HR Master change Download using PU12

Hi All,
I am trying to download HR master data change to an external sytem..using pu12.
Please let me know ..How it is possible to generate idocs with PU12.
Thanks & Regards,
sajid

Hello,
I had a quick look at the transaction. I have not worked on HR related stuff.
But my analysis may help you. I made a global search for 'IDOC' in the Program 'SAPMPU12'. There are 2 places where IDocs are triggered.
* menu bar fcode's
    WHEN 'IDOC_CREATE'.
      SUBMIT RSEINB00 VIA SELECTION-SCREEN AND RETURN.
    WHEN 'IDOC_PROCESS'.
      SUBMIT RBDAPP01 VIA SELECTION-SCREEN AND RETURN.
    WHEN 'FILE'.
      CALL SCREEN 3120 STARTING AT 20 5.
Hope these points give you some idea. Or other friends who have worked in HR will be able to help you.
check the link (Interface Toolbox):
http://help.sap.com/saphelp_erp2004/helpdata/en/d8/c9e93401bdee06e10000009b38f83b/frameset.htm
Best Regards, Murugesh AS
Message was edited by: Murugesh Arcot

Similar Messages

Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.

Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.
== This happened ==
Every time Firefox opened
== A week or two ago. Not sure if result of most recent update.

Downloads used to open after download. NOw they just end up in the download folder and I have to go to the folder to find it and open it. I did not change seettings, maybe an update changed it? I cannot find a way to change this in settings.
== This happened ==
Every time Firefox opened
== A week or two ago. Not sure if result of most recent update.

Change Customer master Address Data using Structure biadd2 in report rfbide00.?

hello
i want to change Customer Master Address Data using using RBIDE00 report program but when i execute the report it will accept input from batch file
but the same is not getting updated in customer master .
please help me to resolve this issue .
thanks & regard
laxmikant soni

Found the answer from SDN - not possible unless using some BUS.
RFBIDE00 - Address data issue
Thread closed.

I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?

I changed my itunes password only and now I can't update any of the apps I downloaded using the old password. I tried signing in with the old password with no luck. Can someone help please?

Have you signed out of your iTunes account on the device/computer that you are using and signed back in with the updated password ? That should 'refresh' the account on it, and you should be able to use the account's new password to download updates to its apps

I can't download using whenever I do the safari always demand for mine payment system and I don't have credit card or master card

I can't download using safari, it always demand for billing system n I don't have redit card or master card so what do I do?

You cannot download using Safari at all on the iPad so I'm not sure what you are trying to do. You can only download content from one of the Apple Stores on the iPad - iTunes, the App Store or iBooks.

Customer master changes using DEBMAS/ DEBMAS-03

hi All,
Following is the scenario/ requirement:
My client wants to use the standard Msg type DEBMAS and basic type DEBMAS03.
We want to activate change pointers for the msg type. However, in the existing business, there would be lot of changes per day i.e. ~ 10 changes per day--which would trigger 10 IDocs. I want to put the partner profile in collect mode. However, I want your help in checking if its possible to collate / combine all the 10 IDocs and put it into 1 IDoc and send it at the end of day?
If so, would also request a possible draft solution road map.
Am sure, there are experts out here who can share their valuable inputs.
Fast responses will be highly appreciated.
Regards,
Raghu.

Hello,
It would be again a lot of work in terms of coding and designing the IDoc Structure again.
It should not be a problem while sending Customer Master changes using Change Pointers. As you said, you can set the Partner Profile Configuration to Collect IDocs and send it at the end of the Day.
Thanks and Regards,
Venkat Phani Prasad Konduri

Question on "Master Detail page using ADF" sample

I downloaded the "Master Detail page using ADF" sample application. I modified editDepartment.jsp page to include the Commit button as follows:
<html:submit property="event_Commit">Save and Commit</html:submit>
When I go to edit a department record and click on the new "Save and Commit" button, I SQLed the DEPARTMENTS table and noticed that the edits were not commited. I also restarted the embedded OC4J server and still get the same results. For some reason, the department view object contains the modification but the entity object doesn't. Why?

Scott,
My colleague suggested a workaround, which is to explicitly include the detail table's id in the master table's partialTargets list. So, for example, in MasterDetailDP.uix, changing:
<table model="${bindings.DepartmentsView1}"
       id="DepartmentsView111"
       partialRenderMode="multiple"
       partialTargets="_uixState">to:
<table model="${bindings.DepartmentsView1}"
       id="DepartmentsView111"
       partialRenderMode="multiple"
       partialTargets="_uixState EmployeesView312">...will cause the detail table to be updated when sorting the master table.
There is some question about whether sorting a table should actually cause the currently selected row to change - we're still discussing this point.
Andy

Accessing material master change information

We have a requirement to pull all changes to material master records by month. I know that I can hit the CDHDR and CDPOS tables using CHANGEDOCUMENT_READ_HEADERS and CHANGEDOCUMENT_READ_POSITIONS functions to pull this; however our change tables are so huge that the program is timing out. Running in background does not work either because the spool request only shows a few of the pages (10, I think) where the document is actually over a thousand printed pages. I can't email the spool request either because the file is too large.
My question is...is there an infostructure that only contains material master changes (as opposed to all changes as in the CDHDR and CDPOS tables?) I know that when you go into MM03 and view materail master changes they pull up really quickly. Is this program hitting something else rather than the CDHDR and CDPOS tables? How do they pull up so quickly even if there are many changes.
Thanks in advance.

>
SDW wrote:
> I know that when you go into MM03 and view materail master changes they pull up really quickly. Is this program hitting something else rather than the CDHDR and CDPOS tables? How do they pull up so quickly even if there are many changes.
>
That's the beauty of having the option to debug a program. Wondering how SAP reads the data fast: go debug!

Vendor Master Change Log Details

Hello All,
As I have changed the vendor master data on last May-09. But the changed master data is wrong.
So I'd like to reset the vendor master data to the original value.
Therefore, could you please let me know how to check the vendor master change logs ( i.e with the use of any t-codes or tables ), and how to identify the original values ( i.e before changing ).
Best regards,
Kesav

You can see in Xk02 / Xk03 transaction - Environment tab - Field changes..

Need BOR & event which triggers after vendor master change.

Hi all.
Can you pls let me know the BOR & event which triggers after vendor master change. (Xk02). I used tcodes SWELS (evetn trace) , and SWEL and changed vendor adress using XK02. but I could not find any event or BOR in the trace. Pls help me out.
Cheers,
sam.

Hi
when we change the vendor details we dont have the event which is automatically triggered by the system so we create an zbusinessobject as subtype for the vendor(LFA1) as supertype.
and create a new event in that z business object .
change document for the vendor is KRED you can check it in the CDHDR table by giving tcode name.
after finding changedocument object go to SWEC and create a newentry specifying your changedocumentobject name and BO name and event name and click on radiobutton onchange.
and now you can check whether an entry is getting in swels or not when changing the vendoor details.
Thanks.

Email upload in vendor master change

Hi all,
I have to do emails upload in vendor master change but when i do through shdb recording i am not able to see the communication screen to enter the values. Can any one of you please guide me step by step.
Thanks & regards,
Kumar

Hi,
you have to use table BAPICOMREM. Just go to one testing customer and add email address with note to this customer. Then go to SE37 and call BAPI BAPI_ADDRESSORG_GETDETAIL. This BAPI has same structure as BAPI_ADDRESSORG_CHANGE. Hence you will see how you have to fill all structures to change email address and also note.
Cheers

How BBPUPDVD determines vendor master change in ECC?

Hi Experts,
How is the vendor master change in ECC captured and what is the strategy/check that the BBPUPDVD transaction OR vendor update report uses/does in ECC to pick up the updated vendor with qualified fields for transmission?
Qualified fields -> Purchasing block, curr change, comm method change, etc.
For e.g, if a vendor is blocked for a P.Org today and if we either execute BBPUPDVD OR vendor update job, so how does it determine the change in vendor master in ECC?
Thanks!
Regards,
Karthik

Hello Karthik,
just to complete what wrote Konstantin, those change documents are determined in ECC using CHANGEDOCUMENT_READ function modul inside BBP_SCAN_VD function modul which is called by RFC from SRM (report BBP_VENDOR_SYNC).
Regards.
Laurent.

Table name for material master change

What is the table name for material master change, so that I can get the old values and new values at plant level.
More specific:
I want to check the old values for Re order point and Safety stock in MRP1 and MRP2 fields in material master for many materials. Please help.

Use CDPOS and CDHDR table to get the values which were changed.
CDPOS>use fields Change doc. object give in as MATERIAL and in the Table name>MARC

I am no longer able to change songs using my headphones

After updating to iOS 6.0 on my iphone 4S I am no longer able to change songs using the headphone controls and when i double click on the home button it no longer allows me to turn my music on and off without unlocking the screen and going into the music app on the phone.
Any ideas why this is? Is it a known bug?

Start by opening Disk Utility, from Applications > Utilities, then select the internal storage MacIntosh HD, and then Repair Permissions. You should see some printer libraries noted as having the wrong permissions, that may be part of the problem.
Be sure you have the latest printer/scanner drivers installed by going to the Canon site and download the latest available.
You can also try using the Mac OS X built-in scanning software by going to Applications > Image Capture and see if that handles the scanning for you - works great with my Epson scanner.

Vendor Master Changes updation

Hello SAP Guru's
I am developing a Smartform for Vendor Master Changes.
My requirement is at top i wanna print the date when the Vendor's Master data was changed. I dont wanna capture the date when the smartform was executied.
once again i am requesting you that i wanna capture the Vendor Master Changes date on to the Smartform. Please help me.
Its urgent.
Also if anyone knows or have any documentation with step-by-step screen shot for Adobe form creation please send to my personal id.
vamshis@drreddy's.com
or
[email protected]
Points will be rewarded for everyone.
thanq
vamshi

Hi Vamshi,
You can use the field<b> udate</b> from table CDHDR .I am referring to this as we can see this feild in report S_ALR_87012089 which gives the date of last change in vendor master if you give the vendor number in the selection screen.So what you can do is that you can pick the values from it..
Reward points if useful...
Cheers!!!
Pankaj Sharma

HR Master change Download using PU12

Similar Messages

Maybe you are looking for