HP Photosmart PSC 2400 all in one - will it work? or what else?

I have been using an old eMac connected (by cable) to my printer (HP PSC 2400 Photosmart all in one), wirelessly connected to my macbook and mini for printing. Well, i think the eMac just bit the dust. Can I hook the HP to the airport extreme? And if not, what printer WILL work, cuz i really can't afford a new desktop computer right now. I have:
airport extreme 802.11g
version 5.7
HP PSC 2400 Photosmart all in one
OS 10.5.6 on:
macbook black 13in 2GHz intel duo
2GB ram 667MHz DDR2 SDRAM
There are also a couple airport expresses in other parts of our property so that the mac mini out in the barn can connect, if that makes any difference.

thanks - guess i need a new printer.
Another question - if i plug a printer into an airport express that is between my laptop and the airport extreme (which is actually the one connected to the cable modem), will that work (and will it still keep the network going)? CAN i even plug one into the express? Guess i should have looked that up too.

Similar Messages

  • How do I install driver for hp psc 2400 all in one series AND safe wsnmp32.dl​l Without a Disk?

    How do I install driver(s) for hp psc 2400 all in one series ( WIndows 7 laptop)   AND a safe version of wsnmp32.dll -- Without a Disk?    A tech took the driver off my laptop and I now have no printer/scanner.  Help!!
    Much thanks!

    Hello,
    I see that you're having an issue installing the software. I would suggest following this document, which will guide you through several steps on how to resolve the issue.

  • RE: Hp psc 2400 all-in-one

    Once in a while, out of the blue, power light will blink and will go to turn on and align and then there is this grinding noise... It can be continuous FOREVER unless we unplug. Sometimes, I have tried unplugging everything, and starting everything up all over again, and it's worked. Now it won't.   H E L P !!! 

    Recently I also encountered such  problems.  Once I switched off and re-starting printer again, the button light blinking and also made lot of
    noice.  
    First I tried to swap USB port and restart. But when I switched off printer, same thing occur.
    The later I switched off reuther and  modems. The started the printer and pc, now everything go back to normal. But hopefully it will never be
    occur again.  I just wonder what cause this printer so annoying?

  • Hp Photosmart C7280 all-in-one will not work with Snow leopard

    My nephew just installed Snow Leopard on my IMAC 2008. I cannot get to printer to work. I have tried uninstalling the HP software and reinstalling. I have updated the software thru Apple updates. It still won't print or scan any documents.

    I would recommend these instructions (they don't hurt anything), however, different circumstances require different solutions.:
    Try deleting the printer .plist files and see if that helps.
    Go to ~/Library/Preferences and move the following files to the Trash.
    com.apple.print.add.plist
    com.apple.print.custompresets(your printer manufacture name).plist
    com.apple.PrinterProxy.plist
    com.apple.PrintingPrefs.plist
    Restart your Mac.
    Carolyn

  • HP PSC 1507 All-in-One - Scanner stopped working

    Hi
    I'm on a MacBook Pro with Snow Leopard (10.6.8) and use VueScan (9.1.16) to scan through USB connection.
    For several years, no problems, always worked.
    No all of the sudden it stops working.
    It scans jitter (black/grey/white dots).
    Anythings I can fix or look at to see what's the problem?
    Thanks
    Dee

    Hello Dee! aka @KunoichiDee, welcome to the forums
    I read about how your scans are now showing up in bad quality, when scanning to your Mac. I have some ideas that might help.
    First of all, we want to know if the problem is with the printer, or with the software. Make a copy from the printer itself to test the printer. If the copies have the same issue as the scans, the issue is with the printer, and I would recommend a power reset and ensure the printer is plugged in directly to the wall outlet, avoiding power bars and surge protectors. This ensures the printer is receiving full power and may help greatly.
    Power reset:
    Press the Power button to turn on the product.
    With the product turned on, disconnect the power cord from the rear of the product.
    Unplug the power cord from the wall outlet.
    Wait at least 15 seconds.
    Plug the power cord back into the wall outlet.
    Reconnect the power cord to the rear of the product.
    If the product does not turn on by itself, press the Power button to turn it on.
    If the copies turn out fine, and the problem is only when you scan, try these steps:
    Mac OS X: How to reset the printing system (This will delete all printers on your Mac)
    Repair disk permissions
    Restart your Mac
    Re-add the printer (do not use the AirPrint driver)
    Let me know the results! Good luck & enjoy your weekend
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Hp psc 1200 all in one printer not working

    I reformatted my disk after downloading Yosemite, as some programs were very slow to respond.
    My colors in laptop MacBookPro were washed off!
    Now after downloading new Yosemite software, my printer is not getting recognised!
    Drivers from HP site don't work too.
    Any good advice is required.
    Thanks

    According to http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?lc=en&dlc=en&cc=us&product=3 74575&sw_lang=&os=219&#N701 there's no software, but only a driver that supports SL printing, but not scanning.

  • HP psc 1210 all-in-one printer and Mac OS 10.9 (Mavericks)

    I just installed the new OS X (Mavericks) on my mac yesterday, and now my printer, an old but reliable HP psc 1210 all-in-one, will not install.  I was previously running OS 10.6 (Snow Leopord) and had no problems with the printer.  Is there anything I can do to install my printer on the new OS?  My computer doesn't even recognize that there is a printer connected via USB when I try to install it... is there anything I can do?

    Hello,
    Here is a link to a support document on hp.com on how to install on OS X Mavericks.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967522&tmp_track_link=ot_faqs/top_issues/en_u...
    Let me know if this was usefull by clicking on the Kudos button.
    I work for HP.
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • HP psc 2110 all in one and Windows 7

    I have an old HP psc 2110xi all in one printer that worked fine on Windows XP.  I followed the HP site instructions and did not try to load the install disc that came with it on my new Windows 7 64-bit computer.  I just plugged it in and Windows 7 was supposed to have a drive for it, but there would be limited functionality of the tools per the web site. 
    Well actually I can now only scan to image files.  The windows scan program offers only: BMP, JPG, PNG and TIF as file choices in the drop down menu.  I can no longer scan to pdf files. 
    I have lost a lot more functionality than just not being able to see the ink level,clean the cartridges and print a test image.  I am most interested in the lost ability to scan to a pdf file.
    Does anyone know how I can get this back?

    Hi,
    Indeed the provided functionality offered by Windows Image Aquision scanning is more limited and does not PDF support.
    If you Have MS Office you might be able to scan PDF files with it in some of the editions (I believe MSOffice should support WIA scanners as well):
    For example, Office 2007 can provide those capabilities as you may see within the linked document.
    You may also check 3rd party software (as VueScan for example) which support your scanner and provide PDF and OCR scan capabilities.
    For ink level, i believe the Extended Self Test report should provide the ink levels, however i'm not perfectly sure.
    You may try printing a report as following:
    Press Setup and Start Color . Press the Right Arrow to scroll to Model Number and Press Enter or OK
    You will not be able to get any functionality back, as te device does is not fully compatible with Windows7..
    Hope it helps,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Does the hp psc 1210v all-in-one have the ability to print back to front?

    My hp psc 1210v all-in-one is still working and it is driving me crazy that this printer doesn't have the ability to print back to front. I am also upset that there is no software to print double sided like with the newer hp printers.
    Is it just me or would this printer be perfect if it had these features?
    This question was solved.
    View Solution.

    Printing back to front is actually a feature of the software you are using.  You can do this in Word on your printer now.  This link will go into more detail: "Printing Back to Front."
    Lastly, two-sided printing is an accessory part that you put on the back of the printer to make it turn (called a duplexer). Once again, not a feature that can be added to a driver, or this printer for that matter.  Sorry to be the bearer of bad news but on the plus side, at the HP Parts Store, there are enough parts for this printer, you could keep it running for decades.  
    I am glad you like it.
    Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
    When a solution is found please mark the post that solves your issue.
    Every problem has a solution!

  • Psc 1315 all-in-one printer will not feed paper. There is no paper jam.

    psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.

    hi there sorry to learn that you are having this issue.
    Are you still facing this issue? If you are I will do my best to help you.
    Have you upgraded the firmware of your printer lately; you can get the latest firmware in the main support page for your printer 
    This is the main support page for your printer,  GO HERE Go to software and drivers download and select your operating system. You should also upgrade the firmware of the printer.
    If you are not experiencing this issue any longer,  May you let me know, your time and courtesy,
    will be deeply appreciated.
    Regards;
    RobertoR
    remember ==▼
    You can say THANKS by clicking the KUDOS STAR. If my suggestion resolves your issue Mark as a "SOLUTION" this way others can benefit Thanks in Advance!

  • My HP photosmart 2610 all in one will print by not allow me to save or send a scan

    My HP Photosmart 2610 all in one will scan but will not allow me to save the scan or email the scan.  i assume it is a bug with maverick.....which i recently downloaded

    Does this thread help?
    http://h30434.www3.hp.com/t5/Mac-Printing-and-Scanning/OS-X-10-9-Mavericks-Incor rect-output-using-HP-Scan/td-p/3069079

  • HP PSC 2410 All-In-One - use in Windows 7 64-bit environment

    Hi,
    I have had this HP PSC 2410 All-In-One printer for some years now and it has worked pretty flawlessly in a Windows XP Pro SP3 environment for that time.
    Some months ago, I purchased a new computer system and went to the Windows 7 64-bit OS (not interersted in Windows 8 at all) and whilst I have installed the printer successfully and it works, the software suite that came with the printer on the CD will not install for this environment and therefore I no longer have access to the various Maintenance Options that were available under the Windows XP Pro OS, such as the cleaning and Fax options.
    Searching for something for the Windows 7 64-bit OS threw up two options - the driver update and the utilities tool wizard.   After going down the driver update route, no software suite was available and in fact the update stated that the driver was installed by Windows 7 automatically.  That seems to be the case as the printer works fine in print mode, scan mode (from the desktop menu) and it detects SD cards through the slots.
    However, there is no software to allow me to fax or clean or do any of the other options available under the HP Suite that came on the CD.
    Going down the Utility route got me downloading a file - HPPIW.EXE - that would look at my current printer installation and check with HP for any updates.   After many attempts, the utility simply CANNOT find my printer even though it is installed, works properly and even windows sees it!   No amount of recycling the ON/OFF button or rebooting the computer allows this utility to detect the printer at all.  It is installed via USB on the Windows 7 64-bit Family PC and windows updates are always fully updated.
    I am currently considering the purchase of a new HP OfficeJet 8600 Pro Plus to use as the family printer with the Windows 7 system - and move this HP PSC 2410 upstairs to connect it directly to my Windows XP Pro SP3 personal desktop and use the original CD to install it.  My Canon IP4200 Pixma has just died on my personal PC upstairs.
    However, until I do that, is there any of the Software Suite available that would work in the Windows 7 environment that would allow me to use the various functions such as Fax and cleaning that were available under the old XP environment and obtained via the CD?  Was the Suite of software ever updated for Windows 7?
    Thank you,
    Lee James
    West Sussex UK
    This question was solved.
    View Solution.

    Hi BAW9DV,
    I hate to hear you are having issues.  While there will not is not a specific software utility that will complete the tasks desired, maintenance can be completed from the front panel of the unit.  Windows also has an application for faxing from the computer as well that may work with this device. Please see the information below that may enable the functions desired. 
    Faxing:
    1. Use Windows Fax and Scan
       A. Type Windows Fax and Scan into search box
       B. Configure fax machine for use.  Click Here to view Microsoft documentation for use.  Note: This is a 3rd party website. HP and I are not responsible for content of this site.
       C. Select New Fax
    Maintenance tasks from front panel:
    Running the Clean Print Cartridges Utility Click Here
    Printing setf-test page Click Here
    Evaluate test page Click Here
    Align the Cartridges: Press setup-Press 5, then press 2
    If you the work around options are not acceptable the 8600 model would most certainly meet your needs when compared with this unit.  However I encourage you to contact HP to see what upgrade options are available for this unit. It will most likely be another Photosmart model/type unit, but in many cases upgrades are offered at a discounted rate to our valued out of warranty customers.  Global contact information can be accessed Here. 
    P.S.  If you upgrade through technical support, be sure to ask about carepacks.  Extended warranties may also be available at a discounted rate for upgrading. 
    Hope this helps!
    Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
    Please select the "Accept as Solution" button on the post that best answers your question.
    I appreciate your input !
    Thank You,
    I work for HP.

  • HT4356 I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1).  For some unknown reason neither one can now print.  I keep getting a message that the printer is no longer avail

    I previously was able to wirelessly ePrint to my HP Photosmart Plus e-All-In-One B210a using both my iPad & iPhone (both run IOS 5.1).  For some unknown reason neither one can now print.  I keep getting a message that the printer is no longer available.  My MacBook continues to print ok.  Any ideas?

    Reboot everything.  Router, printer and pad.  If it used to work, it will again.  It just lost itself somewhere.

  • Paper Jam for HP PSC 1610 All-in-One Printer

    Paper Jam for HP PSC 1610 All-in-One Printer:
    I had a paper jam and cleared the paper from the printer.  Now every time I turn the printer "on" it picks up the top piece of paper from the tray and runs it about ½  to ¾ of the way thru the paper feed, stops, and then displays message "paper jam clear paper and then press OK".  When I do that it simply picks up the next piece of paper off the tray and does the message again.  If I push the OK button on the printer it will simply finish the ejection and then pick up the next paper from the tray, and do the same thing.  I have examined the interior (and exterior) of the printer for paper scraps and  any other obvious sign of trouble (dirty drive wheels, missing rollers, broken springs, etc...) and can not see anything unusual. I can not print a test print because of the paper jam message.  I am running Windows XP and the printer has been working fine for months (until this recent jam).  I did all the steps from the HP fix it site including clean rollers, plug and unplugged,  carriage travel OK and more. Don't know what to do now........Any help would be great!!!!   Thank you!

    Hi my printer psc 1610 hp not picking paper

  • Hp psc 1315 all-in-one printer

    I have installed a hp psc 1315 all in one printer on my new Mac OS X version 10.9.5.
    While I can print without any problems, I don't have access to scan a document from the printer to my computer.
    Can anyone help with this?
    Thank you.

    Hello @annlf 
    Welcome to the HP Community!
    I hope to help you with the scanning concern you have today.
    Unfortunately, you will not be able to scan using HP software with your PSC 1315 (older model), on Mavericks (newer OS X), as there is no Full Feature driver (includes scanning software) available.
    However, you do have some other options to scan. See this link for your options. Scroll down when the guide loads and select "How do I scan with the driver from Apple Software Update?"
    OS X v10.9 Mavericks: Installing and Using the Printer on a Mac
    Have a wonderful Wednesday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Maybe you are looking for