HT1338 Having difficulty printing with my HP Photosmart 7510 C311a after Maverick upgrade. Tried to install new HP drivers, but thwarted by demand for address under IPVA.
Having difficulty printing with my HP Photosmart 7510 C311a after Maverick upgrade. Tried to install new HP drivers, but unsuccessful.
It did not work after all...
@CHH: This is wheere I downloaded the printer drivers:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=nl&lc=nl&dlc=nl&soft wareitem=mp-84878-2
Good luck and keep us all posted on how you're doing with this problem!
Message was edited by: willem69limbo
Similar Messages
-
I am having some problems with downloading, possibly settings are incorrect, esp. flashplayer upgrade will not install - i have iMac 8.1 osx v10.5.8 - processor: 3.06 ghz intel core2 duo mem: 2 gb 800 mhz ddr2 sdram - i am considering making an appt with Apple store nearby since we have a few in vicinity but thought i would give the online support a try.
The latest version of Adobe FlashPlayer can be obtained from here:
http://www.adobe.com/shockwave/download/download.cgi?P1_Prod_Version=ShockwaveFl ash
You can check here what version of Flash player you actually have installed: http://kb2.adobe.com/cps/155/tn_15507.html
You can check here: http://www.adobe.com/products/flash/about/ to see which version you should install for your Mac and OS.
You should first uninstall any previous version of Flash Player, using the uninstaller from here (make sure you use the correct one!):
http://kb2.adobe.com/cps/909/cpsid_90906.html
and also that you follow the instructions closely, such as closing ALL applications first before installing. You must also carry out a permission repair after installing anything from Adobe. -
Why can't I print with my HP Photosmart D 5460 after downloading Lion
My printer doesn't work. The mac recognises it but now printing is coming throug
HP printers tend to have long names. Try renaming your printer to something more simple.
Click on System Preferences in the dock or from the menu after clicking the apple icon (top left)
Under Hardware choose Print & Scan
Right-click or Ctrl+Click on your HP Printer and choose rename printer
Type a new name e.g. My Printer (you can also add a location if you wish)
Then click OK -
My Macbook Pro won't print with my HP Photosmart 7515. I get the following message, " Print file was not accepted" Printer does work with our PC?? Checked for software updates and are none. Talked with HP help and they say it's an Apple problem
I noticed that you said you uninstalled the printer, but you didn't mention resetting the print system. Resetting the print system will reset the drivers the Mac has installed and make them work like they should. Give this a try and see if it gets the printer working like it should. The document below will expalin more about doing this.
Basic Printer Troubleshooting Steps for Mac
If that doesn't help, see if you are using the AirPrint driver, or the printers driver. By default 10.8 uses the AirPrint driver if the printer supports it, so I'm betting that's the driver you're using. If it is, try using the driver for the printer itself. To do this, access Print and Scan. Click the + sign to add a new printer. Select the printer from the list. Click the dropdown next to Use and select the 7515's driver. Let me know what happens.
I am a printer tech for HP. -
Printing invitations on HP photosmart 7510
I have invitations to print on my HP photosmart 7510 but there is no option for custom paper size or anywhere I can select the card stock size 5.25 x 7.75. When I load the paper in the main tray and print it gives me an error message that the paper size is a mismatch and if I keep pressing ok it will print but not in the center.
I have spent so many hours researching this with no solution. Help would be so appreciated. Many thanks!Generally speaking newer drivers have stream-lined paper options, however you ususally can go back to an alternate driver which gives you thos options back. Check this link and see if it resolves your issues :
http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-Drivers-e-g-Windows-8/How-to-Assign-Alterna...
-Spencer -
Hello sorry but im having a problem with my apple id it appears that i cant download nothing i dont know why but when im going to download something example facebook it appears de app that is charging and then desapere how can i fix that?
Hi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
-Griff W. -
have recently had problems with itunes freezing on me so having done various things to remody it , im now going to try to create a new user account but i cant find where to start things ! ive been told to go to the start menu but where the heck is it ?
Leigh...
but cannot do this because I cannot access Mac App Store
If you can't access the App Store from the Apple menu, Dock, or Applications folder installing the Mac OS X 10.6.8 Update Combo will reinstall the App Store for you.
It's ok to do this even you are already running v10.6.8.
Plants vs. Zombies, and that is all for additional software on here
FYI: Some third party software can cause issues with the App Store > Mac App Store: Sign in sheet does not appear, or does not accept typed text
Apple is not responsible for incompatibility isssues with third party software. -
Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
Lydang
<E-mails Edited by Host>Hello Apple, I'm having a problem with activating my iPad 4. I created iCloud account which differs from Apple account but I now forget my iCloud password. How can settle it ? Thank you so much.
Lydang
<E-mails Edited by Host> -
My canon 1025IF is printing with a black streak down the middle. I tried a new toner cartridge
my canon 1025IF is printing with a black streak down the middle. I tried a new toner cartridge but no luck. Help?
Hello leighbeec.
Unfortunately, if the issue persists after cleanings have been done, additional troubleshooting will have to be done to narrow down the cause of your issue. Please contact our support group using the link below for additional assistance.
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well. -
After mavericks upgrade unable to connect to printer
After mavericks upgrade on one of my two 2013 iMac, when I try to print anything on my network printer and plotter I always obtain this message: "unable to connect to printer" than printer pause and got "pronto per la stampa" (ready to print in italian).
I have a EPSON STYLUS PHOTO 1290 A3 color inkjet printer and an HP designjet 500 plus 24 plotter connected to a Windows XP machine under a Windows XP network.
Trying to print from the seconf 2013 iMac with OS X 10.8 (NON OS X 10.9 Maverocks upgraded) everything goes as usual ant printer works well as from other two Windows XP machine on the same Windows network.
Then apparently the "unable to connect to printer" problem is up to OS X 10.9
Any suggestion?
scm962
StefanoTHis helped me. Had to share this!
Go to this link: http://macs.about.com/od/printersharing/ss/Printer-Sharing-Share-Your-Windows-7- Printer-With-Your-Mac_5.htm
Things to Keep in mind and setup first if your Server which your printer is connected to is a Mac Desktop like mine, otherwise the above instructions will not work:
1) Make sure to have firewall set either to "Off", but if "On" then make sure set to allow SMB, Printer Share, and other devices. Thats a Biggie! (I suggest you Test first that you're indeed able to connect first to your Mac desktop server using the smb://YourServersFileSharingAddess.local, or cifs://YourServersFileSharingAddess.local. If you're not able to connect to your servers hard drive from your Laptop, then the printer setup will not work! So resolve this first and make sure you can connect using the mentioned protocols.
2) When you see that you're able to connect, then go to your printer setup and follow the above links suggestion. Just make sure that when you enter the ip address which it suggest, that its the same ip or location name of your mac server which your trying to connect to, ie... (YourServersFileSharingAddess.local/NameOfPrinterConnectedToServer). Keep in mind that it is case sensitive and that if you have spaced in the name of the printer, its better and easier to just rename it and cut it down to just one name...no spaces! But if you must have the spaces, then use %20 to fill those spaces, ie... "My Printer name" change to "My%20Printer%20name".
Then watch the magic! -
Problem with"Evaluate User Policies"sch task after the upgrade OIM R1 to R2
Problem with "Evaluate User Policies" scheduled task after the upgrade from OIMg R1 to OIM 11g R2
After the upgrade process is completed we are having issue with Access policy not triggering if rule is set to custom attribute
- We had a Rule with custom attribute (Policy='Full-Time') the value gets populated by event handler which triggers the access policy in OIM 11g R1.. which worked fine in OIM R1
After the upgrade the value is getting populated but even after running "Evaluate User Policy" the Access Policy is not getting triggered.
We tested creating a rule with other custom attribute,policy does not trigger even after running Evaluate User Policy schedule Task in this case too
but if we try creating rule with OOTB attributes(Country='US') it works fine the access policy got triggered after running Evalute User Policy
One more issue we observed is
- Evaluate User Policy value usr_policy_update is not updated still set to '1' even after the Access policy got triggered (as it worked when rule is set to OOTB attribute)
I believe after the evaluate user policy gets triggered for a user it should update the value from '1' to '0')
Please let me know if you have any idea..Thanks!well, I overcame the issue by 'fooling' the installer: on second node, change the scan ip address to point to something else (ie, different ip address to the scan in the first node, cleanup then rerun root.sh, it went past the trouble stage, then I still have problem later at the time database creation. I think scan ip address has to be setup correctly (round robin thingy)
This is how i did the cleanup before rerun root.sh
/u01/app/11.2.0/grid/crs/install/rootcrs.pl -verbose -deconfig -force -
How do i set up an email address for an hp photosmart 7510/c311a.
it looks like an email address was an assigned during printer setup - or if it was, i can't find it. the printer is a photosmart 7510 / c311a. when i go to the eprint center to create an account, i get a forbidden -403 error message. any guidance would be much appreciated?
These steps typically resolve the issue:
1. Press the ePrint button on the printer's front-panel screen (top row of icons, far left button), then press "Print Report".
2. Head over to the ePrintCenter website (http://www.eprintcenter.com/), and log in (or sign up for a new account if you don't have one).
3. Click the "+Add Printer" button and enter the printer code from the ePrint info page (“Print Report” page from step 1). Create a customized ePrint email address.
I just viewed the website on my computer, and it appears to be working okay on my end. It's possible that there's a setting in your web browser responsible for what you're seeing. I would recommend trying the following steps:
1. Try to view the site in a different web browser to see if that's the issue. Normally, Internet Explorer, Google Chrome, Firefox, and Safari all display the website properly. Try one or two of those (other than the one you've been using) and it should do the trick.
2. If that doesn't work, try resetting Internet Explorer's default settings by clicking "Tools" (on the top menu bar), "Internet Options" (usually at the bottom of that list), "Advanced" (far-right tab), and "Reset" (towards the bottom-right of that box). After resetting the defaults, try viewing the ePrint Settings area again.
If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
Although I work for HP, my posts and replies are my own opinion and not those of HP. -
im trying to install new version of itunes in my macbook but always failed.i can download it but failed to install and always says to contact with software manufacturer for assistance...please heblp me i couldn’t connect my iphone to iktunes..please coz in my mac their is old version of i tunes.....
Welcome to the Apple Support Communities
See if your computer is supported > http://support.apple.com/kb/sp575 Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard Then, make a backup, insert the DVD and upgrade. Finally, go to > Software Update and update to the latest version.
If your computer is compatible, you can use Mountain Lion. Open App Store and purchase Mountain Lion. Check if your programs are supported > http://www.roaringapps.com -
I have a CC Photography License and tried loading the new Lightroom cc but it will not open (only flashes the welcome screen for a split second) then goes blank. I tried uninstalling it, rebooting, etc. several times and it will not work on my Mac with Yosemite. Please help!
Check out this thread: Downloaded Lightroom CC but only get a quick flash of the startup screen then nothing, Lightroom 5 still working.
-
i tried to install itunes 10.5 but recieved an error msg saying there is a problem with this windows installer package
i am trying to update my iphone 4 to ios 5 therefor require itunes 10.5 the installation process then rolls back and closes with no further explanation can anyone help?There are numerous threads discussing errors with 10.5.0
can't install itunes 10.5
***Fix for iTunes 10.5 Install on Win7 64bit***
Maybe you are looking for
-
Deploying oem grid control to e bussiness suites
We have installation of EBS R12, the AMP pack for EBS system is installed on the and already running. Now we want to use oem grid control to manage the EBS suites. We have installed the eom 11G grid control and installed the application management pa
-
/4xx wage type error in Payroll Reconciliation Report - wta C941
We recently updated our 6.04 system to SP74. Now when we run a Payroll Reconciliation Report with wage type application C941, we get a hard error message as follows: "You must include the corresponding /4XX wage type". Also same error on CCW2 and
-
Apple Air Port / BT Wifi issue.
Hi, I have an ongoing issue with a stretched network. Once any ipad or phone joins the network from the AP express it can't join the network from the extreme. The setup is as follows An airport extreme in my office linked into a 2wire BT r
-
I have tried restoring from backup via itunes but it said error occured I cant do anything.. Help mee??
-
Acrobat Elements.exe memory could not be read
Every time I right click on either a Word or Excel document and select Convert To PDF, it immediately gives the error: Acrobat Elements.exe - Application Error - The instruction at "xxxxxxx" referenced memory at "xxxxxxx". The momory could not be "r