HSlider used for time/ranges

I have an app that needs to program open/close hours. So far
I have a HSlider that starts at 0 and ends at 86400 (seconds in a
day). I can easily convert the second value to a standard date time
value, so all works great as long as I only want standard
open/close functionality. i.e open 8AM close 5PM.
The problem I am running into is being able to have multiple
open/close events in a single day. ie. open 8AM-1PM and 2PM-5PM.
This can be accomplished with setting the thumbCount=4, but what I
can't figure out is how to make the highlight work properly between
thumb 1 and 2 and 3 and 4 with non-highlighted space between 2 and
3.
Anyone have any insight here? I have looked extensively
through the Slider.as file and haven't been able to reverse
engineer to the point of fully understanding what's going on.
Thanks,
Geoff

Standard wretched networking on Mountain Lion.. you are being used as a beta tester.
It is common as dirt.
Read C12 here.
http://pondini.org/TM/Troubleshooting.html
Basically due to poor networking you need to keep rebooting the TC..

Similar Messages

  • I am trying to install Mavericks on my McbookAir, but it won't install, saying that my hd is used for time machine backups. I have an external HD connected to my mbAir that I'm using for time machine.

    2012 Macbk air, with OSX 10.8.5. See my question above. Mavericks won't install on my Air's HD, says that both the HD - AND - the external HD (which has a different name from the laptop HD) are used for time machine backups. I've deleted my time machine plists, restarted, repaired permissions, turned time machine off, repeatedly selected the external drive in time machine preferences. HELP. (Install went perfectly on my desktop Mac, which also has an external HD for time machine).

    I need to add that the only place I have the "Backups.backupdb" folder is on my backup external disk, and it's not on my HD    :-(    . If it were, I'd delete it!

  • Can't install ML. Disk used for time machine

    When I choose my machintosh HD drive to install mountain lion says "This disk is used for time machine backups". HELP!!!

    Although this may be too late for the OP, here's the answer: If you see a Backups.backupdb folder on your main harddrive, either remove it or rename it. That seems to be the only qualifier for calling a disk a Time Machine Backups disk as far as the installer is concerned.

  • I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine

    I want to know about time machine if i can use the hard drive that i use for time machine back up as a normal hard drive too or if it's only for time machine
    and if it yes i want to know if i have 1TB hard disk to use the 500gb for time machine and the other 500gb for normal use

    thank you very much because i am considering to buy the porsche design hard disk 1TB and i want to have it for normal use and for time machine is a pitty to give 1TB for back up only again thanks and i know seperate the back and the working jobs are better but the i have to have 2 hardisks and i want only 1

  • HT201250 How do I find out what portable drive was the drive I used for Time Machine Backup?

    Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup.  I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt.  If I try Back up Now I get message, "Time Machine could not complete the backup.  Back up disk is not available."  I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine.  If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens.  In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
    I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine.  Help please.

    Hi, I have 10.7.4 and need to figure out what drive I was using for Time Machine Backup.  I have three drives and I have connected each of them to my macbook pro, but I get an error, "Time Machine Error, The backup disk is not available" when I hit the time machine icon on the top of the screen and the "backup delayed" prompt.  If I try Back up Now I get message, "Time Machine could not complete the backup.  Back up disk is not available."  I am trying to figure out what the time machine back up would actually look like as a file on the drives but I don't see a folder/file name Time Machine.  If I enter Time Machine I can see in the far right column, in purple, the last back up date (Sept. 12, 2012), but when I hit it nothing happens.  In the Time Machine preference box the select disk has, in red and to the right, "Delayed" with an "i" within a circle, and the option indicates, "Next backup: when disk is connected."
    I know I have a years worth of backups on one of the three drives, but I can't figure out how the heck to find them or how to determine what was the last drive I used for the backups within Time Machine.  Help please.

  • HT5361 I have Snow Leopard on my late model IMac. I downloaded Mountail Lion and paid for it from the Mac Store. It will not install. It takes me through several pages and then button to install is greyed out. A message that this disc is used for Time Mac

    I have a late mode IMac 27" running Snow Leopard. I downloaded Mountain Lion from the Apple Store and paid for it. When I trie to install it took me through the first few pages of installation such as agrreeing to terms and the Lion Page showed up asking where I wanted to intall Mountain Lion. The install button was greyed out. I also had a message this disc is used for Time Machine. I had no other disc to choose from. Time Mahine was in the OFF position. I tried hooking up an external drive and tried using it as th Time Machine Backup. That did not work and it also said this disc is used by Time Machine. I have read of several other cases like this but have found no solution other than doinh a complee wipe of the hard drive and doing a reinstall which I really want to avoid if I can.

    Look at the root of your hard drive for a folder called Backups.backupdb.
    Or, a sparse bundle disk image for one of mobile computers that might have tried to back up to your Mac.
    If you have those, remove them and try again.

  • HT5988 I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I downloaded Mavericks and now my WD Smartware that I use for Time Machine is no longer compatible with this OSX version?  How do I make that unit compatible?  olefromca

    I agree entirely, been messing with this since the upgrade to Mavericks but I didn't find it quite as easy as uninstalling the WD smartware as it still operates when you plug the drive back in - I think it gets loaded onto the drive and runs from within (?). The advice from WD was that time machine was faulty and I should contact Apple...thanks guys!
    Anyway, for the OP's benefit, this is what I found:
    1. My problem was that time machine couldn't see any further back than before the Mavericks install, but if I opened up and interrogated the WD drive, the old backups were still there.
    2. When TM started doing new backups, it overwrote the ones that it could see, not the oldest ones on the drive. This indicated to
    me that the WD software had somehow partitioned off the old backups and excluded that part of the drive from being overwritten. Of course, as the drive was practically full, it meant that any new backups wouldn't fit in the available space.....
    3. The only way I could find to resolve this was to use the disc utility to erase and repartition the external drive. This will obviously remove all of the old files and backups, but I was more concerned about keeping a current profile as backup rather than a load of stuff from months ago.
    4. Anyway, what happens after the eraseure has completed is that you get the WD icon on the desktop, and you're invited to install the software - this means the software has now been deleted. Juts don't reinstall it, just let TM do it's backup and all is well.
    Usual disclaimers and warnings about keeping another copy of your system etc. obviously apply, and I know this is a radical move to delete all your old data but it worked for me. I guess I didn't appreciate that you could use the external drive without the software that came with it and just followed the screen guide.
    I'm also aware that if you don't want to use TM to do a complete restore and only want to find one old version of a document, this is difficult. However, you can then install the WD software and find the file but you'll then have to do this all again.....

  • External hard drive used for Time machine is full and having a hard time backing up. what should I do?

    External hard drive used for Time Machine is full and having a hrad time backing up. What is my best option moving forward? NAS?

    For All things Time Machine see Pondini's Excellent Infirmation here...
    http://pondini.org/OSX/Home.html
    Start with FAQs and Troubleshooting.

  • My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago.`

    My iMac suddenly can't read the backup hard drive I've been using for Time Machine.  I tried unplugging the cord that connects the HD to the iMac and plugging it back in, but I still get "The disk you inserted was not readable by this computer" below which are buttons for Initialize, Ignore and Eject.  I was using a cord that went from larger square plug to larger square plug.  So then I tried one that went from smaller square plug to what I think is USB (thin rectangular plug) of the sort that connects the keyboard and mouse. It's the type that my printers and scanners use to connect to the iMac.  I did NOT just upgrade the OS or anything.  The external HD is an OWC Mercury Elite All Pro. It's worked fine since I got the iMac 4 years ago. What else can I try before just trying to initialize and

    Thanks, Michael!  I do hear it at times spooling up and running. Just after I bumped the thread I looked for troubleshooting for this drive online and found the manual which suggested using Disk Utility which I've seen before accidentally (if I hit Command Shift U instead of Shift U to type "Unit" on a new folder for a student's homework ) but had never really noticed.   Disk Utility does see it and also a sub-something (directory?) which might be the Time Machine archives on the disk, called disk1s2), sort of the way that my iMac's hard drive shows up as 640.14 GB Nitachi HDT7... and has a sub-something titled DB iMac, which is what I named my iMac's hard drive.
    Anyway the owner's manual just shows the image under the formatting section, not the troubleshooting section, but as soon as I saw it in the manual I remembered seeing it accidentally a few times, went to it, and am now verifying the disk.  Right now it's telling me that it will take 2 hours to complete the verification, so I guess I have a bigt of a wait.  :-) 
    Does that fact that Disk Utilities can see it mean it's not failed, or just that it hasn't completely failed? 
    I can see the virtue in having multiple redundant backups, or at least two backups. What do you suggest?  Two external hard drives?  I had this one linked by ethernet, and but I also have a cord that could link it by USB (like a printer), so if this one is reparable I could get a second one and link it by USB.  If this one is not reparable I could get two and do the same thing.  I do have an Airport so I suppose it's possible to get some sort of Wi-Fi hard drive (my new printer/scanner uses only the network and not a cable, although it has a cable that I used for the initial installation), but I'd suspect a Wi-Fi hard drive might have a higher price.
    What hard drives, if any, do you recommend? I seem to recall that when I was looking at external hard drives 4 years ago, Apple's were substantially more expensive, which is why I got the OWC Mercury Elite All Pro.

  • Can you unplug the external hard drive you are using for time machine

    can you unplug the external hard drive you are using for time machine and then plug it back in and it work normals because i have a mac book and don't want to always be carrieing the external hard drive every where i go so can you ?

    Yes, that will work fine. It will back up normally once you plug it in again. I do this with my MacBook.

  • HT4848 Is it possible to partition an external hard drive that is already being used for Time Machine backups without it being erased?

    I'm want to use my current external hard drive, which I use for Time Machine Backup, as a recovery disk for Mac OS X Mountain Lion 10.8.2. From what I have read, the recovery disk assistant will erase all data on the external drive unless it is partitioned. Can I partition my current backup drive without erasing it, even though it is already being used for Time Machine?

    It's very simple to test.  Turn off your computer.  Have your time machine backup plugged in.  Hold option and turn it on, keeping option held.  Do you see your time machine drive?  If so, select it and press enter. You'll end up in recovery.  If it works, there you go.  Then just click the apple and restart to get back to your regular desktop.  Then you'll know for when you're ready to do the deed.
    Edit...
    I'm not sure if time machine will think it's an entirely different computer, though, when a hard drive changed, making an actual restore not doable.  Either way, you could still reinstall mt lion fresh and then just migrate after, skipping the need for SL.

  • Cleaning virus-infected files on external hard drive used for Time Machine

    I am kinda reposting this with some extra explanation since I didn't really get any good respnses on my first post:
    I am running McAfee VirusScan and it locates and cleans virus infected files just fine on my computer, but when it finds infected files on the external hard drive I use for Time Machine backups, it says "Repair Failed". Is there a way to clean infected files on my Time Machine backup drive?
    I had found a virus in several documents on my Mac, which I cleaned, but it seemed to infect a bunch of the files located in Time Machine as well. I know these files shouldn't harm my Mac, but I still don't like having virus infected files. They seem to propagate and I don't want to give them to any of my Windows-using friends.

    Hi,
    Usually (but not always), virus-infected files aren't system-related, so if they cannot be repaired, there should be an option in VirusScan to delete them or quarantine them instead of repairing them. Assuming that you are archiving Mac-related files and not archives of Windows files, then it should certainly be safe to just have VirusScan delete or quarantine them. An alternative is that you could delete them manually. But before you do any of this, be sure to take a look at the filename and its location in the folder hierarchy to make sure that you aren't removing a file that's critical to the operation of some piece of software.
    Hope this helps,
    Ken

  • Lion won't install can't select hard drive that is used for time machine backups

    I installed Lion, agreed to the eula but both drives are greyed out. My Macintosh HD - ( this dirve is used for time machine backups) and my external drive (this drive does not use the GUID Partition Table scheme...). Though I don't use time machine, I tried turning it on and selecting the external drive with no luck. I'm stuck - any ideas?

    "Backups.backupdb" if the file in Time Machine.  As the discussion says, you have to find that file and trash it.  Try spotlight to locate it.  If that does not work, down load OmniDiskSweeper from the Internet (free) and go through an organized search to find "Backups.backupdb".  If that takes too long or is too tedious, then if you have everything backed up, erase the HDD and start from square one.
    Ciao.

  • How do I part ion an external hard drive used for time machine?

    I have a Seagate 1.5 T external harddrive I'm using for Time Machine. I would like to partition it so I can store other files and photos on it. How do I do it??
    Thanks,
    JD

    In Disk Utility
    http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1725.html
    Message was edited by: b j t

  • Mac OS X will not install as it states Mac HD is used for Time Machine backups?

    I'm not sure what is happening?! I wanted to connect my new wireless trackpad but could not as my mac said I needed 10.6 or later. I checked my mac which I thought had snow leopard on but it states it has 10.5.8? I am now trying to re-load mac OS X from my disc as it states it is 10.6 but it will not load as the installer gets to a point where it states that the Macintosh HD is used for Time Machine backups and consequently will not move on to the next stag? Now I cannot even get out of installing or eject the disc! Can anyone help with what I am doing wrong? VMT

    The installer won't load on any HD that contains a Backups.backupdb (used for Time Machine/Backup) folder on it.  If the backup isn't in use, delete that folder and 10.6 will install.
    Regards,
    Captfred

Maybe you are looking for