HP ProOne 400 Wired Connection

I recently got an all-in-one PC, the ProOne 400. I would like to have a wired connection but when opening the network and sharing centre, there is only wireless connections available.
I have a wired cable plugged in directly from the PC to my router and it doesn't seem to be showing up. I have tried disconnecting the wireless connection but then there's just no internet connection being picked up.
Any assistance in the matter would be appreciated, Thanks!

Hi,
Do you have 2 network connections Wifi and the LAN (Realtek PCIe GBE)?
Ifso Does the LAN (Realtek PCIe GBE) show that a cable is connected or does it have a cross on it when an actual cable is plugged in?
In Control Panel ->  Network and Internet -> View network status and tasks -> Change adapter settings. do you have 2 network connections Wifi and the LAN (Realtek PCIe GBE)
ps. What OS is it running (is: WIndows 7 or Windows 8)
Charles
Independent Computer Technician

Similar Messages

  • I am using IMovie 11 with a new iMac.  Unable to import video from a Panasonic PV-GS400 mini-DV camcorder using a Firewire IEEE 1394 400 cable connected to a Firewire 400 to 800 adapter which is then connected to a Thunderbolt to Firewire 800 adapter.

    How can I get iMovie to recognize my Panasonic PV-GS400 as a device so I can import video to my iMac?  I have a FireWire IEEE 1394 400 cable connected to the camcorder.  Since my new iMac has only Thunderbolt ports, I purchased a Firewire 400 to 800 adapter to connect to the cable.  I also purchased a FireWire 800 to Thunderbolt adapter to connect to the computer.  My camcarder is still not recognized.

    I would suggest that you try a 9 pin to 4 pin Firewire Cable along with the Firewire to Thunderbolt adapter.
    Those Firewire 400 to 800 adapters do not seem to work well with iMovie.
    The 9 pin to 4 pin cables are available at reasonable prices here, for example.
    http://www.monoprice.com/products/product.asp?c_id=103&cp_id=10301&cs_id=1030104 &p_id=3541&seq=1&format=2

  • Wired connection doesn't work if cable is not plugged in at boot time

    Hey all,
    I started using arch a few days ago and I simply love it, but I have a problem. The wired connection doesn't work if the cable is not plugged in at boot time, or if it was plugged in at boot time, then plugged out and in again. Switching it off and on again via the gui has the same effect. I am using NetworkManager with dhcpcd, NetworkManager is started via systemd, dhcpcd is not, I let NetworkManager do that. When I started investigating this problem there were some remnants of netctl, but now NetworkManager is the only networking-related service started at boot time. When the cable is plugged back in, NM-applet shows that it's connected, and an IP address is assigned, but the connection doesn't work.
    Here's some information regarding the system:
    It's a lenovo G50-70 laptop, it uses the r8169 driver for ethernet. (I dualboot it with windows 8.1, but arch is default and all this stuff happens also if i only use arch)
    The router is a Linksys EA2700/N600
    journalctl -u NetworkManager
    aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> NetworkManager (version 0.9.10.1) is starting...
    aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> Read config: /etc/NetworkManager/NetworkManager.conf
    aug 26 19:14:33 arch_daboka NetworkManager[527]: <info> WEXT support is enabled
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> Loaded plugin keyfile: (c) 2007 - 2013 Red Hat, Inc. To report bugs please use the NetworkMan
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/Bokros
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/1. vezetékes kapcsolat
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> new connection /etc/NetworkManager/system-connections/UPC1838142
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> monitoring kernel firmware directory '/usr/lib/firmware'.
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill0: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1c.3/0000:02:00.0/iee
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> rfkill1: found WiFi radio killswitch (at /sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC20
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WiFi hardware radio set enabled
    aug 26 19:14:35 arch_daboka NetworkManager[527]: <info> WWAN hardware radio set enabled
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wifi.so
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-wwan.so
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-adsl.so
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Loaded device plugin: /usr/lib/NetworkManager/libnm-device-plugin-bluetooth.so
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiFi enabled by radio killswitch; enabled by state file
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WWAN enabled by radio killswitch; enabled by state file
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> WiMAX enabled by radio killswitch; enabled by state file
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> Networking is enabled by state file
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): link connected
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): carrier is ON
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): new Generic device (driver: 'unknown' ifindex: 1)
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (lo): exported as /org/freedesktop/NetworkManager/Devices/0
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): carrier is OFF
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): new Ethernet device (driver: 'r8169' ifindex: 2)
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): exported as /org/freedesktop/NetworkManager/Devices/1
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    aug 26 19:14:36 arch_daboka systemd[1]: Started Network Manager.
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (enp1s0): preparing device
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): using nl80211 for WiFi device control
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): driver supports Access Point (AP) mode
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): new 802.11 WiFi device (driver: 'ath9k' ifindex: 3)
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): exported as /org/freedesktop/NetworkManager/Devices/2
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> (wlp2s0): preparing device
    aug 26 19:14:36 arch_daboka NetworkManager[527]: <info> use BlueZ version 5
    aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> wpa_supplicant started
    aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
    aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: starting -> ready
    aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: unavailable -> disconnected (reason 'supplicant-available') [20
    aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: ready -> disconnected
    aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0) supports 4 scan SSIDs
    aug 26 19:14:37 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: disconnected -> inactive
    aug 26 19:14:42 arch_daboka NetworkManager[527]: <info> startup complete
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Auto-activating connection 'Bokros'.
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) starting connection 'Bokros'
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) scheduled...
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) started...
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTING
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) scheduled...
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 1 of 5 (Device Prepare) complete.
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) starting...
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: prepare -> config (reason 'none') [40 50 0]
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless): connection 'Bokros' has security, and secrets exist. No new sec
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'ssid' value 'Bokros'
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'scan_ssid' value '1'
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: added 'psk' value '<omitted>'
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 2 of 5 (Device Configure) complete.
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> Config: set interface ap_scan to 1
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: inactive -> authenticating
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: authenticating -> associated
    aug 26 19:15:00 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: associated -> 4-way handshake
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): supplicant interface state: 4-way handshake -> completed
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireles
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) scheduled.
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) started...
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: config -> ip-config (reason 'none') [50 70 0]
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 3599
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 3 of 5 (IP Configure Start) complete.
    aug 26 19:15:01 arch_daboka dhcpcd[3599]: version 6.4.3 starting
    aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: version 6.4.3 starting
    aug 26 19:15:01 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed nbi -> preinit
    aug 26 19:15:01 arch_daboka dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
    aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
    aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
    aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: IAID 65:59:c9:b5
    aug 26 19:15:01 arch_daboka dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
    aug 26 19:15:01 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: soliciting an IPv6 router
    aug 26 19:15:02 arch_daboka dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
    aug 26 19:15:02 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: rebinding lease of 192.168.1.137
    aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
    aug 26 19:15:07 arch_daboka dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
    aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: leased 192.168.1.137 for 86400 seconds
    aug 26 19:15:07 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: adding route to 192.168.1.0/24
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): DHCPv4 state changed preinit -> reboot
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> address 192.168.1.137
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> lease time 86400
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) started...
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) Stage 5 of 5 (IPv4 Commit) complete.
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> (wlp2s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Policy set 'Bokros' (wlp2s0) as default for IPv4 routing and DNS.
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
    aug 26 19:15:07 arch_daboka NetworkManager[527]: <info> Activation (wlp2s0) successful, device activated.
    aug 26 19:15:14 arch_daboka dhcpcd[3599]: wlp2s0: no IPv6 Routers available
    aug 26 19:15:14 arch_daboka NetworkManager[527]: dhcpcd[3599]: wlp2s0: no IPv6 Routers available
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): link connected
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: unavailable -> disconnected (reason 'carrier-changed') [20 30 4
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Auto-activating connection '1. vezetékes kapcsolat'.
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) starting connection '1. vezetékes kapcsolat'
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) scheduled...
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) started...
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) scheduled...
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 1 of 5 (Device Prepare) complete.
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) starting...
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: prepare -> config (reason 'none') [40 50 0]
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) successful.
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) scheduled.
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 2 of 5 (Device Configure) complete.
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) started...
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: config -> ip-config (reason 'none') [50 70 0]
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Beginning DHCPv4 transaction (timeout in 45 seconds)
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> dhcpcd started with pid 4322
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 3 of 5 (IP Configure Start) complete.
    aug 26 19:15:34 arch_daboka dhcpcd[4322]: version 6.4.3 starting
    aug 26 19:15:34 arch_daboka dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
    aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
    aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: version 6.4.3 starting
    aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: DUID 00:01:00:01:1b:7c:0d:d6:28:d2:44:7f:89:66
    aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: IAID 44:7f:89:66
    aug 26 19:15:34 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed nbi -> preinit
    aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: soliciting an IPv6 router
    aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: soliciting an IPv6 router
    aug 26 19:15:34 arch_daboka dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
    aug 26 19:15:34 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: rebinding lease of 192.168.1.138
    aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
    aug 26 19:15:39 arch_daboka dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
    aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: leased 192.168.1.138 for 86400 seconds
    aug 26 19:15:39 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: adding route to 192.168.1.0/24
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): DHCPv4 state changed preinit -> reboot
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> address 192.168.1.138
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> plen 24 (255.255.255.0)
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> gateway 192.168.1.1
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> server identifier 192.168.1.1
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> lease time 86400
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> hostname 'arch_daboka'
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> nameserver '192.168.1.1'
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> domain name 'chello.hu'
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Configure Commit) scheduled...
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) started...
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-config -> ip-check (reason 'none') [70 80 0]
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) Stage 5 of 5 (IPv4 Commit) complete.
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
    aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_GLOBAL
    aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Policy set '1. vezetékes kapcsolat' (enp1s0) as default for IPv4 routing and DNS.
    aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Writing DNS information to /usr/bin/resolvconf
    aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> Activation (enp1s0) successful, device activated.
    aug 26 19:15:47 arch_daboka dhcpcd[4322]: enp1s0: no IPv6 Routers available
    aug 26 19:15:47 arch_daboka NetworkManager[527]: dhcpcd[4322]: enp1s0: no IPv6 Routers available
    ping -c 10 192.168.1.1
    PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
    64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=4.38 ms
    64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=2.79 ms
    64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=4.89 ms
    64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=5.30 ms
    64 bytes from 192.168.1.1: icmp_seq=5 ttl=64 time=1.59 ms
    64 bytes from 192.168.1.1: icmp_seq=6 ttl=64 time=1.61 ms
    64 bytes from 192.168.1.1: icmp_seq=7 ttl=64 time=4.37 ms
    64 bytes from 192.168.1.1: icmp_seq=8 ttl=64 time=2.40 ms
    64 bytes from 192.168.1.1: icmp_seq=9 ttl=64 time=6.47 ms
    --- 192.168.1.1 ping statistics ---
    10 packets transmitted, 9 received, 10% packet loss, time 9014ms
    rtt min/avg/max/mdev = 1.599/3.759/6.471/1.627 ms
    ping -c 100 8.8.8.8 - it's not completely disconnected, but it's always 8 packets at once that are received
    PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
    64 bytes from 8.8.8.8: icmp_seq=20 ttl=46 time=41.7 ms
    64 bytes from 8.8.8.8: icmp_seq=21 ttl=46 time=40.0 ms
    64 bytes from 8.8.8.8: icmp_seq=22 ttl=46 time=38.8 ms
    64 bytes from 8.8.8.8: icmp_seq=23 ttl=46 time=39.3 ms
    64 bytes from 8.8.8.8: icmp_seq=24 ttl=46 time=41.8 ms
    64 bytes from 8.8.8.8: icmp_seq=25 ttl=46 time=38.4 ms
    64 bytes from 8.8.8.8: icmp_seq=26 ttl=46 time=38.4 ms
    64 bytes from 8.8.8.8: icmp_seq=27 ttl=46 time=38.0 ms
    64 bytes from 8.8.8.8: icmp_seq=56 ttl=46 time=43.4 ms
    64 bytes from 8.8.8.8: icmp_seq=57 ttl=46 time=49.8 ms
    64 bytes from 8.8.8.8: icmp_seq=58 ttl=46 time=40.2 ms
    64 bytes from 8.8.8.8: icmp_seq=59 ttl=46 time=44.3 ms
    64 bytes from 8.8.8.8: icmp_seq=60 ttl=46 time=38.5 ms
    64 bytes from 8.8.8.8: icmp_seq=61 ttl=46 time=43.4 ms
    64 bytes from 8.8.8.8: icmp_seq=62 ttl=46 time=39.2 ms
    64 bytes from 8.8.8.8: icmp_seq=63 ttl=46 time=40.5 ms
    64 bytes from 8.8.8.8: icmp_seq=92 ttl=46 time=38.3 ms
    64 bytes from 8.8.8.8: icmp_seq=93 ttl=46 time=43.7 ms
    64 bytes from 8.8.8.8: icmp_seq=94 ttl=46 time=42.3 ms
    64 bytes from 8.8.8.8: icmp_seq=95 ttl=46 time=46.6 ms
    64 bytes from 8.8.8.8: icmp_seq=96 ttl=46 time=44.9 ms
    64 bytes from 8.8.8.8: icmp_seq=97 ttl=46 time=42.9 ms
    64 bytes from 8.8.8.8: icmp_seq=98 ttl=46 time=41.7 ms
    64 bytes from 8.8.8.8: icmp_seq=99 ttl=46 time=37.8 ms
    --- 8.8.8.8 ping statistics ---
    100 packets transmitted, 24 received, 76% packet loss, time 99062ms
    rtt min/avg/max/mdev = 37.886/41.455/49.829/3.000 ms
    cat /etc/dhcpcd.conf - I tried clientid instead of duid and disabling IPv6, but neither of those helped.
    # A sample configuration for dhcpcd.
    # See dhcpcd.conf(5) for details.
    # Inform the DHCP server of our hostname for DDNS.
    hostname
    # Use the hardware address of the interface for the Client ID.
    #clientid
    # or
    # Use the same DUID + IAID as set in DHCPv6 for DHCPv4 ClientID as per RFC4361.
    duid
    # Persist interface configuration when dhcpcd exits.
    persistent
    # Rapid commit support.
    # Safe to enable by default because it requires the equivalent option set
    # on the server to actually work.
    option rapid_commit
    # A list of options to request from the DHCP server.
    option domain_name_servers, domain_name, domain_search, host_name
    option classless_static_routes
    # Most distributions have NTP support.
    option ntp_servers
    # Respect the network MTU.
    # Some interface drivers reset when changing the MTU so disabled by default.
    #option interface_mtu
    # A ServerID is required by RFC2131.
    require dhcp_server_identifier
    # Generate Stable Private IPv6 Addresses instead of hardware based ones
    slaac private
    # A hook script is provided to lookup the hostname if not set by the DHCP
    # server, but it should not be run by default.
    nohook lookup-hostname
    #noipv4ll
    #Disable IPv6
    #noipv6rs
    #noipv6
    cat /etc/NetworkManager/NetworkManager.conf
    [main]
    plugins=keyfile
    dhcp=dhcpcd
    ## Set static hostname
    #[keyfile]
    #hostname=foobar
    ## HTTP-based connectivity check
    #[connectivity]
    #uri=http://nmcheck.gnome.org/check_network_status.txt
    I couldn't find anything else to append, but if there are other log or conf files or anything else, which would help solving the problem, I should put here, please tell me.

    Try to use dhclient perhaps?  Might I also suggest letting systemd deal with the dhcp issue and not NM.  That may seem incongruous but it is possible NM is mis-handling the dhcp hand-off to the network card.  I'm no guru but I got thinking about this when I saw this in your output:
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: ip-check -> secondaries (reason 'none') [80 90 0]
    aug 26 19:15:39 arch_daboka NetworkManager[527]: <info> (enp1s0): device state change: secondaries -> activated (reason 'none') [90 100 0]
    aug 26 19:15:40 arch_daboka NetworkManager[527]: <info> NetworkManager state is now CONNECTED_LOCAL
    It is very possible that I'm mis-interpreting this information so please take it with a boulder of salt. 

  • Can I use the Airport Express to connect to a Linksys Wireless Network and then use the Ethernet port on the Airport for a wired connection to a device for internet access?  Would I be able to then also use that Ethernet pt to a Ntwk Hub for more wired c

    Thanks for the help.  Looked but not clear on what I am trying to do as being possible.  Can I use an Airport Express to connect wireless to a Linksys Wireless Router, such that I can then use the Ethernet ports on the Airport to either connected to a PC wired, or even use a hub off the Airport Express to allow multiple wired connections to it? 
    I am not looking to have the Airport Express extend my wireless network, just connect to it and provide me wired connections in a different location from where my Linksys Route is located.  Would prefer to replace Linksys with all Apple, but just not possible financially yet.  Thanks for the help.

    If the AirPort Express Base Station (AX) is an 802.11n model, then yes, you can reconfigure it as a wireless Ethernet bridge. In this configuration, the AX would join the wireless network provided by the Linksys router and its Ethernet port would be enabled for either a single wired device or for an Ethernet hub or switch for multiple devices.

  • How do I disconnect from Wireless to use wired connection?

    Hi - I'm new to this and I apologize if this question is ridiculously easy.
    I am using a cable modem in which I have plugged my WRT160Nv2 wireless router. I am supporting three computers here in my home; my laptop (both wired and wireless), my daughters laptop (wireless only), and my desktop (wired only).
    Everything works great and I have to give all the credit to CISCO and the excellent software which automatically solves every connection problem that comes up.
    My laptop and desktop are connected to the wireless router via cable.
    My question is strictly about my laptop. When I leave my office in the house and go into another room, I establish the wireless connection. Now I am back in my home office room, I want to use my wired connection. How do I do this? Do I need to disable my wireless connection so that my wired connection takes over? Again, I do have my laptop connected to the wireless router via cat5.
    I want to do this strictly for the speed of the connection. I've read that a wired connection is double if not more in Mbps.
    This laptop is running Win XP Pro, SP3.
    I hope this furnishes enough info to assist in an answer.
    Thanks in advance.
    John
    P.S.. I really do want to educate myself regarding the equipment I am using and not have to ask such basic questions. Are there any books or websites you can recommend that can start me out and go as technical as I choose to?

    Windows by default uses the fastest connection possible. If you have a wireless and wired connection active at the same time it depends on how fast both connections are rated. Wireless connections tend to change depending on the distance. Wireless 802.11g goes up to 54 Mbit/s. Wireless 802.11n can go up to some 300 Mbit/s. Wired connections are usually either gigabit ethernet (1000 Mbit/s) or fastethernet (100 Mbit/s).
    Thus, which is picked depends on your computer. You should check the connection status of both connections in the network connections control panel. It shows you the current wireless and wired speed (the latter won't change of course). Very often, the wired connection is preferred to the wireless connection. Now with 802.11n connections the wireless connection is preferred if your wired connection is only fastethernet.
    As your WRT160Nv2 has only FastEthernet LAN ports you have to check how fast the wireless connection is. If you have a 802.11n wireless adapter in your laptop it may show up the wireless connection faster then 100 Mbit/s. Depending on the setting it may change occassionally between 54 Mbit/s and speeds higher then 100 Mbit/s which would lead Windows to swap connections. If you see that problem it is better to switch off the wireless in the laptop while you have a wired connection...
    A wired connection is more reliable and stable then a wireless connection. With wireless you can have interference. Thus, even though a wired connection may be slower then a wireless one you may prefer to use the wired connection anyway. And some people prefer to turn off the wireless to avoid radiation.
    To sum up: usually you don't have to switch off the wireless, unless you experience problems because of the mentioned changing speeds of the wireless connection. The computer will always only use one connection. Not both.

  • How can i get an xbox 360 to connect to my time capsule via WIRED connection?

    I have a Time Capsule and i need to connect my xbox 360 to it because my stepdad has the network in this house set up crazily. He gets mad if i ask him to change anything because it is how he wants it and it works with EVERYTHING ELSE. I do not have a wireless adapter so i need to connect the xbox to my time capsule via a wired connection
    Thanks =]

    Here is what I would look into.
    Use iCloud and photo stream to upload pictures taken with the iPad.
    Find a remote log in utility, or web based app to then remote to your computer.
    Download the files from photo stream to your time capsule.
    As far as recommending a remote log in utility. I have not experience in that area and would need to do research my self.

  • Wired Connection Set Up

    Just bought an Apple TV and want to set it up via a wired connection.  I have my PC connected directly to my modem so do I have to also connect my ATV directly to my modem OR can I connect it to my PC. Thanks in advance guys, any help with this will be very much appreciated

    You'd connect it to the modem via ethernet (or wifi).
    If your PC had a spare ethernet port you could connect but would end up having to configure things like internet sharing, and the PC woudl need to be always on for internet access on AppleTV.
    It's designed to run standalone with internet content or to play local media from iTunes when PC running.
    AC

  • Can i set up a wired connection in another room?

    Hello BT community forums
    I am a BT customer using the BT homehub 2.0 connected to my main phone line.
    My question is: Downstairs I have the typical setup with my computer for wireless to my sons bedroom in the newly built extentions but the wireless connection is poor and disconnects often. This extentions bedroom has a phoneline in aswell with a fully working BT homephone, would I be able to set up a wired connection to the computer in the extention bedroom using this phoneline so we can have a wired connection to my sons computer?
    If any other information is required please ask and I will provide.
    Thank you for any help and advice provided.

    No you can't use the phone line to provide an Ethernet connection to your Son's computer. Also, you can't have two Routers on the same Telephone Line. Some options are:
    Move the BT HH to a position nearer your Son's room
    Use a pair of Powerline Ethernet adapters to provide Ethernet connection ove your Mains wiring
    Run an Ethernet Cat5 cable from the Router to your Son's room
    Set up a Wireless "repeater" using WDS http://en.wikipedia.org/wiki/Wireless_Distribution​_System
    Is there a good reason why the Wireless performance is so poor? How far is the computer from the Router and how many/ what construction are the intervening walls?
    Is it possible that there is another Wireless signal interfering with yours? Have you tried changing Wireless Channel?
    "Insanity: doing the same thing over and over again and expecting different results." - Albert Einstein

  • No longer able to use Express to extend wired connection

    I have an airport extreme base station connected to a cable modem.
    I have for some time used an airport express to make a wired connection to my xbox in another room.
    Something happened the other night and I had to reset both the extreme and the express and set them up again.
    But now, my express will no longer allow a wired connection to the xbox or even another Mac.
    Everything is up-to-date software and firmware-wise. The airport extreme base station is feeding all the wireless computers in my house just fine.
    The wired (ethernet cable) from my airport extreme base station to a computer works just fine as well.
    Airplay works on the Express.
    This is my configuration:
    [Cable-Modem]--------[Airport Extreme Base Station] )))))))))))))))))))  [Airport Express]---------xbox  DOESN'T WORK
    [Cable-Modem]--------[Airport Extreme Base Station] ))))))))))))))))))) [Computer] WORKS FINE
    [Cable-Modem]--------[Airport Extreme Base Station] )))))))))))))))))))  [Airport Express]---------[Computer]  DOESN'T WORK
    [Cable-Modem]--------[Airport Extreme Base Station] )))))))))))))))))))  [Airport Express]---------Stereo via Airplay WORKS FINE
    [Cable-Modem]--------[Airport Extreme Base Station]---------xbox  WORKS but AEBS is not normally in the same room as xbox & TV.
    Any thoughts on why this is suddenly not working?
    I have the box checked for Allow this network to be extended on the AEBS Under the Wireless tab
    The Express is set up to join the AEBS and it has a green light.
    Thanks,
    Paul

    The sole reason for the AX is to get an internet connection to the xbox. It's too far away from the AEBS to run an ethernet cord.
    What's screwy is that it all worked before. It's not like I am trying a new configuration.
    I'm going to go back to step one on both the AEBS and AX one more time today. Make sure that I didn't miss a step.
    BTW, I originally got the MSxbox wireless connector. After a few months use, it failed. I foolishly went ahead and got a second one. It lasted about 9 months. Piece of MS&$t!

  • Apple Airprint to HP Officejet 6500A Plus via Wired Connection to Router

    Hi There,
    So I've done a considerable amount of research into this across the internet and this forum and I'm still struggling to find a satisfactory solution.
    I have an HP Officejet 6500A Plus connected by ethernet into my BT Homehub 3.
    It is my understanding that even though this is a wired connection, as long as my iOS device (iPad 2 or iPhone 5) is connected to the same router, I should still be able to see this Officejet over through the airprint facility.
    Unfortunately this is not the case. I only get the "No Airprint Printers Found" message on both devices. The only way I have managed to get my Mac Pro (Mavericks) to connect was to mannualy add using the IP address for the printer.
    Can anyone give any guidance as to what I might be doing wrong? The printer is definitely connecting to the internet as I can print from my iOS devices using HP ePrint app for iOS.
    Some might say well what is the problem, just use the HP app but this is not point. I believe if something has been implemented to make things easier then use it. I chose this printer specifically for this functionality so it's a little frustrating to find it so difficult to achieve the desired results.
    Hope it's something straightforward and someone can help.
    Thanks,
    Steve
    This question was solved.
    View Solution.

    Further to this request, and reading many more similar issues, I think I may resolved this.
    I am not 100% sure but I have read some threads suggesting there are issues around BT's Homehub 3 and bonjour so this may be an issue.
    I have tried the following over the past couple of days...
    1) Completely reset my router (wiped all settings and started again) - No luck!
    2) Tried changing from WPA2 to just WPA security - No luck!
    3) Tried forwarding the bonjour ports to the printer - No luck!
    4) Switched off router, printer and all iOS devices then powered back router, printer and then iOS devices - Printer appears on iOS devices but when print was selected, iOS device repeatedly returned Printer Not Connected error.
    Finally, what seems to have done it (at least for now) was...
    1) Unplugged ethernet from the Officejet and set it up as Wireless connection.
    2) Powered down router, printer and all iOS devices then powered back up in the order stated earlier.
    3) So far I have tried printing an email and a web page from my iOS devices and both have been sucessful.
    Incidentally I had been struggling also to airplay from my iPhone and iPad until I started messing around with settings above and now this issue also seems to be resolved.
    Due to variety of combinations (different printers, routers etc) people will have, it seems to be quite difficult to find a solution which addresses an individual problem however I hope some of my experimenting and findings might help others in some way.

  • Wired Connection problem on Officejet Pro 8500 a909a

    I am having what seems to be to be a strange problem.
    I have lost connectivity to my printer (Officejet Pro 8500 a909a) through the network from my Windows 7 64bit computer.  I found that it worked fine if I connect throught he USB port.  Today, I have been trying to get back to being able to use it through the network.
    I am able to get to the configuration on the printer through the network, at http://192.168.0.105 and that works fine.
    I have downloaded the most recent software and when I run it, it doesn't detect the printer, even if I enter the ip address in the advanced search box.
    I have downloaded the HP Print and Scan Doctor, and when it runs, I can see the printer, however i'm not sure why it shows 2 lines:
    When I choose the last line and press next, all it does is goes to this page:
    Your help is appreciated.

    What operating system does the computer use?
    What happens when you choose the network-wired option on that last screen?  Since the printer is already installed, the software thinks you are wanting to install the printer again and presents the last screen.
    Your printer is listed twice with two separate IP addresses.  I suspect the issue may be that the IP address is changing to frequently for the detection protocol to keep up with it.
    If the printer is on the network and you can access it by entering the printer's IP address in a web browser, you can try setting a static IP address for the wired connection.  Click on the Printer Does Not Maintain Wireless Connection document from HP.  The document is for wireless connections, but the same steps can be applied for a wired connection by substituting wired for any section that designates going to the wireless section of the printer.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • HP Color LaserJet CP2025dn Printer Wired Connectivity and have USB simultaneously?

    Hello to all;
    Thank you in advance.
    I have a HP Color LaserJet CP2025dn Printer. 
    The question, can I use ethernet connection and have USB simultaneously?  Ethernet is faster, right?
    Currently, I have the printer connected to network via Ethernet Wired Connectivity through an Apple Aiirport Extreme base station.  I have several Mac's all operating under 10.9.1, and two PC's (one is WIN XP, and the other WIN 8.1), which all operate fine with 2008 wired/wireless technology. I know what a dinosour. I am in the process of upgrading the household to current wireless technology with a NetGear AC1900 Nighthawk Smart WiFi Router (Model: R7000), 802.11ac Dual Band Gigabit, with two USB ports ((1) 2.0 and (1) 3.0) . I connected the printer directly into the Netgrar router, and it wouldn't print, ran setup through the Mac and Win computers and still wouldnt pring. One of the reasons that sold me on the Netgear router was the ReadySHARE® USB access—Wirelessly access & share. In order for me to utilize the ReadySHARE® feature is to connect via a USB cable.  Sob story, the longest USB cable off the shelf usually 16",  and to reach where the printer is now, I need @25-28 feet of cable. Is ther a maximum length of USB that I can use with out suffering loss of speed/functionality?
    Again thank you for your time

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
    Here is the HP Color LaserJet CP2025 Printer series Support page.
    I hope this helps.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Force Win 8 to use wired connection

    Hi Folks,
    I'm running Win8 on an Acer Desktop.  I have cable internet from Comcast, with the modem running thru a router, then to the pc. 
    I want to be able to use the wired connection for the desktop access to the internet, and use the wireless ONLY for the other devices in the house, i.e., laptop in another room, blu-ray player, printer.  However, no matter what I do, the desktop uses
    the [much slower!] wireless connection, rather than the wired one.
    I've hunted on the net for a solution, but nothing I've found works.  Anyone have a solution?
    Thanks.

    Thanks for the suggestions.  Unhappily, when I open Network Connections and Advanced Settings, the first item shown in your screen shot, "vEthernet (VNIC)," is not there.  The other three are shown, just as in your screen shot, but vEthernet (VNIC)
    is absent.
    I bypassed the router and connected directly to the pc from the modem, and my speeds are 3 or 4 times faster.  Of course, I then no longer have wireless connections for my other devices. 
    While I had the pc directly connected to the modem, I checked the Network Connections again, but "vEthernet (VNIC) was still not on the list.
    Any ideas?  I'd really like to make this work, and I can't understand why the pc, having a wired connection, insists on connecting wirelessly.

  • Windows 8.1 wired connection problem

    My computer with Windows 8.1 started to lose internet connection very often (about every minute). I tried to update drivers for network card, even bought new network card with no result. Also, tried to connect directly without router and connection
    still drops. Network troubleshooting did not find any problems, no errors are displaying. What may be causing the problem?

    Hi,
    Wired connection, have you checked the cable? Please make sure that it's functioning fine.
    You can also test the connection with another PC to find out whether the culprit is your own PC or the ISP.
    Yolanda Zhu
    TechNet Community Support

  • I recovered my back up via a wired connection. now Time Machine does not recognise older back ups wirelessly and wants to do a first back up

    I recovered a back up from my time machine via a wired connection after getting the 'white screen of death'. Now Time Machine does not recognise any back ups on the time machine when connected wirelessly and wants to do a first back up of the whole machine. How do I get my mac to recognise these older back ups? It connects to the wifi network the time machine creates fine, with the same name and password.

    I recommend the following.
    1. Reset the TC to factory.
    Universal Factory Reset.. any model TC or AE.
    Unplug your TC/AE from power or turn off at the power point.
    Hold in reset. and power the TC/AE back on..  all without releasing reset and keep holding in for about 10sec. (this is often difficult without a 2nd person or a 3rd arm).
    Release it when the status light flashes rapidly. If it doesn’t flash rapidly you have missed it and try again.
    Note..
    Be Gentle! Feel the switch click on. It has a positive feel..  add no more pressure after that.
    TC/AE will reboot after a couple of minutes with default factory settings and will wipe out previous configurations of the router.
    No files are deleted on the hard disk in a TC.. No reset of the TC deletes files.. to do that you use erase from the airport utility.
    2. Rename the TC to SMB standard.
    That means short names.. 2-20 characters but less than 10 is excellent. eg TCGenx (use number for x that is actual generation of the TC)
    No spaces.
    Pure alphanumeric. No apostrophe.
    3. Ensure IPv6 is set to link-local..
    Do the same thing for ethernet if that is used.
    4. Manually mount the TC disk in Finder.
    Use Go in the top menu.. connect to server.
    Type in
    AFP://TCname.local (where TCname is your new short name for the TC and local is default domain .. it helps using the domain I found).
    You will then find the computer either can or cannot find the network resource.. if it fails something else is wrong with the actual network and you will need to fix that.
    It will request the password if it is found.. password is public by default unless you changed it.. type in the password and check to keep it in your keychain.
    5. Delete current TM setup and redo it with the newly named TC.
    See A4 here. http://pondini.org/TM/Troubleshooting.html
    If your backups cannot be found, try B6 again, now that you actually know that the disk has been properly discovered.

Maybe you are looking for

  • What happened to this thread? -- LabVIEW poll "Features you would like to see in LabVIEW!"

    What happened to this thread? --> LabVIEW poll "Features you would like to see in LabVIEW!"

  • Strange System.out.print behavior inside a for loop

    I'm trying to create a simple ASCII progress bar in the console that would display like this: |--------------------------------------------| ============================More equal signs would appear as time goes on. At least this is what I want to ha

  • How to select a suitable hierarchy from business content ?

    Gurus, I am new to BW and need to extract some sales data from R/3 into BW. Sales department is structured as Sales region ---> Sales person. It's a two level hierarchy maintained in R/3. I need to extract this data and want to explore for any availa

  • Sound bar missing

    The sound bar on my music app has gone missing and there is no sound coming from the speakers. The ringtone is still working so this has definitely got to be a glitch. Are there any solutions?

  • Limit directory access in GWEB server

    Hello all, we are Using the gweb server to run our analysis web site, and found a security concern.  Our web system needs access to the cgi-bin directory and all its sub directories (20+) in order for the system to operate properly, but we have found