HRMD_A IDoc in error not raising an event

I have workflows enabled for IDocs in error.
If an inbound order IDoc (ORDERS) arrives in status 51, it triggers a workflow.
If an HR master data IDoc (message type HRMD_A) arrives in status 51, no workflow is triggered.
Here is what I have checked:
Partner profile has me as responsible agent in both cases.
Both type linkages are active for IDOCHRMD and IDOCORDERS event InputErrorOccurred.
Both IDocs types are posted in with the test tool and end up in status 51.
When I investigate the event trace, I can see that an event is raised for the ORDERS IDoc but not for the HRMD_A IDoc.
There are no errors in the type linkage status column.
So why would it be that the event is not being raised for the HRMD_A IDoc?
How can I find out what should be raising the event? I guess that there is a function module call to SWE_EVENT_CREATE or SAP_WAPI_CREATE_EVENT.
Kind Regards,
Tony.

Hi Tony,
I am a complete novice to workflow but I have a requirement liek yours to trigger workflow for idocs in error, so I was hoping you could point me in the direction of some documentation/steps on how to do this?

Similar Messages

  • HRMD_A IDocs in Error Status 02

    Dear SAP Peeps,
    Upon generation of outbound HRMD_A idocs, an error occurs. Error status is "02 - Could not find code page for receiving system".
    Can you guys assist me here? What does code page mean? How the error will be solve? The error occurs in every two weeks upon sending the idocs. Sending system is a unicode system while the receiving system is a non-unicode system.
    Thanks!

    i Think u have run some personnel acitons
    than u need to check the table T529A and check have u assigned the feature which standrad in sap for certain acions
    for Ex MSN20   MSN10  check these thr PE03
    in IMg
    check SEt up personnel Acitons

  • RBDMANI2 for IDOCs in error not working in Background..

    Dear All,
        We have an ALE-IDOC scenario in which our IDOC gets posted in the destination system with status 51 as per business reqt. We schedule a job in the background using program RBDMANI2 which is used to manually reprocess IDOCS in error.
        This background job was working fine in the 4,7 R/3 Server, but we have upgarded the receiving system to ECC 6.0. Now the problem is dat when we try to reprocess the IDOC using this job, the IDOC are not processing further.. It ideally is supposed to do further processing as per the code writen.
      We tried debugging the code(RBDMANI2) in background. But, its not helping.
    Kindly advise.
    Regards,
    Santosh Reddy.

    On primary research I found that there is a call to this FM 'SAPGUI_PROGRESS_INDICATOR' .
    In that FM see line 12.
    IF SY-BATCH <> SPACE.
              EXIT.    "do nothing in batch
           ENDIF.
    May be this is the cause of your error.
    Rhea.

  • Error while raising business event

    Hi all,
    While trying to raise my business event throw "Raise in JAVA" button i get the following error.*Exception occured in Java Raise - Exception when Invoking Web Service -> oracle.apps.fnd.wf.bes.InvokerException: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Message send failed: For input string: ""*
    What could be the reason for this error?
    Thanks and regards,
    Pradeep

    Hi,
    Please see
    Unable To Call Web Service From A Deployed OA Framework Page [ID 848795.1]     
    javax.xml.soap.SOAPException Error While Invoking SOA Webservice From R12 Server [ID 1467361.1]     
    Thanks

  • File to idoc scenario error - not working yet :(

    Hello! I'm trying to make changes in business partner record in CRM using idoc CRMXIF_PARTNER_SAVE_M01
    I have an error 56 EDI: Partner profile not available.
    In Control record in we02 transaction, I have right Partner number for Recipient information - logical system name like CRM has in SLD.  But there is no Port.
    In Sender information I have right Partner number, like my filesystem business system has in SLD and have a port SAPP1D - but  I have nowhere entered it!
    And one more little question. In we20 transaction am entering inbound parameters for partner:
    CRMXIF_PARTNER_SAVE
    CRMXIF_PARTNER_SAVE_M
    1) Is this right inbound parameters for my idoc?
    2) What Process code should I use ?

    Hi,
    in XI in IDX1 transaction, maintain a port for CRM system specifying the CRM port and the client and the RFC destination from XI to CRM system.......moreover if you are using apply control record values from payload option in reciver IDOC comm channel, then in the IDOC control record in msg mapping map the sender port to CRM port, partner number as logical system of CRM ie C2DCLNT100 and partner type as LS..........then when you will re-run your scenario, your IDOC will have CRM port also in the control record..........
    in CRM system your WE20 for LS for XI should have as an inbound parameter your IDOC - which i think you have already done.........
    One more thing - put everything in uppercase letters everywhere in msg mapping in control record data, in we20 setting etc.
    Regards,
    Rajeev Gupta

  • BPM Transformation Error not Raising Exceptions

    Hi,
    I've got a BPM receives a message, then call a transformation step and then send the message.  I've created exception branches for the transformation and send steps.  If the message mapping called in the transformation step works, the message is send, no problems.  If a message mapping exception occurs, for example a string index out of bounds, the exception branch is not executed.  Instead the BPM continues to the send step and an error occur because of the empty container element.(the container is empty because the mapping fails).  SAP Help states that an exception is "Thrown when a permanent system error occurs" in the Transformation step.  My question is what exactly is a permanent system error if normal message mapping exceptions is not a permanent system error?  And also, how do I generate a permanent system error when a message mapping exception is thrown in order for the exception branch in my BPM to execute?
    Any suggestions will be appreciated.

    I dont think there is a direct way to raise such error in mapping
    What is the sxi_cache status for ur integration process?
    Here r the steps for which permanent error is thrown
    http://help.sap.com/saphelp_nw04s/helpdata/en/33/4a773f12f14a18e10000000a114084/frameset.htm
    Regards,
    Prateek

  • Error in raising an event

    Hello friends
                    I have 2 iViews in a Page. The first iView consists of a variable for a query and the second iView is nested in a tabstrip. The second iView consists of 2 tabs with each consisting of a BW query. Both the queries share the same variable. So what I am doing here is passing the variable from the first iView  to the second iView using a Signal. The variable in the first iView is connected to a Signal-out using an standard event EVT 1 and the second iView is connected to a Signal -in with both the Signals having the same name. Now, when I am trying to deploy the model, I am getting the error "EVT 1 is declared but cannot be raised".
    Please help me with this.
    Also, if I am having two iViews within a page then is it possible to view them on a same webpage after deploying
    Thanks

    Hi Rishi,
    This is about your 1st question.
    1) Create one more form with pushbutton on 1st iView.
    2) Then assign "evt1" event to the same pushbutton as a custom action.
    About 2nd question, after completion of the above steps it will work.
    Regards
    Pramod

  • Numeric Error Not raise in case of editor field

    I have a strange problem. I have two fields, first one is Numeric field, and second one text editor. If i enter character in numeric field and press tab or enter curssor automaticaly go to text editor field, whitout raising any error, Even i used numeric validation. Please tell me if there is any solution for blocking it.

    This is totally GUI-dependent. Are you using Forms?
    Tom Best

  • ADF FACES  showOneTab does not raise valueChange events

    Hello all,
    the next problem with showOneTab tag:
    when changing to another tab, the input components like inputText or selectOneChoice do not get notifications about value changes, so the changes get lost.
    Is it a bug, intention or one can do something against it?
    Regards,
    OR

    Set "immediate" to false on all of the showDetailItems inside the showOneTab. It currently defaults to true (unlike all other uses of "immediate"); we may revisit that decision shortly.

  • Raise an event when an idoc invoice (INVOIC02) gets created in error

    Hi All,
    I’m trying to generate an email message from an output invoice when processed incorrectly.
    I created a subtype of IDOCINVOIC, updated the linkage table using swe2  but the events are not raised when I go to re-issue my invoice output.
    I know it’s possible to raise these events in idoc invoice exit ZXEDFU02 but  the status is not created at this stage.
    Is it possible to raise an event when an idoc invoice gets created in error?
    King Regards
    Ann

    @CoolDadTX -That's because I've written com servers in the past using VB.net, however they were not registered with the Running object table.
     What I'm trying to do in this case is have an application that will be started by the user, and then they will start another application written in .Net to connect to that first application.  The reason for this is that we have an application
    written in an old version of smalltalk that doesn't seem to support getObject but can create an IUknown, and we already have base classes to attach to COM objects written in .Net.  As this new application needs to be started first it can't be tightly
    coupled to the legacy application, so we are trying to register the new application and then connect a Dotnet Client that is being started through a  COM Interface from the legacy application.  I know it's convoluted but we need to keep the legacy
    application alive for a bit longer while we rewrite it as an add-in for the new application.
    The article that you linked to has been very helpful on the server side, but do you have any ideas as to how I can connect the sink on the client side in C#?

  • The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0 from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the
    installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException: Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    Thanks
    Suresh
    Suresh

    Hi,
    Can any one help me on the below issue ?
    while executing automated test case in test center it is showing as test case is in progress, then i navigated to virtual machine (where the test agent is online), there Internet
    explore has opened automatically and my test case execution started, but with in a seconds IE has closed . However, in test center, test case status is showing as in
    progress, after  2 or 3 min  some of  test cases getting passed and some are failed.
    Here my question is in lab center-->virtual machine, IE has opened automatically and navigated the 2 or 3  links and with in seconds IE has getting closed. Why IE is getting closed without completing execution?
    Error Message :
    The description for Event ID 0
    from source VSTTExecution cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event: 
    (mtm.exe, PID 5240, Thread 4) FileAggregatorSessionInfo: Error occurred while deleting temporary directoryException: System.IO.DirectoryNotFoundException:
    Could not find a part of the path 
       at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
       at System.IO.Directory.Delete(String fullPath, String userPath, Boolean recursive, Boolean checkHost)
       at Microsoft.VisualStudio.TestTools.Execution.Aggregation.FileAggregator.FileAggregatorSessionInfo.DeleteTemporaryDirectory(String
    temporaryDirectory)
    the message resource is present but the message is not found in the string/message table
    We are using VS 2013 (premium) and IE 10.0,  scripts have been created on the same versions. It is working fine  on
    developers command prompt but the same tests are getting failed in lab center test agent machine
    test agent log:
    QTAgentService.exe, AgentService: calling AgentObject.RunEndFileCopyComplete
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: waiting for agents to start.
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Successfully called 'Cleanup' on the test agent
    QTAgentService.exe, AgentProcessManager.PerformActionIgnoringExceptions: Calling 'StopDataCollection(int)' on the data collection agent
    QTAgentService.exe, AgentProcessManager.IsDataCollectionAgentNeeded: IsExecutedOutOfProc? True
    QTAgentService.exe, AgentPro
    QTAgentService.exe, AgentProcessManager.WaitForDataCollectionAgentProcessToStart: Agents started.
    QTAgentService.exe, AgentService: Connection to controller is up.
    Thanks
    Suresh

  • Object does not match target type when raising an event from c# to VB6

    I have a c# .net DLL that I use from a VB6 app. It exposes an event,
    and the VB6 app is sinking it.
    The VB6 app is receiving the event, as long as it is raised from the
    main thread of the .net DLL.
    I have an aync task being handled inside the DLL (delegate BeginInvoke). Any
    attempt to raise the event from within that thread casuses the reported
    error, even from within the AsyncCallback function, when the thread is ending.
    I noticed that the delegate for the event is not declared inside the
    interface. It's in that module, but above the interface definition:
        [ComVisible(false)]
        public delegate void LoggingEventHandler( string logData );
    The event is declared in the class itself as:
        public class Processor : _Processor
            public event LoggingEventHandler        LogNotification;
    Finally, to raise the event:
    if ( this.Completed != null )
        this.Completed( true );
    If I open the tlb with OLEVIEW, I can see the public event just fine. Of course, I expected to, as it's working up until the helper thread kicks in.
    Now for the REAL WIERD PART! This DOES work on several servers that have
    been in production for months. It's just this one server that it won't work
    on. Same code. Resinstalled/registered it 1,000 times. It took me a while to
    find that an error was even occuring, since it was being raised in the
    seperate thread. In other words, I'm receiving the event just fine on a series of servers. This is a new machine we're trying to bring online. I suspect it's environmental, but I can't figure it out.
    I don't understand why the publisher would be expecting a certain type of
    subscriber in the first place... unless the error is really triggered by the client when the event reaches it. I've put logging into the client, though, and the first line of code inside the event is not being executed.
    For the VB6 app, I reference the tlb file that is automatically created when
    I compile (Interop is checked). I unregistered and re-registered the tlb on
    the server. I regasm'd the dll itself. All dlls are in the same folder - not
    in the GAC.
    The stack trace is as follows:
       at System.RuntimeType.InvokeDispMethod(String name, BindingFlags
    invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32
    culture, String[] namedParameters)
       at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr,
    Binder binder, Object target, Object[] args, ParameterModifier[] modifiers,
    CultureInfo culture, String[] namedParameters)
       at System.RuntimeType.ForwardCallToInvokeMember(String memberName,
    BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData&
    msgData)
       at HPFS.Queue.IProcessorEvents.LogNotification(String logData))

    This is driving me nuts!
    I sure would appreciate any suggestions.
    I got this working on one of the two machines. The other machine had some other issues, so I had it re-imaged. It's been so long since I fixed the first one, that I can't remember exactly how I did it. Plus, I did so many things to it over two weeks, that I never really felt confident, anyway. But ... I could *swear* that the last thing I did back then to get this event to flow was to re-register the DLL's TLB.
    So ... This is win 2k with FW 1.1 + SP1.
    Completed is the delagate I'm trying to invoke.
    this.Completed.Target.GetType().Name = "__comobject"
    I've tried everything. Unregistered the .tlb. Unregistered the .net DLL. Verified that the app completely failed while unregistered. Created the TLB using RegAsm /tlb syntax.
    I tried using CLR SPY. It registers nothing. It only lets me pick an EXE. This is a DLL tring to raise to an EXE.
    I've looked at the TLB in OLE VIEW and I just don't know what I'm looking at.
    Is there any other tool or technique I can use to audit/monitor/trap this? .net is giving me *** for details about what's failing. I wish I could somehow debug into exactly what it's trying to do and get more details on the failure.
    Here's the error I'm getting:
    (Code -1) Object does not match target type.<Source:mscorlib>(Stack:    at System.RuntimeType.InvokeDispMethod(String name, BindingFlags invokeAttr, Object target, Object[] args, Boolean[] byrefModifiers, Int32 culture, String[] namedParameters)
       at System.RuntimeType.InvokeMember(String name, BindingFlags invokeAttr, Binder binder, Object target, Object[] args, ParameterModifier[] modifiers, CultureInfo culture, String[] namedParameters)
       at System.RuntimeType.ForwardCallToInvokeMember(String memberName, BindingFlags flags, Object target, Int32[] aWrapperTypes, MessageData& msgData)
       at HPFS.Queue.IProcessorEvents.Completed(Boolean success)
       at HPFS.Queue.Processor.RequestDone())
    Processor = the DLL I'm trying to raise the event from.
    IProcessor = the event interface that's exposed through COM.

  • Eventlog Forwarding Issues - Either the component that raises this event is not installed on your local computer or the installation is corrupted.....

    Hello all,
    OK so I do have Event Forwarding working - but I've noticed that when it's first configured I get messages similar to:
    The description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on
    the local computer.
    If the event originated on another computer, the display information had to be saved with the event.
    The following information was included with the event:
    The locale specific resource for the desired message is not present
    If I alter the subscription (wecutil ss subname /cf:events) the forwarded events are rendered correctly.
    However a product we are evaluating (which depends on event forwarding to work) always ends up with a couple of mal-rendered lines - always look something like:
    Required Privs: %9
    I built a standalone AD domain and joined the same 'problem' clients to this domain and re-configured Event Forwarding - there was no need to change the subscription format type to "events" and the events were forwarded correctly and also
    the product we are looking at worked straight away.
    It seems that when event forwarding is configured in our live domain (or any of the test labs we have) I always get the attached errors....
    I've read a number of blogs that describe the issue and most recommend altering the subscription format - this however does not solve the issue entirely...
    Has anyone else seen this issue and maybe found out how to resolve?
    Thanks all
    Carl

    Yes,
    I have ACS forwarder and OPSmgr Agent on Event log collector computer.
    Event log collector computer shows some of the forwarded events incorrectly like "The
    description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"
    When I change regional settings on Collector computer, event log shows all events(also previous) correctly.
    Forwarded with ACS and Opsmgr Agent events 
    from collector computer were saved in DB correctly, even when event log show them incorrectly like "The
    description for Event ID 104 from source Microsoft-Windows-Eventlog cannot be found"

  • Monitoring and Alerting Infrastructure : Errors raised during Event Calculation

    Hello together,
    System: Solution Manager 7.1 Sp7
    since one day I get this alert every five minute: "Monitoring and Alerting Infrastructure : Errors raised during Event Calculation".
    Name....................Errors raised during Event Calculation
    Start Time..............20.03.2014 15:12:27 CET
    End Time................20.03.2014 15:12:27 CET
    Managed Object..........Monitoring and Alerting Infrastructure
    Managed Object Type.....Technical Component
    Rating..................Red
    Category................Exceptions
    Status..................Open
    Opening the alert shows this:
    E2E Alert Analysis Report:
    This metric outputs the der Event Calculation Engine (ECE) error messages. The ECE runs by default every minute, under the job name SAP_ALERT_CALCULATION_ENGINE, which then starts the report ACE_CALCULATION_CONTROLLER.
    Analyze the error messages in the Application Log, as follows:
    Start the transaction SLG1, and enter the object E2E_ALERTING and subobject ENGINE.
    When opening trx SLG1 I can see this error:
    Aggregate for managed object 00215ACCD6DE1EE2B8FEE39484598162, type
    80E0ED08ADA71DEEBFD84650DEF6421F not found.
    How can I fix this?
    Thank you very much.
    Regards,
    Ralph

    Hi Ralph,
    We are facing the same issue is our system. I have checked the specified note and observed that few of the systems had to be updated in Managed System Configuration. I have updated the systems. But, the alerts have not stopped.
    Can you please tell me the procedure to resolve this issue?
    Thanks.
    Regards,
    Deepika R

  • EDI Delivery - Not raising error for invalid ISO UOM

    Standard SAP FM IDOC_OUTPUT_DELVRY include LV56KF62 performs Unit_of_measure_sap_to_iso but does not analyze the return code and incorrectly generates an invalid IDoc. The function called, unit_of_measure_sap_to_iso raises an error internally when the iso-code is invalid but an error message is not raised.
    Is there a correction for this situation?
    Standard SAP code follows:
    ((LV56KF62)
    PERFORM UNIT_OF_MEASURE_SAP_TO_ISO USING    TAB_LIPS-VRKME
                                         CHANGING E1EDL24-VRKME.
    (UNIT_OF_MEASURE_SAP_TO_ISO)
    FORM UNIT_OF_MEASURE_SAP_TO_ISO USING VALUE(SAP_CODE) TYPE ANY
                                    CHANGING    ISO_CODE  TYPE ANY.
      DATA: H_ISO_CODE LIKE T006-ISOCODE.
      CALL FUNCTION 'UNIT_OF_MEASURE_SAP_TO_ISO'
           EXPORTING
                SAP_CODE    = SAP_CODE
           IMPORTING
                ISO_CODE    = H_ISO_CODE
           EXCEPTIONS
                NOT_FOUND   = 1
                NO_ISO_CODE = 2
                OTHERS      = 3.
      IF ( SY-SUBRC IS INITIAL ).
        ISO_CODE = H_ISO_CODE.
      ELSE.
        CLEAR ISO_CODE.
      ENDIF.
    ENDFORM.                               " UNIT_OF_MEASURE_SAP_TO_ISO
    FUNCTION UNIT_OF_MEASURE_SAP_TO_ISO.
    ""Lokale Schnittstelle:
    *"       IMPORTING
    *"              SAP_CODE LIKE  T006-MSEHI
    *"       EXPORTING
    *"              ISO_CODE LIKE  T006-ISOCODE
    *"       EXCEPTIONS
    *"              NOT_FOUND
    *"              NO_ISO_CODE
    Deklarieren
      data: code(3) type c.
    Maßeinheit bestimmen
      SELECT SINGLE * FROM T006
        WHERE MSEHI = SAP_CODE.
      IF   SY-SUBRC <> 0
        OR T006-ISOCODE IS INITIAL.
        move SAP_CODE to code.
        MESSAGE E035 WITH CODE                                  "B20K071649
          RAISING NOT_FOUND.
      ENDIF.
      ISO_CODE = T006-ISOCODE.
      IF ISO_CODE IS INITIAL.
        RAISE NO_ISO_CODE.
      ENDIF.
    ENDFUNCTION.

    I am afraid not, but eventually your IDoc should fail as it blanks out the unit if it cannot be converted to ISO code.

Maybe you are looking for