Hp x4632 all in one change time on fax

HP OFFICEJET 4632 all in one- Just the FAX !!! Have went online and referred to manual but NO where am I able to change the factory preset time. It is 6 hrs ahead and would like some help! I end up looking over what I have set on initial set-up and run the fax test, it all says PASS, and even SOMETIMES puts the correct time in upper corner on that fax test....but when I send a fax, it will put my 9:30 am fax as sent at 3:44pm. Its like it was pre-set as I cannot find how to change. HELP thanks avbuck

Hi @avbuck
I wonder if the time and date option in the Preferences impacts the Fax time. Let's arrow down to the Setup menu, then go to Preferences and select Date and Time. Please make sure this time is set correctly.
Please let me know if this resolves the issue or not. Thanks.
Please click the Thumbs up icon below to thank me for responding.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Sunshyn2005 - I work on behalf of HP

Similar Messages

All in One Printer/Scanner/Copier/Fax Recommendations

Hi,
I'm looking to purchase an all in one printer/scanner/copier/fax device. I was wondering what recommendations other people have. The main purpose would be to print photos, scan photos and some small business office printing. Note, a fax would be nice, but is not absolutely neccessary.
Scanning photos would be important, since I plan to scan our family's photo albums into iPhoto.
Also, is there a printer than can communicate with the Mini using bluetooth? If so , does it work well?
Since I have limited desk space, size would be an issue (smaller the better).
Looking to spend about $200, slightly more if the cost justifies itself. Less is always better.
Thanks in advance!

The Brother MFC-420cn
http://www.brother-usa.com/MFC/ModelDetail.aspx?ProductID=MFC420CN
does everything you ask for less than $100 -- except bluetooth.
The Pluses: Good Mac software. Cheap ink. Networkable.
The construction is flimsy plastic, but if you are gentle it will hold up.
Definitely small footprint.
Paper path is 180 degrees, which is not my preference.
Personally, I prefer Epson all-in-ones. Also good Mac software and 80 degree paper path for less jamming. Exceptional scan quality.
http://www.epson.com/cgi-bin/Store/ProductCategory.jsp?oid=-8182

SAP faxing from all-in-one (printer/copier/scanner/fax) device

Hi,
We have a all-in-one printer/copier/scanner/fax (Ricoh Aficio 3025) and would like to make use of it to send fax from SAP.
I know how to set it up as a printer. But how should I go about setting it up to send fax?
Can someone help?
Thanks in advance.
Edited by: Sisab Nimda on Jan 8, 2009 2:38 PM

You can't just set it up as a fax... you need a fax server in order to send faxes (I.E. Rightfax)... basically the way it works is that you create a node in SCOT for faxes and send the data to the fax server via SMTP and the fax server deliver the fax to your hardware.
Check the SMTP guide,
http://help.sap.com/SAPHELP_NW04s/helpdata/EN/af/73563c1e734f0fe10000000a114084/content.htm
Regards
Juan

BB off for a few days -- When turn on reconciled emails all show one date/time.

If I am away for a few days -- with the Blackberry off -- Then when I return and turn on the unit, it will reconcile email through my work blackberry server. The emails that get downloaded at that time all show on my blackberry email listing as received at one time -- when the reconciliation occurred -- not the dates/times that the actual emails were written. My work email (on my computer at work) will show the dates/times that the actual emails were written -- even though I also had been logged out from my work email for the time I was away. This is a real pain for viewing / looking through and finding emails later on the device. So now, I have to leave the unit on and plugged into the wall when away -- so my emails will show the right date/time on the device. Is there a way to set things up so I don't have to resort to this? -- seems to me that there must be -- otherwise a lot more people would raise this concern.
Thanks,

The last time I checked the incoming emails will always go by the date/time on the device itself. There is not a way to change this behavior.
Do you turn it off to conserve battery power? If so you can always place the device in Standby mode. The battery drains much slower in this mode and should last anywhere from 10-15 days.
If someone has been helpful please consider giving them kudos by clicking the star to the left of their post.
Remember to resolve your thread by clicking Accepted Solution.

My HP 2210 all-in-one printer is not faxing? could I get a new disk to reinstall it so fax will wor

I have had my HP 2210 al-in-one printer for good many years and worked just fine. Now it is not faxing, it say's it is not connected. I have no idea how it got disconnected? I will need the window XP to reconnect it. I had my brother in law install every thing and we cant find the disk? Could I get a disk for the printer and a book so I could reinstall it all and have it working again like it did? Please get back to me and let me know if that is a available to me. My e mail address is
[Personal Information Removed] My Name is Rosa England

Hi MackFarland,
I see that you're having problems with your printer. I would take a look at the document below.
Printer Offline
Let me know how it goes.

Officejet 6500 All in one Cannot print to Fax on Mx OSX Maverics

Im on a new Mac running OSX Maverics. I'm new to mac. On my old windows computer, I could print to fax with this same printer. I would choose the OcciceJet 6500 Fax as my printer and fax any document from my screen. Now on the Mac I cannot do this. I dont see that as an option anywhere.
In my printer choices (when I click File>Print) I only see OfficeJet6500 E709a. On my windows computer i will see "OfficeJet6500 E709a" and "OfficeJet6500 E709a Fax" .
Can I print from my screen on a mac like I do on windows? What am i doing wrong?
Ive seen other people write things about sending a fax being a choice in the PDF dropdown but i dont see it there either.
Ive run all software updates I can find. I have the latest version of Mavericks.
Any help would be greatly appreciated.
Thanks!
Daniel

Hi Daniel1963,
The fax driver has to be installed in printers and scanners window in able to fax from the computer.
Click on the Apple.
Click system preferences, click the printers and scanner icon, then click the + sign, then select the
printer name with fax beside it if it is available from the list, then click on the add button.
(if the Apple Update doesn't add the fax driver then you won't be able to send the fax from the computer since there isn't a Full Feature driver for Mavericks)
Try sending a fax.
Go to file, print and select the fax and fill out fax number, then send the fax.
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Officejet 6500 All in one Cannot print to Fax on Mx OSX Mavericks

Im on a new Mac running OSX Maverics. I'm new to mac. On my old windows computer, I could print to fax with this same printer. I would choose the OcciceJet 6500 Fax as my printer and fax any document from my screen. Now on the Mac I cannot do this. I dont see that as an option anywhere.
In my printer choices (when I click File>Print) I only see OfficeJet6500 E709a. On my windows computer i will see "OfficeJet6500 E709a" and "OfficeJet6500 E709a Fax" .
Can I print from my screen on a mac like I do on windows? What am i doing wrong?
Ive seen other people write things about sending a fax being a choice in the PDF dropdown but i dont see it there either.
Ive run all software updates I can find. I have the latest version of Mavericks.
Any help would be greatly appreciated.
Thanks!
Daniel

Hi
Can you try this.
Download this HP SW driver from HP.com
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4142&lc=en&cc=us&dlc=en&sw_lang=&product=4083...
This is a mountain lion installer, currently there's no support for Mavericks. Just downlaod this.
After you ahve downloaded, install the sw.
When you reach the page below, try to check everything.
Whne you reach this page,select the "Bonjour Multifunction" and in Use: select the the HP Officejet ******. Dont select AirPrint. You should see the HP Fax during this page. If dontsee the Fax, just wait for a while maybe 2mins. Update me if you dont. And continue the installation.
After the installation, click "System Preferences" in the dock. Select Printers & Scanners, on this page you should see the Printers and Faxes of your printer.
Please try it out and update me the outcome.

Why does photosmart c6180 all in one when printing of faxing produces a black line down center of pa

everytime i sent a fax ormake a copy or print, I get a black line straight down the center of page

Hi there 1225,
This article covers the problem with black lines you are having. Give the steps outlined a shot and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Image Capture and Samsung All-in-One SCX4825FN Preview Delay

I am trying to scan using a Samsung SCX4825FN all-in-one printer, scanner and fax machine. It is installed using an ethernet cable via my internal network. Two Macs see and scan with it without a problem. The third used to, but since I tried installing Samsung's own scan software (just to see if there were any OCR capability in it, which there wasn't), each time I try to open up the flatbed scanning, it takes hours (literally) to do the preview scan, and in the meantime, the computer is almost unusable. The printer (scanner) appears to correctly do the preview scan, then do a more detailed scan (at very high resolution?), which takes it ages, and it uses this to build the preview scan.
Other computers haven't changed, so I assume it is the since Mac that needs fixing. It also doesn't happen with the multi-sheet feeder scan on any of the computers, so it is only the flat-bed scan that causes the problem.
I have tried fixing permissions, removing the Samsung software completely (I then couldn't see the scanner at all) then reinstalling the minimal amount, deleting permissions for Image Capture and for the Samsung Scanning software, changing preferences within the Samsung software, but all to no avail. It still takes a couple of hours to complete the initial preview scan on the one computer but not the others. Has anyone got any other ideas?
I would like to delete the Samsung software off the problem Mac and then copy over the required drivers from another computer to let it scan without a problem using the standard Snow Leopard install, but I am not sure which files to copy over. I am worried that the (not very good) Samsung installation software is taking off more files than it is supposed to when I remove it, but I am not sure what it is supposed to leave on there, or perhaps it is leaving too much on there.
The nice installation software from Samsung forces a restart each time you try and do anything, as well as insisting that no other software is running while it is trying to make changes, so I am already a little unhappy about what kind of changes it is trying to make since most Apple software is not that crazy...

Interestingly here is what I received from Brother. (Note that scanning using the Control Center works fine.):
Dear Brother Customer,
Thank you for taking the time to write to us.
Is your machine able to scan using the Brother ControlCenter software?
If you are able to scan with the ControlCenter, the drivers are
installed and working properly.
Your issue is with Apple's Image Capture software and should be referred
to them for support.
When you open the Apple software, you will need to click DEVICES in the
Menu Bar, then select the disclosure triangle next to TWAIN devices to
reveal the Brother TWAIN device.
Select the Brother TWAIN and click OK.
You should now be able to scan with Apple's Image Capture application.
For any additional assistance with the Apple application, we suggest you
contact Apple for assistance.
We hope this information will be useful to you. If we can be of further
assistance, please let us know.
Best Regards,
MFC Macintosh Support
Brother International, USA
Email: [email protected]
So, who owns the problem: Brother or Apple? If I go to the Apple Store I see Canon and HP scannners for sale but not Brother. Maybe that is part of the problem. Corporate relations between Brother and Apple.

EPSON Artisan 810 a Bi-Function, not Multi-Function, All-In-One

I was in a local OfficeMax, looking at an *EPSON Artisan 810* all-in-one (Print, Scan. FAX, Copy), which came in a box covered with text and imagery detailing all of the amazing features it has. To my delight, I discovered that it supported OS X, albeit, they note that "some features like sharing memory cards over a network may not be supported". You'd think that would imply that tertiary (or specialty) functions may not work. But, surely, the basic 4 functions would, right?
It would have been nice if the employees had any kind of a clue with regard to the products they sell. But they don't. So I checked some support forums and the EPSON driver download page (on my phone), and sure enough, they even have Snow Leopard drivers. So I buy the printer and take it home.
I should have suspected something may be amiss when the installer asked me to enter my administrator password, but the dialog requesting the credentials kept losing focus, making it difficult to type in my password. Yikes.
I managed to get through the 30-part install (well, it felt like 30 separate, chained installers). The installer vanished, and I had no printer in my "Print and FAX" Preference Pane. Nice.
So, I add a printer manually, and it did see the EPSON as a Bonjour device. So I jump over to try the scanner, and I get a troubleshooter. After scrounging around the web, I found some advice from a user who discovered that you have to go into the Utilities folder and run an EPSON scanner utility to find and configure the device. ugh. Once I did that, it seemed to work.
Now, on to the FAX. The preference pane did not see a FAX device anywhere, and the EPSON printer itself has no FAX capabilities. So back to the web. After an hour of searching, nada. And no one even complaining about this apparent "missing" feature. So I hit the manual, and notice that FAXing from a computer is only supported in Windows.
At this point, I'm not even going to try to get the "Copy" function working.
OFFICEMAX Knowledgeable Sales Staff: FAIL
EPSON Customer Support: FAIL
EPSON Product: FAIL
EPSON Integrity: FAIL
So, in summary, this is a bi-function, not a multi-function, device. It prints and scans. They should put this on the box so people know what they're getting (or in this case, not getting). It's a real shame too, because I went with EPSON because Hewlett Packard did something similar with a computer I bought. The machine was billed as a multimedia and entertainment computer, yet, it couldn't play a game that was 5 years old. Do any of these companies have their metaphoric poop together?
And don't get me started on Lexmark.

Epson has the (annoying to me) built-in default of numbering each scan; so whatever name you would decide to use, you would still wind up with "mypicture093.jpg" for instance. That is true if you use the Epson Scan software.In any case, if you use that, once you click on "scan", you should get a new pop up window where you can enter the name (called Prefix by Epson) and where to save it. You cannot get rid of the "start number", but you can delete the number once the icon appears on your desktop or in a folder: just click it once and then hit "return" on your keyboard and you can change part of the name or the entire name for that matter.
If you choose to use the OS built-in app (under System Preferences -> Print & Fax), simply highlight the Artisan 810 and click on Scan and then on "open scanner"; you are then presented with a new window where you can change all sorts of settings incl. the name.

I have an hp photosmart c7280 all-in-one series printer won't print. error message, system problem

I have an HP Photosmart All-in-One C7280 series printer/fax/copier/scanner. I have been having issues with printing for the past few weeks. It is a wireless printer, with a jack into the wall (for fax) and it is plugged into a power source. I never used to have issues with it before, but recently, it won't print when I send a document to it to print. It will print its configuration pages, reports, etc if I select them from the Printer's menu but not when I send a doc to it to print. First it was saying it was offline, but I figured out how to override that by operating as an administrator and selecting "Use Printer Online" from the dropdown menu when I right clicked on the printer from the control panel. But now it says "Error: Printer failed to print document. System error".
Noooo clue what to do now. This is the only color printer we have so we kind of need it to work. We bought this printer off the shelf at a office store (before I started working here) and so we don't have any designated technichians to work on it. I asked the guy who services our Image Runner Copier to look at it but he had no clue what was wrong with it. Hopefully someone can help?

goestherain,
I need to know what operating system you are using to helps narrow troubleshooting a bit, what OS are you running?
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

All-in-one laser printer suggestion?

I need a laser all-in-one printer (print/scan/fax) to operate with my iMac (20", Intel Core Duo 2 GHz). Can anyone recommend a brand and model that works well with a Mac and doesn't cost too too much? I just purchased (and then returned) a Canon (model Imageclass MF4150) which, upon opening the box, I found did have a scan function for Mac OS. Any recommendations are very much appreciated. D.

If the MF4150 experience hasn't put you off Canon, I can recommend the MF4680. It can push scan to a shared folder on your Mac using Ethernet. All you need to do is enable Windows sharing on your Mac, then select a folder you want to scan to. Then on the MF4680, you create an entry to send the file to this shared folder.
PaHu

How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

How can I change the space between a checkbox and text all at one time? I have a lot of checkboxes in my form.

Okay, I haven't found a way to add an extra space using Find/replace, but you might be able to add some text wrap to the check boxes that will push the text away from them.
Open Find/Replace and click the Object tab.
Click the Specify attributes to find button to the right of the Find Object Format: field.
Under Basic Attributes, choose Stroke and then the Black swatch (assuming the black swatch is applied to the strokes of your check boxes). If there are no other stand-alone objects in your form with a Black stroke, this should be all you need. (If there are Black strokes on your table cells, they will be ignored.)
Click OK
Click the Specify attributes to change button to the right of the Change Object Format: field.
Under Basic Attributes, choose Text Wrap & Other > Text Wrap > Type: > Wrap around bounding box (2nd button from left)
Under Offset, set a Right offset at the distance you'd like to add (I don't know what units you use, but the 3-5 points might work for your purposes...might take some trial-and-error to get it where you want)
Click OK
Click Change All

Is there and app that does the following. Multiple apps are showing a clock in different rooms, all are synced together, one ipad is a master ipad and if you change the time on it all other ipads change the time

Is there and app that does the following. Multiple apps are showing a clock in different rooms, all are synced together, one ipad is a master ipad and if you change the time on it all other ipads change the time

None of the spreadsheet apps that work with Excel files offer anything like full native support in iOS. Apple's own Numbers app pairs down features for the iOS version. The hardware is simply not up to what a true computer is capable of, so all apps like QuickOffice, DocumentsToGo, Numbers and so forth offer reduced features from their computer-version counterparts.
I think a custom app will be your only real choice, be it a fully standalone app, or something built in filemaker or some other db-based platform.

My Preview is open all my pics at time instead of open one by one. It occurs when I try to open any type of JPEG file. That's strange and I'm a new macbook user. I hope somebody can help me out. Thanks

My Preview opens all my pics at time instead of open one by one. It occurs when I open any JPG FILE. What should I do to fix it? Thanks

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

Hp x4632 all in one change time on fax

Similar Messages

Maybe you are looking for