Hp office jet 6500e709n running on windows 7 64 bit goes off line every few days.

This printer worked fine on my wireless network when I was using Windows XP. Now that I am using Windows 7 64 bit everytime I turn off the computer it goes off line. I have to reconfigure it which knocks me off of my wireless network and I have to turn my router off and on to reconnect and sometimes the printer is back online and sometimes not.
Any suggestions would be apprecciated.

Have you tried the Updates on this page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3795...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

I need to share a file with sec.(windows based). She uses it all the time. I need to just download updated version every few days. I have an old airport extreme and was hoping to attach an external drive. Will this work?

I need to download an updated version of a file every few days to use. My secretary works on the file all the time. I thought i could use my old airport extreme and attach an external HD and set up a network to do just this. At work we alll use pc's. How can i make this work? At the moment we use usb stick to transfer which is getting to be a bit of a pain as the file grows every week. Presently 5GB.

I thought i could use my old airport extreme and attach an external HD and set up a network to do just this.
Yes, you can use either the 802.11g or 802.11n AirPort Extreme Base Station (AEBS) to attach an external USB HDD for file sharing. Either AEBS model would allow you to share out this HDD to either Macs or PCs. From the PC, the shared HDD would appear as a network drive which you can map via Windows Explorer.

B110 wireless printer - keeps going off line in windows 8

Hi - Since supgrading to windows 8 I've had probelms with my wireless printer (B110) and the fact that it keeps going off line. I've now ried removing and re installing usng latest drivers. During installation I get the message that printer rediscovery problems detected. You Pc may not be able to track on line status changes of your printer. If you are using firewall software verify that UDP port 427 is unblocked from your printer at 192.168.2.4 to your pc.
Following windows 8 help I've gone to firewall inbound rules and triesd to enable udp port 427, without much success. On the new inbound rule wizard , I choose the port option then the udp option and then the specific port option and enter 427 . This eems to having no impact but if I'm being honest I've not much of a clue on what I'm doing.
any help much appreciated

While I am researching your Belkin router, I would like to add that you will want to set a static IP for your printer. The green checkmark in your Printer's folder just means it is your default printer and has nothing to do with whether or not it has an IP address. You have to go into your Wireless Menu on the front of the printer to "View Wireless Settings" or print a network configuration page at that exact moment it is not communicating. You are not looking for "No trouble found." Sorry I wasn't more specific but you are looking for an IP address or URL like 192.168.1.5 or 10.0.0.5 etc.
Was the above document I provided any assistance? That has very good information to help clarify the instructions I am giving up because I really want to help you but I will need a bit more information.
Here is a link to really good instructions on how to set a static IP which I think will completely resolve this problem for you.
--How to Set a Static IP in a Photosmart Printer--
Let me know if this helps.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Office Jet pro 8610 for windows server 2008 R2

I have the new Office Jet pro 8610 prither but dosn't have the driver for "Windows Server 2008 R2 Enterprise" 64 Bit.
What to do now. Can you please provide ?
Thanks in advance.
This question was solved.
View Solution.

Hi,
The same driver as provided for any Windows OS as Windows 7 or 8 should be used, the installation however should be launch via the command line and not as a standard installation.
Follow these steps to install the printer software on a server:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8610-e-All-in-One-Printer/5367603/model/5367606...
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP Solution Center for Office Jet Pro K5400 on Windows 7 Home Premium 64

When I was running Windows XP I had HP Solution Center that would allow me to view approximate ink usage and balance of ink in cartridges. Is there an HP Solution Center I can run on Windows 7 that will allow me to view approximate ink usage or balance of ink in cartridges?
This question was solved.
View Solution.

Hi Rubber_Tree,
I see by your post that you would like to know if there is a HP Solution Software which you can run on Windows 7.
I can help you with this issue.
The Windows 7 drivers are preinstalled Windows drivers. Unfortunately there isn't a Full Software driver to download.
I have provided a download the for the HP Toolbox that will work with Windows 7, which provides status and maintenance information about the printer. HP Toolbox. You may check it out.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Windows Explorer was crashing/restarting every few seconds and after trying several different methods of fixes, the only one that worked was removing Firefox, is there something I've missed that I can get Firefox back?

I'm running a Toshiba Satellite laptop that was originally running Windows Vista 32-bit, but was upgraded by me to Windows 7 32-bit. On Windows Vista, all I would run was Firefox. I loved it!!! On Windows 7, I've noticed that Firefox kept hanging whenever I would try to download a file...from anywhere. I got so frustrated I went to try several different browsers. They all worked extremely quickly, whereas Firefox was working so slow, I could click on a link to a page, go get some lunch, come back and it still be trying to load the page. This was drastically unusual for Firefox. I used the other browsers and everything was fine for a week and then Windows Explorer started going down every few seconds. I went to the windows 7 forums and started looking. There were several suggestions on how to fix the problem, none of which worked for my compy. I tried restarting the compy in safe mode. That didn't help. I turned off every startup program except for the essentials and that DID work in keeping Windows Explorer from restarting. I then dove into the tedious task of trying to discern which 3rd party program was the offender. I removed everything from my compy that had been downloaded in the last ten days (well before the windows explorer issue, but not before the firefox issue). That didn't work either. I tried replacing an explorer file, which didn't work either. There were several other things I tried, as well, but nothing worked. Then, I saw a post that Firefox had caused the problem for one person. I went in and did as was suggested and completely removed Firefox and all associated files. Unfortunately, this worked. I haven't had any more trouble with windows explorer restarting. My big problem is, however, I can't run Firefox!!! And I LOVE Firefox!!! It's spoiled me! I hate Internet explorer, which is what I'm forced to run now. I've tried Safari and Google Chrome and don't like either one of those, either. I want my Firefox back! But if it's not working 100% it's less frustrating to be forced to live with the Internet Explorer. I'm going insane, here! Does anyone have any suggestions? I tried clearing out browser history, changing download files and a couple of other things and nothing worked with the Firefox to get it going better before I started having the Windows Explorer difficulty and had to completely erase the Firefox program. If I've missed any info, please don't hesitate to ask!! I'm happy to supply whatever I know about the issue!!

uninstalled firefox ....deleted all files still remaining under mozilla firefox directory in program files ... to avoid having to reprogram all my settings, reisntall all addons as well .. I did not remove anything from mozilla firefox that is stored in either appdata or under the windows users directory (if any)
... the as suggested reinstalled the latest version of the firefox browser using the link you provided in the email ..; tested and several issues still remain present and unresolved ....
so please this is urgent or I will have to jump browsers and start using chrome .. because we work 14 hours a day 6 (sometimes 7) days a week, to get ready for the launch of our newest venture and we cannot lose that much days on browser related issues ... so please instead of putting me through week long step process .. of do this .. do that .. can you please actually look into the issue from your end .. I use firefox for so many, many years thta I deserve this kind of support .. thnx Robert

I have a dj6480 connected to wan by a bridge, running win7; now getting notice off line. xp works

How do I get printers back of line? Using bridgewith WAN running Window 7 Pro. Worked until 7 days ago. Machine running Windows XP Pro do not have this problem

Hi,
I use a similar configuration at home and frequently find that my bridge loses/resets its connection to the WLAN which causes the printer to lose its IP address. Sometimes my computers were still able to find the printers, sometimes it couldn't.
You can check if this is your issue by going to the printer and checking its ip address (sorry, I'm not familiar with this printer so I can't give exact steps). If the IP address starts with 169.254, then that is likely what happened.
Rebooting the printer should restore a valid IP address but the issue may recur. In my case, I changed the printer to use a static (manual) IP address.
I suspect that the difference between XP and Vista/Win7 is that XP is locked onto the MAC address of the printer while Vista/Win7 try to use the IP address. This is settable and may help:
Open Devices and Printers
Right click on the printer and select 'Printer Properties' (not 'Properties')
Select the Ports tab
Select Properties button
Check 'Always print to this device, even if its IP address changes"
Tell us how this works out!
Andy
(HP Employee)

Your Apple TV is connected to your wi fi network but cannot connect to the internet. Airplay logo not available on ipad3, iPod touch3g and showing intermittently in iTunes on windows laptop. Switched ISP a few days ago. Entered pass key info on all.

I switched ISP a few days ago and had problems with airplay since. After restarting and reinstalling and updating, re entering pass keys for new wi fi on everything, Apple TV shows: Your Apple TV is connected to your wi fi network but cannot connect to the Internet. Ipad3 and iPod touch 3G have no airplay icon or get one briefly then it disappears again. Same with itunes on windows laptop.
Can anyone help?
Bob

Welcome to the Apple Community.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first. Networks that have inherent issues can be seen to work differently with different versions of the same software. You might also try moving the Apple TV away from other electrical equipment.

Pb G4 1.67Ghz running OS 10.4, right side of the screen 2, pixel wide vertical lines, a few days later colors posterized on pics and vid. Vertical lines don't show screen capture, but pics still posterized. Hardware test from disk shows ok.

Right side of screen started showing 2, pixel wide vertical lines. A few day later colors in pics and vid posterized. Vertical lines don't show in screen capture but pics still bad. Ran hardware test from disk, ok, adjusted color in sys prefs, new profiles a bit better but still bad, mpeg worse, jpeg bad. No better in new user account. Now a month later, right side has 8 vert lines and occasionally a slightly darker area in bottom corners for a few seconds. Reset pram, battery plugged into adaptor 99%. I can notice, for a slit second, when the screen saver is on, when I move cursor to get back to desktop, true color of image can be seen for a flash of a second.

sorry, was in a rush, any suggestions to fix or ideas of what has gone wrong

Making copies HP Office jet J6424 software for Windows 7

Can not find compatible software for Officejet J6424 All in One Printer and Windows 7 to allow copies.

Hi grandmere,
Welcome to the HP Support Forums! I see you are trying to make a copy on your HP Officejet J6424, but you are not able to make copies.
I see you are using the Windows 7 Operating system, which would have needed to be installed using the in OS driver, to get a better understanding take a look here: Installing the Printer Software in Windows 7 for a USB Cable Connection, with that being said the in-OS driver some of the buttons on the product do not function and some of the advanced product features are not available.
Make sure to check out the FAQ's at the bottom of the document to see what workarounds are being used.
You should be able to make a copy from the front panel of you printer: Changing the Copy Settings for the Current Copy Job
I hope this helps!
Thanks,
HevnLgh
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

Recurring Printing Problem with HP Office Jet Pro L7590 w/Windows XP operating system

This printer is a real workhorse but frequently, when printing large documents from the internet, the type changes from regular print to total giberish -something similar to a Russian Script. It does this midsteam into the document and there is no error message or any indicatin that something is wrong. It is also hit or miss-sometime I get the entire document in English and sometimes I don't. Unfortunately, I'm wasting a ton of paper and time to redo everything when it occurs.
Other than the above, it works fine. Any suggestions on how to correct?

So the printer will begin to print garbled text in the middle of large document print jobs, from time to time? Is this correct?
How is the L7590 connected to the WinXP PC? (USB, ethernet, wireless)
How long is the USB cable if connected this way?
How far away from the router is the printer if connected wirelessly?
If usb connected, how old is the USB cable?
It is possible that this problem is coming from a connection problem. If a minor connection issue exists, then it can leave portions of the print language being sent as commands to the printer out. This can change the printer's interpretation of the printer command language.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

HP office jet 6500 running out of space when printing

I cant get written articles to fit on the printer paper.. It cuts off some words on the end of the paper??

That is exactly how the list for system protection should look by default.
One thing has caught my attention and that is one particular folder on the E: drive: Ashlyn-HP. This looks like the same naming format used for the user profile directories. Somehow, a user profile has been assigned to drive E:. The problem with this is that user profiles grow in time as this is the default location for personal files for that user (downloads, photos, documents, music, etc.). A lot of people use the default location for simplicity and this causes their user profile folder to grow.
The E: is meant for HP diagnostic tools and is not designed to handle this kind of growth. I always recommend not using the E: (HP Tools) drive for any storage of any content for this reason. If you could, right-click the Ashlyn-HP folder and select properties. What is the size on disk?
Is Ashlyn-HP the main account used or is it a secondary or alternate account?
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Can Firefox open one page in same window?I could do that few days ago,and now all of a sudden it open new page in new tab or new window.What can I do?Thank you

Whenever I search something on Google and try to open it,it opens in a new tab or new window.I always could open it in the same tab. Can you help me?

Hi,
On the search results page, you can try changing the setting beside '''Results Window''' via the gear icon on the top right corner of the page. Please also see the '''Note''' on the bottom.

Why doesn't Firefox stop running when I shut it off? Every time I shut it off and return later, I get a message that Firefox is running, but not responding and that I have to restart my computer to access Firefox.

When I shut down Firefox I get all the shutdown messages, so I assume it has shut down as it should. But if I go back to my PC later (within an hour or so) and click on Firefox to bring it up, I get the "runningbutnotresponding" message and the promt to restart my PC.

See - [https://support.mozilla.com/en-US/kb/Firefox%20hangs#w_firefox-hangs-when-you-quit-it Firefox hangs when you close it]

Why do I have to turn off and on my HP office jet 7500A every time I want to print a page? I can print one and imediatly try to print a second and it says it cant be found on the network.

Since going up to Lion I am having problems with my HP Officejet 7500A printer. It is on the network wirrelessly. After every page I have to turn the printer off and back on again because my mac cant find the printer on the network. The windows mechines here can still find it, but not my Mac Pro. What is going on?
Obviously I have it set up right because I can print to it. problem is my mac thinks it goes off line every time I tell it to print another document.
Anyone know of a fix?
Thanks!

Lion may have replaced files that partially made up your printer drivers. Either way, HP saw fit to make a new set of drivers specifically for 10.7 so you may want to use it simply to avoid any bugs tehy found.
Get it here:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-98095-2 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
Hope I helped

Hp office jet 6500e709n running on windows 7 64 bit goes off line every few days.

Similar Messages

Maybe you are looking for