HP Photosmart C4795 when printing addresses and return addresses on envolps are not lined up.

The return address or mailing address when printed on the envelop are not ligned up correctly on the envelop in the correct location. The Return Address is printed in the middle top of the envelop instead on the left upper corner, the Mailing address is printed to far to the right of he envelop.

x3,
Follow these directions and check these settings to print envelopes from Microsoft Word.
Click Tools , click Letters and Mailings , and then click Envelopes and Labels .
Type the Delivery and Return address information.
Click Options .
On the Envelope Options tab, set the following options:
Envelope size : Set the envelope size to match the loaded envelopes.
US only : Select Delivery point barcode to make it easier for mail sorting machinery to correctly route the envelope.
Return address : Set the Return Address position .8 inch in the From left section for Size 10 envelopes only.
Envelope Options tab
Click OK .
Select the Printing Options tab, and verify that the following settings are selected:
Select the Feed Method option that shows the envelope on the far right side with the short edge first.
Select Face down .
Examine the selected feed method image and verify that the envelope flap is on the left side of the envelope. If it is on the right, select or deselect Clockwise rotation .
Printing Options tab
Click OK , and then click Print
Let us know if it helps, Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Similar Messages

  • When printing Gantt chart, some of the bars are not appearing in it

    When printing Gantt chart, some of the bars are not appearing in it
    I have added print tag in xml of chart mode-multiple pages.
    <print mode="MultiPage" print_all_columns="true" />
    For printing, I right ckicked on chart and clicked on Print chart..
    Edited by: Sheetal on Mar 29, 2012 2:46 AM
    Edited by: Sheetal on Mar 29, 2012 2:51 AM
    Edited by: Sheetal on Mar 29, 2012 2:56 AM

    Sheetal,
    Did you ever find a reason as to why the bars were not printing? I'm experiencing the same problem with Apex 4.1.1. Only the first part prints. Here is the print tag:
    <print mode="MultiPage" print_all_columns="true" columns_on_every_page="2" fit_timescale_to_end_of_page="false">
    I've changed some of these settings to no avail.
    -Seth.

  • My wife and I share the same email address and Apple ID.  We are not able to send and receive Text Messages to one another.

    My wife and I share the same email address and Apple ID. We are not able to send and receive Text Messages to one another. Is the cause of this because we share the same Apple ID? Will we have to set up 2 separate primary email addresses to be able to  send and receive Tex Messages to one another? Like I said, we share the same email address and woul like to keep it that way to keep up with our email together. Is there a way to by-pass having to set up 2 primary emaill addresses if this is the problem?
    Thanks.

    go to the settings and turn off imessage
    but that don't change the issue that you will never be able to facetime eachtoher
    the appleID is really meant as the handle that identify you it was not meant to be shared
    but can see that people may want to do not buy apps more then once

  • When texting someone and they reply their replies are not coming through to me and they are being told they are texting the wrong Ipod number....help!

    I tried to text my moms phone yesterday and she said she replied but I never got it....a couple hours later someone texted her and said she was texting the wrong number. I had to have my iTunes re-enabled because my account was compromised, could they have given my old number to someone else if so how do I get a new nukmber for my ipod for texting?

    You don't need to login to these workstations at all
    for the registry to take effect. All you need to do is let the workstations sit in the OU and "soak" the new policy , then restart the stations remotely/manually once or twice. I have about 60 OUs that work this way.
    the only other 2 things left are: 1) check if policy replicates to all DCs 2) format reinstall that client or use 2-3 different clients and 2-3 regular PC workstations to test the settings. the 2nd option will confirm if the DevotIT locked the registry settings
    down or not.
          I am using two computers to check this and one uses Windows Vista, the computer configuration settings are being applied, but when I do a gpresult /h c:\report.html and have a look there are no registry entries in there.  When I
    do the same thing on the thin client, the registry entries show up in the report.html file.  Why would that be?  Is there an issue with Windows Vista?
         Also, how can I troubleshoot the replication without creating folders on sysvol.  I don't want to mess with sysvol folder.
         Do you know what the Error message means?  I am trying to search for it but haven't really found much.  Is there maybe a listing of errors with GPOs? 
       ***** UPDATE:  *****
               I checked the details of "Thin Client Lockdown and I have Computer version: 18 (AD) and SysVol (19)   
               They are supposed to be the same numbers correct?
       ***** UPDATE: July 11th, 1:29 pm *****      
               I created a new OU and new policy from scratch.  No modifications at all and all new names.  There should be no conflicts at all.  Still getting that error.  No matter how many times I reboot and
    no matter what domain server comes up, I still get the same thing.  Both my vista computer and thin client have been moved over to the new OU.
             I might create a new thread to put more attention on this issue.

  • When printing a book to PDF, bookmark definitions are not saved

    I recall seeing another post about this issue and I can't find it now, but none of the workarounds mentioned there worked for me, so here goes:
    I am working on a book migrated from FM 9 to FM 11, and when I print to PDF, I specify the bookmarks I want to display in the Bookmarks tab of the PDF Setup for Selected Files dialog. The PDF prints fine, but when I want to print the book again, FM doesn't remember my settings, forcing me to set the bookmarks from scratch every time. This has proven pretty tedious seeing that I'm working with an old book in which the styles aren't intiutive, so trying to remember all of them every time isn't the best of fun. When I print a single file in the book, the settings are saved properly.
    In the previous post, I remember reading that this was a bug in FM and trying the following suggested workarounds (none of which worked): Switching to structured mode; saving the desired setting in one file in the book, printing that document, and then printing the book (was supposed to result in FM remembering the settings for the entire book); saving the book right after it prints; selecting all files in the book and saving as PDF, as opposed to selecting the book and then File > Save as PDF.
    I'd be glad to know if anyone has any ideas, or if Adobe are planning to post a fix for this issue.

    It is my understanding that FrameMaker uses the setting stored in the first document of the book when creating a PDF from a book. So, open the first file in the book and make a PDF, setting your bookmarks as you want for the whole book. Then create the PDF of the book. Check the settings before you click Print to make sure they are what you want. You may have to make a few changes, but it should remember them the next time.
    I work with FM 9, so this may not be relevant to FM11. I find it necessary to open the PDF settings dialog each time I make a PDF of a book, and click Save/OK/whatever, to make sure the bookmarks are created correctly. The settings are always correct, no changes needed; but I find it necessary to open the dialog and close it to get the bookmarks correctly indented in resulting PDF. It may have been fixed in FM11.
    Van

  • Printing #10 Envelope - Return Address "off the page" & Address Very High

    I'm having trouble printing a #10 envelope.
    I have an Okidata B410d printer that Pages seems to subtitle a "Generic PCL Laser Printer."
    I went -- File / Open From Template Chooser / Word Processing / Envelopes / Classic Envelope
    I fill in the fields and the page attributes shows my printer, #10 Envelope and a landscape orientation.
    But when I feed through the bypass tray -- following the little icons telling me face down, flap left, ... -- the result prints the address two lines from the top of the paper and no sign of the return address field (if it existed it would be an inch off the paper to the top if you follow.
    So I figure there might be some way to change the setup / margins / headers / ...
    I managed to get something sorta acceptable by changing the default header from 0.95 cm to 4.2 cm -- it wouldn't let me go any more. The result had the return field hugging the top of the paper and the main address starting maybe 1 1/2" from the top. the envelope looks funny by I had to get something in the mail today.
    Now I'd like to make this right.
    Any advice?
    Thanks

    Who knows what I've done but after much trial and error (and more than a few of those pages cut to match a #10 envelope I seem to have something I can work with.
    I guess, as you said, there is some funny business between my printer and Pages.
    I'll detail the steps as much so I can retrieve if necessary. What I did:
    * Found a template that used a floating text box for the return rather than a header.
    * Changed the page size from the #10 default of 24.13 cm wide x 10.48 cm high to 24.13 cm wide x 24.0 cm high to "fool" it to working.
    * Left side margins unchanged
    * Set top margin to 11.5 cm and bottom to 0.0 cm
    * Dragged the return address floating text box so it is centred top to bottom on the envelope (a look I like)
    * Finished output has return address flush left, centred top to bottom and the address filed aligned with top line of address and return address fileds the same.
    * Saved as a template in my templates.
    * Tested that I could retrieve the template, type in info and print okay.
    Like I said ... it ain't elegant but now I can print out a proper looking #10 through the bypass feed of my Oki printer.
    Thanks for your help.

  • My Photosmart D100a wireless printer keeps changing IP Address when router reboots.

    My Photosmart D100a wireless printer keeps changing IP Address when router reboots.
    This question was solved.
    View Solution.

    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') to 250
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway.
    - Enter 8.8.8.8 for the first DNS and 8.8.4.4 for the second DNS.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page.

    When printing a list in Address Book, how can I select more than the default Attributes and keep them selected when I print again? I want to print ALL information for contacts so I have email address, notes, phone, company, title, etc all on one page. I don't want to have to check off an additional 5 or 6 attributes each time I print out contact information. Is there a way to change the default setting for printing lists, so it is not just "phone," "photo," and "job title?"

    I have a user who wants to do this same thing. I did not find any way either to default the attributes to anything other than what you see the first time. Seems like such a trivial thing, hard to believe they do not allow it. I did find a program for this called iDress but I can't seem to download it from any links on the Internet. Not sure if it is free or not, but it was recommended by a link on the Mac support site.

  • How can I print my Avery return address labels (easy peel) template 5195 on my mac?

    How can I print my Avery return address labels (easy peel) template 5195 on my mac?  When I try to print them via avery website, they appear shunk on the page.

    What application are you trying to print from? Address Book has the ability to print using various label templates. I think you can do the same from Pages or Word.
    Best of luck.

  • Mail switches sender's name and return address

    My wife and I each have separate accounts in OS X Mail. Sometimes when she sends email, Mail incorrectly puts my name and return address as the sender of the email. At first I thought it was human error, but recently I've tested the app and discovered that Mail is indeed randomly and intermittently switching the sender name from hers to mine, even when her name appears in the New Message window. Any ideas on what could be causing this and how to remedy the situtation?
    G4/400 tower   Mac OS X (10.4.8)  

    Do you have separate OS X user accounts? or just use different email accounts within OS X's Mail application?
    You should be using separate OS X user accounts. Then each of you will only have your account information entered in OS X's Mail application.
    I have 5 or so email accounts defined in OS X's Mail application and I always have to vigilant that messages are sent with the correct account information.

  • Attempted to mail an email with a large attachment file.  One of the addresses was bad.  When my Outlook is running, the Mac tries to send it and shows the progress.  However, when I look in my Outbox the files are not there.  It does show up in the Outb

    attempted to mail an email with a large attachment file.  One of the addresses was bad.  When my Outlook is running, the Mac tries to send it and shows the progress.  However, when I look in my Outbox the files are not there.  It does show up in the Outbox progress section but I can not delete it when it is there.
    Where do these files reside?
    Is there a hidden Outbox??
    MacBook Pro, Mac OS X (10.7.1)

    If you think getting your web pages to appear OK in all the major browsers is tricky then dealing with email clients is way worse. There are so many of them.
    If you want to bulk email yourself, there are apps for it and their templates will work in most cases...
    http://www.iwebformusicians.com/Website-Email-Marketing/EBlast.html
    This one will create the form, database and send out the emails...
    http://www.iwebformusicians.com/Website-Email-Marketing/MailShoot.html
    The alternative is to use a marketing service if your business can justify the cost. Their templates are tested in all the common email clients...
    http://www.iwebformusicians.com/Website-Email-Marketing/Email-Marketing-Service. html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Hp photosmart 7150 only prints black and white with mac

    My hp photosmart 7150 only prints black and white with mac.  I have tried installing and uninstalling, installing drivers, but no change.

    Hi,
    You did not mentioned your Mac OS X version, however I assume you have one of the latest versions.
    The Photosmart 7150 is not supported on Mac OS X v10.6, v10.7, v10.8 or v10.9 and therefore it is more than likely that there are no drivers for your OS and the used Generic Driver only provide B&W printing.
    Although it is not officially supported you may check 3rd party solutions such as the 3rd party HP-IJS print drivers which list your printer as supported.
    Be sure to install any of the 3 required downloads, then click the plus sign under Printers & Scanners, click the Use drop down and click on Select Printer Software.
    Search for your printer model form the list and select the driver, I believe that may work:
    http://www.linuxfoundation.org/collaborate/workgroups/openprinting/macosx/hpijs
    Although it only list up to 10.8 (Mountain Lion) it should also work on Mavericks from my experience.
    Hope that may help,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Shipping address and Delivery Address in PO

    Dear Gurus,
                               My client asking for separate shipping address and billing address (both different) in PO.Is it possiblie?? the shipping address will come from plant address and how to make billing address in PO?
    Thx in adv.................

    Hi
    it is possible ,
    If you have permanent billing address then ask Abaper to make changes in Po print form and make changes according that
    or you can give in text in Po at header level also which will get print in PO
    Regards
    kailas Ugale

  • When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.

    Problem:
    When I plug in my iPhone to sync, it starts but does not complete the process and several pieces of data are not being transferred to my iPhone from my MacBook Air.
    Any help that you can provide in helping my iPhone accurately sync with iPhoto and iTunes will be greatly appreciated.
    Symptoms:
    1)   Sync:  It’s not completing the sync.  Below, I’ve provided all of my settings from the iTunes Summary tab so that you might tell me if I’ve selected any incorrect options.  I prefer to sync the “old school” way – by connecting to the computer – as opposed to syncing over the cloud. Perhaps this is what’s causing the problem? Here is a list of the steps displayed in the iTunes window as the sync progresses:
    waiting for sync to start (step 1 of 7)
    backing up (step 2 of 7)
    preparing to sync (step 3 of 7)
    determining apps to sync (step 4 of 7)
    preparing apps to sync (step 5 of 7)
    importing photos (step 6 of 7)
    waiting for changes to be applied (step 7 of 7)
    syncing apps / copying 1 of 4 (App name) (step 7 of 7)
    canceling sync
    apple icon
    2)   Photos: I've selected only certain of my iPhoto albums to sync to my iPhone.  All of the albums are correct/complete in iPhoto.  All of the albums are listed on my iPhone, both before and after the sync, but the albums are empty (no actual photos) before and after the sync. Perhaps this is tied to the fact that the sync isn’t completing, but because “importing photos” is one of the steps that the incomplete sync displays, I don’t know.
    3)   Apps: When I launch iTunes and click on the Apps folder under the Library listing, then click on the Updates tab, iTunes searches for any Apps needing to be updated and provides a list.  If I click on Update All, the Apps are successfully updated in iTunes.  But, when I plug in my iPhone so that the updates will transfer to the apps on my iPhone, the updates don’t transfer to the apps on my iPhone and those apps still reflect that they need updating on the iPhone.
    Other Potential Pertinent Info:
    The flash memory hard drive on my MacBook Air recently died (perhaps a month or two ago).  Apple had emailed me about a known issue and literally the next day, my MacBook Air crashed.  I installed a new flash memory drive and re-installed everything from a backup off of an external hard drive.  Everything seems to be working fine; it recreated accurately all of my software and data, including iPhoto and iTunes, the pictures and songs (respectively) for which are stored on that hard drive, as opposed to being on the flash memory in the MacBook Air itself.  However, I don’t recall if the start of the sync problem described herein started happening at the same time that I replaced the flash memory drive.  All I know is that the computer is working perfectly in all respects and that even as the sync is failing, it at least says that it’s doing the right things and looking in the right places (e.g., the list of albums on my iPhone matches the list of albums in iTunes, etc.).
    Settings/Status:
    MacBook Air
    OSX v. 10.9
    iPhoto ’11 v. 9.5 (902.7)
    iPhone iOS 7.0.4
    iTunes v. 11.1.3 (8)
    Summary Tab
    Backups (This Computer)
    Options
    Automatically sync when this iPhone is connected
    Sync only checked songs and videos
    Photos Tab
    Sync Photos from iPhoto (429 Photos)
    Selected albums, Events, and Faces, and automatically include (no Events)
    Albums – 9 are selected

    You need to download iTunes on your computer. iOS 6 requires the latest version of iTunes which is 10.7.

  • HT5624 My husband and I share an Itunes account so use the same email address and password.  Our iphones are now connected and we get each other's messages and share each other's contacts.  How can we stop this happening?

    My husband and I share an Itunes account so use the same email address and password.  Our iphones are now connected and we get each other's messages and share each other's contacts.  How can we stop this happening?

    A couple of different approached:
    Create a second AppleID for one of you that includes the email address and phone number you wish to use for messaging, but do not apply it to the iTunes and app store (just keep the current one). My wife and I do this and it works quite well. Also allows for easier syncing of Contacts , notes etc. using icloud if you wish to do that.
    Add additional emails/phone numbers to the existing account and change the Send/Receive settings for Messages. this will not fix the Contcts isues for you however.

Maybe you are looking for

  • Can I install Windows 7 Pro 64bit on my Machine?

    My MacPro 8 core with 6GB of RAM is running MAC OSX 10.5.8. How can I tell if I can run Windows 7 Pro via Boot camp? Is my Mac machine 32bit or 64bit? Thanks Chaz

  • I have a very bad problem with java I try many solution but all the solution failed

    Hello friends, My system  10.8.3 Macbook pro I try many solution in the  Hello friends, My system  10.8.3 Macbook Pro, I use Safari 6.0.3 Java is not working. I try many solution in the  internet but nothing work with me , And I feel very sad One of

  • 2 GB RAM:  Is it enough?

    I was also wondering, does having a 17" inch display with only 2GB of RAM make the computer a little slow? Does it even matter?

  • Battery consumption in power supply operation

    Hello there. i have a Problem with my MacBook Pro 15 i5 using Windows 7 with Bootcamp: If i start my Mac with Windows 7 ( Power Supply and FULL Battery ) and start play a game ( for 2 or 3 hours ) the Battery is almost empty (Windows Info: "Power Sup

  • IBooks app for OS 5.1.1

    I have an iPad with OS 5.1.1, and 5 megs of free RAM.  I bought it specifically because I want to download iBooks from the iTunes store, but now I find that I need the free iBooks app to do that, and when I try to download it, I'm told that I can't b