Hp officejet Pro 8600 Plus scanner document feeder making terrible noise

The top document feeder makes a terrible grinding noise as it feeds the paper for scanning. What should I do?

Hello @BarterG,
Welcome to the HP Support Forums!
I would like to assist you today with resolving the grinding noise you're hearing when your HP Officejet Pro 8600 Plus e-All-in-One Printer feeds paper through the automatic document feeder mechanism. This issue may be due to dirty rollers, debris in the feeder paper path, or a hardware defect with the document feeder mechanism. To resolve this issue can I please have you follow the steps below.
To start troubleshooting can I please have you click here. Once the support document opens please run through Solution one, Solution two, and Solution four. When you're cleaning the document feeder please keep an eye out for any paper or debris in the document feeder paper path that can cause paper feed and grinding noises.
Once your troubleshooting is complete, please test the document feeder again.
Please respond to this post with the result of your troubleshooting. Best of luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Similar Messages

Officejet Pro 8600 Plus scanner failure

I have an Officejet Pro 8600 Plus all-in-one. When I first got it, all of the features worked fine: print, scan, and copy. A few weeks ago, it started to not scan or copy, and printer was hit or miss. I have managed to resolve the printing issue, but it still wont scan or copy. I have tried uninstalling the printer both from the hp folder and control panel and then reinstalling the driver (I have the full feature one). I have tried the scan and print doctor, and it doesnt make it past the second step. The error message the printer displays is, "scanner failure: unable to scan, copy, or send a fax." I have also followed the steps to go into services, and both of the necessary dependencies are listed for the WIA, and the RPC and shell hardware are both started. Please help.

Hello ld2hx,
Welcome to the HP Forums.
I see that you are having an issue with scanning, copying and faxing.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please click on the following link for A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks for your time.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

HP Officejet Pro 8600 Plus Scanner Software

Hi,
I'm a big fan of HP products. My last several printers, scanners and computers have all been HP.
I recently purchased the HP Officejet Pro 8600 Plus to replace an older machine with similar capabilities (ADF, duplex printing, etc). The previous machine was also an HP printer.
The problem that I'm having is that the software seems to have been downgraded. The software on my previous machine had the ability to automatically parse pictures laid on the flatbed scanner into individual JPGs. With the software on this machine, it seems that I need to manually crop each image. The options for optimizing each image, by removing scratches, automatically adjusting color, sharpening, etc. are all gone.
I really miss these features. I did find that I had been using a 'Basic' version of the software. I installed the full version and found it slightly different, but it still lacks the automatic image selection and image tweaks that I made such heavy use of.
Is there any way to get these options back?
Thank you,
--MrXmas
This question was solved.
View Solution.

NeonSkeleton,
That is unfortunate. It's a **bleep** nice machine except that the software is really a step backwards.
Is there any way to use the older software from another HP device? The standard microsoft scanner drivers don't do anything towards my need. The network connection seems to be a stumbling block for most of what's out there. I'd be happy to hard-wire via USB if that could get me the software upgrade (the speed over USB is a considerable improvement as well).
If it isn't possible to use another HP driver, do you have any recommendations for 3rd party drivers?
Thanks for your help,
Jim

HP Officejet Pro 8600 Plus scanner has become cloudy

I used the scanner to scan hundreds of photos and it was working perfectly throughout.
A couple weeks later I try scan some more and all of a sudden the left edge of my scan is coming out all cloudy.
For example, see http://www.lovettsoftware.com/downloads/hp/cloudy.png
Is there a way to clean, or recalibrate or do anything to fix this or is the scanner toast ?

Thanks for the link to the user guide. I tried all the glass cleaning ideas, but I see no improvement in scan quality.
I switched to a Canon Pixma scanner and the cloud is gone, so I'll go with that for now.
For comparison:
The bad scan from HP Officejet Pro 8600 Plus: http://www.lovettsoftware.com/downloads/hp/scan4.png
The good scan from Canon Pixma: http://www.lovettsoftware.com/downloads/hp/scan8.png
Notice the gray fuzzy tint around the top left edges is gone in the Canon scan.
Feel free to pass this along to your engineers so they can work on designing a scanner that lasts better. I really didn't do that many scans, I did 565 scans, in fact. I would expect the scanner to last a lot longer than that.

HP Officejet Pro 8600 Plus e-All-in-One - terrible print & scan options

I just purchased an HP Officejet Pro 8600 Plus e-All-in-One an the print options look like they were written by someone from the 1990s. There are no options for lower resolution - only draft, normal, best and no option for black and white - other than grayscale. The print options box is the default box that was originally develped in the 1990s - no kidding. I also tried scanning some items and the box to see the scan is about 5" x 5" and there is absolutely no way possible to see what was scanned. I originally loaded the software using the disk provided witih the printer, but then I went on line and downloaded the "Full" version - which loaded exactly what was on the disk. I can not believe HP is even selling this thing with these types of drivers. I loaded the drivers onto my HP Desktop, running Windows 7 home, 64 bit and my HP laptop running Windows 7 Ultimate, 64 bit. Both HP computers are Intel I7 Quad core computers w/ 9 & 12 Gb of RAM respectively.
What gives? Do I need to return this thing because it certainly does not work properly and is not up to the HP standard we expect - especially for the $300 it costs to buy the thing. I bought this all in one because HP refuses to update the drivers of my older HP scanner to support Windows 7. That scanner showed the preview with a full screen, allowed me to change resolutions of scans, colors, etc.
Has anyone else experienced this type of garbage?

I agree the HP customer services and product services suck. I have an Officejet Pro 8500 and consistently had problems.
I think I'll change to a Cannon printer or another company. It is apparent that HP does not care.

Officejet Pro 8600 Plus. No automatic scan menu when documents loaded into the auto feeder?

I have a new Officejet Pro 8600 Plus to replace the L7780 which brought up the scan menu when a document was loaded into the autofeeder. How do I get the ne 8600 to do the same thing. I find that I liked the convenience of the auto menu but it does not come up when I load document(s) to be scanned into the auto feeder. Was this feature left off?
This question was solved.
View Solution.

Hi afredb,
I understand you have a new Officejet 8600 Plus and have some questions about the scan feature in comparison to the Officejet L7780. I will certainly do my best to answer these questions for you.
In testing on our own Officejet 8600, I have found that you would be correct, this is a feature that wasn't transferred to the upgraded machines after they stopped making the L7780. There were a few printers in between the L7780 and the 8600, and they didn't have that feature either. I believe the reasoning behind it was that many people use these printers for copying and faxing as well so having the feeder automatically assume it's going to be scanning would have created extra steps for many others. Hopefully this is only a minor inconvenience and you can still enjoy the printer
Hope this helps, have a great day!
Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
**MissTeriLynn**
I work on behalf of HP

Macbook Pro running Maverick doesn't recognize Officejet Pro 8600 Plus as a scanner

I am a new user to the Macbook, transitioning from Windows. I started with a preexisting Offciejet Pro 8500 but couldn't get it to work and discovered there were no Maverick drivers. I then bought and installed the Officejet Pro 8600 Plus wirelessly. I downloaded the HP software package for Mac. I can print. I can scan from the printer to the computer. I can use the HP Scan utility (although the HP apps folder also contains the 8500 apps and I'm not sure which is which). However, under System Preferences Printers and Scanners it only lists the 8600 as a printer and faxer; it does not appear under Scanner. And I cannot access it using PDF Converter for Mac, either. And it refuses to scan an entire legal page, stopping at the letter page limits, whether I use the document feeder or just place it on the glass.
( I also cannot figure out how to set up Network scanning - it asks for a folder address and I am not familiar with iOS nomenclature.)

Hi lahrm
I understand you are having issues scanning on the Maverick.
I will be happy to assist you with this.
I have included a document for how to scan on the Maverick.
I have provided a document for connection issues.
This document provides directions for scanning to a network folder.
If you need more assistance just let me know.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Unable to Completely Scan Legal Size Documents with Officejet Pro 8600 Plus

I am trying scan legal sized documents on my new Officejet Pro 8600 Plus. I have reviewed the forums, and this has been a recurring problem in the past (see link--- http://h30434.www3.hp.com/t5/Scanning-Faxing-and-Copying/Scanning-Legal-Size-Documents/m-p/35416#M14... ), but does not appear to be resolved. Whether I use the document feeder or the glass, the document is cut off at the bottom, and appears to be stopping at the 'A4' size, vs. legal. I cannot locate any setting on the scanner itself, or in the HP Utility software to change this, or even to be able to identify the current setting, if it is one.
I am using a Mac Pro, system 10.6.8, just installed and started using the printer a couple of days ago, and everything is up to date software-wise. Everything else on this machine has been working beautifully.
Can anyone identify what's going on here and how to correct it?
Thanks for your help--I specifically chose this particular unit over the next model down due to the legal sized glass/bed, and if I can't use it to scan legal docs, well, that's a problem. Thanks for your help!
This question was solved.
View Solution.

Hello,
Please try the following steps:
1. Open the HP Utility and select your device.
2. From Scan Settings open the "Scan to Computer".
3. Click the "Scan Tasks" tab.
4. Select the Scan Shortcut used to scan, then click Edit.
5. In the section of Scan from an HP Device click on the blue triangle to enlarge the menu.
6. From the enlarged menu now open the drop-down menu next to Crop To and set as None.
7. Click OK and try scanning again.
Please let me know of any change,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Hardware scanner resolution of HP Officejet Pro 8600 Plus

Hello,
is the hardware scanner resolution of HP Officejet Pro 8600 Plus really 4800 x 4800 dpi as it is claimed or it is made by the software? Thank you.
This question was solved.
View Solution.

Hi Jak44,
Open the Icon labeled Officjet Pro 8600 on your desktop, and then click on Scan a Document or Photo. When the Scan application window opens you can change the Resolution from the drop down menu.
I am an HP employee.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

How do I attach a wireless scanner (HP OfficeJet Pro 8600 Plus) to Acrobat XI Pro?

How do I attach a wireless scanner (HP OfficeJet Pro 8600 Plus) to Acrobat XI Pro?

The printer status report has in line 47 the date (rounded to the week) the printhead was installed. Except in the rare case the printhead has been replaced this would correspond to the date the printer was installed.

Where do scanned documents go I have a hp officejet pro 8600 plus

Where do scanned documents go? I scan from the printer to the computer, it says it was scanned and sent but to where? how do you scan into an email?

When you scan to PC they go to your Documents folder. Mine saves in a folder in Documents named Scans, or possibly Scanned documents. I am using a new machine which has not received any scanned files so I can't remember the exact name but it is usually easy to identify once you open up your Documents folder.
To scan to email you will need to use the printer software installed on the PC to set it up.The document here should help:
http://support.hp.com/us-en/product/HP-Officejet-Pro-8600-Plus-e-All-in-One-Printer-series---N911/43...
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Officejet Pro 8600 Plus - Scan software doesn't have 8.5x11 letter size option

Just bought a new Officejet Pro 8600 Plus.
The included HP Scan software will only let me choose A4 or A5 paper sizes (as well as 6x4, 7x5, 8x6, 10x8). No 8.5x11 option, which is what I want to use most often. (this is from the dropdown options after clicking the "Scan..." button)
Is there something I'm missing? I'm generally pretty good at figuring this stuff out, but I haven't even seen this issue mentioned on forums, so I'm confused.
Also, when using the Scan To Computer function directly from the printer, I get the same result - it will scan my 8.5x11 document and output an A4 size file.
I'm running Mac OS X 10.6.8. I have installed all software and firmware updates I could find. I have my printer's region set to Canada, and bought the machine from a Staples in Canada. Wondering why I can't use any North American size formats?

@Simple1234 - I have reinstalled the software from HP's website, and no change. (it's actually the same version that came on the installation CD - 12.23).
@Sethaniel - I have definitely tried every combination of settings in those drop down lists, so that's not it.
Ruling out OS issues, my girlfriend is running 10.8, and the HP software is doing the same thing on her computer.
Using the System Preferences scanning method, I can choose paper sizes if set to scan from document feeder. If I change to flatbed, I have the option to manually type in the dimensions I want, but then I'm forced to manually drag the crop area to which 8.5x11 portion of the flatbed it will scan. Again, there's no way to just have the flatbed scan a letter size document automatically when placing the page at the top corner of the flatbed, where it shows you to place the page for letter size.
This seems like the most basic function of a scanner! I'm really perplexed by this. I would imagine most people in north america would just want to place an 8.5x11 sheet of paper on the flatbed and have an easy way to scan the correct size with no added fuss.
Printing works fine, and I can choose letter size, and many adjustable settings, so I think this is just a problem with HP's scanning software. I have tried all the usual basic steps, like restarting my computer & the printer, reinstalling software, running software update, looking through all the settings in the HP Scan software, any global settings I could change in System Preferences, tried using a different computer and OS X version, googling the issue, and posting on this forum.
Any other ideas?

OSX 10.8.5 CS5.5 & HP Officejet Pro 8600 Plus

I bought the HP Officejet Pro 8600 plus believeing it is MAC OSX compatable however upon trying to scan into Adobe CS5.5 suite of applications I was not able to scan into any of the Adobe CS programs. I can scan from the scanner into a PDF that the HP printer makes and place it in a folder on my computer but I cannot Scan directly into Adobe Acrobat X or any of the CS5.5 programs.
After a few hrs of searching I found on the user manual on page 50 the following
"The HP Scanning Software does not support TWAIN and WIA scanning on
computers running Mac OS X."
I need to know if this issue has been resolved and if so what is the solution or workaround to scan directly into Adobe Acrobat, Photoshop, Illustrator, Indesign or any of the other Adobe CS5.5 master suite collection.
From what I have read it seems that there are two issues here
1 most programs are moving away from twain and WIA in favor of something else forget what it is and HP moved on but did not consider backward compatability important so they didn't include what is needed.
2. Adobe could use a patch for this other format
If there is no current solution I will return the MFP (multi-function printer) and look for a replacement. I would appreciate any reccomendations from the community for an MFP that works pain free with Adobe CS5.5 and Mac OSX.
Looking for high quality scan with document feeder and flatbed, photo print capability does not need to fax.
Thank you your assistance.

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

HP OfficeJet Pro 8600 Plus - Squeals while scanning

My OfficeJet Pro 8600 Plus squeals very loudly while it is automatically feeding paper through to scan the document to a PDF. How do I stop the annoying squeals?? It does NOT squeal while it's printing ... so I'm assuming it has to do with the feeder tray and the rollers associated there ... maybe??

Hey @DEP001,
Welcome to the HP Support Forum! I understand your HP Officejet Pro 8600 Plus e-All-in-One Printer's ADF has become quite noisy. I would like to assist you with this and may have the steps you need to resolve that issue.
The first thing I suggest is to plug the printer into the wall outlet directly if it is currently in a power surge protector or extension cord. This may sound silly but this will ensure the printer is getting full power and may eliminate any unnecessary troubleshooting. If the printer is no longer getting full power from the power surge or extension cord it may give false errors, have poor connection, paper feed issues and quality issues.
Secondly, I recommend you try the following:
Clean the ADF
Rollers are used to feed paper into the scanner, while the separator pad prevents multiple pages from feeding at the same time. If the rollers or separator pad are dirty, the ADF might not feed the paper correctly. Follow these steps to clean the ADF mechanism.
Open the ADF cover.
Figure : Open the ADF cover (Officejet Pro 8600)
Figure : Open the ADF cover (Officejet Pro 8600 Plus and Premium)
Lightly dampen a clean, lint-free cloth with bottled or distilled water, and then squeeze any excess liquid from the cloth.
Use the damp cloth to clean any residue or dust from the pick rollers and the separator pad.
Figure : Clean the ADF (Officejet Pro 8600)
ADF cover
Rollers
Separator pad
Figure : Clean the ADF (Officejet Pro 8600 Plus and Premium)
ADF cover
Rollers
Separator pad
Firmly close the ADF cover.
Try to print from the ADF again.
Source
Lastly, after you've cleaned the ADF, try a 'hard reset':
Let me know if this helps alleviate the squealing sound when using the ADF.
Have a great day!
E-roq
I work on behalf of HP.
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

HP OfficeJet Pro 8600 Plus - "Scan to Computer" issue on Mac OSX 10.8 or 10.9

Hi...
I have started experiencing the notorious "scan to computer not working" issue on my 1-month OfficeJet Pro 8600 Plus, after having used the feature a number of times flawlessly.
There are a lot of potential solutions mentioned in dozens of relevant posts for both Mac and Windows, e.g.:
"Failed to open a session on the device"...
Scan to computer does not work...
Problem scanning to computer with an 8600 wireless
Unable to enable print to computer...
Enable Scan to Computer - Communication Error
Officejet Pro 8600 Utility does not show my Mac computer in scan settings
A 'Connection Error' or 'No Computer Detected' Error Message Displays during Scanning
HP Wireless All-in-One Printers - Communication Error between the Scanner and Your Computer...
Etc.
However, in my case, no solution works, after several frustrating hours of trying to fix the issue, in Mac OS X Mountain Lion (10.8), or after upgrading to Maverics (10.9).
The behavior of the device points to a software issue, since:
The printer is visible on the network
The print function has been working fine
The HP Scan function works
The generic Scan function from System Preferences works (although in earlier times it did not, or it stopped working soon after invoking it)
The "Scan to Computer" option does not appear in the HP Utility screen (although occasionally, after random sequences of unistalling and installing the software, it reappears)
The HP Installer crashes before completing the installation (this is a latest symptom, apparently happening before unvoking the HP Setup Assistant, which still works fine)
As already mentioned, I have tried all possible solutions, including software and firmware updates, Apple drivers, HP drivers (full featured software), clean (un)installations, followed by computer and printer restarts. Nothing seems to work.
The "Scan to Computer" feature of the 8600 always works on my Windows 7 laptop, after initial configuration.
The next step will be returning the device for a refund, but before resorting to that, I am giving it a last chance, in (the unlikely) case there is something new I have not tried yet.
Thanks,
PNS

facman
I am linking you to an HP Support document titled “Uninstalling the Printer Software” below. I am also providing you the link to the HP software for your printer titled “HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8” below as well.
Follow the first document and uninstall the software. Reboot the computer than download and install the linked software. This should resolve your issue.
Uninstalling the Printer Software
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c02259020
HP Officejet Pro Full Feature Software and Driver - Mac OS X 10.6, OS X 10.7, OS X 10.8
http://ftp.hp.com/pub/softlib/software12/COL44234/mp-107214-1/Officejet-Pro-8600_v12.23.0.dmg
Please feel free to re-post if you have any further questions or concerns we are here to help.
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Hp officejet Pro 8600 Plus scanner document feeder making terrible noise

Similar Messages

Maybe you are looking for