HT1338 I have an I Mac from 2006 and I recently had the hard drive replace and now I'm trying to connect my HP Offiejet J5750 and it does not work.
I have an I Mac from 2006 and I recently had the hard drive replaced and I'm trying to connect my HP Officejet J5750 and I'm having trouble doing so. Please advise.
Hey chukrking,
Thanks for the question, and welcome to Apple Support Communities.
The following article provides relevant troubleshooting information for your issue:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
USB printers and Bonjour-enabled network printers
Follow these steps until the issue is addressed:
1. Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
2. Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
3. Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
4. Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
5. Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
1. Reset the printing system, then add the printer again.
2. If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
3. Contact the printer vendor or visit their website for further assistance.
Thanks,
Matt M.
Similar Messages
-
I RECENTLY HAD THE HARD DRIVE REPLACED ON MY MACBOOK PRO 8.1 UNDER WARRENTY NOW I FIND I CANNOT INSTALL I LIFE FROM MY ORIGINAL DVD my original os was 10.6.7 now running 10.6.8
Download & install this:
http://support.apple.com/kb/DL1512 -
Help me reinstall Iphoto. Apple states that I already have it but since I had my hard drive wiped I don't have it and can't reinstall it...
If you're running Lion then the iPhoto version at the App Store will not work for you as it only runs on Mavericks. What version did you have before this happened?
What system came preinstalled on your MBP? If it was Snow Leopard or earlier then you should have disks that came with your MBP that iPhoto can be installed from. If it was Lion or later then you'll need to contact the App Store personnel via the link in this screenshot,
and see about getting an earlier version of iPhoto, i.e. iPhoto 9.4.3 or earlier.
Or you could upgrade your system to Mavericks for free and then purchase iPhioto 9.5.1 from the App Store.
OT -
When my hard drive was replaced by Apple, I had to re-install iTunes myself. Then I noticed that there was a question mark on my dock where the App Store Icon was supposed to be. I did a software update, and now the question mark is gone. How do I get the App Store Icon back on my dock?
Locate it in the Apps folder and drag it to the dock.
-
Just had my hard drive replaced but now dont have iPhoto garage band ect the stuff i had on the computer when i bought it.
Reinstall them from your original install disks or your backup.
-
i have recently had my hard drive replaced due to a fault whilst in Germany working. Happy with the replacement, however when i go to log on as a user that screen is in German? Any idea how to change the language?
Greetings Lex,
Kind of you to comment ... but you are also adding years to my signature! I know I'm 76 but I don't want to think about it.
Regards 71. -
Hi i bought a Macbook Pro 8 & a half mounths ago.Today i had the hard drive replaced as it was faulty and on Monday i have to take it back to the Apple shop to have the Motherboard replaced. I feel that i should be asking for a new macbook, where do i stand.
Yes thats what i thought but i only have 77 days left on my garentee so its a worry, and have to drive 1 hour to get to closest Apple shop, spent the whole day there today when i should have been at work and have to make the drive again on Monday Then back again next Friday to pick it up. I paid over £1000 ponds for this computer so wouldnt expect it to have its insides replaced befor a year. Feel very let down, and no longer love my macbook pro.
-
My mac won't recognise my new belkin hub hardware. Any Suggestions? It used to recognise it before I had the hard drive replaced and now it doesn't.
Pull out all of your USB devices, and reboot. Now, replace the USB devices they way you'd like them to work. That reassigns the devices so you can use them again.
Respond here...I'm interested how this turns out. -
How to start up laptop from grey screen with circle and slash through it?
After you installed Yosemite and prior to restoring from the backup, were you able to start the Mac?
-
I've recently had my hard drive replaced in the Apple Store.
I used time machine to backup and after I got my mac back with the new hard drive I restored all my files which are now on my computer and I can access it with no problems.
The problem is that I've changed my username (admin) and when I enter time machine, I can't access the backups of my old hard drive which is really frustrating.
A red negative sign appears on most folders. Also in macintosh HD/users there is a folder named with my old username and I get the same red negative sign in the folders.
Any idea what can be done about this?
If you need more info just ask.
Thanks in advanceTurn Time Machine OFF temporarily in its preference pane. Leave the window open.
Navigate in the Finder to your backup disk, and then to the folder named "Backups.backupdb" at the top level of the volume. If you back up over a network, you'll first have to mount the disk image file containing your backups by double-clicking it. Descend into the folder until you see the snapshots, which are represented by folders with a name that begins with the date of the snapshot. Find the one you want to restore from. There's a link named "Latest" representing the most recent snapshot. Use that one, if possible. Otherwise, you'll have to remember the date of the snapshot you choose.
Inside the snapshot folder is a folder hierarchy like the one on the source disk. Find one of the items you can't restore and select it. Open the Info dialog for the selected item. In the Sharing & Permissions section, you may see an entry in the access list that shows "Fetching…" in the Name column. If so, click the lock icon in the lower right corner of the dialog and authenticate. Then delete the "Fetching…" item from the icon list. Click the gear icon below the list and select Apply to enclosed items from the popup menu.
Now you should be able either to copy the item in the Finder or to restore it in the time-travel view. If you use the time-travel view, be sure to select the snapshot you just modified. If successful, repeat the operation with the other items you were unable to restore. You can select multiple items in the Finder and open a single Info dialog for all of them by pressing the key combination option-command-I.
When you're done, turn TM back ON and close its preference pane. -
Can someone please help me re-install my Creative Design 5.5 on my Mac? My MacBook Pro recently crashed and had to have the hard drive replaced. The back up from Time Machine is not reinstalling the program. Since I have the download paid, and codes, I need direction on how to reinstall -- HELP?
Hi bodegakc,
If you have the serial number then please use the below mentioned link to download the product you are looking for .
CS5.5
Also before installing Please go to Applications-->Utilities--> Adobe installers and if there is any uninstaller for CS5.5 , you can remove it and do a fresh install.
You can also use creative cloud cleaner tool before installing.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Thanks
Nikhil Gupta -
I had to have the hard drive replaced on my computer and i lost all my iTunes data and I hadn't backed up my music. can I still transfer music from my iPod to a new iTunes?
Music Rescue also works as far as restoring your playlists etc. I've used it twice, you can use the Quick Recover mode, but have to click continue trial (something like that) allot, cp. to purchase option. Otherwise diesel is right as far as restoring via your purchase history.
Here is a review of Music Rescue. -
My hard drive crashed and I lost everything on my Mac desk top, including my Adobe Lightroom. I had my hard drive replaced but how do I download to my new hard drive? I have my previous serial number but when I entered that, it said it was invalid.
Lightroom - all versions
Windows
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Windows
Mac
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Contact Adobe Support by chat for serial number issues:
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC ) -
Hi there, I have a problem with my iPod Classic (from 2009). Everytime I connect it to my computer (Windows), iTunes does not work anymore. Music is automatically deleted on my iPod. Any suggestions please?
Thanks, for info, iPod Classic is a slower machine compared the Nano, unfortunately, if you read these discussions, majority of the freezes involved iTunes 10. Although if might be just slow and some impatient user just disconnect the iPod ands cause more problems. ( Yes I also did that but safely by doing a iPod Hard Reset, before disconnecting).
Here is the Apple support article that may help you.
http://support.apple.com/kb/TS1717
or my usual solution for Windows Users.
Antivirus has a tendency to freeze iTunes sync Operation with iPod Classic, causing a timeout, which corrupt your iPod filesystem, so when iTunes can't read the iPod, it is pointing to this problem. Other causes is when your iPod hardisk is dying, or your battery is dying causing hardisk crashes.
My suggestion.
Connect your iPod to the PC and run chkdsk, to fix any iPod diskerror, then disconnect it, after chkdsk complete.
Disconnect your PC from Internet. (just to make sure no nasties creep into your system while you syncing.
Stop the Antivirus program
Connect your iPod to the PC, using a high speed USB 2.0 port at the back of your PC, do not use any USB Hub.
When iTunes Open up, Restore your iPod please, this is for iTunes to map correctly, to fix the corrupted filesystem.
When Restore complete, eject the iPod and reconnect again.
Sync your ipod, preferably manually Manage in small batches and disconnect after every batch, to check that all is well.
When all sync is complete, and iPod disconnected, start back your Antivirus and connect back the Internet.
Good Luck! -
I set up Firefox sync from my old computer. This has had its hard drive replaced and been sold. I now want to retrieve the information and get my bookmarks on my new computer. I can't see any way to do this!
Help pleaseTo build on the second option provided by The Edmeister make sure that you have your Sync Key, if this is not the case Firefox Sync will not help you (data is encrypted with that Key).
Finally, if the last sync happened long time ago, it may be the case that your data is not on the servers anymore. Firefox Syn wasn't designed as a back up service.
Maybe you are looking for
-
When I send a message using iMessage to a contact's email, the message (whether independent or to a group) is being delivered in their email inbox instead of their iMessage application. Is there any resolution to this issue?
-
Problems connecting to itunes store after downloading itunes 7
is anyone else still having problems accessing the itunes store after upgrading to itunes 7? i literally downloaded itunes 7 tonight and immediately started having problems accessing the store. definitely wish i had not clicked "yes" to upgrade. DOES
-
Beim cs2 bridge geht camera raw nicht
beim cs2 bridge geht camera raw nicht
-
Hi guys, I am in a limite of nervous attach!!!!! Please help me.... The problem is: I create a interface that change the table columns, based on a Combobox selecting another table. Just for visualize the table from my DB. This code don�t update my ta
-
I've been having a problem with my app that is designed to take an image, scale it into 3 different sizes and then save it. The problem seems to be that the image doesn't load correctly as when I look at the width and height of it, they come back as