Possible fix for errors 11503 and 50
Here's a possible fix for Error 11503 and for error 50.
It worked for me and hopefully it will work for you.
I believe this error is caused by the incomplete downloading of either an update to an app. In my case it was caused by closing the lid on my laptop when I was downloading app updates on a very slow internet connection in a hotel.
Anyway, here is what I did that fixed it completely.
Close iTunes.
Go to this folder : /iTunes/Mobile Applications/Downloads
You'll find tmp files there. Drag them out of this folder to a temporary folder on your desktop. The Downloads folder should now be empty.
Restart iTunes.
All should be fine.
If it is, delete the desktop folder with all the temp files.
If it's not, then I can't help further, but that's what worked for me.
Several possible causes from the info you gave
Battery level low - recharge it for at least 4 hours till the full charge sign displays (2 prong icon instead of lightning icon).
Time to Reset the iPod - Press the Menu and center Button for about 10 secs till the Apple logo comes ON, then let go of the buttons.
your hardisk is starting to give problems, hence the skipping and some song refuse to play. - Do a disk diagnostic - follow this post by tt2.
https://discussions.apple.com/message/17028567#17028567
If you have updated any sofware application in Windows, then follow this Apple support procedure
http://support.apple.com/kb/TS1539
Most likely you have to do all, as the iPod hardisk filesystem would have been corrupted, or else the iPod Reset would bring it to normal operation.
Good Luck!
Similar Messages
-
My iTunes has been working fine until this afternoon and now when I go to download music I am getting error code 11503 or (-50) Help, please!
Here's a possible fix for Error 11503 and for error 50.
It worked for me and hopefully it will work for you.
I believe this error is caused by the incomplete downloading of either an update to an app, or perhaps a big music file. In my case it was caused by closing the lid on my laptop when I was downloading app updates on a very slow internet connection in a hotel.
Anyway, here is what I did that fixed it completely.
Close iTunes.
Go to this folder : /iTunes/Mobile Applications/Downloads
You'll find tmp files there. Drag them out of this folder to a temporary folder on your desktop. The Downloads folder should now be empty.
Restart iTunes.
All should be fine.
If it's not, then I can't help further, but that's what worked for me. -
MSI cleanup utility failure when trying fix for Error 1714
I am trying to run the suggested fix for:
Error 1714
Error "The installation source for this product is not available..." when you install or update (Acrobat 7.0, Acrobat 3D, Adobe Reader 7.0 on Windows)
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=332773
However MSIcuu2 fails and says:
Error: ActiveX component cant create object: WScript.Shell
Code: 800A01AD
Source: Microsoft VBSccript runtime errorFrom the menu bar, select
▹ System Preferences ▹ Energy Saver ▹ Power Adapter
and uncheck the box labeled Put the hard disk(s) to sleep when possible, if it's checked.
If the drive has more than one interface (USB, FireWire, Thunderbolt, eSATA), try one of the other interfaces.
Check that the data cable is securely inserted at both ends.
Try a different cable.
If you're connecting the drive through a hub, connect it directly to a built-in port on the Mac.
If you're connecting it directly, try a different port.
Disconnect all other devices on the bus, or as many as possible.
Test the drive with another Mac. Test another drive with this Mac.
If the drive is bus-powered, but has an AC adapter, connect the adapter.
Start up in Safe Mode and test.
If the drive doesn't work under any of the above conditions, and if another drive does work with the same Mac, then the drive has failed. You may be able to salvage the mechanism by removing it from the enclosure and installing it in another one, or in a drive dock. -
Possible fix for unable to eject ipod, files are in use by another program
If you get the above message and are using itunes 7, this may be a possible fix. Open itunes and connect your ipod. When you get the main screen, uncheck the box "open itunes when this ipod is connected" and then click apply in the lower right of the screen. After your ipod has finished updating (top of itunes says update complete) you must eject the ipod using the safely remove hardware from your tray in the taskbar. Unplug you ipod, close itunes. Now, open itunes and connect your ipod. After it updates, you should safely remove the ipod. Good luck.
pc Windows XP ProEasy way. Reset the iPod, then disconnect when you see the Apple logo.
Another way. Hold ctr-alt-del to bring up the Windows Task Manager. Go to the Processes tab and look for iTunesHelper.exe and iPodService.exe. Select them and hit the End Process button. Close the Windows Task Manager Window and try ejecting the iPod via the safely remove hardware method.
If you are still having problems you can try one more thing. Right click on the My Computer icon and select Manage from the list of actions. Go to the Services and Applications item and from there the services item. Double click on the services item to bring up the list of services currently installed on your computer. Look for the iPod Service and double click on it. From the new window select Stop. Now try again to eject using the safely remove hardware option.
If all else fails shut down the computer and disconnect the iPod. -
Possible Fix for Printing Problems in Leopard
I got this information from Mac OS X Leopard Edition book by David Pogue. Here's his possible fix for printing problems in Leopard...Open web browser and enter this address http://127.0.0.1:631. You'll find youself at a secret "front end" for CUPS (Common UNIX Printer System), the underlying printing technology for Mac OS X 10.5. This trick lets your Mac communicate with a huge array of older printers that dopn't yet have Mac OS X drivers. Using this administration screen, you can print a test page, stop your printer in its tracks, manage your networked printers and print jobs, and more–a very slick trick. Haven't tried it yet...anyone who does let me know how it worked!
If you literally "checked" them, meaning the checkboxes, that only affects their visibility. To remove them, select one and then click on the "minus" part of the "plus minus" at lower left.
Doug -
Possible fix for OS X 10.5.7, losing connection after sleep, restart
Possible fix for OS X 10.5.7, Airport, losing connection after sleep, restart, or cold reboot.
Issue: (For OS X 10.5.7 on iMac5,1, Intel Core 2 Duo)
=============================================
- After sleep, restart, cold reboot, even though cannot connect to Internet, but the AirPort bars are still full, as if connected.
- Losing Internet connection after sleep, restart, cold reboot.
Possible Fix:
1.Open Network Preference, click on the Location drop down list > Edit Location... > click on the wheel button > Duplicate Location.
a)Select this newly setup location; Use Diagnostic button to connect to the internet. Select Network or enter WEP password if necessary.
b)Test to make sure you can connect to a web page.
c)Go to sleep & wake up.
d)This time, the Airport bar will start to show correctly. Before, it will always be full even when not connected. Now there will be no bars or grey out when not connected.
2.On the left hand side of the Network Preference Window, there is a list of services, such as Airport, build-in ethernet, built-in FireWire, bluetooth, etc.
a)Click on the wheel button on the bottom of the service list; select Set Service Order...; move Airport to the top of the list.
b)Delete any services which you are sure that you are not going to use, such as Bluetooth, etc.
3.Pick one of the locations mentioned in #1, and make it sure it is connected. If not, use Diagnostic button. If you have to select Network or enter WEP password to connect, make it so.
a)Check to make sure you can connect to a web page.
4.Go to sleep & wake up. The Airport bar should be filled up quickly. Try to connect to a web page.
5.Restart computer. Test a web page.
6.Shut down & Start computer. Test a web page.
7.When everything is working fine, you can delete the extra location that you created in step #1.
8.Click the lock on the left lower corner of the Network Preference window to safeguard the setting.If my assessment is correct, the LIDE 200 driver is version 14.8.1 and dated 26-Sep-2008. It is possible that the driver will not work with the latest version of OSX. I would advise that you contact Canon and ask them the question.
(Removed link because of the way Flash drives the Canon site).
It is not uncommon (though irritating) that devices no longer work when an OS is upgraded. One has to ask the question if (or why) the driver was not written in such a way as to be OS version independent.
Chris
I spoke to Canon over here in Australia. Not helpful at all. In fact they were about as useful as an ashtray on on motorcycle. Having said that the tech seemed to think that there would be an update soon. But that is assuming that Canon are aware that there is a problem with that Scanner under OS X 10.5.7.
Message was edited by: 2point5 -
Do you have a fix for error 7 windows error 193 for itunes
Do you have a fix for error 7 (Windows error 193) when I try to open my itunes? I have uninstalled, reinstalled. Still does not work
Since you weren't able to deactivate your software before the hard disk crashed, you'll need to get assistance from our support staff. You can contact them through chat at http://www.adobe.com/support/contact/?issue=myOptions_activate
Be sure to have whatever serial numbers you have on hand (and make sure to register them). -
need a fix for error 6036
Hi,
When I encounter this error, I fixed this by uninstall all silverlight related component and reinstall it.
Besides, you could refer to link below:
http://support.microsoft.com/kb/2608523/en-us
You should download silverlight from the offical site:
http://www.microsoft.com/getsilverlight/get-started/install/default.aspx?reason=unsupportedplatform
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
[svn:fx-trunk] 12294: * Fix for error reporting bug.
Revision: 12294
Revision: 12294
Author: [email protected]
Date: 2009-11-30 13:25:28 -0800 (Mon, 30 Nov 2009)
Log Message:
Fix for error reporting bug. The bug was caused by a warning being
reported during one compilation and then an error being reported in
a following compilation. Due to the warning, the Source's logger
was disconnected instead of being nulled out during the first
compilation. Then in the second compilation, we weren't reassigning
the logger, so the disconnected logger was being left in place. As
a result, it was throwing off expected error counts and caused an
assert to fire.
QE notes: There is probably an easier way to reproduce the assertion
that George hit without having to create multiple projects
and without having to manually copy SWC's around. I didn't
realize this until I had a fix, though. One key aspect that
George didn't note and might not have realized, is that the
variable needs to cause a warning, so leaving off a
namespace works, but making it public, private, etc doesn't.
Doc notes:
Bugs: SDK-24314
Reviewer: Corey
Tests run: checkintests
Is noteworthy for integration: fixes FB issue
Code-level description of changes:
Modified setLogger() to always reassign logger.
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-24314
Modified Paths:
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/Source.java -
BPM for error handling and acknowledgements
Hi,
Can any one tell me how to handle BPM for error handling and acknowledgements in one scenario.
Please send me the link if you have other wise give me the solution on the same.
Thanks,
NageshHi !
Just check out these links This might help you.
Usually Application Level Acknowledgement is considered during Sync communication. If you are using RFC, you can make use of Sync communication. So you can handle it without bpm, provided your both sender and receiver are sync interfaces.
To know about Ack-
http://help.sap.com/saphelp_nw2004s/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
you can not dirrectly access the content of the ACK, however the BPM shows different behaviours based on the ACK status. E.g. if the ACK contains a success message the BPM will continue in its normal process, if the ACK contains a permanent error, it will either stop or go through an exception branch (provided such a branch has been defined). Have a look at the documentation: http://help.sap.com/saphelp_nw04/helpdata/en/43/65ce41ae343e2be10000000a1553f6/content.htm It doesnt"t state the above mentioned behaviour in detail but says that you need to define an exception branch.
The trickiest part is always to find out, when you will get a transient vs. as permanent error ack. If you are using ACKs with Proxies refer also to this link http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm and this http://help.sap.com/saphelp_nw04/helpdata/en/f4/8620c6b58c422c960c53f3ed71b432/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/29/345d3b7c32a527e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/7b/94553b4d53273de10000000a114084/content.htm
<b>The following link has entire configuration of Receiver XI Adapter (including acknowledgements)</b>
http://help.sap.com/saphelp_nw04/helpdata/en/f4/0a1640a991c742e10000000a1550b0/content.htm
<b> eror handling in BPM.
</b>
1. CCMS monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/42fb24ff-0a01-0010-d48d-ed27a70205a8
2. BPM Monitoring
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
3. Monitoring XML Messages http://help.sap.com/saphelp_nw04/helpdata/en/41/b715045ffc11d5b3ea0050da403d6a/frameset.htm
/people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
monitoring BPm https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e7bc3a5a-0501-0010-1095-eb47159e169c
Reconciliation of Messages in BPM - /people/krishna.moorthyp/blog/2006/04/08/reconciliation-of-messages-in-bpm
Also see the below BPM related links
check list for BPM https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3bf550d4-0201-0010-b2ae-8569d193124e
/people/shabarish.vijayakumar/blog/2005/08/03/xpath-to-show-the-path-multiple-receivers
http://help.sap.com/saphelp_nw04/helpdata/en/3c/831620a4f1044dba38b370f77835cc/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/62/dcef46dae42142911c8f14ca7a7c39/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/de/766840bf0cbf49e10000000a1550b0/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cb/15163ff8519a06e10000000a114084/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/08/16163ff8519a06e10000000a114084/content.htm
Many other examples can be found under the following link at help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/14/80243b4a66ae0ce10000000a11402f/frameset.htm
And some weblogs
https://weblogs.sdn.sap.com/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken]
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm *****
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm
/people/michal.krawczyk2/blog/2005/06/11/xi-how-to-retrieve-messageid-from-a-bpm
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit
/people/sravya.talanki2/blog/2005/08/24/do-you-like-to-understand-147correlation148-in-xi
/people/michal.krawczyk2/blog/2005/09/04/xi-do-you-realy-enjoy-clicking-and-waiting-while-tracing-bpm-steps *****
/people/udo.martens/blog/2005/09/30/one-logical-system-name-for-serveral-bpm-acknowledgements *****
/people/sudharshan.aravamudan/blog/2005/12/01/illustration-of-multi-mapping-and-message-split-using-bpm-in-sap-exchange-infrastructure
/people/kannan.kailas/blog/2005/12/07/posting-multiple-idocs-with-acknowledgement
Also have a look at these seminars,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/daea5871-0701-0010-12aa-c3a0c6d54e02
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/media/uuid/e8515171-0701-0010-be98-e37bec4706cc
Thanks !!!
Regards
Abhishek Agrahari
Questions are welcome here!!
<b>Also mark helpful answers by rewarding points</b> -
[svn:bz-trunk] 10631: Proper fix for BLZ-343 and LCDS-1153.
Revision: 10631
Author: [email protected]
Date: 2009-09-28 05:23:42 -0700 (Mon, 28 Sep 2009)
Log Message:
Proper fix for BLZ-343 and LCDS-1153.
Refactored the common logic for AMF0 and AMF3 back into AbstractAmfInput. Resolving class aliases, creating and registering a property proxy and instantiating the appropriate class are now handled in the superclass. The resolved className and the proxy are 'returned' to the subclasses via a holder array created in the subclasses and sent as a parameter.
blazeDS checkintests pass
lcds-trunk checkintests pass with the new flex-messaging-core.jar
lcds-trunk alltests-dataservice pass with the new flex-messaging-core.jar
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-343
http://bugs.adobe.com/jira/browse/LCDS-1153
Modified Paths:
blazeds/trunk/modules/core/src/flex/messaging/io/amf/AbstractAmfInput.java
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf0Input.java
blazeds/trunk/modules/core/src/flex/messaging/io/amf/Amf3Input.java -
Revision: 12295
Revision: 12295
Author: [email protected]
Date: 2009-11-30 13:41:29 -0800 (Mon, 30 Nov 2009)
Log Message:
fix for FLEXDOCS-889, and add doc on the WindowedApplication.useNativeDragManager property
QE notes: -
Doc notes: -
Bugs: - FLEXDOCS-889
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/FLEXDOCS-889
http://bugs.adobe.com/jira/browse/FLEXDOCS-889
Modified Paths:
flex/sdk/trunk/frameworks/projects/airframework/src/mx/core/WindowedApplication.as
flex/sdk/trunk/frameworks/projects/airspark/src/spark/components/WindowedApplication.as
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/metadata/AnchorStyles.as -
Revision: 13209
Revision: 13209
Author: [email protected]
Date: 2009-12-23 15:45:53 -0800 (Wed, 23 Dec 2009)
Log Message:
Adding same fix for SDK-23838 and SDK-24205 to 3.x from trunk.
The dropDown was not receiving changes to styles nor dataproviders. This was a result of not recreating the dropDown each time it was shown. I've changed the default of the flag for destroying the dropDown to be true. I've also modified the code to only not destroy the dropDown when it is showing or being shown. I?\226?\128?\153ve also moved some of the code in the animation handler to check for a null dropDown first before destroying it.
QE notes: No
Doc notes: No
Bugs: SDK-23838, SDK-24205
Reviewer: Jason
Tests run: checkintests, ComboBox
Is noteworthy for integration: No
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-23838
http://bugs.adobe.com/jira/browse/SDK-24205
http://bugs.adobe.com/jira/browse/SDK-23838
http://bugs.adobe.com/jira/browse/SDK-24205
Modified Paths:
flex/sdk/branches/3.x/frameworks/projects/framework/src/mx/controls/ComboBox.as -
FAQ: Tips/Fixs for clicks, pops and glitches in sound ca
I have come across this little article from the internet while surfing and thought it could be of some use posting it here. Follow the link below.
Tips/Fixs for clicks, pops and glitches in sound card
If after following the tips on this page you are still having troubles, then contact support or wait for other peers in the forum for further advise and suggestion.
This particular phrase that's quoted from the article which is very true.
"This is a HUGE topic and I have come across it many times. The hardest thing to do in tech support is to explain to someone that the fault is not to do with the audio card, but instead with the way the computer is setup or the fault of components in their system. Pcs are built to a budget and parts do suffer because of this."I know this stuff is 3 months old but I just got mine and hadn't yet used the pin function so now I know.
I hope you are right Nancy that it will have updates, but I really doubt it. This is the norm for Microsoft when stuff they put out bombs. Dish Network had a DVR receiver many years ago that had Microsoft software installed and it was buggy to say the least. They updated it a few times but then abandon it. For a few years Microsoft wouldn't release the code to Dish Network to allow DN to fix the bugs. It was a real "Hate Microsoft" time for those users. DN had to put out their own coded DVR receivers and let the Microsoft ones die.
I think VZ made a deal with MS and removed the stuff MS wasn't supporting. Then VZ put them out without needing a data package to unload them. -
I loaded the software fix for face time and in loading the new software I lost all of my other content (WITHOUT ANY WARNING). This included my contacts, photos, music. The music I can restore and losing the contacts is an inconvenience, but losing the photos is devastating.
Any ideas?What software fix for FaceTime? What software did you apply?
Did you backup your iPhone before you updated it with whatever update you applied as described in HT1766? If so, did you backup to iCloud or iTunes? Either way your data should be restorable from that backup.
Maybe you are looking for
-
Automatic file naming and data saving
Hi, I am building a program where there will be several I-V scan for each value of temperature. I would like to make the data saving fully automatic. To explain in more deatils: I want the program to generate a new file on its own , give a file name
-
SQL Server 2000 Reporting withJava
Hi All, Can any one give the code to open SQL Server 2000 Reporting file (i.e, with the extension '.rdl') as we do for the crystal reports '.rpt' file in jsp. Is there any eclipse plugin for SQL Server 2000 Reporting service. thanks in advance.
-
1st time Smart Phone user. Just got a Pantech Marauder. How do i load Adobe Flash or Adobe Air?
-
Hi all, Can Material Document No ranges be changed for every fiscal year ? say i want to discontinue the existing no range series and start the document range with a new series for the new fiscal year . is this possible ? i tried doing this but the s
-
HCM Process and Forms - Authorization issue
Hi Experts, I have to developed one HCM process and forms for leave request. Workflow is assigned to the form. When I test the Process with in the R/3 using Txn 'HRASR_TEST_PROCESS' I got the Error, Work Item Not Found; Workflow Not Started" and "Pr