Switching off selected devices

Hi, I wonder if anyone can help. I have a BT Home Hub 3 and I heard that you can switch off selected devices at various times of the day, i.e. switching off my son's xbox without the rest of the familiy suffering with a lack of internet. Is this facility available with the home hub 3 or would i have to upgrade to a newer system.
Thanks

Have a look here:
http://bt.custhelp.com/app/answers/detail/a_id/113​64/related/1
Hope this helps
If my post has been useful, please click on the Ratings star on the left-hand side of the post.

Similar Messages

  • DEVICE SWITCH OFF EVERYTIME FREQUENTLY NOW...

    Dear Concern,
    As its  is a serious concern now after so many refernces i have to write the mail , i got curvw 9220 device and i am using bb from last five years as i have to be mail connected everytime , so i switched to this new curve 9220 persisting the same problem in my old handset 9320,
    >the device get switch off everytime you recieve any calls or if any mail to open or any application installation ,
    >and moreover when ur in between calls it get switch off ,
    > the device shows battery loss on full charge and get s off it shows radio signals off.
    > 
    i am totally dependent on this phone and what to say its now its a nightmare for me i really getting fed up from bb , the thing is that i am a ceo of a firm and to sort out many calls and mails frequently i have ti stay connected evrytime  and if this type of service i get from the company like bb i will be very much feeling low on the part ......if any one can help out ...i have also mailed on the support for the same my request no is : INC000027333360   

    Hi and Welcome to the Community!
    First off, to set your expectation correctly, please see this "sticky" post, along with the threads to which it links, for helpful information to guide you as you proceed:
    http://supportforums.blackberry.com/t5/Social-Lounge/How-This-Site-and-Formal-Support-Work/td-p/2540...
    Hopefully, this information will be of use to you.
    Concerning your specific issue, please try this sequence...note that, throughout the entire 4h15m process, your BB must remain directly connected to a known-good wall charger (not PC USB, not a cradle):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain an known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem. Note carefully please that "new" and "know good" are not necessarily the same things. While rare, a "new" battery certainly could be defective. Rather, the simplest (and least costly, btw) method to conduct this test is to find someone with an identical BB who has no issues...trade batteries and see what happens.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Z30 will not switch OFF!

    I have this error message displayed - www.bberror.com/bb10-0015 - on my Z30.
    So the screen is black (looks like it's off), but when i start the reload process in BB Link (with device connected), i get a message asking me to switch off the device. It will not turn off. If i hold the 'off' button down, it just starts up again and then displays the error message once more. What can i do?

    Ben2 wrote:
    1. How do i find out which exact model my BB is? Because it will not switch on to let me go into settings etc.. As i say, although it won't switch off, it won't allow me in either - just get that error message.
    Remove the back cover. At the bottom behind that cover is a label with a lot of tiny print on it. In that print will somewhere be STA100-something...that "something" is what determines your exact Z30 model number.
    Ben2 wrote:
    2. I cannot do a backup either because of above.
    Like insurance, the time to take a backup is before problems happen. It is a hard lesson to learn, but one should never allow an update to a computing device to begin unless one has a full and complete backup in hand. Further, a regular procedure of taking backups is always recommended so as to minimize the loss of data should a catastrophic failure happen.
    Ben2 wrote:
    Finally, with the state i have described, will the autoloader run?
    I cannot predict the outcome of making the attempt. I can, of course, predict the outcome of never trying at all. You may have to experiment with timing of starting up your BB, connecting it to your PC, and launching the AutoLoader. Given the condition of your BB, you may have to try a few tricks with different timings of those actions. But AutoLoaders are pretty forceful...generally, if power is flowing through the BB at all and the display is doing anything at all, then the AutoLoader can attach to it and conduct it's process.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • BB Device Wont Stop Switching Off & On

    Hi!   HELP!!!
    My BB suddenly started switching off and on. When I remove the battery nothing happens it just goes back to the same thing.  I loads up thye security verification and then switches off.  When I call the phone nothing comes up.  Earlier this morning my phone rang then switched off...then later on I heard the alert for the voicemail.  Now it just wont quit.  Any ideas?  I've had this for 9mths, and its just started this.  Thanks for all help.

    Hi pike 13
                           Yes you can reset to factory setting ,But I prefer to reload your Device softwareBut if you do that without a proper backup you will lose all your data and application.Install BlackBerry Desktop software from here BlackBerry desktop software and do your backup. But I prefer to reload your Device software .Then you can try this :
    KB11320 : How to perform a clean reload of the BlackBerry Device software using BlackBerry desktop software for windows 
    Or as you want How to reset the BlackBerry smartphone to factory defaults or you can simply do it on your handheld like this On your Home screen - Options - Security - Security wipe -Select the appropriate check boxes to remove data and applications as intended - Type blackberry, and click Wipe Data .
    ( I prefer security wipe as the last option )
    Prince
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • How can I delete e-mails from one IPad without removing them from other IPads on same icloud? I'ved tried switching off mail sync on all devices but this only works when deleting on IPhone

    We have several portable devices and a mini mac on our system and have found that if we delete an email on one device it is removed from others.
    We don't want this, but at the same time we need to keep our devices clear of clutter.
    It was suggested that switch off the sync mail switch in settings - Icloud, but this only works on IPads & Ipods
    anybody got any better ideas ??

    We have several portable devices and a mini mac on our system and have found that if we delete an email on one device it is removed from others.
    We don't want this, but at the same time we need to keep our devices clear of clutter.
    It was suggested that switch off the sync mail switch in settings - Icloud, but this only works on IPads & Ipods
    anybody got any better ideas ??

  • Verizon BB 8830 WE Unlocked Shows Connected to GSM but can't make or receive Calls (Calls to the no says Device Switched Off)

    Hi!
    I bought a new Verizon 8830 World Edition unlocked from ebay. I confirmed that its unlocked from MEPD command (although it says Network: ''Inactive'' instead of 'disabled').
    I tried using various GSM network SIMs (India) in it and everytime, it shows an active tower and full signal levels and displays the name of the network correctly. It looks as if its connected to the GSM service at full signal.
    However, placing calls fail and any call made to the number gives a 'Switched Off' message. 
    I am totally flummoxed and don't know what to do.
    I have tried: Battery pull & Wipe out. 
    About: v4.5.0.186 (Platform 3.4.0.59)
    I would be very very very thankful for any pointers. Please help me!

    Hi Subhankar,
    The Connections are ON, the Network Selection is Automatic and the Mode is GSM
    The Connection is showing 'Connected', with Antenna and Full Signals, with the Name of the Network too.
    I have tried disconnecting and reconnecting, pulling the battery many times. However, calls are not successful and the number remains 'switched off'.

  • How to switch off iTunes match on my device

    id like to switch off iTunes match on my device

    With iTunes Match enabled on an iOS device traditional syncing of music via USB of via Wi Fi is disabled. This only applies to music. Ringtones can be synced normally.
    To turn off iTM on the iOS device go to Settings > iTunes and App Store and set "iTunes Match" to OFF (not green).

  • My iPad screen is totally frozen with a message box asking me to go to photo stream settings but when either option (ignore or settings) is selected nothing happens. I can't turn off the device either because the screen won't respond. Help please

    My iPad screen is totally frozen with a message box asking me to go to photo stream settings but when either option (ignore or settings) is selected nothing happens. I can't turn off the device either because the screen won't respond. Help please

    Try a reset:
    Hold the Sleep and Home button down for about 10 second until you see the Apple logo.

  • Switch off default selection in partners pop up

    Hi Experts,
    In case of one sold to, multiple ship to, system gives a pop up with list of ship to parties. But by default selecting the first ship to, with tick mark. Is there any possibility to switch off the system default selection in partner functions pop up.
    Points assured for helpful answer.
    Thanks
    Sunanda.P

    Hi Sunanda,
    If you do not want a pop-up to come up everytime you create a sales order then you can simply delete all the ship to party's from the customer master, once you delete all the ship to party's in customer master you can manually select your desired ship to party at the sales order level only.  This is the best solution without disturbing the standard configuration.  Hope im clear with your query.  Either of the two you can use, both the functionalities cannot be used simultaneously, if you want to use both these then you may have to design a user exit.
    regards,
    US

  • TS4209 When i wake up my iMac from sleep my wifi is disconnected.  It also disconnects my iPad, my wives iPad, my iPhone & Sky On Demand which is connected via wifi. To reconnect all devices i have to switch off & then on again wifi on the iMac. Can anyon

    When i wake up my iMac from sleep my wifi is disconnected.  It also disconnects my iPad, my wives iPad, my iPhone & Sky On Demand which is connected via wifi. To reconnect all devices i have to switch off & then on again wifi on the iMac. Can anyone help?

    Had the same issue and finally solved it.  After the upgrade to Mavericks our 2 new Macbook Airs stopped connecting automatically to Wifi while the older machines the kids had still worked fine.
    Bought a new airport extreme and problem solved.   Our Airport Extreme was about 5 years old and was probably not compatible with the new OSX.
    BTW this was after trying everything people suggested on this forum and a 4 hour marathon tech support call with Apple where we reinstalled the OSX.
    ***** to need to spend $200 but glad the problem got solved.
    New extreme is also mega fast so its all good.

  • Am using provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down bef

    I  am using 2 unit provided AC charger to charge my iPad mini. After a while, I checked the device. The battery is no longer in charge mode. It is only 80% charged. When I touch the AC charger, it is hot. I need to switch off the AC charger to let it cool down before continue to charge my iPad mini again. Of course it will be 100% charge but must make sure the AC charger is cool down completely. 
    I feel that the provided AC charger that is not suitable for our charging on iPad mini.

    I would book an appointment at an Apple Store, if you have one nearby, to have it looked at.
    Genius Bar: Preparing for Your Apple Store Appointment

  • Blackberry z 10 device switch off automatica​lly once it battery reaches to 20%

    Hi team ,
    happy week end .
    I am using the blackberry z10 running on 10.2.1.537 updates The issue is once the battery reaches to 20% automatically device get Turns off ,later i should charge the battery then it get switch ON.
       please  help me in finding the solution.
    Thanks & Regards,
     karthik.M

    The same problem was with my Z10. It was getting switched off at 20% battery. I charged my phone battery upto 100% and then removed battery keeping wall charger connected and inserted again after 1-2 mintues. The phone restarted and it started charging from 97%. It took another 20 minutes to charge 100% again. After getting 100% again I did the same and this time it started charging from 98%. The same thing I repeated 4 times and believe me when my Z10 was at 20% battery today, it did not turned off. I kept watching on this. Everyting was fine. I started charging at 9% again.
    But blackberry should address this issue. Atleast some KB should be released.
    S. Jangra

  • Device get Automatically switched off and unable to turn on ...

    Hi experts,
    I wish u happy new year to everyone..
    I am facing a critical issue in my bb torch 9860,device get automatically switched off and unable to turn on the device by switching the power button .after doing hard reset it turns on ....iam missing calls .please help me how to trouble shoot it

    It's obviously a software issue so I suggest jumping right to an OS reload.  Battery pulls are always a good place to start but after that you should reload the OS.
    To do this, plug your phone in to your PC and open BlackBerry Desktop Software.  Click Device at the top of the software then Restore.  Choose the most recent restore point and load it.
    Let us know if that helps you. 
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • Howto switch off: Jump to selection

    Hi,
    I'm using Flash Builder Version 4.0.0.235740 on Windows Vista.
    When I doupleclick a variable in the AS3 code all other equal variable names are selected automatically. This is a nice feature. But when I use i.e. the scrolling to modify other code parts the screen always scrolls back to the previously selected variable. This causes a lot of failures as I'm not always on the screen.
    Is there a possibility to switch off this auto scrolling feature?
    Thanks. Kind regards,
    Viktor

    Is this a rare or unique problem I have described or could it be that it is related to the Eclipse plattform?

  • HT1414 my iphone I5 with latest OS 7.0.4 switched off interminately and I have to hardboot the device again

    my iphone I5 with latest OS 7.0.4 switched off interminately and I have to hardboot the device again. is there any solution?

    Try to set it up as new device without using the latest backup, in case the backup contains corrupt data causing this. If it works after that, restore from the latest backup to get your data and settings back.
    How to back up your data and set up as a new device

Maybe you are looking for