HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity

Recent Over The Air (OTA) update for Slate 21 Update
Link to thread discussion here, fix listed below -
ISSUE:
A previously applied HP Slate 21 Kit Kat Update (Android 4.4.2) over the air (OTA) update may have caused issues with audio quality or wireless LAN connectivity.
Audio Quality: Bass response will be poor. Audio will play but bass frequencies will be lacking.
WiFi Issue: 5 GHz band not functioning properly
Status:
A new update (17r25.1-011-11-WW) has been released over the air (OTA) to end users
Resolution:
Apply update 17r25.1-011-11-WW
If the user was previously on 17r25.1-010-10-WW then a Factory Reset should be performed to complete the resolution.
I work for HP, supporting the HP Experts who volunteer their time and technical knowledge to help others.

Pebbles65,
Thank you for visiting our English HP Support Forum. We are only able to reply to posts written in English. To insure a quick response it would be advisable to post your question in English. The following links are here to assist you if you prefer to post in the following Language Forum.
English: http://h30434.www3.hp.com
Spanish: http://h30467.www3.hp.com
French: http://h30478.www3.hp.com
Portuguese: http://h30487.www3.hp.com
German: http://h30492.www3.hp.com
Korean: http://h30491.www3.hp.com/t5/community/communitypage
Simplified Chinese: http://h30471.www3.hp.com/t5/community/communitypage
Cheers,
KarolB
I work for HP

Similar Messages

Any fix for audio jitter and skips?

My iMovie projects are coming out basically ok,except for the audio flutter and jitter. Any suggestions? Am using the latest version of the iLife suite and latest version of Mac OSX on a 17-in iMac. The movie is mainly just jpg still images, set to an imported mp3 soundtrack. The video is fine, but annoying skips and jumps in the audio that seem random. And they don't always jitter in the same place on each playback. I exported the project to iDVD and got same results. Is it my project -- or the Mac? -- david

Have you read Karl Petersen's thread:
http://discussions.apple.com/thread.jspa?threadID=534252
Lots of info there.

IOS update fix for the map app

So exactly how long do users have to wait for an update fix for the map app?

The maps included with the iPhone do not cost extra and do use the existing data plan.
AT&T Navigator (GPS) does cost an extra $9.95 (or so) per month.
Most other GPS apps have no monthly fee and use the GPS and, in some cases, the data plan on your phone.
I recommend either Navigon (takes a lot of storage room but maps are stored on the iPhone) or GPS Drive (reasonable price, has great features, maps come from the data path so requires a data signal but takes much less space).

FORD BLUETOOTH UPDATE - FIX for NO GSM SIGNAL

FORD BLUETOOTH UPDATE - FIX FOR NO GSM SIGNAL ON MAIN AUDIO SCREEN
Yes just upgraded my Ford Mondeo 10 plate, which has ford top of range audio with satnav (not Sony system) and worked first time !
Just follow instructions from link below
so happy it all works again
Here is the link below :- (BIG thanks to Shamu 35)
http://www.ford-mobile-connectivity.com/downloadsUpdates

Hi,
Yes, I have tried everything, first deleted iphone pairing from ford audio then deleted ford audio from iphone then repaied.
It does repair to the car audio as I can search phone book look at missed calls in or last calls out but no GSM signal icon which was in the bottom lefthand corner on the screen and when you make a call to the iphone the phone vibrates and the car audio lowers the radio volume but does not pass the call to the ford audio.
This all worked perfect on IOS 4.3.5 is there a downgrade for the iphone from 5 to 4.3.5 ?
I rang apple to ask this and was told no, basiclly go away !!! the phone is only 4 months old and worked until this upgrade, it must be the IOS 5 update as other people are all reporting bluetooth issues with car integration ?

Can't update Xcode – "You have updates available for other accounts" and other errors.

I have 2 Macs, a 2008 Mac Pro running 10.8.5 and a 2009 MacBook Pro running 10.9.0, soon to be downgraded to 10.8.5. I can't install the Xcode update on either Mac, and I can't update MacTracker on my Mac Pro, which suggests that no updates work at all.
When I try to update, it says "You have updates available for other accounts" and "Sign in to ________ to update applications for that account." I'm already signed into that account. I tried logging out, closing the App Store, and logging back in. Then I tried logging out of both the App Store and iTunes as per a fix I found online, and it gave me "Unknown error" once I tried to update.
Is there a fix for this or at least a regular .pkg I can just install? Honestly, it's easier to update stuff in Debian Linux than on OS X 10.8 and up now.

Please try each of the following steps you haven't already taken, until the issue is resolved. After each step, relaunch the App Store and try again.
1. Follow the instructions in this Apple Support article.
2. If any App Store purchases were made under a different Apple ID, or if the bundled iLife applications were accepted under a different ID, sign in to the App Store with that ID to update.
3. Alternatively, delete the probem applications and re-download them with the ID you're using now. If you haven't already purchased them with that ID, you'll have to do that first, because purchases can't be transferred from one account to another.
4. Select the Purchased tab in the App Store window. If you see an item in the list marked "You have 3 apps to accept," click Accept.
5. Triple-click anywhere in the line below on this page to select it:
/Library/Caches/com.apple.appstore/adoption.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window may open with a file selected. If it does, delete the selected file. You may be prompted for your login password.
Then repeat step 4.
6. Select
Store ▹ View My Account
from the App Store menu bar, then select View hidden purchases. If you're trying to update any hidden purchases, unhide them.
7. Launch iTunes and select
Store ▹ Authorize This Computer
from the menu bar.
8. If you've moved any App Store apps out of the Applications folder, or into a subfolder, put them back. Never move or copy those applications. If you have backup copies of the apps on another volume, unmount it and try to update again.
9. Contact Account and Billing Support.

Possible fix for errors 11503 and 50

Here's a possible fix for Error 11503 and for error 50.
It worked for me and hopefully it will work for you.
I believe this error is caused by the incomplete downloading of either an update to an app. In my case it was caused by closing the lid on my laptop when I was downloading app updates on a very slow internet connection in a hotel.
Anyway, here is what I did that fixed it completely.
Close iTunes.
Go to this folder : /iTunes/Mobile Applications/Downloads
You'll find tmp files there. Drag them out of this folder to a temporary folder on your desktop. The Downloads folder should now be empty.
Restart iTunes.
All should be fine.
If it is, delete the desktop folder with all the temp files.
If it's not, then I can't help further, but that's what worked for me.

Several possible causes from the info you gave
Battery level low - recharge it for at least 4 hours till the full charge sign displays (2 prong icon instead of lightning icon).
Time to Reset the iPod - Press the Menu and center Button for about 10 secs till the Apple logo comes ON, then let go of the buttons.
your hardisk is starting to give problems, hence the skipping and some song refuse to play. - Do a disk diagnostic - follow this post by tt2.
https://discussions.apple.com/message/17028567#17028567
If you have updated any sofware application in Windows, then follow this Apple support procedure
http://support.apple.com/kb/TS1539
Most likely you have to do all, as the iPod hardisk filesystem would have been corrupted, or else the iPod Reset would bring it to normal operation.
Good Luck!

FAQ: Tips/Fixs for clicks, pops and glitches in sound ca

I have come across this little article from the internet while surfing and thought it could be of some use posting it here. Follow the link below.
Tips/Fixs for clicks, pops and glitches in sound card
If after following the tips on this page you are still having troubles, then contact support or wait for other peers in the forum for further advise and suggestion.
This particular phrase that's quoted from the article which is very true.
"This is a HUGE topic and I have come across it many times. The hardest thing to do in tech support is to explain to someone that the fault is not to do with the audio card, but instead with the way the computer is setup or the fault of components in their system. Pcs are built to a budget and parts do suffer because of this."

I know this stuff is 3 months old but I just got mine and hadn't yet used the pin function so now I know.
I hope you are right Nancy that it will have updates, but I really doubt it. This is the norm for Microsoft when stuff they put out bombs. Dish Network had a DVR receiver many years ago that had Microsoft software installed and it was buggy to say the least. They updated it a few times but then abandon it. For a few years Microsoft wouldn't release the code to Dish Network to allow DN to fix the bugs. It was a real "Hate Microsoft" time for those users. DN had to put out their own coded DVR receivers and let the Microsoft ones die.
I think VZ made a deal with MS and removed the stuff MS wasn't supporting. Then VZ put them out without needing a data package to unload them.

HT1766 I loaded the software fix for face time and it wiped out my contacts and photos. can I restore them?

I loaded the software fix for face time and in loading the new software I lost all of my other content (WITHOUT ANY WARNING). This included my contacts, photos, music. The music I can restore and losing the contacts is an inconvenience, but losing the photos is devastating.
Any ideas?

What software fix for FaceTime? What software did you apply?
Did you backup your iPhone before you updated it with whatever update you applied as described in HT1766? If so, did you backup to iCloud or iTunes? Either way your data should be restorable from that backup.

[svn:bz-trunk] 10631: Proper fix for BLZ-343 and LCDS-1153.

Revision: 10631
Author:   [email protected]
Date:     2009-09-28 05:23:42 -0700 (Mon, 28 Sep 2009)
Log Message:
Proper fix for BLZ-343 and LCDS-1153.
Refactored the common logic for AMF0 and AMF3 back into AbstractAmfInput. Resolving class aliases, creating and registering a property proxy and instantiating the appropriate class are now handled in the superclass. The resolved className and the proxy are 'returned' to the subclasses via a holder array created in the subclasses and sent as a parameter.
blazeDS checkintests pass
lcds-trunk checkintests pass with the new flex-messaging-core.jar
lcds-trunk alltests-dataservice pass with the new flex-messaging-core.jar
Ticket Links:
    http://bugs.adobe.com/jira/browse/BLZ-343
    http://bugs.adobe.com/jira/browse/LCDS-1153
Modified Paths:
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/AbstractAmfInput.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf0Input.java
    blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java

Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received Error Code: U43M1D207. Any suggestions?

Update failed for Fireworks CS5 and Adobe Extension Manager CS5 5.0. Received Error Code: U43M1D207. Any suggestions?

Download the Fireworks updater from here:
https://www.adobe.com/support/fireworks/downloads_updaters.html
When you have downloaded and extracted the file right click and then click "run as Adminstrator".
It should work for you. I had the same issue and did this and everything worked,

How do I fix the audio quality on my iTunes? It sounds very distorted.

How do I fix the audio quality on my iTunes? It sounds very distorted.When listening to audio from other websites or programs, it sounds absolutely fine. Only when listening to music on my itunes is when it sounds awful and distorted. Please help.

Artwork doesn't sync with music in ipod...: Apple Support Communities
next try
- Unsync all music and resync
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

[svn:fx-trunk] 12295: fix for FLEXDOCS-889, and add doc on the WindowedApplication.useNativeDragManager property

Revision: 12295
Revision: 12295
Author:   [email protected]
Date:     2009-11-30 13:41:29 -0800 (Mon, 30 Nov 2009)
Log Message:
fix for FLEXDOCS-889, and add doc on the WindowedApplication.useNativeDragManager property
QE notes: -
Doc notes: -
Bugs: - FLEXDOCS-889
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/FLEXDOCS-889
    http://bugs.adobe.com/jira/browse/FLEXDOCS-889
Modified Paths:
    flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
    flex/sdk/trunk/frameworks/projects/airspark/src/spark/components/WindowedApplication.as
    flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/AnchorStyles.as

[svn:fx-3.x] 13209: Adding same fix for SDK-23838 and SDK-24205 to 3. x from trunk.

Revision: 13209
Revision: 13209
Author:   [email protected]
Date:     2009-12-23 15:45:53 -0800 (Wed, 23 Dec 2009)
Log Message:
Adding same fix for SDK-23838 and SDK-24205 to 3.x from trunk.
The dropDown was not receiving changes to styles nor dataproviders. This was a result of not recreating the dropDown each time it was shown. I've changed the default of the flag for destroying the dropDown to be true. I've also modified the code to only not destroy the dropDown when it is showing or being shown. I?\226?\128?\153ve also moved some of the code in the animation handler to check for a null dropDown first before destroying it.
QE notes: No
Doc notes: No
Bugs: SDK-23838, SDK-24205
Reviewer: Jason
Tests run: checkintests, ComboBox
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-23838
    http://bugs.adobe.com/jira/browse/SDK-24205
    http://bugs.adobe.com/jira/browse/SDK-23838
    http://bugs.adobe.com/jira/browse/SDK-24205
Modified Paths:
    flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/ComboBox.as

Why does the "fix" for firefox copying and pasting not work?

I did the fix a few times and restarted firefox, with no success. Also, I installed the latest version of firefox and it is slower now. I have to use firefox for school, otherwise I would just find another way.

In what way is Firefox slow?
Is this all the time or only with loading web pages?
What kind of fix do you mean with: ''Why does the "fix" for firefox copying and pasting not work'' ?

There are lots of issues in ios7 when those will be fixed for iPhone 5 . and can I retire my iPhone 5 to iOS 6 version ?

there are lots of issues in ios7 when those will be fixed for iPhone 5 . and can I restore my iPhone 5 to iOS 6 version ?

You might want to check out these two threads:
https://discussions.apple.com/thread/5325838?tstart=0
https://discussions.apple.com/thread/5369545?tstart=200
This topic has been discussed ad nauseum, they might give you some ideas on how to deal with the changes. Be sure to leave Apple your feedback on the matter: http://www.apple.com/feedback/ Good luck!

HP Slate 21 Kit Kat OTA Update Fix for Audio Quality and LAN Connectivity

Similar Messages

Maybe you are looking for