HRMD_A replicating Hr master data

Scenario - HR master data through idocs.
successfully sent from H system to XI
but idoc with error in SRM system(HR->XI->SRM)
idocs have error status - 51 ale : inbound processing for hr master data.
Some idocs have error message 'infotype 003 will be ignored'
as in SRM no PA infotypes are there.
I think this would be because Infotype 0003 data should have been filtered in XI.
But some other idocs also have error
Object id ****** S not created in SRM system.
Please help what can be the cause
Regards

Hi Boss,
Ask ur functional people to object ids in SRM system . In some cases because of data problem we will get the 51 status code
that means '' application document is not posted." so, consult your Fuctional people.
Best Regards,
N.Narasimha Rao.

Similar Messages

Modify vendor number when replicating vendor master data from ECC to SRM

Hi,
Is there a way to modify vendor number(manually input vendor number e.g. from a file) when replicating vendor master data from ECC to SRM using the vendor master data user exit (SAPMF02K)?
Does anyone have documentation on the user exit, how do I use it??
Thanks and Regards'
David

Hi David,
Please go through the link below:
[Enhancement SAPMF02K Vendor Master Data - question about LIFNR;
Regards
Anirban

Error while replicating customer master data from R/3 to CRM

Hi gurus,
I am working on replication of customer master data from R/3 to CRM. It was working fine till date. But Now I am not able to replicate because in Inbound queue (in CRM 5.0) I get the status SYSFAIL for queue name R3AI_DNL_CUST_ACGRPB. When I checked SYSFAIL it shows "Incorrect parameter with CALL FUNCTION"
Kindly help regarding it.
regards,
vimal

Hello Vimal,
Please refer 552435 and see if this helps.
Please reward points.
regards,
Muralidhar Prasad.c

Error while replicating vendor master data from R3 to SRM

Hi,
I am trying to replicate Vendor master data from the R3 system to SRM system(7.0) for the first time and am facing the following error :
Organizational unit 50000004 does not exist; check entries
Message no. BBP_BUPA034
I have gone through the other posts with similar issues but haven't been able to find a solution.
Any ideas?
Thank you.

hi sahlini
did you create a vendor organisation structure via PPOCV_BBP ? SINCE YOU REFER THIS NUMBER 50000004 WHAT IS THIS?
BR
\MUTHU

Issue while replicating the Master data from R/3 Backend to SRM

Hi experts,
I am supposed to do replication of master data from ECC 6.0 R/3 to SRM System.
I have issue at T- Code: R3AS.
For Initial Load of objets :
1) DNL_CUST_BASIS3
2) DNL_CUST_PROD0
3) DNL_CUST_PROD1
I am getting following error. :
 The following Errors/Warnings occured. Do you want to continue?
 DNL_CUST_BASIS3: No active entry in Table SMOFSUBTAB. Read OSS note 339787
 DNL_CUST_BASIS3: No active entry in Table SMOFSUBTAB. Read OSS note 339787
 DNL_CUST_BASIS3: Object will not be loaded
for all the objects we re geting the same error.
In OSS Note 339787 :
Reason and Prerequisites
You attempt to start the initial load of the R/3 adapter for an object for which no function module for processing data from the OLTP is entered in the SMOFSUBTAB table. This means that the data would be ignored if the initial load could be started.
Another cause for the output of this error message is the inconsistent maintenance of the OBJCLASS field in the SMOFOBJECT and SMOFSUBTAB tables.
Solution
Enter a processing module in the SMOFSUBTAB table or set the object to 'Inactive', so that no initial load is carried out for it. The change can occur using the maintenance Transactions R3AC5 or R3AC3.
If you want the object class to be communicated, change the OBJCLASS field in table SMOFOBJECT so that the contents correspond to the OBJCLASS field in the SMOFSUBTAB table for the object.
While checking the table entries, object
DNL_CUST_BASIS3, DNL_CUST_PROD0 and DNL_CUST_PROD1 are not there.
Table SMOFSUBTAB can not be maintained in SM30. how to maintain these entries in Table SMOFSUBTAB.
Can any one help me in this regards.
Points will be rewarded.
Thanks and regards.
Kalyan

Hi Dinesh,
i have done reqd entries in the table CRMSUBTAB in ECC?
also check other tables in ECC
CRMCONSUM
CRMRFCPAR
CRMPAROLTP in ECC
and
SMOFPARSFA in SRM
i want to know how to maintain the enteriers in Table L SMOFSUBTAB in SRM system.
regards
kalyan

Problem in replication of HR Master Data to CRM

Hi All,
I am working on ECC 6.0 and CRM 7.0 systems.
I have made all the configurations for replicating HR Master Data from HCM( or HR module in ECC) system to CRM as per the best practices. We have maintianed the Organisation Structure only in HR module and not in ECC and we are trying to replicate the same to CRM system. For the Organsiation structure we have maintained different number ranges for all Company Codes as per the requirement.
I need to know how the number ranges are to be maintained in CRM side in BUCF transaction in order to replicate the Org. Unit with the same number in CRM.
My problem is that for the first Company Code say 1200 we are getting the O S P replicated btu when I try the same for other company codes I am getting Success Idocs but BP is not getting created when synching HR data via report HRALXSYNC.
Also suggest whether we need to maintain the same structure as in ECC HR system in HR switches in SM30 (Table T77s0).
Regards
Kshitij

Hi ,
Have you made checks related to HRALX in t77s0 table as those are mandatory for integrating ECC and CRM integration.
checks like HRALX-OBPON, HRALX-PBPON etc.
Thanks
Sonia

How to insert e-mail into a customer master data

Hi all,
i need to insert e-mail into customer's master data, which bapi can i use? and, if that possible, how?
i explain the situation: we need to let some users change a customer data, what we want is create a transaction, let say ZXD02, that only let a user add or change emai for customer and update the Notes (see attachment). What user do, have to be replicated in Master Data in General Data-->Address-->E-Mail
Any suggestions?
Thnks a lot

Hi Cristina Martínez Eguiarte
We can implement field level authorization in SAP standard IMG settings. There is no need of any exit BAPI or screen/transaction variant for this. Please go through my doucument in which I have shared the process and settings. I did this for some other field and I hope you can do it for Email ID field as well.
Field level authorization for customer and vendor master in SAP.
Please test and update.
Thank$

Integrate HR OM master data to external system HRMD_A / HRMD_B / HRMD_ABA ?

Hi,
I would like to setup hr master data distribution using PI to external non SAP system. after i have searched from the document there are 3 idoc HRMD_A, HRMD_ABA and HRMD_B. Please advise which message type more suitable for my scenario ?
Thank you and Best regards
Fernand

Hi,
The difference is in the segments that each one includes, you can check it in transaction WE30 for example for
the IDOC Type HRMD_A07 (which is linked to HRMD_A)vs. the IDOC type HRMD_ABA05 (which is linked to HRMD_ABA)
The first one manages more record, therefore you can send more infotypes. This is because its manages all the standard OM information.
The HRMD_ABA is more used if your destinatio is a CRM or SRM system which requires less data.
Regards,

Customer master data not replicated to DSD Connector tables - BD12 - Idocs

Hi experts,
I have a customer existing in 2 different sales organizations. I need to replicate it to the DSD/ME_CUST_SA table in the DSD Connector.
The Idoc's segments generated while executing BD12 transaction, include only information for one sales org (VKORG) but I see no records or segments regarding the other Sales Org.
I think mapping rules are just fine (VKORG field is correctly mapped to DSD/ME_CUST_SA table)
What I need is to have both data replicated: that is, data from both sales orgs.
Any thoughts on this?
Thanks in advance
Edited by: Jose Barreto on Jun 4, 2008 11:13 PM

Hi Jose,
pl. go through note 1015076 and implement it if useful.
please email your personal ID at my id( given in my profile)
as I am also trying to implement DSD and need some help.
Note: reward Points if helpful
Thanks,
Akhil

Not able to see the records in master data

Hi friends
My requirement needs the data to be loaded from a RDM table.I created a data source in the R/3 and by using the extracto checker i am able to see the data.I created the info packages one for Attr and other Txt,replicated the datasource and loaded the data.I am able to see the data in the PSA and when i go into monitor in the infopackage it says the data has been loaded and it shows no errors.But I am not able to see this data in the master data info object.Can anyone please help me out???
Mouli

Hi
Check out your infopackage setting: if its upto PSA or to MD table also
Open Master data table in SE11 and check the OBJVERS field wether the MD is activated or not!
Regards
GSK

Master Data Text Used as Line Items in ODS

Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.Hi Experts! 
I would just like to know if I can use the text I loaded of master data Revenue Type from R/3 in BW? 
What I have done already is that I have created a customized extractor in R/3 under the CO-PA-IO node in RSA6 (since I think this is where this data is coming from/should belong under. A consultant of ours (before I got here) have already set up the other individual extractors for Sub Product A & B, Product Line, others in the FS10N transaction, document line item details.
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!
Once I have created it, I already replicated it in BW and have already setup the infosource. I created a InfoObject as Master Data with text and I loaded data from infosource. After loading, when I maintain Master Data for the characteristic I created in BW, I can see the pulled data that I have loaded from R/3. It is correct. 
Now this is where I am having a problem. I need to know how to be able to use this Master Data text when I load line items (0EC_PCA_3) to my PCA ODS. As it is right now, I have setup the EC_PCA datasource, replicated it and activated it as well, and I have already added a Revenue Type characteristic to this datasource already and have mapped it accordingly. However, I am unable to pull any data when i manage the contents of the ODS, but i can see the it in the maintain master data. 
How can i set it up such that I am also able to match my line items with their corresponding Rev Type Text in the ODS results? It is important to note that for Sub Product A, B, and Product Line fields, the previous setup is able to do so, and I am able to see results for these in the ODS line items results. These are also setup as master data text in BW by our previous consultant and I followed the same procedure and setup. 
I feel that I am just missing a step on how to tell BW that the master data text should also be matched to the Line Items in the ODS during loading.
Kindly seeking for your assistance and advance thanks!

Hi Simon, 
Thanks for the reply! 
First of all, yes, I think we are on the same page regarding what I want to do... I have created a master data infoObject in BW, created a customized extractor in R/3 under CO-PA-IO node, and mapped them to each other in BW such that when i execute a package in InfoSource in BW, i am able to load master data text in InfoObject Rev Type in BW. 
Kindly explain more on "you should have created the revenue type as a text datasource and loaded the data into the text and not the master data". Do you mean to say that I should have just created a regular datasource (i.e. Flexible Update in any Data Target InfoSource), rather than a direct update of Master Data datasource? 
However, if this is what you meant, please remember that for other characteristics such as Sub Product A, B, Product Lines, Sales Region, Business Center etc. (as seen in FS10N tcode per GL), are reflected in ODS per line item, and they are setup as master data. So I was thinking maybe i just missed a step in mapping. 
Is this what you meant? My main goal is to be able to have the line items i load in ODS be matched to the particular revenue type for that GL's profit center (seen in FS10N tcode in R/3)
Thanks again.

Master Data loading got failed: error "Update mode R is not supported by th

Hello Experts,
I use to load master data for 0Customer_Attr though daily process chain, it was running successfully.
For last 2 days master data loading for 0Customer_Attr got failed and it gives following error message:
"Update mode R is not supported by the extraction API"
Can anyone tell me what is that error for? how to resolve this issue?
Regards,
Nirav

Hi
Update mode R error will come in the below case
You are running a delta (for master data) which afils due to some error. to resolve that error, you make the load red and try to repeat the load.
This time the load will fail with update mode R.
As repeat delta is not supported.
So, now, the only thing you can do is to reinit the delta(as told in above posts) and then you can proceed. The earlier problem has nothing to do with update mode R.
example your fiorst delta failed with replication issue.
only replicating and repeaing will not solve the update mode R.
you will have to do both replication of the data source and re-int for the update mode R.
One more thing I would like to add is.
If the the delat which failed with error the first time(not update mode R), then
you have to do init with data transfer
if it failed without picking any records,
then do init without data transfer.
Hope this helps
Regards
Shilpa
Edited by: Shilpa Vinayak on Oct 14, 2008 12:48 PM

Replication of Customer master data from R/3 to CRM.

Dear Friends,
If i want to replicate customer from R/3 to CRM what are the prerequisites and how to execute a campaign for the replicated BP's(target groups).What is the load object that we use in R3AS.
REgards,
Prabhu.

CUSTOMER_MAIN is the object used to download customers from R/3 to CRM.
For CRM 5.0 you can use the link below:
http://help.sap.com/bp_crmv250/CRM_DE/BBLibrary/html/BBlibrary.htm
You then need to read the instructions for:
CRM Generation
CRM Connectivity
CRM Customizing Replication
CRM Organization Model
CRM Master and Transaction Data Replication
Those steps will provide on how to setup the middleware for customers.
You then will need the to read the following building blocks for marketing:
CRM Central Master Data
CRM Marketing Master Data
CRM Lean Campaign Management.
Good luck,
Stephen

How to use LSMW on CRM for bulk master data creation?

Hello Experts,
I need your help to able to use LSMW on CRM for bulk master data creation. Below is described my detailed requirement; -
We have CRM 2007 integrated with SAP ISU (ECC6.0). As per business process all Business Master Data (BP details, Business Agreement details etc) and Technical Master Data (Connection Object, PoD etc.) is created in CRM and then it is replicated in ISU. We are going to start Assembly Test soon. Now we need to have all master data in place. Tool we want to use is LSMW.
Now can you help me right from scratch on how to use LSMW for bulk master data creation in CRM?
Please give me documents / links etc that is relevant.
Regards,
Rohit

Hi,
I have looked into your query.
These are some information which might be useful to you.
What is LSMW?
Legacy System Migration Workbench or LSMW is SAP standard program that can be used to easily load / change master data or transactions in SAP without any programming at all. It can be used to upload data at cutover, such as: open orders, contracts, materials, vendors, stock on hand. It can also be used in a production system to make changes to existing data. Very limited authorization checks are available on the transaction, so the use of it must be very well controlled.
One input file can be used to create all the views of the material master. For all the material types. Even if different views and fields are used for the different materials.
Steps to take
1. Create text file with data to be loaded
2. Set up and run LSMW
The following link will provide good information on LSMW Idoc method:
[http://help.sap.com/saphelp_nw04/helpdata/en/ad/2d54a41d7011d2b42e006094b944c8/frameset.htm]
I hope this helps.
Regards,
Venkat

IC Web Client ,(CRM 7.0) creation of Tech Master Data for IS Utilities

Hi Experts,
We have created & assigne d (UTIL_IC_REG) Business Role in our project.
When I check the Technical Data option , it allows me to create ( Connection Object ,Premise & POD )
My question is how these objects are created.
Is these object first created in CRM & then replicated to ISU or it directly creates in ISU & then replicated to CRM.
Our requirement is to create Tech Master data in ISU & then replicate to CRM for Conn Object & POD.
Can anyone please guide me in this scenario

Hi Sagar,
Yes, ISU should be your system of reference. You replicate the objects to CRM.
Sincerely,
Glenn
Glenn Abel
Covington Creative
www.covingtoncreative.com

HRMD_A replicating Hr master data

Similar Messages

Maybe you are looking for