HR Infosets - switch object selection question?

Dear All,
I encounter this issue. I create a HR Infosets using logical database PNPCE. As the requirement of our HR Dept, so we need to add more extras fields (by code).
The problem when we switch on/off object selection (from menu):
- When the object selection is off: all the extras fields I add are available.
- When the object selection is on: all of them are not available.
This is my idea. All the field of infosets will be display when the object selection is on depend on SAP internal field, and the extra field we add by code will not be displayed.
But it's my opinion. So please help me with this issue.
Thanks in advanced.
Thien.
Edited by: Pham Thien on Nov 18, 2008 3:12 AM

Hi,
We can hide those options by implementing the Layoutsets. If you need to hide those options for standard admin user itself, then you need to change the standard Layoutsets, which is not recommended. These options are defined in the "Command Group" of the Layoutsets.
You can Navigate to Layoutsets thru below path.
Sys Admin -> System Configuration -> Knowledge Management ->Content Management -> User Interface -> Settings -> Layoutset
Tweaking over the Layoutset Command group properties will hide the options which you mentioned.
Thanks,
Mahendran B.

Similar Messages

Is it possible to make changes on object selection area???

Hi friends,
I wanna ask a question about portal.
When we connect to portal we choose corporate documents , there are files of departmants like hr, it, corporate general ...
We want some changes in object selection area of these files. For example when we get into object selection area of IT there are objects like favorites, others, personel documents, common document, common documents.
My question is
Can we deduct or hide some of these objects from object selection area? If we can, how can we do it?
Thanks
Muzaffer Öz
Edited by: Muzaffer Oz on Dec 2, 2011 9:31 AM
Edited by: Muzaffer Oz on Dec 2, 2011 9:44 AM

Hi,
We can hide those options by implementing the Layoutsets. If you need to hide those options for standard admin user itself, then you need to change the standard Layoutsets, which is not recommended. These options are defined in the "Command Group" of the Layoutsets.
You can Navigate to Layoutsets thru below path.
Sys Admin -> System Configuration -> Knowledge Management ->Content Management -> User Interface -> Settings -> Layoutset
Tweaking over the Layoutset Command group properties will hide the options which you mentioned.
Thanks,
Mahendran B.

Keep 3D objects selected in all views?

I've looked in the manual but I often miss the obvious search criteria.
One of the cool features of After Effects is that an object is shown as selected in all 3D views. Switching views leaves the object selected along with its motion path.
Is this not possible in Motion? It's making me really cranky.
Another thing I can do in AE is tell the app to always preview a specific view. That's usually the Active Camera but it's easily changed. With Motion, the preview seems to always be the last view I was working in. That's making me cranky, too.
bogiesan

Hmm, clicking on the upper left corner in each viewport, where there is a black button/drop down list of possible views, seems to work. An object selected in the timeline will remain selected when changing window or viewport focus this way. You can also use the camera view icons in the lower left corner. Thanks. How did you know that? In the manual someplace? I love the Motion manual. No, really, I do.
editorial: That's a stupid way of switching window focus. I'm starting to understand how Motion thinks, though. When I click into a window, Motion assumes I'm clicking into the scene and therefore deselecting everything. Except applications like AE assume the user is intelligent, the first click is merely selecting the view and is not meant to deselect everything.
Thanks again TCY, very helpful. Greenie for you!
bogiesan

IAd Producer Switch Object

Hello All,
I'm attempting an iBook for my school, and I would like to add a widget to this book. In this widget I have an anatomical drawing, and I would like to use the switch object to toggle arrows on specific structures. I've been successful in getting the arrow to appear by setting the activated state of the switch to call an action whereby the arrow displays, however, there is no option for me to set the inactivated event, to "un-display" the arrow, on the object.
I need a bit of javascript to determine the state of the switch, so I can call the appropriate action list, but I have absolutely no idea how this is accomplished. I have zero experience with javascript.
any help is most appreciated.
best regards.

Hello,
Your best option would be to listen to the iAd.Switch onControlValueChange method and check the value of the on attribute to determine whether to show the arrows or not. Pseudocode follows, but you will need to tweak to suit the rest of the widget.
Include in JavaScript for the switch control (click the "Code" button at bottom of iAd Producer with switch selected):
this.onControlValueChange = function (event) {
    if (this.on) {
        this.viewController.showArrows();
    else {
        this.viewController.hideArrows();
What the show/hideArrows methods do are up to you. You could grab each of the arrows and change the visibility of the arrow.
Best of luck,
Josh

Object Tracing? Object Selection?

Hi guys, sorry for the noob-like thread making and whatnot. This question involves both Photoshop & Illustrator. I would Google my current problem if I could but the problem is, I don't actually know what terms to use!
So my question is this: How does one make an object selectable like this? What is this technique even called? Object Tracing?
When I'm compiling catalogues together, having the objects like this really makes life easier (especially with aligning). Currently I am using Photoshop, removing the background and having them saved as PNG, but these guys (the company we sent these product photos to) had them as EPS format.
When I open these files in Photoshop:
Instead of "Layer 0" (which I usually get with the PNGs) the product is part of the "Background" layer.
Any advice on how to achieve the same result? What is it called? What are the advantages of doing this as opposed to just removing the background, making the space around the object transparent and saving it as a PNG file?
Thanks in advance!

Thanks for the response! Interesting, why is it better to use PSD instead of PNG? What are the advantages?
Ah, so it's called a Clipping Path. How would the company have done that? Originally all these products had a white albeit dirty white-greyish background. Would they have had to use the lasso tool to select the product, create a new image and save as EPS?
Thanks again for the response, very enlightening for a rookie like me!

Translation workbench in BI 7 - No objects selected TL561

Hello everyone,
This seems a recurring question with no clear answer on these forums.
You need to translate a lot of objects and queries, so you go to the translation part in RSA1.
You create some translators, languages and an object list here. The guides tell you to go to SE63 and start a worklist based on your object list, but when you press the 'load objects' button, the message 'no objects selected' appears even when you select the 'deactivate selection' option.
Is there anyone who has encountered this and solved it? It would be good to have on thread with a tangible solution in it

I also have this same problem. I don't know why the topic is marked as answered when it really isn't.
Exact same scenario
'No Objects Selected" Message no. TL561
Actually, I found an answer to this question here,
Link: Re: SAP translation tool
The "Deactivate language settings" box must be checked to generate a list of objects.
Edited by: Randy Plunkett on Dec 17, 2010 5:08 PM

Issue while using the report : Object selection period

Hi All,
Using report rhrhaz00 i will get raltionship changes org units. Here my question is : when i pass org unit i am able get log changes properly. Here how to get current changes. when i give keydate as sy-datum or Data selection period or Object selection period as sy-datum its displaying all the records,.
Anybody having any idea how to get current day records.
Regards,
Maheedhar

Problem solved by own.

Switching off selected devices

Hi, I wonder if anyone can help. I have a BT Home Hub 3 and I heard that you can switch off selected devices at various times of the day, i.e. switching off my son's xbox without the rest of the familiy suffering with a lack of internet. Is this facility available with the home hub 3 or would i have to upgrade to a newer system.
Thanks

Have a look here:
http://bt.custhelp.com/app/answers/detail/a_id/11364/related/1
Hope this helps
If my post has been useful, please click on the Ratings star on the left-hand side of the post.

Paste in place (In front of object selected)

I am running Illustrator CC 2014 and a useful tool that I go to frequently is Paste in Place (Ctrl + F). In older versions of Illustrator when using 'Paste in Place' you could copy an object, select any other particular object, hit CTRL + F, and the copied object would then be placed just in front of the object previously selected. Now, when I 'Paste in Place' it places the object in front of all, instead of at the designated place in a layer's order. Am I missing something? Any help would be greatly appreciated.

Is "Remember layer" checked in the layer panel's menu? (Monika Gause Sep 18, 2014 10:00 AM)
Ah HA!
I'm working through the Illustrator Classroom in a Book for AI CS6 in the Perspective Drawing section and had this problem. A very easily overlooked setting. Resetting the Workspace DOESN'T clear this. It's apparently saved in the AIPrefs file.

Object Selection Frustrations

I am experiencing the following, very frustrating,
usabilities issues relating to object selection:
1) More often than not when I click on an object in the slide
editing pane in order to select it, I end up moving or resizing it
slightly. This is quickly and easily undone with a Ctrl-Z (Undo),
but it costs me time and mental energy assessing whether or not
this has occurred. Is there a technique for selecting an object
that guarantees that the object won't be modified in any way?
2) In this scenario I have select an object B ('b' for back)
in the timeline pane that is behind another object F ('f' for
front), and I want to modify (move, resize) B in the slide editing
pane. The object B displays in the slide editing pane as though it
is selected (i.e. resize handles), but if I then click on object B
to interact with it, object F >>always<< gets selected.
3) In this scenario I have selected an object in the timeline
pane, and I then want to move it a small amount using, say, the
down arrow. Even though the object appears as selected in the slide
eding pane, pressing the down arrow acts on the >>timeline
pane<< (which still has focus). I have to explicitly click on
the object in the slide editing pane before being able to use the
down arrow to move it. This clicking to select invariably modifies
the object in some unintended manner, as described in scenario 1
above.
I hope there are easy answers to the above issues, as they
are severely impacting on my enjoyment of using the product, and my
productivity.

Thanks for the feedback Rick. I am indeed using Captivate 1.
Re. Issues 1 & 3
Right-clicking on an object in the slide editing pane brings
up the context menu, which I have no need for in the scenarios
described above, however it does appear that I can then safely left
click anywhere on the object to complete the selection process
without disturbing the object in any way.
So a right mouse click followed by a left mouse click
resolves my issues 1 and 3 above. That's non-intuitive, two mouse
clicks instead of just one, but, in the end, achieves the
objective.
Re. Issue 2
Dragging the object up the timeline does indeed resolve the
issue. Again, non-intuitive (since the slide editing pane visually
indicates that the object is selected), more work than necessary,
but achieves the objective.
Regarding the moving of objects up and down the timeline - I
have encountered a fair bit of frustration with this too. Often
times the selected object will refuse to move up or down and I end
up selecting and reselecting it multiple times until it does
eventually behave. Is there any particular trick involved here too.
P.S. Do you trainers not regularly observe trainees
struggling with these basic object selection/manipulation issues?
Haven't these difficulties been reported to eHelp/Adobe over the
years? I would like to think that I am not the 'least common
denominator' when it comes to using software, given that I am a
technical writer who has worked in the software engineering field
for 15 years now.

Changing Object Selection

Hi SDN,
How can I change object selection for a callable Object that has its source form a webDynpro application?
eg.
Per_Address_US (from package: com.sap.xss.hr.per.us.address) to
Per_Address_IN (from package: com.sap.xss.hr.per.in.address)
Thanks,
Vamshi

Hi,
Check the following links for ESS,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
/people/srinivasarao.gv2/blog/2005/06/11/configuring-ess-in-sap-enterprise-portal-60
/people/siddhartha.jain/blog/2006/04/10/configuring-the-business-package-for-employee-self-service-ess-mysap-erp-2004
/people/sap.user72/blog/2003/08/18/going-live-with-ess

Changing Object Selection in Guided Procedures(ESS)

Hi SDN,
How can I change object selection for a callable Object that has its source form a webDynpro application?
eg.
Per_Address_US (from package: com.sap.xss.hr.per.us.address) to
Per_Address_IN (from package: com.sap.xss.hr.per.in.address)
Thanks,
Vamshi

Hi,
Check the following links for ESS,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/21eb036a-0a01-0010-25a3-b2224432640a
/people/srinivasarao.gv2/blog/2005/06/11/configuring-ess-in-sap-enterprise-portal-60
/people/siddhartha.jain/blog/2006/04/10/configuring-the-business-package-for-employee-self-service-ess-mysap-erp-2004
/people/sap.user72/blog/2003/08/18/going-live-with-ess

Why is the FORM OBJECT selection not found in the Preferences/Accessibility selection?

Hello,
I am using the Dreamweaver cs6. I was wondering why the FORM OBJECT selection is not found in the Preferences/Accessibility selection?

The engineers removed it. Why? That's anybody's guess. You'll have to add them manually. Please refer to the HTML5 forms workflow video below:
http://tv.adobe.com/watch/learn-dreamweaver-cc/html5-forms-workflow/
Nancy O.

Docs about RowSet, and Object RowSet questions?

Docs about RowSet, and Object RowSet questions?
I can find RowSet forum, so I ask here!
Can you give me URLs where I can find more about RowSet and URLs for any RowSet implementation?
Does Borlans, Oracle, IBM, etc., have RowSet implementation?
I find out about Sun's RowSet implementation, but I can't find Object Rowset in this implementation?
Is it possible to develop Object RowSet and is it useful?
I know about O/R tools like Hibernate, but Object RowSet can be useful?
Run SQL query and get Objects, or maybe even run Object query (like EJB or Hibernate or JDO have) and get Objects.
No XML mapping mess and simmilar, like with EJB or Hibernate or JDO?

You can try
http://java.sun.com/developer/Books/JDBCTutorial/chapter5.html
This is a tutorail for RowSet

OADP settings for MSS Services - Define Rules for Object Selection

Hi
Our client wants to extend MSS to all managers, and to begin with want option of "Only B002 Relationship" in drop down of Team Calendar.
I have tried all standard options but unable to find a suitable rule(Define Rules for Object Selection) which would restrict the list of employee to only B002 Relationship of Manager.
Any ideas on how to achieve it?
Regards
Yash

Hello Yash,
I think first concern here should be to make things work at your end...thus I am not focusing on your evaluation path...that you have set....
Just to kick off things so that they start work for you.....
you need to set the evaluation path as I have mentioned in my earlier reply....
These evaluation paths have been working for me...
To correct yours as per mine you need to set
ZB2 as
10 S B 002 Is Line superior of * S
and set
ZB3 as
20 S A 008 Holder * *
Now if still things does not work then...you need to check the Tcode PPOM_OLD and see if the correct reporting relationship (B002) exists for the logged in user.....
These evaluation paths are very confusing for me.....and so I am not trying to correct what you have set in ZB2 and ZB3....
And also note that there can be more then 1 way to achieve your goal with evaluation paths.....
Yash here on we will focus on this thread only.......Let Upendra clear his doubts with that thread.....right..?
Object and Data Provider evaluation path to get subordinates.
Edited by: Saurabh Agarwal on Jul 24, 2011 7:44 AM

HR Infosets - switch object selection question?

Similar Messages

Maybe you are looking for