HP photosmart 6510 - pick up multiple paper when turn on the printer

Dear All,
i using HP photosmart 6510 and i facing the following problem:
-when i turn on the printer it's pick up multiple papers and the feeder roll always working
please help me to solve this problem.
Best Regards,
Alarz company

Hi Alarz,
Welcome to the HP Forums!
I understand that your HP Photosmart 6510 is picking up multiple pieces of paper when you turn it on, and I am happy to help you with this issue!
Please take a look through this Out of Paper guide. An 'Out of Paper' Message Displays on the Control Panel and the All-in-One Does Not Pick Up Paper.
Hope this helps you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Similar Messages

  • HP 8625 picks up multiple sheets when printing

    I've become increasingly frustrated by the paper handling of this printer, and I'm on the verge of returning it to Costco.  I usually print in duplex, draft quality, using 22 lb paper.  Too often, the printer will feed two pages at once, so that the back side of a page prints on a separate page.  Also, it will often pick up multiple sheets (more than two sheets) at the same time so that a bit of print is at the tops of a couple of pages while the bulk of it is on another sheet.  
    I've tried working with the paper width adjustment, but it doesn't seem to be possible to set it for the proper tension to avoid multiple feeds.
    I'm open to suggestions.

    @sr_arizona, Welcome to the HP Community!
    I have some suggestions for you in regards to the issues you're having with duplex printing on 22lb paper, from your Officejet 8625. I have two links for you down below I'd like you to go through. Try all of the steps that you may not have attempted yet to see if they can help this "feed issue". I have a few additional ideas of my own to add as well. If these steps do not help at all, I would lastly suggest calling HP directly to see about a replacement unit!
    An ADF Paper Jam Error Displays on the HP Officejet Pro 8610, 8620, 8630, 8640, and 8660 e-All-in-On...
    An 'Out of Paper' Message Displays and the Printer Does Not Pick Up Paper for the HP Officejet Pro 8...
    Tip: After resetting the printer, make sure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and can help a feed issue.
    You can try running the Print and Scan Doctor from your PC. This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    Try Uninstalling the Printer Software, and reinstalling the Full Feature Driver here: HP Officejet Pro 8620 e-All-in-One Printer series Full Feature Software and Drivers
    Try printing from different programs is important too. If you find that one program will not print as you wish with all print settings selected correctly however, other programs print without any issue, the program itself could have a glitch causing the issue and that sole program should be troubleshot.
    Let me know what happens and we will go from there depending on the results after troubleshooting!
    I hope this info helps you out! If you wish to send me a "thanks for trying to help", click the thumbs up  icon below
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • HP Photosmart all in one C309a printing multiple copies when its set to print only one copy.

    having issues with my C309a its now printing multiple copys when its set to print only one copy.it started doing this 4 days ago and its happening on both my Windows 7 64 bit computer and my Vista 32 computer that both have the latest release drivers already installed need help.HP please sort this issue out.still under warranty do i have to return it? 

    I am using a Motorola SBG900 Wirless Surfboard Gateway - supplied with Bigpond Cable. It is set to be using WPA security and have never had a problem with it before whilst connecting any wireless devices such as a laptop, PDA etc.
    My feeling is that the wireless functionality of this printer needs some serious work before the next release. And furthermore they should never have released it the way it is as it wouldn't pass 5% of user acceptance tests if using wireless. There are too many complaints on this forum and others about similar problems to suggest that I am not by myself here. Dissapointing considering this is the feature that would be at the top of the list of most purchasing this model. It lets down what could of been a vg printer.
    I agree, I think if I want to get this printer working on a wirless network, I will have to set the IP address manually. The problem is the printer refuses to connect to the router now even after it connected a few days ago with no intervention. I have powered down both the router, PC, and printer without any luck yet. I will set the IP address manually first on the printer and see how it goes, then if it connects will see if the PC/router can see the printer during the SW install procedure which has failed >10 times to date.
    For now I think I will stick with Ethernet as it is no doubt much faster anyway and will try the wirless setup again in a few days when my patience grows back. Does anyone know differences in speed between USB/Wireless/Ethernet? I know this is dependant on a number of things but just interested in ball park figures here.

  • HT1338 when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 70

    when I try to print, I get this error message "Communications Failure: The computer is no longer able to communicate with your printer. " followed by intruictions to turn off the printer and check connections etc. I am using an HP Officejet 6500 709e, connecter wirelessly

    I'm using a mac (OS X - snow leopord) and am printing over the network (wirelessly).
    HP Photosmart Premium Fax All in One - C410a
    I was only able to print one page and then both my printer and my computer would display an error message about the printer's inability to print.  Since then I've been able to resolve my specific problem.
    I
    1. uninstalled HP from my computer (checked to ensure that my printer was no longer visible in my printers and the HP Utility software was nowhere to be found), 
    2. grabbed the software/driver update from Aug, 2010,
    3. installed the Aug, 2010 update, and my problems seem to have been fixed.
    This is where I got my 2010 update from (obviously you should get the driver/software applicable to your OS and specific printer):
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-85379-1&cc=us&dlc=en&lc=en&...

  • In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards.

    In Contacts version 8, how can I print ALL information in each individual card? When I select the print command the only thing printed is the name and address. I need phone number(s) and all other information in the cards. We enter various pieces of data, other than the standard name address & phone numbers and we print all information on each card so it fits in a 5x7 inch loose binder. We have used InTouch software for many years and it has served us extremely welll, however, the publisher (The Prairie Group) has not, and apparently has no plans to update their software to be compatible with any Mac OSX OS beyond 10.6. Any help will be appreciated!

    You can select what you want included in a list format. In the Print command from Contacts, click the Show Details button. Then in the Style pulldown menu select "Lists" and there you'll be able to select what you want included. You can also select what you wish included if you select the Pocket Address Book style.
    If neither of those options will work for you, then you will need to look to third-party software. Here's one possibility that seems to get good reviews:
    https://www.macupdate.com/app/mac/15485/labels-&-addresses
    I haven't done more than try it to make sure that it works with OS X 10.9's Contacts, which it does, but you can download their demo and try it yourself.
    Regards.

  • I need to use a Driver Version 1.4 for my my Sharp printer.  When I add the printer, it is driver version 1.3?

    I need to use Driver Version 1.4 for my Sharp printer.  When I add the printer it says Version 1.3?

    Have you asked Sharp whether they have a driver that is Mavericks compliant?

  • When saving from the print menu to PDF to iBooks, it saves it as unnamed document.

    When saving from the print menu to PDF to iBooks, it saves it as unnamed document.
    Would like to be able to give it a name before saving it, or at least have a rename function in iBooks.
    Can use Preview and rename it in Downloads and then move it to iBooks.  Very cumbersome.
    Thanks.

    When saving from the print menu to PDF to iBooks, it saves it as unnamed document.
    Would like to be able to give it a name before saving it, or at least have a rename function in iBooks.
    Can use Preview and rename it in Downloads and then move it to iBooks.  Very cumbersome.
    Thanks.

  • Why do my applications quit when I enter the printer setting for my Epson 10600

    why do my applications quit when I enter the printer setting for my Epson 10600

    Which Mac and OS do you have?

  • HT3669 Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this opt

    Since I starting using my MacMini (2011 version) I have not been able to print double sided from my HP Photosmart plus - there is no option for this in the Printer dialog box as there was in the similar dialog box on my PC. How do I set up this option?

    1. You did not get an error message telling you that your iPhoto library was getting full. You got a message telling you that your HD was getting full, right?
    OS X needs about 10 gigs of hard drive space for normal OS operations - things like virtual memory, temporary files and so on.
    Without this space your Mac will slow down as the OS hunts for space on the disk, files will be fragmented, also slowing things down, apps will crash and the risk of data corruption - that is damage to your files, photos, music - increases exponentially.
    Your first priority is to make more space on that HD. Nothing else can be done until you do.
    Purchase an external HD and move your Photos and Music to it. Both iPhoto and iTunes can run perfectly well with the Library on an external disk.
    Your Library has been damaged from being run on an overfull disk.
    How much free space on it now?

  • When I open the print command page it's blank

    When I try to print an online pdf document that I see on my screen and press the appropriate button to send the command to my printer (or use CTRL +P), I get the Adobe printer command page totaly devoid of words.  Just buttons with no labels.  The boxes for showing which pages are to be printed show but no words.  Pressing the button I figure must be the print command allows me to print the entire document, even if I only want one page. I have deleted Reader entirely and reloaded it.  Same problem.

    I am using Adobe Reader X, version10.1.2
    This is one of the two versions of the print command page I get.  I got this by using CTRL+P.  The fade in commands on hover commands at the bottom of the page of the pdf document would not work - no response at all.  I will see if I can create the other empty printer command page after I send this one.
    Thank you for responding
    Send a free greeting card  with SendOutCards:  I'll buy the card & the postage!Go to www.sendoutcards.com/42233
    The SOC Guy  (208) 861-9559
    Date: Fri, 27 Jan 2012 06:51:02 -0700
    From: [email protected]
    To: [email protected]
    Subject: When I open the print command page it's blank
        Re: When I open the print command page it's blank
        created by Ankit_Jain in Adobe Reader - View the full discussion
    Which version of Adobe Reader is installed on your system? Also, would it be possible for you to post a screenshot of the print dialog you are receiving.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4168646#4168646
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4168646#4168646. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Adobe Reader by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • How can I get the page to curl when turning to the next page in iBooks author?

    How can I get the page to curl when turning to the next page in iBooks author?

    I don't think you can. If you need that effect, you should use ePub (that can be authored via Pages) not iBA.
    I hope Apple give us the option in the future though.

  • HT1937 my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    my receiver volume (5s) is very low even when turned all the way up. is there a setting to correct?

    Hello dreuer
    Try out some of the troubleshooting steps in the article below, it will go into checking Bluetooth connections as well as restarting your iPhone.
    iPhone: Receiver and call audio quality issues
    http://support.apple.com/kb/ts5196
    Regards,
    -Norm G.

  • I'm trying to add a printer to my account, however when I enter the printer code, the website errors

    I'm trying to add a printer to my account for the first time.  However, when I enter the printer code, the website popup screen errors out and doesn't advance to the next function.  Any idea what's going on with this?

    Hi Dav_gigem,
    When did you print the ePrint info page?
    If it is ok with you please print another info page, and as soon as you print it please enter the code in the ePrint center.
    The reason i m asking you to do this is because the code expires within 24hrs.
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • I can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

    i can't seems to print using my macbook air with hp series printers. When I plug the printer via usb to my system, the printer was recognized and installed. But when i send a doc for printing, it doesn't print all . Any help?

    Greetings,
    Here's a direct link to the drivers you need, they should work perfectly for your situation.

  • How do I turn off the printer colour management in printer drivers on my photosmart C7280

    photosmart C7280
    How do I turn off the printer colour management in printer drivers 

    HI whcotton,
    You can click here to go to a post for help with disabling the printer color management for your printer. This person was having the same issue as you and the accepted solution worked for them. Hope you find this helpful.
    If I helped you at all it would be great if you clicked the blue kudos star!
    If I solved your post please mark it as solved to help others.
    I'm a printer tech with HP.

Maybe you are looking for