HR Renewal Functionality

Hi Experts,
Our client just upgraded from EHP4 TO 6 with HR Renewal Pack. Now the client want to use the new SAP forms functionality provided by EHP6/HR Renewal and want a new application to be built on this. Client is still using Home Page Framework(HPF) for its ESS solution. Now the question is will the new SAP forms functionality work with HPF? Also the Portal version is 7.01. Kindly Suggest whether this is feasible or not seeing the client is neither using portal vers 7.3 nor Launchpad Framework?
Thanks & Regards
Sahil Kohli

As far as I understand the new WDA start application i.e. ASR_PROCESS_EXECUTE_OVP - which is capable of launching both Adobe and FPM based form ; works based on launchpad configurations.
Some one from SAP - could comment on this?
However it should sill be possible to tweak it to work.
For details of the application refer here:
Adding Processes in Launchpad Menu For HR Administrators - HR Administrative Services (PA-AS) - SAP Library
Regards.

Similar Messages

LRT224 WAN IP Release and Renew

I am trying to debug an issue where my internet performance drops to nothing after about 18 hours of operation. I have bypassed the LRT224 for several hours and my cable modem seems fine. So now I am focused on the LRT224.
When I log into the router and try to release and renew the WAN IP. It will release just fine but will never renew and get a new IP.
A couple of weeks ago I upgraded the firmware to the latest on the website. However, I just did an upgrade in place and did not go through a factory default reset.
The internet performance issue seems to happen when I run the heck out of the connection using encrypted traffic.
Questions
1) is there a problem with the release/renew function in the latest firmware?
2) should I do a factor reset and reconfig the router to see if that clears up both problems?
3) Has anyone else seen performance issues after 16 to 20 hours of operation?

Yes you should do the reset to factory defaults and reconfigure with the latest firmware upgrade.
After you have done the reset see if you notice the issue I notified Linksys engineering about in my last post in the below thread:
http://community.linksys.com/t5/Linksys-Small-Business/LRT214-DNS-Proxy-stops-working/td-p/928464/pa...
If you do see that issue after about two week please add a post to that thread regarding it.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

I have no auto renewal button in my ipad

I have no auto renewal option in my ipad. I purchased babyTV app and am being charged every month.
I found the manage apps in the net but dont actually have the option to choose. So im puzzled on how to turn off my auto renewal function.
Thanks. Its says in the discussions board that if i dont have auto renewal button i wont be able to turn it off.
So in short im screwed. Ay way around it? Thanks

Read this
http://support.apple.com/kb/ht4098

Disable auto renewal

Hi, I would like to disable the auto renewal function on my account and cancel the purchase that Adobe is trying to do for me. I see this has been an ongoing issue for everyone.
It would be nice if there is some clarity to why there is an auto renewal added to all accounts. I believe, I have non opted in for one which under most EU regulations is required.
Best

You will be able to cancel your membership after payment for the 12th month has processed - see http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
If you have any issues with this, please let us know and I can always follow it up for you.
Refer to: Re: How auto-renewal works
Re: I do NOT want to auto-renew for another year!
Re: How auto-renewal works
Kind regards
Rajshree

ADOBE CC Marketing Subscription Trap: Offer USD 29.99 (Renew Subscription), Invoice USD 49.99

I had a few days ago a interesting marketing action with adobe. After a year of using Adobe CC I thought to cancel the my subscription, because normaly I dont use it so often. Like most members I paid with my annual fee conditions USD 29.99 / per month last year.
So I stopped my subscription and blocked a automatic renew function. As I checked my status and of the subscription persion on 27 May 2013 I received a screen infomration the there is a option to renew my subscription as a exisiting Adobe CC User for a other year. And that just for USD 29.99. Same conditions like last year. So I thought, nice move Adobe, why not. So I entered my accout details on the screen and I received a screen information that I'm qualitifed for the discount. Great so I confirmed the nothing else to do. I automatic renew function did the rest.
Suprise, yesterday I received the invoice notification for USD 49.99. Standard price. I contacted the Adobe Support, they had now clue about the situation or a discount offer through Adobe.
It's not about the money. It's a about the marketing trap. Has anyone else made the same experience or has the same problem?

Hi Anreas,
I'm sorry to hear about your difficulties. I see what I can do to help you get things straightened out.
-Dave

How do I cancel subscription to icloud

When icloud was first released I eagerly bought an upgrade to extend the free storage limit, but now find I am never going to get anywhere near the free limit. Yes, I know I was stupid to pay for something I don't need. I also seem to remember that the paid storage auto renews each year. Does anyone know how to cancel that auto renew function?
Thanks in advance

For instructions on downgrading your storage please see this page:
http://support.apple.com/kb/TS4009
and scroll down to 'Troubleshooting Storage Downgrade Issues'.
To cancel your storage upgrade renewal please see
http://help.apple.com/icloud/#mmd602084a
and expand 'Downgrade your storage for the next plan year'.

HT3702 I need to get a refund on a app that I have deleted over a month ago that I was just charged for! I thought that by deleted the app and going to the app to unsubscribe that I would stop geting charged for it but I'm still being charged

I need someone to refund me my money

Hi Denise ...
iTunes Store: Purchasing and managing auto-renewing subscriptions
Just deleting an app from a computer or device doesn't unsubscribe the auto renew function. That is the buyers respsonsibility after purchasing the app.
And, Apple's policy states that, "all sales are final" > iTUNES STORE - TERMS AND CONDITIONS

HR Renewal: Client infotype with upload/download file functionality

Hi Gurus,
I am writing to you today cuz a client of mine asked me to adapt one of their client-specific infotype for HR Renewal. Now the old-legacy infotype was developed by someone else so I am just to adapt the functionality for decoupled infotype framework and front-end.
The infotype has no subtype and record from 01.01.1800 to 31.12.9999 with a table-control listing all the pdf (or other format) file for a particular employee (such has income tax statement; SEPA bank account sheet; ID card etc... any kind of personal document relevant to employees). (that data is listed from a client Z table when opening the infotype; e.g. there is not sub-strucutrue in the pnnnn to represent that information).
upload, download and open file functionality is done via the infotype old-framework screen 2000 by some custom code merely replicated what is available by cl_gui_services.
File are stored directly on the SAP system not using the GOS option;
back-end stuff is more or less done and working at least I can do pretty much what I want in puit_ui tcode; read;modify... off course no file upload there
front-end is another story; I have managed the FPM views for the infotype (dataset; biz card, etc) and also I have managed to list the existing file in the ATS list.
However What I need still to do is to be able to upload from NWBC files to the back end system; and also download or open them. this seems to be a little harder than expected.
I am now doubting if I should rather do a P&F FPM form based or if I can achieve what it is suppose to do? or maybe I should go back to the client and talk him through changing that infotype architecture? using subtype instead of a connection to a Z table and GOS services to store employee files seems way easier for me; but still I am facing the upload/download functional which I dont really no how to wrap around the FPM either it is ATS or GL2. I have checked indian-specific infotype 3743 has this uploading functionality (GOS) but no corresponding FPM I could inspire myself on!
Also, not sure if I am missing something but when I try to change the value of one the field on the infotype pnnnn structure (that infty actually has one checkbox field) and save I end up with a dump because to BOL model does not find my entity (lo_entity). it s not the first infotype I am enabling for HR Renewal and I never had this error before.. I wonder what I am missing....
Would you gurus oriente me a lil on how I should best proceed? should I rather use P&F? Your help and advise would greatly be appreciated!
Thanks.

Hello:
So after some thinking through:
- upload and download are handler by the FPM ATS feeder (client copy with enhanced options into to manage event method).
- lo_entity without pointer causing dump occurred because I had inconsistently used the set automatic tag option into the FPM configuration floorplan editor.
- PAOC_ASR_PERSONAL_FILE would be my recommendation but client want to follow on its own mini-dev for personal file hosting.
Thank you gurus!

Hi, I have on my credit card monthly payments of fertilizer, and when I want to reveal to LR I get a reading indicating I should renew the subscription in order to use this function, alguine can help me ?? thx

Hi, I have on my credit card monthly payments of fertilizer, and when I want to reveal to LR I get a reading indicating I should renew the subscription in order to use this function, alguine can help me ?? thx

Thanks John, but this way is you get to this forum marinate options were
not available
2015-01-12 22:21 GMT-03:00 John T Smith <[email protected]>:
Hi, I have on my credit card monthly payments of fertilizer, and when
I want to reveal to LR I get a reading indicating I should renew the
subscription in order to use this function, alguine can help me ?? thx
created by John T Smith <https://forums.adobe.com/people/JohnTSmith> in *Adobe
Creative Cloud* - View the full discussion
<https://forums.adobe.com/message/7089860#7089860>

The Same Excel Functions Not Giving the Same Result in Numbers

I'm been using Excel for years and now that I've made the switch to Mac, I thought I should probably utilise the iWork suite of software and get rid of Microsoft once and for all.
Whilst I love the user-friendliness, there are so many small things that Apple to appear to have overlooked which keeps me hanging on to Microsoft Office just a little, but I digress.
OK, So I have one sheet in Numbers with the following data.
I am trying I need to search Column A for the TLDs in Column C, if they exist output the correct renewal price from Column D in Column B
e.g. A2 contains .net so B2 should have 12.50 in it.
A
B
C
D
1
Domain Name
Renewal Price 1
TLDs
Renewal Price 2
2
test.net
.com
5.00
3
test.co.uk
.co.uk
10.00
4
test.com
.net
12.50
So... can someone please explain to me why the same functions which exist in Numbers and Excel (VLOOKUP / LOOKUP / SEARCH) do not work in Numbers as they do in Excel? If there is a valid reason, fine, I'll accept that, but how do I acheive the above?
The formula which WORKS in B2 in Excel but NOT in Numbers is:
=VLOOKUP(LOOKUP(32768,SEARCH(C$2:C$4,A2),C$2:C$4),$C$2:$E$4,2,FALSE)
Thanks in advance.

So... can someone please explain to me why the same functions which exist in Numbers and Excel (VLOOKUP / LOOKUP / SEARCH) do not work in Numbers as they do in Excel? If there is a valid reason, fine, I'll accept that, but how do I acheive the above?
That's a form of "array function" (searching a "table array"). Numbers can't do array functions the way Excel can.
Here's one way to achieve the same goal in Numbers:
The formula in B2, copied down:
=VLOOKUP(RIGHT(A2,LEN(A2)−SEARCH(".",A2)+1),Prices::$A:$B,2,FALSE)
SG

Randomly weak/barely functional wifi on Early 2011 Macbook Pro running Lion 10.7.2, out of ideas. Help?

Hey there, boys and girls!
As of August 2011, I am the proud owner of a brand new 13 inch Macbook Pro! Being a tech geek, I have always wanted the opportunity to play with OS X, and I was pretty thrilled by my purchase. However, mere weeks after getting my shiny new computer, the wifi issues started. For no reason at all, it would seem as if my connection was dropped entirely, but checking activity monitor showed that the signal had simply capped off at about 6 kb/s. This issue has continued to randomly strike when I am trying to do something online, and almost always when it is something important. These issues have continued throughout the Fall of this year, and school has kept me too busy to actually get hardcore on this problem. The time has come.
I have read **** near every stinking article on the internet about this problem, and tried every solution that I have seen.
Here is the info I have:
*When the problem occurs, opening activity monitor and choosing "Network" shows a graph that maxes out at 6kb/s, sometimes less. There are characteristic spikes of activity, which are usually between 0 and 2 kb/s. It happens COMPLETELY at random, and for utterly variant spans of time. Sometimes it happens 8 times a day, for hours each time; other times, I get it once a day for about 15 minutes. There is no rhyme or reason to it.
*It happens most frequently on my home network. I am using a Netgear Wireless N router (a new one, at that) which I have configured to serve as wireless router and DHCP server for my Verizon router (on which I have disabled wireless and left essentially as a modem). However, the problem has also occurred outside of my home network.
*It's just my Mac. Every other device connected to the network continues to function normally when the cap occurs.
*Whatever data IS moving when the cap occurs is not user data; in other words, I cannot discern the source of the weak trickle of data that continues when the problem happens. During the problem, I cannot ping in terminal, or use any Internet-connected applications or browsers.
Here are some solutions I have tried which did absolutely NOTHING to resolve the problem:
*Rebooting (duh). Problem remains directly following reboot if it was happening right before reboot.
*Turning wifi off and on again (duh some more)
*Using other browsers/networked applications (also duh)
*Erasing all setting connection files so that they are forced to rebuild (4 plist files in library/preferences/systemconfiguartion)
*Erasing and re-adding networks from the remembered networks list
*Repair disk permissions and disk volume from recovery.
*Reset PRAM
*Keep a terminal window running that just pings a remote server endlessly. This basically cuts off as well when the problem shows up.
No combination of the following worked (and I tried each separately and in tandem, when applicable):
*Change the network location to a custom one
*Set a static IP
*Renew DHCP lease after location reset
I'm basically at my wit's end here. I am technically savvy enough to try basically any solution, but I seem to have run out of options. Does anyone have any solutions I haven't tried? The only other potentially relevant thing I can think of is that I did clone my original 320GB HDD over to a 500GB HDD near the start, but that shouldn't have anything to do with this... right?
I remember being eager to get this machine, but this network plague has me missing my broken-down heap of an old PC. For all it's various shortcomings, was at least able to connect to the **** internet consistently. I thought 10.7.2 would fix the problem... but nope. No help from Apple either. I'm pretty sick of this issue already.

Hey there, boys and girls!
As of August 2011, I am the proud owner of a brand new 13 inch Macbook Pro! Being a tech geek, I have always wanted the opportunity to play with OS X, and I was pretty thrilled by my purchase. However, mere weeks after getting my shiny new computer, the wifi issues started. For no reason at all, it would seem as if my connection was dropped entirely, but checking activity monitor showed that the signal had simply capped off at about 6 kb/s. This issue has continued to randomly strike when I am trying to do something online, and almost always when it is something important. These issues have continued throughout the Fall of this year, and school has kept me too busy to actually get hardcore on this problem. The time has come.
I have read **** near every stinking article on the internet about this problem, and tried every solution that I have seen.
Here is the info I have:
*When the problem occurs, opening activity monitor and choosing "Network" shows a graph that maxes out at 6kb/s, sometimes less. There are characteristic spikes of activity, which are usually between 0 and 2 kb/s. It happens COMPLETELY at random, and for utterly variant spans of time. Sometimes it happens 8 times a day, for hours each time; other times, I get it once a day for about 15 minutes. There is no rhyme or reason to it.
*It happens most frequently on my home network. I am using a Netgear Wireless N router (a new one, at that) which I have configured to serve as wireless router and DHCP server for my Verizon router (on which I have disabled wireless and left essentially as a modem). However, the problem has also occurred outside of my home network.
*It's just my Mac. Every other device connected to the network continues to function normally when the cap occurs.
*Whatever data IS moving when the cap occurs is not user data; in other words, I cannot discern the source of the weak trickle of data that continues when the problem happens. During the problem, I cannot ping in terminal, or use any Internet-connected applications or browsers.
Here are some solutions I have tried which did absolutely NOTHING to resolve the problem:
*Rebooting (duh). Problem remains directly following reboot if it was happening right before reboot.
*Turning wifi off and on again (duh some more)
*Using other browsers/networked applications (also duh)
*Erasing all setting connection files so that they are forced to rebuild (4 plist files in library/preferences/systemconfiguartion)
*Erasing and re-adding networks from the remembered networks list
*Repair disk permissions and disk volume from recovery.
*Reset PRAM
*Keep a terminal window running that just pings a remote server endlessly. This basically cuts off as well when the problem shows up.
No combination of the following worked (and I tried each separately and in tandem, when applicable):
*Change the network location to a custom one
*Set a static IP
*Renew DHCP lease after location reset
I'm basically at my wit's end here. I am technically savvy enough to try basically any solution, but I seem to have run out of options. Does anyone have any solutions I haven't tried? The only other potentially relevant thing I can think of is that I did clone my original 320GB HDD over to a 500GB HDD near the start, but that shouldn't have anything to do with this... right?
I remember being eager to get this machine, but this network plague has me missing my broken-down heap of an old PC. For all it's various shortcomings, was at least able to connect to the **** internet consistently. I thought 10.7.2 would fix the problem... but nope. No help from Apple either. I'm pretty sick of this issue already.

Continued wrong charges and unwanted renewed contr...

I am very unhappy with the way the problems I have had with my account have been dealt with. I have had continuous promises of my account being credited for the mistakes that bt have made for charges. The mistakes have been continuous from my first bill and taking service from BT which was over 4 years ago. Recently i have been accidentally, again, cut off for my broadband and charged 2 x £50 charges for Bt to have the pleasure of doing this. I have had incorrect customer service advice which has resulted in extra charges being made on my account for late payments and cut off fees, I have continuously complained about these and they have not been addressed. I have had no call backs and my account has been left without amendments when ever I speak to customer services they say that has been done now and will show on your next bill, or pay the extra £40 or so error and it will be credited on your next bill, I am on benefits and a single disabled mother to three children, one of whom is disabled and retarded. I have struggled to meet your demands but I have finally had enough and wish to take this complaint of my account to a higher level. I hope someone will contact me about this matter and a solution and also compensation for my time and stress which has affected my familys safety at times being without service. i demand there be someone look into the horrendous service I have recieved and also my contract to be looked at so that I may leave BT without any charges made for release from wrongly applied contracts for my BT broadband and BT phoneline and call packages which i have been chained to without asking for them to be renewed. I look forward to hearing from you asap
emma kerr
account owner

Hi EmmababyB,
Thanks for the post and welcome to the forum. I am so sorry to hear of all the problems that you have faced with BT.
The forum is a place whereby BT customers can help other customers with issues with BT's products and services. It is not a direct contact channel for making complaints.
Reading through your post it is clear that you have had a really bad experience and seems to be specific to your account so I don't feel you will get an answer on the forum for this. However in saying that I am happy to pick this up for you and help resolve this once and for all.
Please drop me an email to the email address in my profile. (click on my name and you will find the address under the "about me" section). Include your BT account details and the link to this thread.
I will take a look at your account to see what is going on. I am sure I will be able to help.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Certificate issues Active Directory Certificate Services could not process request 3699 due to an error: The revocation function was unable to check revocation because the revocation server was offline. 0x80092013

Hi,
We have some problems with our Root CA. I can se a lot of failed requests. with the event id 22: in the logs. The description is: Active Directory Certificate Services could not process request 3686 due to an error: The revocation function was unable to
check revocation because the revocation server was offline. 0x80092013 (-2146885613). The request was for CN=xxxxx.ourdomain.com. Additional information: Error Verifying Request Signature or Signing Certificate
A couple of months ago we decomissioned one of our old 2003 DCs and it looks like this server might have had something to do with the CA structure but I am not sure whether this was in use or not since I could find the role but I wasn't able to see any existing
configuration.
Let's say that this server was previously responsible for the certificates and was the server that should have revoked the old certs, what can I do know to try and correct the problem?
Thank you for your help
//Cris

hello,
let me recap first:
you see these errors on a ROOT CA. so it seems like the ROOT CA is also operating as an ISSUING CA. Some clients try to issue a new certificate from the ROOT CA and this fails with your error mentioned.
do you say that you had a PREVIOUS CA which you decomissioned, and you now have a brand NEW CA, that was built as a clean install? When you decommissioned the PREVIOUS CA, that was your design decision to don't bother with the current certificates that it
issued and which are still valid, right?
The error says, that the REQUEST signature cannot be validated. REQUESTs are signed either by itself (self-signed) or if they are renewal requests, they would be signed with the previous certificate which the client tries to renew. The self-signed REQUESTs
do not contain CRL paths at all.
So this implies to me as these requests that are failing are renewal requests. Renewal requests would contain CRL paths of the previous certificates that are nearing their expiration.
As there are many such REQUEST and failures, it probably means that the clients use AUTOENROLLMENT, which tries to renew their current, but shortly expiring, certificates during (by default) their last 6 weeks of lifetime.
As you decommissioned your PREVIOUS CA, it does not issue CRL anymore and the current certificates cannot be checked for validity.
Thus, if the renewal tries to renew them by using the NEW CA, your NEW CA cannot validate CRL of the PREVIOUS CA and will not issue new certificates.
But it would not issue new certificates anyway even if it was able to verify the PREVIOUS CA's CRL, as it seems your NEW CA is completely brand new, without being restored from the PREVIOUS CA's database. Right?
So simply don't bother :-) As long as it was your design to decommission the PREVIOUS CA without bothering with its already issued certificates.
The current certificates which autoenrollment tries to renew cannot be checked for validity. They will also slowly expire over the next 6 weeks or so. After that, autoenrollment will ask your NEW CA to issue a brand new certificate without trying to renew.
Just a clean self-signed REQUEST.
That will succeed.
You can also verify this by trying to issue a certificate on an affected machine manually from Certificates MMC.
ondrej.

ISE 1.2.1 - CLient certificate renewal and expiration

Hi all,
Anyone had any luck setting up and getting this functionality working? I have set up the correct authentication and authorisation flows and all works well. My major issue is that it would appear as though apple iOS devices do not allow you to update the profiles - meaning you have to delete the iOS profile which in essence means the entire renewal process is pointless.

Deleting the profile will just make the device appear as a brand new BYOD device which needs BYOD on-boarding. The process/experience should not be any different than when the device was first on-boarded. Thus, the user can delete the profile at anytime. Obviously there will be no access until the re-on-boarding happens but again that is not any different than when the device was setup originally. To answer your last question: It really depends on how you setup your policies but just because the device is registered it does not mean that it won't go through the on-boarding process. In addition, if your rules are setup in such way that the device must NOT be registered for on-boarding to succeed then the BYOD user(s) can use the My Devices portal to manually delete the iOS device from ISE without the need of admin intervention.

Time out functionality in Portal

Hi All,
If my portal is inactive for some fixed time, the user should be logged off automatically and an information message should be displayed on the login page.
How to achieve this ?
Regards,
Nikhil

I think there is no such timeout functionality...for portal..
Portal sessions are cookie based. On successful logon to the portal, the Portal issues a SAP logon ticket, with a default validity of 8 hours. That is a users session can atmost be of length 8 hours. Timout of the user's session is not possible.
Also if you reduce the default length of session, you will have to adjust the expiration time of the SAPlogon ticket by setting the "Lifetime of SAP Logon Ticket" in "Security settings" at "System Administration" --> "System Configuration" --> "UM Configuration".
However, please note that the cookie will eventually expire after this time setting, whether or not the user is idle. He has to renew the ticket after expiration.
Edited by: Anagha Jawalekar on Mar 20, 2009 3:15 PM

HR Renewal Functionality

Similar Messages

Maybe you are looking for