HSlider doesn't show initial decimal values

I have this HSlider:
<s:HSlider minimum="0" maximum="1" value=".7" stepSize=".1"/>
When my app starts, the Slider ball is at the very far right of the component. It's reporting the value (.7) properly to an item that's bound to it, it just doesn't display it visually. I can then drag the ball around and it will behave as you'd expect.
I'm running SDK 12891.

Hi,
This looks like a bug. A workaround is to set snapInterval=.1 as well as stepSize. Could you please log a bug on https://bugs.adobe.com/flex/?
Thanks,
-Kevin

Similar Messages

MB52 doesn't show return quantyties values

Dear experts
After sales return, the qty shows under 'Returns'. But in MB51, corrosponding values are not shown under any column. can anybody guide on this issue, where i can see the return qty values? or in sap, return values doesn;t show in MB51?
Thanks
Venugopal

Hi,
This looks like a bug. A workaround is to set snapInterval=.1 as well as stepSize. Could you please log a bug on https://bugs.adobe.com/flex/?
Thanks,
-Kevin

WebDynpro iView doesn't show initial screen

Hi,
I've a strange problem in calling an process from a Web Dynpro iView. Instead the expected 1st form in Action1 I only receive the text message: "Process has been initiated".
The strange thing is, testing the processes in "Initiate" tab in Design Time allways runs fine with the first screen.
This problem occurs with sap delivered example processes too. For example I tried the SAP delivered example "Time-off process".
My steps are:
1. check for related action-role is set to "Initiator".
2. Generation URL.
3. Initiating by "Initiate" tab from DesignTime.
4. Process opens with the first step form correctly.
5. copy the init string into WebDynpro iView.
6. starting Web Dynpro for Java iView
7. Instead the expected form, I only receive the text message"Process has been initiated"
I suppose something is wrong with my WebDynpro or role settings, but I don't have any idea anymore.
My settings in Web Dynpro for Java iView are:
Application: AInstantiation
process.template.id=7CE44B...&process.autostart=t
Namespace: sap.com/cafeugpuiinst
Authentication: default
In Portal I own J2EE_admin, GP Superadmin, GP Runtime WC and GP Business Expert roles.
Thanks.
Michael
Edited by: Michael R. Mueller on Apr 11, 2008 10:02 AM

Hi Sujana,
thanks for your message again. I checked my parameters again, but couldn't find any problems there.
Requestor ID
I have been inluded all of the generated parameters from Design Time into my Web Dynpro Proberties. The first action of the process is set to Initiator. I think in this case the user assignment should be manged by the system automatically.
Namespace:
Also the namespace sap.com/cafeugpuiinst is definitly working. When I changed this to an other value, I received an application-error after starting the iView.
Layout
I'm not sure about the required layout. Which are the requirements? Is there a special layout for my page, which is including the Web Dynpro iView, necessary?
..But my Callable Object only needs one iView I think.
How I call the process
My structure in calling this process is:
User chooses entry in User-Menu -> User assigned Role -> Page (standard layout) -> Web Dynpro iView -> GP Process initiate
I posted my configuration here, maybe you can take a look at this please?
My properties for my Web Dynpro are the following:
Application Name: AInstantiation
Application Parameters:
+process.template.id=7CE44BF090BF11D99817000D60B211F1
&EndDate=&AbsenceTypeText=&BeginDate=&process.autostart=t
&SimulationCode=&CompletionCode=&ShortTermCode=
&CompletionMessage=&Comments=&SimulationMessage=&PaidFlag=&LongTermCode=+
Namespace: sap.com/cafeugpuiinst
GP Design Time
And the parameters generated from URL generation in GP Design Time (starting with button "open instantiate application" is working) are:
+../../sap.com/cafeugpuiinst/AInstantiation?process.template.id=7CE44BF090BF11D99817000D60B211F1
&EndDate=&AbsenceTypeText=&BeginDate= &process.autostart=t
&SimulationCode=&CompletionCode=&ShortTermCode=
&CompletionMessage=&Comments=&SimulationMessage=&PaidFlag=&LongTermCode=+
I pasted the parameters of this string exactly into the application parameter field of my Web Dynpro.
Thanks again.
Regards,
Michael

SHOW DECIMAL VALUES IN QUERY

Hi,
I would like to show the decimal values of a calculated keyfigure when i execute the query.
Heres whats happening:
Base Price * Qty = XXXXX
11*2.6=28.6
bur when i execute the query it shows 29 as the answer, its rounding it off. How can i fix this?
Thanks

Use report SAP_RSADMIN_MAINTAIN and set object 'IGNORE_T006_ANDEC' to the value 'X'
Decimals will show up right away!
More details why this is happening in Note 866505
cheers,
Mantas
Edited by: Mantas Vaisvilas on Sep 2, 2008 12:24 PM

French characters in run time parameter values doesn't show up in emails

We have a custom workflow with configurations to send email when a request is assigned to a person and also to send email on request rejections.
We are encountering following issues with respect to French characters that are available in the message body and message subject.
Issue 1:Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. Since the message body contains French characters we have used ISO-8859-1 encodings to render the message properly to the user. The message body also has some run time content from the task payload.
For e.g. À titre de responsable fonctionnel, une demande d''approbation pour un accès informatique vous est assignée.
Accès informatique demandé : <%/task:task/task:payload/ns1:ObjectDetails/ns1:name%>
In this case all static text values are rendered properly to the end user in his email. However the French characters in run time parameter values doesn't show up properly and has some weird characters.
Issue 2: Unable to change the default subject shown in the approval task emails i.e. Notifications are configured in Human Task (ApprovalTask.task) when a task is assigned. By default it shows Action Required: Approval. How can this default value be changed?
Issue 3: We have an Email Activity in Bpel process that follows a task rejection. The emailpayload is ISO-8859-1 encoded and works for the message body. However the email subject shows up with ISO-8859-1 encodings itself and doesn't convert to proper string in the end user's email. Is there any specific setting required for french characters in subject?

Hi Kulwinder,
Thanks for your reply.
In fact I do, I've follewed the "Using SAP HANA Variables with SAP BusinessObjects BI4.0" guide.
Please note, when I use a fix value to parameter is working fine, for example:
SELECT *
FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$','20130530'))
But when I set prompt of the DataFoundation parameter I get and error, this is my sentence:
SELECT *
FROM "_SYS_BIC"."prueba-concepto/CV_TEST_VAR_II" ('PLACEHOLDER' = ('$$FECHA$$',@Prompt(FECHA)))
To me is very curious that I can't enter a value in the DataPreview in Hana Studio, because is not requested, even when the input parameter have been set as mandatory
Have you idea of what could be happening?

Value doesn't show up after selection in matchcode

I made a few screenshots and put them in links to explain my problem. Thx!
I'm in MR22, the matchcode is not a standard one.
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen1.jpg]
I click on F4 for the material
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen2.jpg]
I Click on OK
Link: [http://i698.photobucket.com/albums/vv348/su_blimo/screen3.jpg]
I get a list of materials and doubleclick on one
Link:[http://i698.photobucket.com/albums/vv348/su_blimo/screen4.jpg]
The material doesn't show up??!!

Hi,
Make sure that the Export flag against the Material field is selected in the custom search help that you are referring to.
Values can be returned from the hit list to the input template (screen) with an export parameter.
Hope this is helpful.
Regards,
Hemanth

Decimal values not showing in PO output

In PO qty is created with decimal values ( 30.500 M)
when print the output it is coming as 31 m ( values is getting rounded off)
PO is created with ref to sales order , where as qty is EA
in SO . ( Qty EA is not affecting PO / PR)
Please advise on the PO configuration part to get the PO output with decimal values.
Thanks & regards
Ray

if PO has the correct quantity with decimal places, then check the sapscript form.
Muralidhar

Public int indexOf(int ch, int fromIdx) doesn't work for some decimal value

I have tested two strings below. These two string are identical, except the first string has a char ', which has a decimal value of 131. And the second string has a char 'À', which has a decimal value of 192. I am expecting the same output, which is 11, but I got -1 for the test I did using the first string. In the API for public int indexOf(int ch, int fromIndex), values of ch is in the range from 0 to 0xFFFF (inclusive). It is highly appreciated if anyone could provide any insights on why -1 returned when the first string is tested. Thank you in advance.
String strHasDecimal131 = "Test value , it has a decimal value of 131";
String strHasDecimal192 = "Test value À, it has a decimal value of 192";
int badDecimal = 131;
int idxBadDecimal = strHasDecimal131.indexOf( badDecimal, 0);
System.out.println( "index of Bad Decimal: " + idxBadDecimal );
The output is: index of Bad Decimal -1
int badDecimal = 192;
int idxBadDecimal = strHasDecimal192.indexOf( badDecimal, 0);
System.out.println( "index of Bad Decimal: " + idxBadDecimal );
The output is: index of Bad Decimal: 11

Thank you everyone for your inputs. Following are the print statements and the output: for character '' and ' À':
System.out.println((int)'\u0083' + ", " + (int)'\u00C0' + " print decimal value" );
Output: 131, 192 print decimal value
System.out.println((char)'\u0083' + ", " + (char)'\u00C0' + " print character value" );
Output: ?, À print character value
According to Latin-1 Supplement table, the first char in the output would have the appearance of , instead it has the appearance of ?
System.out.println( (int)'' + ", "+ (int)'À' + " print integer value");
Output: 402, 192 print integer value
I also have tried to print out the decimal value of following char: � , according to Latin-1 Supplement table, these char has decimal value of 128 through 135 and hex value 0x0080 through 0x0087. And the output from java println is: 8364 65533 8218 8222 8230 402 8224 8225.
System.out.println((int)'' + " " + (int)'�' + " " + (int)'' + " " +(int)'' + " " + (int)'' + " " +(int)'' + " " + (int)'' + " " + (int)'' );
As I did before, I print out character of decimal value of 128 through 135
System.out.println((char)128 + " " + (char)129 + " " + (char)130 + " " +(char)131 + " " + (char)132 + " " +(char)133 + " " + (char)134 + " " + (char)135 );
Output: ? ? ? ? ? ? ? ?
Not sure why java prints character for decimal value of 128 through 159 differently from what appears in the Latin-1 Supplement table. Any of your inputs are appreciately.

The document Address doesn't show the block when country isn't USA

hello
i have a little problem, when I create a new document for a customer which ship to address's country is different from USA, the document Address doesn't show the block. i checked the bp address in the bp master data and the block is written, also when i click on the ... button near the ship or bill to address the block has a value !! but when i go back to the document, there is an empty space where the block has to be in the document address.
is there any configuration to solve this problem
thanks a lot!

Hi,
The configuration is under Admin-Setup-BP-Address Format. Each country has a built-in format for address initially.
Thanks,
Gordon

BPM console doesn't shows the deployed application in BPM console

Hi Friends,
i developed a BPM process in Jdeveloper and deployed in the weblogic server. Enterprise manager shows that application but in BPM workspace doesn't shows that application to initiate the process form BPM console. any one can you please let me know why the weblogic server shows this peculiar behavior?
Thanks
Hari Mandadapu

Did you create an initiator task with corresponding Task Flow within the BPM Project?
Only when you add an initiator task it will show up in the BPM Workspace.
An initiator task differs from a regular human workflow task.
Otherwise you can only start the process from Enterprise Manager or Webservice Call. Check out if the process show up in Enterprise Manager.
Regards,
Martien

Is there a way to "force-mount" an external drive that doesn't show up on it's own when plugged in with firewire?

Hi, is there a way to "force-mount" an external drive that doesn't show up on the desktop? I have a new Hitachi SATA III 2 TB Ultrastar that won't show up like all the other drives when plugged in. So I can't partition, repair, format etc with Disk Utility, Disk Drill, Tech Tools etc. How do I make it visible?
I use the FW 400 to 800 adapter and a FW hub.
Thanks,
W.

ok, I did find the log in Diskutil of what happened, I just can't figure out why it happened and how to start over:
2014-04-20 13:42:08 -0400: Disk Utility started.
2014-04-20 13:44:30 -0400: Preparing to erase : “Terra 8”
2014-04-20 13:44:30 -0400:           Partition Scheme: GUID Partition Table
2014-04-20 13:44:30 -0400:           1 volume will be created
2014-04-20 13:44:30 -0400:                     Name                    : “Terra 8”
2014-04-20 13:44:30 -0400:                     Size                    : 2 TB
2014-04-20 13:44:30 -0400:                     File system          : Mac OS Extended (Journaled)
2014-04-20 13:44:30 -0400: Unmounting disk
2014-04-20 13:45:00 -0400: Creating the partition map
2014-04-20 13:45:01 -0400: Waiting for the disks to reappear
2014-04-20 13:45:01 -0400: Formatting disk2s2 as Mac OS Extended (Journaled) with name Terra 8
2014-04-20 13:45:26 -0400: Initialized /dev/rdisk2s2 as a 2 TB case-insensitive HFS Plus volume with a 155648k journal
2014-04-20 13:45:26 -0400: Mounting disk
2014-04-20 13:45:29 -0400: Erase complete.
2014-04-20 13:45:29 -0400:
- That was it, gone.....

Rounding off to a variable value to 4 decimal values in sap script ouput

Hi All,
I have a value getting displayed in sap script output as 235.6789 i want to Round off this variable value to 4 decimal values!
What is the formatting option need to be used & how!
Thanks in advance.
Thanks,
Deep.

Hi,
1.In layout just call that variable, where you need like:
&variable(.4)&.
Just see these:
&symbol(Z)& Omit Leading Zeros
&symbol(S)& Omit Leading Sign
&symbol(<)& Display Leading Sign to the Left
&symbol(>)& Display Leading Sign to the Right
&symbol(C)& Compress Spaces
&symbol(.N)& Display upto N decimal places
&symbol(T)& Omit thousands separator
&symbol(R)& Right justified
&symbol(I)& Suppress output of the initial value
Regards,
If helpful reward with points(Don't forget).

Error saving purchase order data decimal values in SAP R/3

sir,
PO was created with currency japanese YEN using Tcode ME21N . The net price was showing 142502300 (in JPY).
when checked in EKPO table , it saved with a value 1425023.00 instead of 142502300 .
what can be done to correct this.
In PO Print out , it showing values as 1425023.00 which is wrong.
SPRO>> NET WEAVER >> GENERAL SETTINGS >> CURRENCY>> SET DECIMAL values FOR CURRENCY CODES is showing 0 decimals against JPY (Japanese YEN)
I want to know where else the Decimal values could have been set to 2 decimal places.
FOr other currencies like US Dollars there is no error.
Regards,
Srinivasa Murthy

Hello Srinivasa
Please check the forum Rules of Engagement - https://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement.
Cross posting is not permitted. This issue is already raised in the application area forum which is probably correct. This does not look like a PI technical issue.
Regards
Mark Smyth
XI/PI Moderator

Folder of Adobe Flash CS4 under Applications doesn't show the Flash logo

I migrated to my new Mac from an old Mac in which I had previously installed Adobe Creative Suite 4 Web Premium which includes Adobe Flash CS4 Professional. After I did that, all the files for the Adobe softwares were in blue and wouldn't work so I reinstalled the DVDs again. All my folders show the logos that correspond to the softwares located in each folder except for the Adobe Flash CS4 Professional which is still in blue. When I click on it to open the software, it works, but it shows this message:
Error initializing Java Runtime Environment. You may need to reinstall Flash. Click OK
It works, but it bugs me that all the other softwares show the logos except for Flash. I tried to run the DVD #1 again, but when it shows all the softwares that you can click on to install, it doesn't show Flash.
Does anyone know how to fix that problem?
Thanks in advance.

you can dl the installation files or copy the files from your disk to a desktop directory.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5 | 1
Contribute: CS5 | CS4, CS3 | 3,2
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

How to show the Characteristics Values of Batch appear upon Search?

Dear all
We are implementing SAP for Wood Industry.
Facts:
1. There are 3 batches created for the raw material.
2. Each batch has the characteristics of Thickness, Width, Length with characteristics value 24mm, 140mm, 1530mm
3. 1 Production Order has been create to produce raw material (RM) to semifinised goods (SM).
Quetions:
During GI to Produciton Order using MVT 261, when we try to select batches from the Item Detail level, the pop up search windows only show us the existing 3 Batch Numbers available for the RM, it does not show the characteristics value "thickness, Width, length" that describe each batch.
And this has caused serious problem to use during their selection of batch as batch number will only make more sense to them if it is shown together with the characteristics value.
Apart of opening additional screen to show the batch information of each batch, is there any config I need to do to solve this situation?
Mark will be given handsomely.
Thanks.

Hi,
it is possible to use another search help (Tab Strip: Search for batches via classes, when you press F4 in the batch field).
Here you have to enter the class number first.
Then you get a list of all characteristics in this class, and you can narrow your selection, by setting values for specific characteristics.
After that, press F8 (Find in initial class)
You will get a list of batches, assigned to the selected class, and fullfilling your selection criteria.
Now you can display either the characteristics of a single batch, or you can define a layout for the ALV-Table control, with all characteristics, which you want to see in the overview.
Another possibility is, to open up the 'batch information cockpit' (transaction BMBC) in a separate mode. Here you can see the characteristics ( if you define a selection class on tab strip 'Characteristics' ), e.g. in combination with stock information, which might be relevant as well.
Here you can download some screenshots (link wiil be valid for 80 days)
Link: [https://sapmats-de.sap-ag.de/download/download.cgi?id=B7BKFOTZKKGJ73YA86VZISCMALG8DTQRTX1YX02892OT1D308Z]
Kind Regards
Michael Franz
IBU Mil Products & Mining
SAP AG

HSlider doesn't show initial decimal values

Similar Messages

Maybe you are looking for