HR Master Data Enhancement using BAdi RSU5_SAPI_BADI.

Hi Experts,
I am trying to use first time BAdi 'RSU5_SAPI_BADI' instead of RSAP0001 for enhancing HR Master data. I have enhanced the structure and I have created implemention method for BAdi and activated fine. Then I am not sure about the next step, I did search SDN but this point is not clear. Where is the link between these two things between Structure and the method, how is it called to populate the data. Because When I run RSA3, it shows my new field with blanks. So I am missing some thing that integrates. IF some one has implemented this please let me know. Your help is appreciated.
Thanks!
Moorthy
I was able to populate the new fields only when I use the structure in one place ie in BAdI. I mean, two fields were populating using user exit and I was trying two fields using BAdI for the same structure. When I tried all fields from BAdI only then it worked. So is my assumtion correct that we should either use user exit or BAdI for the same structure?
Message was edited by:
Moorthy

Created one method for each datasource and is working fine.

Similar Messages

Data source enhancement using BADI

Hi,
We had a 2LIS_* extractor which is enhanced with ZZ fields.
I look for the sode in CMOD which i couldn't able to find any
My assumption is the data source is enhanced using BADI.....As i am not familiar with BADI's how can i create for my data source enhancement code in BADI
Thanks

Hi ,
Not sure on your question.
Is the Enhancement already done and you want to check whether it is done in BADI/CMOD.
Or
You want to populate the Data using BADI/CMOD.
In any case you can use CMOD or BADI to populate the data ,the recomendded is BADI which can be created in SE24..you can google for some Docs on its creation and steps to be followed.
And if tis CMOD you have to create a project and then write the code and for that also there are DOcs avaliable.
Rgds
SVU

Data source Enhancements Using Badis

HI gurus,
Can you please let me know the process in detail to implement the data source enhancements using badi's.
Please provide me the step by step proceedure.
Appropriate answer will be highly rewarded.
Thanks,
Shashikanth.

http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
I have a few links for u! Just download the documents and have a reading. You will get an idea:
http://www.esnips.com/doc/e06e4171-29df-462f-b857-54fac19a9d8e/ppt-on-badis.ppt
http://www.esnips.com/doc/43a58f51-5d92-4213-913a-de05e9faac0d/Business-Addin.doc
http://www.esnips.com/doc/10016c34-55a7-4b13-8f5f-bf720422d265/BADIs.pdf
http://www.esnips.com/doc/1e10392e-64d8-4181-b2a5-5f04d8f87839/badi.doc
/people/thomas.weiss/blog/2006/04/18/how-to-implement-a-badi-and-how-to-use-a-filter--part-4-of-the-series-on-the-new-enhancement-framework
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4493c4a6-0301-0010-62a2-efd6ded61e04
Reward points if helpful
Regards
Edited by: Aadil on Jan 23, 2008 8:42 AM

Identifing duplicate master data records using the MDM Import Manager

hi all
I read the Topis "How to identify duplicate master data records using the MDM Import Manager"
i tried to create import maps and to set rules. but when i import them it creates the new vendor records for each rule with rest of the fields blank.
when i import vendor data all the three fields i.e Match rate , match type and match group are blank.
My Question is :
I am getting vendor data from SAP R/3.
In which source (in lookup xml file or data xml file) do i have to include these above three fields and how all the rules will be reflected in repository?

Hi Sheetal
Here we go when do you Import any data (vendor master) please follow the following steps;
1. First of all apply the map to the source data
2. In the Match Record tab there are 3 possiblities
 a.[Remote Key] : Checks the current source rec with
 repository along with all the fields - This is
 default
 b.Remove [Remote key] - by double click the same; and
 choose any single fields like Vendor Number or
 name - Then the current record will be matched
 with the repository based on the field.
 c.Instead of single field you can choose combination
 also.
3. Based on the Match results, match class will be set
 automatically;
 a. None
 b. Single
 c. Multiple
4. Then Match Type
 a.Exact-All the individual value matches are Equal.
 b.Partial-At least one value match is Equal and at least one Undefined; no value matches are Not Equal.
 c.Conflict-At least one value match is Equal and at least one value match is Not Equal.
5. then chek the Import status and Execute the import.
Hope this helps you.
cheers
Alexander
Note: Pls dont forget reward points.

Can we restrict a master data characterstic using another master data chara

Hi All,
Can we restrict a master data characterstic using another master data characterstic, if they were both compounded together. There are two fields viz.., A,B in r/3 master data table in which A and B combinely serve as a key. In BW side i have created a master data object for A and compuded object B ot it. So that i am getting all the data from r/3 table. But in query designer when i am trying to restrict object A values by object B, in a structure i am not getting any data. If i do same out of structure i am getting data in report. Please help in overcoming this problem.
Regards,
Rajkandula

Hi,
Yes it should display data, but it is not displaying. If i am doing the same restriction out side of a structure i am getting data. But whilr trying to do so, i am not getting that. The reason why i am bothering about structure is 'Objext B have 10 different values and i want 10 coloumns in report in whicg Obj A must display respective data when i restrict it by B' , whicg i can do this only if i use structure else i can't restrict B that many times .
I hope u got my problem and plz give help me in this.
Regards,
Rajkandula

MDM Material Master data creation using Guided Procedures

Well, i searched a lot on the forums but didnt get any thing.
My requirement is to use MDM Java APIs for creating material master data using Guided Procedures. However, i got one nice document "[How to create master data centrally using guided procedure|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/92811997-0d01-0010-9584-f7d535177831]". This doc discuss about business partner creation and also have a link to downloadable file. But now when i click on this download link, it says download expired !
Can anyone please post a valid link to these deployable files?
Or anyone could post some usefull materail or links on the above mentioned requirement?
Kindly reply, any help will be highly appreciated.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:29 AM

Wow, that was indeed a quick reply i have ever got on SDN. Thanks for the excellent link jitesh. However, where will i get the deployable files that it selects in the Import GP/CAF contents step of the demo? those are the webdynpro components files. One is SCA and other is SDA. Where will i get them?
Kindly post the link to those files if u have them or else send it across.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:53 AM

Master data sharing using ext. star schema

Hi,
I have undetrstood the concept of extended star schema.
I understand,
One of the advantages of extended star schema is, that the master data can be shared, meaning, since the master data is stored separately, other star schema's can also share this master data provided it is of the same relevance( with same infoobjects used in this star schema).
Confirm if my understanding is right and if right,
Any idea or suggestion how to demonstrate this ?
Points will be given for good answers.
thanks.
bwlearner

Hey,
If u could map this with programming.
MASTER DATA Tables are like GLOBAL declaration and InfoCubes (Fact Tables) are like LOCAL declaration. Any number of IncoCubes can access one particular Master Data Table.
Assume Sales data coming from 5 regions. Here 0CUSTOMER & its attributes will update the same Master Data Table. The data fields will be stored in the Infocube. So all the 5 InfoCubes access the same Master Data tables using the Dimension & SID tables.
Clear ?
Best Regards....
Sankar Kumar
+91 98403 47141

InfoUser Master Data Export using scc8

Hi Team,
Iam doing User Master Data Export using scc8 .I have 1 question regarding this:
1)When i took export using scc8 only 1 TR is created in cofiles folder and i cant see that TR in data-files folder.
Can anybody help me in this??
More info:
We are going to rebuild the system so we need to preserve the user master record data.
Regards,
Abhilash
Edited by: gundala$ on Feb 29, 2012 8:10 AM
Edited by: gundala$ on Feb 29, 2012 8:10 AM

Hi,
Kindly go through the following link.
http://forums.sdn.sap.com/thread.jspa?threadID=1310350
Anil

Creating Master Data Centrally Using Guided Procedures

Is it possible to create master data centrally using GP say for example creating Material master data without using MDM? Is there a stand out of box delivered scenario exist without MDM. I did see the article Create Master Data Centrally Using Guided Procedures but it uses MDM.
Any help appreciated.

Wow, that was indeed a quick reply i have ever got on SDN. Thanks for the excellent link jitesh. However, where will i get the deployable files that it selects in the Import GP/CAF contents step of the demo? those are the webdynpro components files. One is SCA and other is SDA. Where will i get them?
Kindly post the link to those files if u have them or else send it across.
Regards,
Ameya
Edited by: Ameya Pimpalgaonkar on Sep 27, 2008 11:53 AM

[Enhancement in BW]: How to use BaDI : RSU5_SAPI_BADI

Hi Everybody,
Right now, could you kindly please tell me how to i use customer exit but using BADI, particularly for BADI : RSU5_SAPI_BADI.
I just wanna use the customer exit on variable (variable user-exit).
So far i've tried these steps (might you correct me/advise):
1. tcode : SE18
2. Enter the Badi Name : RSU5_SAPI_BADI
3. (Toolbar) enhancement implementation -> Create
4. ... (After that i don't know what i've to do ..)
Could you tell me step-by-step to make it ?
Such as what i should fill-in for Implementation Name and any parameter should i fill in there and how to debug it ???
Many-many thanks all for the attention.
Hopefully i can make it :).
Kind regards,
Niel.

Check out this link:
<a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7">https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/3001894b-b1fb-2910-77ba-e80b6f2053b7</a>

Reporting on master data customer and bad performances : any workaround ?

Hello,
I've been asked to investiguate on bad performances encountered when performing reporting
on the specific master data zcustomer.
Basically this master data has a quite similar design that 0customer, there are 96000 entries in the master data table.
A simple query has been developed : the reporting is done on the master data zcustomer and its attributes : no key figure, no calculation, no restriction ...
Nevertheless, the query can not be executed .. the query runs around 10 minute in rsrt, then the private memory is exhausted and then a short dump is generated.
I tried to buid a very simple query on 0customer, this time, without the attributes ... and it took more than 30 sec before I get the results.
I checked the queries statistics :
3.x Analyzer Server 10 sec
OLAP: Read Texts : 20 sec
How is it that it is so long to performthe reporitng on those master data, while in the same time If i try to display the content in SAP by choosing "maintain master data", I have an immediate answer.
I there any workaround ?
Any help would be really appreciated.
thank you.
Raoul

Hi.
How much data have you got in the cube?
If you make no restrictions, you are asking the system to return data for all 96.000 customers. That is one thing that might take some time.
Also, using the attributes of this customer object, fx making selection or displaying several of them, means that the system has to run through the 96.000 records in masterdata to know what goes where in the report.
When you display the masterdata, you are by default displaying just the 250 or so first hits, and you are not joining against any cube or sorting the result set, so that is fast.
You should make some kind of restriction on other things than zcustomer (time, org.unit, version, etc, to limit the dataset from the cube, but also a restriction on one of the zcustomer attribs, with an index for that maybe, and performance should improve.
br
Jacob

Generate Master data IDOC using report-RPCEMDU0_CALL (Tcode-PC00_m10_OTEM)

Hi All,
Can anyone please explain me the functionality of report RPCEMDU0_CALL (Tcode-PC00_m10_OTEM). This is used to generate master data idocs. Any documentation would be really helpful.
Also is there any way to alter the idoc data before sending. Please let me know.
Thanks in advance.
Regards,
Priti Thakur

Standard Doc[ for this transaction.|http://help.sap.com/saphelp_erp60_sp/helpdata/EN/f6/2318b13cf011d2a62900104b56737d/frameset.htm]
There are few threads in SDN and ittoolbox to discuss about the problems but nothing much!
To alter the format...explore the program. You can use the "Enhancement" part to add your custom logic to add columns to interface internal table. To access the enhancement...go to the program and press the 6th button from left ..the swirl button or press Shift + F4. Then activate enhancements ...to do the necessary coding as required.
Also try the user exit:
Note 1515497 - OT: Selection of a Provider - Customization User Exits
As per this note, there is a contact info of SAP Developer...if the note and the info is helpful and you need help related to that note or that functionality contact them.
Edited by: Amosha on Jun 22, 2011 10:31 AM

CRM Datasource enhancement using BADI

Hi Guys,
There is a lot of confusion among our BW community here about the implementation of the "CRM_BWA_MFLOW" BADI to enhance the datasources. It would be a great service is someone can clear the fog on this.
The steps that I followed in doing this are
1. Appended the standard datasource structure with the additional fields that need to be populated.
2. Unhid the fields in the transaction RSA6.
3. Created an implementation of the BADI "CRM_BWA_MFLOW" and tried to map the fields to the append structure.
This is where I am stranded. How do we map the fields from the BDoc to the append structure fields. If someone can provide with a sample code with some documentation, that would be a great help for many of us here.
I have earlier implemented the User exit to enahnce the datasource but it really is a big pain, especially when you know that using the BAdi can be easier.
Really appreciate your contribtion.
Doniv

hi,
sample code can be found in the BadI, somewhere go to or utility - sample code, it seems quite similar with old zxrsau01. sap gave us note 850817 when suggest using BadI for certain case, take a look :
850817-CRM-BW: Using BDocs for the enhancements in BADi
https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012006153200000232372005
692195-FAQ: Sales Analytics and CRM-BW data Extraction
https://websmp103.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=012003146900000332772003

Step by Step Master Data Enhancement

Can some one provide more information for generating Master Data from SAP R/3 system
thanks

Hi......
What do you mean by generating Master Data from SAP R/3 system.......did you mean loading master data......
If so.........then.....
1) First create master data datasource in RSO2......or use standard one....
2) replicate it......
3) create infopackage and load data till PSA.......
4) Insert the infoobject in the Infoprovider tree on RSA1......to do this in the Infoprovider tree right click on the desired Infoare >> select Insert Characteristic as Infoprovider..........
5) Then create transformation between PSA and Infoobject.
6)create DTP and load data..........
If you mean Datasource Enhancement.........then check this.....
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0af763b-066e-2910-a784-dc6731660f46
http://sapbwneelam.blogspot.com/2008/10/sap-bw-data-source-enhancement.html
Hope this helps........
Regards,
Debjani...........

Master Data Text Used as Line Items in ODS

Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!

Hi Simon, 
Thanks for the reply! 
First of all, yes, I think we are on the same page regarding what I want to do... I have created a master data infoObject in BW, created a customized extractor in R/3 under CO-PA-IO node, and mapped them to each other in BW such that when i execute a package in InfoSource in BW, i am able to load master data text in InfoObject Rev Type in BW. 
Kindly explain more on "you should have created the revenue type as a text datasource and loaded the data into the text and not the master data". Do you mean to say that I should have just created a regular datasource (i.e. Flexible Update in any Data Target InfoSource), rather than a direct update of Master Data datasource? 
However, if this is what you meant, please remember that for other characteristics such as Sub Product A, B, Product Lines, Sales Region, Business Center etc. (as seen in FS10N tcode per GL), are reflected in ODS per line item, and they are setup as master data. So I was thinking maybe i just missed a step in mapping. 
Is this what you meant? My main goal is to be able to have the line items i load in ODS be matched to the particular revenue type for that GL's profit center (seen in FS10N tcode in R/3)
Thanks again.

HR Master Data Enhancement using BAdi RSU5_SAPI_BADI.

Similar Messages

Maybe you are looking for