecting a Wacom tablet.
Is there an explanation to this behaviour ?
More the keyboard is plugded on USB port 1 and the mouse on the keyboard. Time to time - especially at reboot - I have to unplugged the mouse and plugged again it in order it works.
In advance thank you for your answers
RegardsSince it does not work for three different devices, I will assume it is not something simple like a faulty USB cable. Since it does work for one device, I will also assume that the port is (at least partially) working.
As a test to narrow down the cause, I would try restarting from your Mac OS X installation disc (insert disc and restart with the C key held down).
At the first Installer screen (after language selection), go up the menu bar. Under Utilities, select to run Disk Utility. Now, connect the USB drive into that center port. Does it appear in the Disk Utility sidebar?
Please post back the result... -
My usb port does not work on all user accounts
My usb port does not power my iPhone or Apple keyboard on my main account, but if I switch users it begins to work
Spring 2011 macbook air with the latest OSX as of Jan 2012.
Thoughts
THANKS
StanTry Resetting the System Management Controller (SMC)
-
Do you get extra storage for more than one device
Do you get extra iCloud storage for more than one device
No. The free storage is currently per Apple ID rather than per device.
-
Hello all,
I am writing to you hoping that one of you may have an idea what's wrong with my beloved w510.
A few hours ago the usb port (on the back on the right side) where I plugged in my external mouse stopped working.
In the Lenovo part list it is referred to as "usb Sub card yellow".
It just does not recognize a mouse nor any usb stick or external drive. I have already reinstalled the usb controller
but it didn't make any difference. (I think the driver is only for the usb 3 hub on the left side of the notebook)
when I plug in the external drive the lights of the drive start "flashing" same for the usb stick, but they are not recognized as drives..Same for the mouse. The lights go on, but nothing else works.
Probably its all my fault, but I don't know what else I can try! Please excuse my bad English...!
Hoping that somebody might be able to help me...
PaulI have a reproducible test for this issue on my W510.
1) Plug in a usb mouse into the rear usb port and ensure the mouse is working.
2) Hybernate the system.
3) Resume the system.
4) Confirmed the mouse does not work.
5) Disconnect and attach the mouse to one of the left usb ports and confirm the mouse works.
6) Disconnect and attach to the rear usb port and confirm the mouse does NOT work.
7) Restart the system and confirm the mouse still does NOT work.
8) Shut down the computer (a full shutdown, not standby or hybernate).
9) Power the system back on.
10) Confirm the mouse is now working in the rear port.
I can do these steps over and over with the same results regardless of whether the AC adapter is plugged in or not. It appears that the data connection does not work after the system is resumed from a sleeping state. I have the latest UltraNav driver and utility and the latest power management updates.
Oh, and one more test. Hybernate the system with nothing plugged in, then plug in a mouse into the rear usb port when the system is presently hybernated and then power the system back on. The mouse will not work and rebooting doesn't correct it. Only a full shutdown fixes it. -
I noticed that one USB port(All other ports appear to be working)in the back of my Mac Pro does not work.
Aside from taking my Mac Pro in for a repair, is there any other way to fix this problem?You can always try resetting PRAM and NVRAM…
http://docs.info.apple.com/article.html?artnum=2238
… and/or the System Management Controller…
http://docs.info.apple.com/article.html?artnum=304123
… otherwise no. You will need to take it in for repair and most likely a logic board replacement. -
USB port does not work with a screen
Dear All,
My manager has a MacNook Air 10.8 and he is using a large 27'' Apple screen.
He connects the screen to the MacBook Air with a cable which has 3 connections (USB, power, Tundetoh)
He reported to me, that some time, he connect a mouse or a keabord to the USB, at the back of the screen, the two devise does not work, while it works when the devise are connected to USB port of the MacBook Air.
His Macbook Air software are uptodate.
Does you know how to make working the USB devise connect to the screen?
And what does make those trouble?
Cheers
PierreIs there special softwer for thunderbolt to update or install?
-
Apex 4.0 tree does not work with more than 2 levels.
When I have more than 2 levels in my tree, I only see the root node. The query works fine and returns 132 rows when I run it in SQL. It is just the tree that does not work.
The same tree when built in 3.2 works fine.
This is my tree query:
select case when connect_by_isleaf = 1 then 0
when level = 1 then 1
else -1
end as status,
level,
"NAME" as title,
null as icon,
"ID" as value,
null as tooltip,
null as link
from (
SELECT '__TOP_NODE__' id
, NULL pid
, 'BI Applications' name
, '' link_id
, null a1
, null a2
FROM dual
1 b) BIA Modules
UNION ALL
SELECT '__MD_'||module_key id
, '__TOP_NODE__' pid
, module_name name
, module_key link_id
, '__MD__' a1
, null a2
FROM c_bia_module
Level = 2
Parent = Module
Node = Functional Areas
ID = '__FA_' prefixing functional area code
UNION ALL
SELECT '__FA_'||funcarea_key id
, '__MD_'||module_key pid
, funcarea_name name
, funcarea_key link_id
, '__FA__' a1
, null a2
FROM c_functional_area
Level = 3
Parent = Functional Area
Node = Fact Group
ID = '__FG_' prefixing fact group key
UNION ALL
SELECT '__FG_'||factgroup_key id
, '__FA_'||funcarea_key pid
, factgroup_name name
, factgroup_key link_id
, '__FG__' a1
, null a2
FROM c_fact_group
start with "PID" is null
connect by prior "ID" = "PID"
order siblings by "NAME"
If I reduce the query to just use two levels like:
SELECT '__TOP_NODE__' id
, NULL pid
, 'BI Applications' name
, '' link_id
, null a1
, null a2
FROM dual
1 b) BIA Modules
UNION ALL
SELECT '__MD_'||module_key id
, '__TOP_NODE__' pid
, module_name name
, module_key link_id
, '__MD__' a1
, null a2
FROM c_bia_module
It works fine. Can somebody let me know what I am doing wrong? Is there a way to set the number of levels supported in 4.0?Hi Vidya,
Thanks for posting your example. You may want to remove your workspace details from the previous posting, or at least update the password on the workspace. I've taken a look at your example and initially couldn't see anything wrong with your tree query. However, when I ran your query in SQL Workshop, it only returned one row, which would explain why you were only seeing one node in your tree! I've updated your query to use a WITH clause, and the tree is now working correctly. I believe you've hit an underlying database bug where the CONNECT BY query is only returning 1 row, when in fact it should return > 1 row. By re-writing the query to use a WITH clause, you can get around the problem.
Regards,
Hilary -
PSE8 Backup/Synchronization not working for more than a month
1. Reconnecting files shows that a file is not connected; however, no file is listed. How do I find missing file's properties.
2. Backup/synchronization preferences works fine.
3. I can select one or more or the whole catalog.
4. The twirly icons show next to the album(s) for a second or show but then the synced icon remains in album/albums.
5. I click OK and after the hour glass shows a while, it finishes.
6. I click on icon and see that sychronization is on.
7. If I check (unsynced items, synced items, or items marked for sync) it shows nothing and says that none of those choices matches.
8. I have repaired and reindexed countless times (never has there been a "repair" problem.
9. I click on optimize and that works.
10. After that I notice "generating thumb nails" and the twirly thing moving. I've let it generate thumbnails for more than 24 hours and it's still going.
I have spent countles hours during day and night, and I can't get it to work.
I noticed that someone wrote that he had a similar problem that began with his using the IPAD. And I started using the IPAD also, but I couldn't sync my files with photoshop.com before that.
Customer service and Help provides me with no answers. What should I do?Hi clairenanak:
Sorry to hear about the troubles.
On your #1, you may have disconnected files of media types that are not visible. To ensure that all media types are visible, go to View > Media Types, and check any items that are not currently checked. Then try the Reconnect.
As far as backup/sync not working, disconnected files can stop sync from working.
After resolving the disconnected files issue, let us know if sync is not working. We may need to look at the sync log to determine why.
As for the Organizer constantly generating thumbnails, this could indicated that you have many files, for example 10,000, in your catalog.
If you have many files in your catalog, then you may need to just wait for the process to finish.
It may also indicate a problem with the thumbnail cache that can't be repaired by the Optimize command.
You can manually reset this file by doing the following:
Determine the name of your Elements Organizer catalog.
The name of the catalog appears in the lower-left of the Organizer.
Alternatively, you can open the Organizer and then click File > Catalog. The name of the catalog will show in the list at the bottom with " [current]" after it.
Close the Elements Organizer.
Navigate in Windows Explorer to the folder that contains your catalog. Here are the default locations:
Windows 7 or Vista: C:\ProgramData\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>
Click Start, type "%ProgramData%" (including the quotation marks) into the Start Search, and then press Enter.
Open each folder in the above structure until you have opened the catalog folder.
Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>
Choose Start > Run, type "%AllUsersProfile%\Application Data" (including the quotation marks) in the Open text box, then press Enter or click OK.
Open each folder in the above structure until you have opened the catalog folder.
NOTE: Replace <CATALOG NAME> with the name of the catalog that you determined in Step 1 above.
There should be a file called thumb.5.cache, which is the thumbnail cache. Delete this file.
The next time you open the Elements Organizer, the thumbnail cache will begin to rebuild. This may take some time, depending on the number of files you have in the catalog.
HTH -
one of my usb ports is fine the other will charge but not transfer any data.
Thank you for your prompt reply. My Macbook is, unfortunately, older than one year and I have not AppleCare. I have been into the Apple store, they suggest me to buy an other laptop. Probably because the repair is more expensive than a new Macbook.
Anyway I have not intention to chane the computer because is less than 3 yrs old, and it wors very well except usb.
thank you again
Maybe you are looking for
-
In OBIEE 11G, how to get the special parameter created by JAVA?
Hi Experts, In OBIEE 11G, how to get the special parameter created by JAVA? For example: In JAVA , it has set one parameter named 'test'. So how to get the parameter in filter area in OBIEE?
-
Connecting to a Remote JMS provider from MDB in jboss-4.0
Hi, I am using Tibco as a remote JMS Provider. When the Tibco server is running on the same machine as JBoss-4.0, the Message Driven Bean deployed in Jboss is able to get the messages from the queue on Tibco server. I have added the following configu
-
both the apple tv and macbook pro are on the same network
-
Connect to printer via Express via Extreme
I have a Canon printer connected via USB to my Extreme base station which is connected to my DSL modem. It prints fine. I run an internet connection off of the ethernet port and send it to an Express base station to my shop. My question is this - Is
-
I have an eMac 1.25 Ghz that suddenly crashed and won't boot up. I am pretty sure it sounds like a dead hard drive because I hear clicking noise as it tries to access it to boot up. All I get when I try to start is a grey screen and eventually a flas