HP Pavilion dv5 running Windows 7 Pro 64 Bit. HP Solutions Center stopped working.

Error message when I try to open HP Solutions Center is:
"HP Solution Center cannot run because your device installation is not conmplete
Please plug in the USBV cable or re-run the setukp program from the installation CD for a network installation.
If this does not complete the installation, or you do not have the CD access the HP help files by clicking the Start menu."
Printer is HP Officejet 4500 Wireless
USB cable has been plugged in with no response.

Never mind. Found my original CD and it is fixed.

Similar Messages

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

I run Windows 7 pro 64 bits ENG, all my software is in ENG and I am presently in the US. Still, when

I run Windows 7 pro 64 bits ENG, all my software is in ENG and I am presently in the US. Still, when trying to install Flash Player (download - RUN) I get a message window in Brasilian Portuguese. can you help me solve this issue? Thks.

Do you get the same if you use the offline installers from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#mai n-pars_header (under the heading Progress bar hangs...)?
Are any of your system settings (code page, ...) set to pt-br instead of en-us?

ITunes wont install on a computer running Window XP Pro 64 bit

I own an ipod and have been a subscriber to itunes for years. I just had my computer rebuilt from a system crash. I had window XP Pro 64 bit OS installed & now i cant reinstall itunes. How do i get my itunes back? Do you have a version of itunes that works on a 64 bit OS that is NOT Windows Vista?

I hope Apple will present a solution ASAP so we don't have to trash our iPhones and iPods! Software applications for multi-media require more gigs of RAM; and therefore, 64bit computers, that can take 120Gs, are becoming more attractive.

Remote desktop connection not working in windows 7 Pro x64 bit sp1 3389 port not working

i have still facing same problem in last two week in my system RDC not working . i have installed in my system windows 7 x64 bit Pro sp1 then i check 3389 port working or not in my system use the command netstat -a -o command in
command prompt but this is my bad luck its not woking in my machine after i have decide to change RDC listening port via registry i have change it 3389 to 3391 after restart my system, and
after again testing using same command but no any change again rdc not listening . After i have search this issue on search engine google bing and microsoft , i have found more solutions but i have try one
uninstalled two microsoft updates first is kb KB2621440 second is KB2667402 and after again restart my system and again installed KB 2667402 But not change i have already enabled Remote Desktop connection in windows 7 and select the option
any version computer running , i have try three and four time enable disable remote desktop connection in my machine . but not change i have all windows firewall disable and uninstalled anti virus they intalled in my machine , and using the Mcafee
stinger tools to scan my machine to remove virus but stinger is not found any thread in system. ihave already run this command in my system sfc /scannow Please Can you help me to fix this issue.

Hi,
When you try to start the Remote Destop Connection, what errors it showed out?
Could the other PCs connect this PC with the RDC?
So you have read this blog?
RDP connections might fail due to a problem with KB2621440 - MS12-020
Did you reinstalled the KB2621440?
Besides, did you follow this guide to enable the RDC connection?
Connect to another computer using Remote Desktop Connection
And also this guide?
Why can’t I connect using Remote Desktop Connection?
Please take a check with those settings again.
Best regards
Michael Shao
TechNet Community Support

HT1689 I can reach the iTunes Store from my iPod Touch, but it will not open on my PC running Windows 7. Message shows that iTunes has stopped working. This happens every time. I have updated iTunes Software. Will not solve the problem. What is wrong

I have uninstalled iTunes several times and reinstalled it on my PC running Window 7 with all updated loaded. When I click on the iTunes Store Box, Nothing happens except for a message that reads:
          iTunes has stopped working.
The following items give me a choice, but no answer comes up. The computer will shut down the website.
          "Check online for a solution and close the program"
          "Close the program."
There is an item below the box that is selectable for View problem details. When clicked a long list of items show up. I have listed some of the problems as written, but I do not understand them. I know the iTunes Store has been available on earlier versions of of iTunes but is not on this version. How can we go back and download an earlier version of iTunes?
     Here are some of the Problem Details:
     "Problem signature: APPCRASH
     Application Name:     iTunes.exe
     Application Version: 11.0.1.12
     Application Timestamp: 50c8fc7e"

I had this exact same problem. I found this fix and it worked for me.
Step 1:
Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll.
Step 2:
Browse and past that file into C:\Program Files (x86)\iTunes.
Hope this helps you. I wish I could remember where I saw this originally so I could thank them.
Good Luck.
Anthony

HP Solutions Center stopped Working on Windows 8

I have been using HP 3210 all in one printer for quite some time on Windows 8. All of the sudden earlier this week or last, I noticed the Solutions Center no longer worked. A message comes up saying the device software has not installed correctly. I have tried reinstalling the entier software, but get the same response. Any ideas of why it was working and now all of the sudden it does not. the printer still prints out fine, just can't use the solutions center.

Hey @BOWZ,
Welcome to the HP Support Forums!
I would like to assist you today in resolving the error with HP Solutions Center 'Device Software has not installed correctly' with your HP Photosmart 3210 All-in-One. Being that you're running Windows 8 there is a good chance that if this was working for a period and suddenly stopped working a Windows Update most likely caused the conflict. Now I know you have already tried reinstalling your software and that failed to resolve anything. I'm going to offer a few more steps here to get your Solutions Center software up and running again.
Step 1: Uninstall your HP Software:
Open your start screen by either clicking on the Windows start button on the bottom left of your computer screen or by selecting your Windows button on the bottom left hand corner of your keyboard to the right of the Ctrl button
Once your Start screen opens just type 'programs and features' and the Programs and Features option should automatically populate. Should it not show as an option then you may need to select 'Settings' on the right hand side and then choose 'Programs and Features'
Once Programs and Features launches a list of all the programs installed on your computer will populate. Locate the HP Photosmart C3210 software and uninstall it. Note: you should see a file that says 'HP Photosmart 3210 basic driver' and one that shows 'Solutions Center,' ensure that they are removed from your computer.
Once the HP Software is uninstalled then reboot your computer
Step 2: Empty your Temp Files:
When your computer comes back on, reopen your Start screen and type 'Run'
Select the Run box and then type in the run box %temp% and select OK
When the Temp folder opens select Ctrl + A at the same time on your keyboard to select everything in the Temp folder
Next release Ctrl + A and select Delete on your keyboard
Almost everything should delete out of this Temp folder. If any files are still being used on your computer you will have the pop up to 'skip' these.
Note: Only Temporary files are being deleted. No files or folders for your actual computer will be removed by doing this.
6. Once the files in the Temp folder have been deleted then close the folder
7. Right click on your Recycling Bin on your Desktop and left click on 'Empty Recycling Bin'
Step 3: Run an MSCONFIG Selective Startup:
Reopen your Run box again and this time type msconfig and select OK
When the System Configuration Utility opens select 'Selective Startup' and uncheck 'Load Startup Items'
Click on the Services tab at the top and uncheck 'Hide all Microsoft Services' at the very bottom
Select Disable All on the right hand side
Select Apply and OK
When prompted, restart your computer 1 more time
Step 4: Reinstall your Software and Drivers:
You're now ready to reinstall your HP Software and Drivers. Please select this link: HP Photosmart and Officejet Full Feature Software and Drivers for your drivers.
Select Download and Run the HP installer when prompted
Follow the on screen instructions to complete the install of your HP Photosmart 3210 All-in-One.
Does Solutions Center work now?
If yes, please re-enable your Startup Services again.
How to Enable Startup Services:
Open the Run box and type msconfig and select OK
When System Configuration Utility opens select 'Normal Startup'
Select Apply and OK
Restart your computer again when prompted
Please let me know if these steps resolve your issue. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Everytime I install itunes on my windows 8.1 64 bit my optical drive stops working.

Eveytime I install itunes my oiptical drive stops working

Hello gpanozzo,
We've an article that can help get your disc drive working correctly again.
iTunes for Windows: Optical drive is no longer recognized, or "Disc burner or software not found" alert after install
http://support.apple.com/kb/TS2308
Cheers,
Allen

Just installed v 10.4.1.10 on computer(win 7 Pro 64 bit). External speakers stopped working.

Worked before the upgrade, not afterward.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

Photoshop 7 (& other old Adobe programs) installation in Windows 7 Pro 64 bit

Recently I purchased a new computer running Windows 7 Pro (64 bit) with 2 TB hard drive and 16 GB memory and faced the task of trying to install Photoshop 7, Illustrator 8, Acrobat 8 Pro, and Dreamweaver CS3 that I had used very satisfactorily on my old Windows XP SP 3, 2GB memory computer with less than 1 TB hard drive. I now have all of these running successfully on my new computer and thought I would share here my experience gleaned from a number of other forums after many hours. I had the most problem with Photoshop 7 which I will describe last. In all cases I had the original genuine installation disks. These are generally needed except for Illustrator 8.
Dreamweaver CS3 -- This installed easily in the Program Files (x86) folder & does not seem to require running in XP compatibility mode
Acrobat 8 Pro -- Same as Dreamweaver CS3
Illustrator 8 -- The installation disk would not work for Windows 7 Pro 64 bit. A solution I found in a Microsoft forum is simply to copy the Illustrator folder and contents into the ProgramData folder on the new computer along with the following dll files in the C\Windows folder of the old computer: icccodes.dll, kpcp32.dll, kpsys32.dll, pcdlib32.dll, pfpick.dll, sprof32.dll These go right into the Illustrator folder. This program needs to be run using XP compatibility mode (after copying preceding files go to Control Panel --> Programs --> Programs and Features --> Run programs made for previous versions of Windows -- follow directions there). It might be possible to copy into the Program Files (x86) folder too, but the ProgramData folder works. I have not actually used Illustrator after doing this, but since it started ok, I presume that there will be no problems.
Photoshop 7 -- My Photoshop 7 was an upgrade from Photoshop 5. The PS 5 installation disk would not run on Windows 7 & when I tried the PS 7 upgrade disk (autorun) I got the message that it could not find a previous version of PS & then shut down the installation. I tried the method used for Illustrator 8 above (suggested on yet another forum with an additional dll identified in another Windows folder), but I got the message "Could not complete your request because of missing or invalid personalization information". This evidently had to do with missing authentication serial code number in the registry. I found some discussion of this in forums but no workable fix in my case which involved an upgrade. Then I discovered inormation in another forum which explained that installation with the disks could be done by inserting the upgrade disk and running it from the setup.exe file instead of autorun. When you do this you are presented with the option of proving your previous version of PS by simply inserting the earlier version PS disk at this pint of the process. After doing this the installation with the upgrade disk proceeds fine. The PS 7 program can be installed in the Adobe folder within the Program Files (x86) folder. However, after doing this and trying to start PS 7 you get the following error (if your hard drive is 1 TB or greater in capacity): "Could not inititialize Photoshop because the scratch disk are full" After much reading I learned that this occurs because PS 7 apparently cannot recognize partitions (volumes) 1 TB or greater. What you need to do is set up an additional partition (volume) on your hard drive. This is easy to do. Go to Windows Help, search on "create partition", choose "Create and format a hard disk partition", and follow the directions. I decided to make a 50 GB partion I named "scratch". The system will assign a drive letter to it. To use the new partion to allow PS 7 to start you need to start PS 7 and immediately press the ALT and CTRL keys together. This will bring up a window where you tell PS 7 which drives to use for its scratch disk. You need to select the newly-created scratch disk(partition) in the first choice and leave the other choices as "None". After doing this you have one last issue. When you try to save any file in PS 7 you cannot save it directly anywhee on the C drive since that drive is 1 TB or greater. What I do is save it to the scratch drive and then later move it from there to where I want it on my C drive. I have seen it suggested to install the PS 7 program itself on the newly-created scratch drive, but I don't know if this would allow saving files to the C drive. When installed the way I have described it does not seem to require operating in the XP compatibility mode.
Hope this helps those of you who prefer working with the programs they are used to on Windows 7 Pro 64 bit.
Ray

Hello Nikhil.
Can you see here?
MAIN MODULE INFORMATION:
   SAP GUI for Windows
   SAP Logon Pad for Windows
   730 Final Release
   7300.1.0.1074
   1337608
SYSTEM INFORMATION:
   Operating system: Windows 8 Pro 6.2 (9200)
You are using patch 0 for Windows 8
Windows 8 is not supported until patch 1 or higher is applied, and for Windows 8.1, you must use
Patch 7 or higher,.
Apart from that the error is not from the GUI side,
See below:
Previous frontend interpretation time   :           109 ms
Previous server response time           :          5078 ms (for 1 roundtrips)
The frontend interpretation time is only 100 ms whereas the server time has taken 5000 ms
Please use a supported version for the OS you intend to use.
You can find this information in note
http://service.sap.com/sap/support/notes/66971
Jude

Early-2009 iMac Windows 7 Pro 64-bit

I have a 24" early-2009 iMac (2.66 Ghz, Intel based, 8 GB of RAM, 2 TB hard drive, Mountain Lion OSX). Apple's website fails to list my particular iMac in the list of machines that can only run Windows 7 Pro 32-bit so I bought a 64-bit copy (there was another website that I located that listed my iMac as being capable of running both the 32-bit and 64-bit versions). Today I went to load Windows 7 throuh bootcamp, but the instructions for bootcamp state that the 64-bit version can only work on iMacs starting in LATE 2009.
Does anyone know if the version of Windows 7 that I have will work with my iMac? Anyone had any success loading Windows 7 Pro 64-bit through bootcamp on an early-2009 iMac?
Please note that I posted a similar question earlier today, but it wasn't listed under this particular community and figured this was the better place to ask this question. Also, I have reviewed other similar postings but most seem to get into the technical issues of loading Windows 7 through bootcamp, but don't address the issue here of using an early-2009 iMac. If, however, I have overlooked such a posting then please direct me to it because I want to get Windows running so I can run Microsoft Office.
Thanks.

There has always been a way to get x64 to install - where there is will there is way. I have 2006 Mac with 64-bit processor (Xeon) but EFI is 32-bit, which would also mean that even if I used 32-bit Windows I would only be able to use a meager 1.9GB RAM! to say I ain't about to and amused at this is an understatement.
http://www.gopulls.com/blog/2009.08.26/install-windows-7-x64-on-a-mac-beat-the-s elect-cd-rom-boot-type-error/
https://discussions.apple.com/thread/2372797?threadID=2372797&tstart=0
http://sergiomcfly.blogspot.com/2008/04/select-cd-rom-boot-type-when-installing. html
Some require using your Windows in a VM first.
VirtualBox is free VM
Windows 8 Preview is also free (32/64 versions)
The iMac was really strange. Even the 2008s had Penryn 64-bit processor and Apple had started supporting both MacBook and MacBook Pro 64-bit (they later degraded MacBook to not being supported in late 2008 - really ).
You want Office, and it might run just fine in 32-bit in a VM so another reason to try VirtualBox - I know Excel runs better natively
Macs that work with 64-bit editions of Microsoft Windows Vista and Windows 7
http://support.apple.com/kb/HT1846
If you see this:
"Installation error: Boot Camp x64 is unsupported on this computer model."
Means just use control+click and "Troubleshooting Compatibility Mode" and/or use the BOOTCAMP64.msi app directly instead of SETUP or anything else. I know Lion Boot Camp support software is even more agressive at this whole "unsupported" stuff - very odd to say the least.

How to install Oracle Client 9i 32 bit at windows 7 Pro 64 bit ?

My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?

efe603fc-4926-43ae-8c83-1b5a92c66110 wrote:
My company hava many computer are running windows xp 32 bit , and now we buy a lot of HP computer are running windows 7 Pro 64 bit . We have Oracle Client 9i 32bit for our database link ,but we have no extra bugde to buy new Oracle license for our database network , so how can I install Oracle Client 9i 32bit at windows 7 Pro 64 Bit ?
Ummm .... client license?
All license questions should be addressed to Oracle. I believe what you'll find is that the license for client installation is free. What you pay to license and support is the rdbms (server) software.
But all licensing questions should be addressed directly to Oracle. A license agreement is a legal issue, and this forum will have no standing in court.

Itunes won't run, Win 7 Pro 64 Bit

Itunes 11.0.1 will not run. For that matter 10.X won't run either. I am running Windows 7 Pro 64 Bit. Multiple uninstall's and reinstalls, still no joy. I am extremely displeased (I own 5 Apple products crippled by this).

Do you get an error message when you try to launch iTunes? If so, what does it say? (Precise text, please.)

T431s BSOD after sleep/hibernation in Windows 7 Pro 64 bit

Hello everyone, I have a T431s running Windows 7 Pro 64 bit and have been experiencing constant BSOD screens when putting the computer to sleep/hibernate. I attached the minidump and some other system files in the following link:https://www.dropbox.com/s/b91hfphsl8hj1t9/N041-Wed_07_15_2015_213839_47.zip?dl=0 It seems to be associated with ntoskrnl.exe and tcpip.sys. DRIVER_POWER_STATE_FAILURE (9f)
A driver has failed to complete a power IRP within a specific time.
Arguments:
Arg1: 0000000000000004, The power transition timed out waiting to synchronize with the Pnp
subsystem.
Arg2: 0000000000000258, Timeout in seconds.
Arg3: fffffa80066fe040, The thread currently holding on to the Pnp lock.
Arg4: fffff8000480b3d0, nt!TRIAGE_9F_PNP on Win7 and higher I would really appreciate any help!

I would really appreciate it if someone could have a quick look at this and give me some tips. Thanks!

Unable to add network printers from Windows Server 2012 R2 to client running Windows 7 Pro x64

New Windows Server 2012 R2 Standard in the environment. Added print services to it and added five HP printers to it and shared them. Also deployed the printers via group policy.
Clients are running Windows 7 Pro x64. The group policy fails to install the printers (error 0x00000002). We get the same error when trying to manually add the printer from the client side.
From Event Viewer: Group Policy was unable to add per computer connection <<printer share>>. Error code 0x2. This can occur if the name of the printer connection is incorrect, or if the print spooler cannot contact the print server.
Any ideas on troubleshooting this?
Thanks.
-John

John,
You might try playing with the HP universal driver, that might help you. Try installing a new shared printer on the server using the universal print driver, then try and connect to it to see if it is any better.
Check these GPO settings to ensure local machines can install the drivers.
1. Configure the following two Group Policy settings:
Computer Configuration\Policies\Administrative Templates\System\Driver Installation\Allow non-administrators to install drivers for these devices setup classesEnabled
2. Device class GUID of printers: {4d36e979-e325-11ce-bfc1-08002be10318}
Computer Configuration/Policies/Administrative Templates/Printers/Point and Print RestrictionsEnabled
Security Prompts: When Installing Drivers for a new connection = Do not show warning or elevation prompt
This article might help you out also:
http://www.eversity.nl/blog/2012/09/windows-cannot-connect-to-the-printer-operation-failed-with-error-0x00000002/
Cheers,
Curt Winter
Certified Microsoft Professional
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied. If you found my post helpful, please mark it as the answer.

HP Pavilion dv5 running Windows 7 Pro 64 Bit. HP Solutions Center stopped working.

Similar Messages

Maybe you are looking for