HT1212 if i have did all that yall told me to and it dont work what do i do with it
if i have did all that yall told me to and it dont work what do i do with it
Call Apple.
Similar Messages
-
hi, i was jsut wondering how i can keep music on my ipad without itunes wantting to delete it i dont have the music that is on my ipad on my laptop and i would like to keep it on my ipad. but i would also like to add my laptops music to it. can you help me?
my music on my ipad is not all from itunes.Open itunes, connect iphone,select what you want, sync
-
No matter what answer i have tried after researching it is still not letting me download any docuements
4.2.1 is the end of the line for the iPhone 3G. If you're not there yet, connect your phone to iTunes on your computer and upgrade.
-
TS1702 i have an app that keeps trying to load. I dont know what it is.
How do I get rid of it?
What do you mean "it keeps trying to load"? Apps only load when you tap their icon. Is the app frozen?
If so, see: http://www.lifehacker.com.au/2012/04/how-to-force-quit-an-unresponsive-ios-app/ -
?I'm trying to download a free app and I keep getting a message that says; "Payment Type paypal is not supported on this device blah blah go to the iTunes Store on your computer. You must verify your payment info before you can make purchases. I did all that, updated payment info and checked paypal it is verified, and it still won't work. Im stumped
If you still have problem, contact iTune Support
https://ssl.apple.com/emea/support/itunes/contact.html -
I tried to download a form from my doctor's office and got a message that I had to install adobe reader, accept the end-user agreement, quit and relaunch. I did all that, to my understanding of those words which could be wrong, but still have the same message. Please help.
The key word is "launch", the Apple word for "run an app". You must run an app from Applications
-
! started to update my system and was told to restart. I did. it has now been about 6 hours and all i see is an apple and a rotating circle. what is happening?
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Step 3
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 4
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 5
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 6
Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
Step 7
Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
Step 8
A dead logic-board battery in a Mac Pro can cause a gray screen at boot. Typically the boot failure will be preceded by loss of the startup disk and system clock settings. See the user manual for replacement instructions.
Step 9
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested. -
My storage is mostly full of a category labeled "other." I'm out of memory to the extent that it won't even allow me to update apps. I have moved all photos over to my computer and my music streams through the cloud. Any advice on how to fix this problem?
http://discussions.apple.com/thread/3418045?tstart=60
-
when i did all that shows up in disk utility now is something called expansion and all my opitions are greyed out in the partation tab, it doesnt mount and idk what to do please help.
Running macbook pro 2.53ghz late 2010
mountain lion
8gbs memI would try it on a PC and see if you can format it, then put it back on the Mac and try again. If it's not seen on a PC, then there's the strong likelihood that there's a hardware issue; either the bridge/chip set or the HD itself is dying/dead. There's also the small possibility that the cable is faulty, so I'd try a different cable too.
-
I have just updated to i0S on my iphone and have lost all my Contacts- when I try and sync from my computer it says that my Contacts have been disabled - help!
Have you tried the usual cures such as resetting your phone or backing it up then restoring from the backup?
-
just got my new iphone4 but nothing is happening. all that appears on the screen is an itunes icon. what should i do now. i have connected it to my laptop and have opened an itunes account. help
That voucher only works in the country in which it was purchased. Are you trying to use it in another country?
-
deleted bunch of stuff and pictures and close things not in use i have 889mb wired 1.94gb active 323mb inactive and 879mb free idk what that all means but hopefully someone can tell me. is there a program i can use and fix it or if its easy can i do it myself
macworld.com/mac-troubleshooting-what-to-do-when-your -computer-is-too-slow.
Basically... Make sure you have enough Free Hard Drive space for your Mac to Perform as expected... -
I have files that say they are missing or offline. I have checked all my folders off of lightroom and they can not be found. I have used the ? mark settings to find and still not found. I can see the images on lightroom so they have to be in my system some how. How can I retrieve these images? Is there a re boot for lightroom? Need help ASAP!
You have probably moved the files outside of Lightroom. The images you see in LR are previews that were made before you moved the files.
Do a search for the files/folders using your computers operating system. (Explorer/Finder)
Once you have found them, you can point LR to the right location. -
i bought an iphone 5 second hand and was told all i had to do was sync it with itunes i did all that but previous owner hasn't removed the device from their account, i am unable to contact them..can anyone tell how i can start using my phone pls
Fanta Pants wrote:
i bought an iphone 5 second hand
The Apple ID and Password that was Originally used to Activate the iDevice is required.
If you cannot get this information from the seller
Removing a device from a previous owner’s account
You need to return the Device for a refund, as you will not be able to re-activate it. -
I have deauthorised all my computers in the store and after that authorise a new phone. Now i only have 1 devices authorised out of 5. But when i sync, it keep prompt the message ask me to authorize my computer.
Please help me.You import them as you would with any digital camera.
Import photos and videos from your iPhone, iPad, or iPod ...
Maybe you are looking for
-
Have itunes and nano, can i put the same library on new ipod touch
hi. do i just hook up the new ipod touch and sync whatever i want from the itunes library that i already had and been using with the ipod nano, which will still be used also.
-
When you add a new tab, one can go to the navigation bar and click on the down arrow and get a choice of previous sites. I want to EMPTY that list. I cant out how to do it.
-
I tried to cancel my subscription from Adobe. I was signed up using another website as i was trying to download a book and it took me to Adobe where I had to sign up. And of course it bills annually. It is hard to find how to cancel but when I finall
-
How to change billing date in S1 - cancellation billing document
Dear Friends, Could you please tell How to change billing date in S1 - cancellation billing document which is even not released to accounting & in gray mode. Is it possible? Thanks in advance. Ranjan
-
DDL Replicate Oracle 10gR2 to SQL Server 2005
Dear Gurus, I have configured OGG and it had succeed to have DML transaction from Oracle to SQL Server. now i'm configuring DDL replication but have problem when i tried to start replicat program in SQL Server 2005, the status is abended. the log sho