HT1097 Unable to export movie "because file _ has been moved"?

I just made an entire movie in Imovie 08. When I try to export it, I get a box that pops up that says "searching for File (some number like 8 or 10)", at which point the only button I can hit is "stop". Then another one pops up about how it is unable to locate the file because it has been moved, and then I have the option to Search or Cancel. I've tried "searching", but I have no idea what "File 10" or "File 8" are. I have thousands of video files, and none are labeled that way. So I have to hit Cancel and then the whole export is cancelled.
Its obvously saying my files have been moved, but I have no idea where to...nothing has been moved since I started the project.
Help. I've never had a problem like this before.

jonred wrote:
.. "*Unable to prepare project for publishing*
The project could not be prepared for publishing because an error occurred. (-41)"
error-code# -41 indeed indicates a vague 'memory full' error.
in case, you're using an ext. HDD - is it 'Mac'-formatted? Or fat32, ntfs, etc.?
but this doesn't mean alone the target-disk, but the internal, 'MacOs'-disk too.
things to test:
• simply relaunch your Mac - maybe some 'pointers' are simply .. kaputt ..
• did you partition your internal drive? - if so, the 'macOs'-partition needs at last 20-40 GBs free for any conversion-process.
or is it a 'solid' single partition with some tons of free disk-space?

Similar Messages

HT5262 I am trying to backup my iPhone 4 but iTunes says it is unable to complete backup because the device has been disconnected (but it hasn't). Any suggestions?

I cannot backup my iPhone 4 to iTunes because it says the device has been disconnected during "Step 5" (syncing purchases) but my phone is still connected. iTunes is up to date, I don't want to install iOS 6.0.1 until I backup my phone (when I installed iOS 6, I lost everything and had to restore to previous backup. Would hate to not have a more current backup and lose everything again). I have tried uninstalling and reinstalling iTunes and still the same problem. Please help!

You have to delete the corrupt back-up so iTunes can at least back-up the current data on the iPhone and then restore it. Search these forums, there a several good posts on how to delete the corrupt back-up.

Picked up older powermac G4 from a garage sale. Can not do any updates because owner, that has now moved did not wipe it clean and I need a password to do anything. Is there a way to restore to factory default and make myself admin?

Recently purchased older powermac G4 at a garage sale. Unable to do anything because owner, that has now moved, did not wipe it clean and everything I try to do requires his password. Is there a way to restore to factory default, make myself admin and reset password? Hoping this purchase wasnt a complete waste of my time and money.

Here's the instructions if you have the discs.
Mac OS X: Changing or resetting an account password
http://support.apple.com/kb/HT1274?viewlocale=en_US
Changing your administrator password
http://docs.info.apple.com/article.html?path=Mac/10.4/en/mh655.html
Here's one method to reset the password without the install disc:
1. boot computer and hold the "apple" key and the "s" key.
2. wait for terminal show
3. release keys
4. type without the quotes: "/sbin/mount -uaw"
5. press enter
6. type without the quotes: "rm /var/db/.applesetupdone
7. press enter
8. type without the quotes: "reboot"
9. press enter
This will let you create a new admin account when you reboot your computer.
Also, without the discs, look at Mac OS X Tip - No Password, No Root, No CD? No Problem.
http://www.macobserver.com/tip/2003/06/16.1.shtml
Here is a way to get around not knowing the admin password on Macs.
To reset your OS X password without an OS X CD you need to enter terminal and create a new admin account:
   1. Reboot
   2. Hold apple + s down after you hear the chime.
   3. When you get text prompt enter in these terminal commands to create a brand new admin account (hitting return after each line):
          * mount -uw /
          * rm /var/db/.AppleSetupDone
          * shutdown -h now
   4. After rebooting you should have a brand new admin account. When you login as the new admin you can simply delete the old one and you’re good to go again!
Not sure is this will work on a Mac running OS 9.
 Cheers, Tom

Microsoft Office 2008 Powerpoint "cannot open the file because it has been moved or deleted"

I am trying to open some slides my professor posted on Desire 2 Learn. It is a .pptx file. Everytime I try to open it I get an error message that says, "Powerpoint cannot access +I (drive) beacuse the file has been moved or deleted"
I have uninstalled and reinstalled Office. And yes, I know just moving it to the recycling bin does not fully uninstall it. I followed the directions given in a different thread. Any help would be greatly appreciated. Thanks.

You may get better answers asking this question in Microsoft's support forums.
Best of luck.

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel rec

I'm using acrobat pro in my project after debuging the project and after opening a certain number of PDF files I receive the message: the maximum number of files opened has been reached, you have to close some files to continu.even doing that, I steel receive the same message.Some one can tel what to do please? Thanks

Hi Memalyn
Essentially, the bare issue is that you have a 500GB hard drive with only 10GB free. That is not sufficient to run the system properly. The two options you have are to move/remove files to another location, or to install a larger hard drive (eg 2TB). Drive space has nothing to do with SMC firmware, and usually large media files are to blame.
My first recommendation is this: download and run the free OmniDiskSweeper. This will identify the exact size of all your folders - you can drill down into the subfolders and figure out where your largest culprits are. For example, you might find that your Pictures folder contains both an iPhoto Library and copies that you've brought in from a camera but are outside the iPhoto Library structure. Or perhaps you have a lot of purchased video content in iTunes.
If you find files that you KNOW you do not need, you can delete them. Don't delete them just because you have a backup, since if the backup fails, you will lose all your copies.
Don't worry about "cleaners" for now - they don't save much space and can actually cause problems. Deal with the large file situation first and see how you get on.
Let us know what you find out, and if you manage to get your space back.
Matt

ALBPM 6.0 : The maximum size for file uploads has been exceeded.

Hi,
I use AquaLogic BPM Entreprise server to deploy my Process. When I try to publish a process on my server I get the following error:
An unexpected error ocurred.
The error's technical description is:
"javax.servlet.jsp.JspException: null"
Possible causes are:
The maximum size for file uploads has been exceeded.
If you are trying to publish an exported project you should publish it using the remote project option.
If you are trying to upload the participant's photo you should choose a smaller one.
An internal error has ocurred, please contact support attaching this page's source code.
Has someone resolve it?
Thank's.

Hi,
Sure you've figured this out by now, but when you get the "Maximum size for file uploads" error during publish consider:
1. if your export project file is over 10mb, use "Remote Project" (instead of "Exported Project") as the publication source. That way when you select the remote project, you will point to ".fpr" directory of the project you are trying to publish.
Most times your project is not on a network drive that the server has access to. If this is the case, upload the .exp file to the machine where the Process Administrator is running, then expand it in any directory (just unzip the file). Then, from the Process Administrator, use the option to publish a Remote Project by entering the path to the .fpr directory you just created when unzipping the project.
2. Check to see if you have cataloged any jars and marked them as non-versionable. Most of the times the project size is big just because of the external jar files. So as a best practice, when you do a project export select the option "include only-versionable jars", that will get reduce the project size considerably (usually to Kb's). Of course you have to manually copy the Jar files to your Ext folder.
hth,
Dan

ORA-39095: Dump file space has been exhausted

Hello Friends,
DB Version : 10.2.0.4
OS : SUN Solaris 10
We have a server with 10 RAC databases running on it. From 1st node we have a scheduled export job for all the databases. All the databases are using a common script and we are passing parameters (example as below)
/opt/oracle/admin/DBA/dbatools/expdpdb.sh -d w111pr1 (here w111pr1 is the SID)
Out of 10 databases, full export job is working fine for 9 databases. only for 1 database (which i mentioned above), export is failing with below error
ORA-39095: Dump file space has been exhausted: Unable to allocate 16384 bytes
Job "OPS$ORACLE"."SYS_EXPORT_FULL_39" stopped due to fatal error at 00:06:13
After analyzing I found that in the script we are not using '%U' option for dump file which might cause the problem. But if this is the real issue, it should fail for other 9 databases also. But even without '%U' option, it is working for other databases.
One more thing.... all the export backups will run in a difference of 1/2 hour. Do we need anything with OS processes?
Anyone faced this kind of issue earlier? If so please let me know what can be a better way to handle it.
Thanks in advance...
P.S: export is executing fine when issued manually.

what are your dumpfile, parallel and filesize parameter values in the shell script? does the shell script has one size fits all parameter settings? Also are there any other errors? Can you share the expdp command ?
Edited by: rjamya on Jun 7, 2012 4:41 AM

FCPX, How do I reconnect a video file that has been modified or over written?

FCPX, How do I reconnect a video file that has been modified or over written?
As an animator, I am constantly modifying and overwriting movies files that have already been imported into the Final Cut time line. In FCP7, I could easily modify and update movie files and have those changes appear in the timeline without the need to reimport and re-edit those clips, but FCPX seems to lose it's connection with any modified or overwritten file, making all the editing work I've done to these files worthless.
Does anyone know of a way to reconnect to a modified or overwritten file? Because, this one single issue makes FCPX completely worthless to me.
Andy Murdock

If you import the new clip , select it and drag over the old offline clip , you can choose from the menu ...

Can you track a form if the file name has been changed after distribution?

I created a form in Adobe Acrobat X Pro -- I then used the distribute feature and sent the form to myself using the internal server. After testing the form, and making sure all was good, I copied the attachment from the email I received when I distributed the form to myself, and sent it to my boss (via outlook). He then changed the file name, and sent the form out to our members. Our members are completing this newly-changed document instead of the original form. They are able to "Submit The Form", and it still looks as though its coming back to me via the dialogue box. However, I have no received any responses in my original document's tracking. When I tried submitting this new form myself to see what happened, I just received an message that says "Your response is being queued for submission", but it never tells you whether the form was actually submitted or not. Is there any way that you can track this form even though the file name has been changed? And if people are submitting their forms to me, where are they going?
Please help!
thanks,
desiree

I understand that you don't want to redo all the linking with the markers. You can try following (make a copy of your project first to be safe) :
- close your project and quit DVDSP
- move your old asset, and replace it with the new one
- reopen your project
A warning message should tell you that this asset has changed, but your marker will remain at old position. If the asset length are not the same, old length information will be used by DVDSP. To correct this, delete the asset from the timeline, and drop it back to the timeline.
Now you just have to move the marker to the right position.

I have just subscribed to Adobe Export and my debit card has been charged but I cannot convert a pdf into a word format on my mac. Does it take time to process? I have purchased the package about thirty minutes ago?

I have just subscribed to Adobe Export and my debit card has been charged but I cannot convert a pdf into a word format on my mac. Does it take time to process?

Hi nickel13,
What is the problem you are facing?
Is this happening with a single PDF file?
Regards,
Florence

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

My iMac suddenly no longer connects to wifi network when in KIOSK (username) mode, and only connects when as ADMINISTRATOR mode. Its strange because the iMac has been working fine in KIOSK mode for over a year until 2 days ago.

One of the memory cards was indeed faulty, and the other completely fine
Thanks very much for all your help!
Although there is one little thing that I've noticed. The iMac works properly, but I tried to software update to see if that may help my Minecraft sound issue (as I still don't think only having 2GB instead of 4GB would cause such a problem) but the software update application won't work. Running the "Software Update" from the apple menu on the toolbar gains no response, nothing happens. If I run the software update from system preferences, the application icon appears for a second, then disappears (as in the blank app. icon, the blank canvas with the pencil, pen and ruler in the bottom right corner). It does this every time I try to run it. It did work when the computer was crashing, but this started when on one of the occasions I ran the app. while it was crashing. Since this occured during the crashes, and still occurs now, I'm wondering did something simlar happen minecraft, as it's sound disappeared during the crashes and is still gone now.
However, the computer is now working again without crashes, which is the main thing, thanks for helping me fix the issue
Edit: I would mark the topic as solved, but I'm unsure if this would lock the topic or something simlar, so I'd rather leave it open for any ideas regarding the software update and Minecraft issues I'm having

In the icloud settings, i am told i need to accept the terms and conditions to use icloud, but when i try to do so, i get a message "unable to connect to server". This has been going on for a week. There is no problem with either my wifi or cellular conne

In the icloud settings, I am told I need to accept the terms and conditions to use icloud. However, when I click on "Terms and conditions", I get a message "unable to connect to server". This has been happening for a week now since I upgraded to iOS 7.06. There is no problem with my wifi or cellular connectivity, all other applications work perfectly. P.S.I have never used icloud before, but wish to do so now. How do I overcome this problem?

Have you turned the iPad off then back on? That often helps with problems.

Cannot install trial for Adobe Acrobat XI Pro on my computer - After I select download, I receive this message: This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance.

Cannot install trial for Adobe Acrobat XI Pro on my computer - After I select download, I receive this message: This application cannot be installed because this installer has been mis-configured. Please contact the application author for assistance. Have tried doing so from multiple browsers.
Please let me know how to download the trial version.
Thank you.

Try downloading Acrobat Pro XI using below link. Then try to installing it once again.
Download Acrobat products | Standard, Pro | XI, X

How do I open a pdf book cover file using Acrobat XI into Indesign CC? Everytime I try, it says I am trying to open a file that has been saved wrong.

How do I open a pdf book cover file using Acrobat XI into Indesign CC? Everytime I try, it says I am trying to open a file that has been saved wrong.

PDF files cannot be natively opened in InDesign. They can only be placed as graphics.

How do I edit the text in a pdf file that has been converted to a Word doc

How do I edit the text in a pdf file that has been converted to a Word doc?

Hi BridgetteJean,
Please go through this video this explains how to edit text in a pdf document.
http://tv.adobe.com/watch/acrobat-tips-and-tricks/editing-text-with-the-typewriter-tool/

HT1097 Unable to export movie "because file _ has been moved"?

Similar Messages

Maybe you are looking for